NetBSD/sys/dev/pci/optiide.c

271 lines
8.5 KiB
C

/* $NetBSD: optiide.c,v 1.10 2004/08/21 00:28:34 thorpej Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pciidereg.h>
#include <dev/pci/pciidevar.h>
#include <dev/pci/pciide_opti_reg.h>
static void opti_chip_map(struct pciide_softc*, struct pci_attach_args*);
static void opti_setup_channel(struct ata_channel*);
static int optiide_match(struct device *, struct cfdata *, void *);
static void optiide_attach(struct device *, struct device *, void *);
CFATTACH_DECL(optiide, sizeof(struct pciide_softc),
optiide_match, optiide_attach, NULL, NULL);
static const struct pciide_product_desc pciide_opti_products[] = {
{ PCI_PRODUCT_OPTI_82C621,
0,
"OPTi 82c621 PCI IDE controller",
opti_chip_map,
},
{ PCI_PRODUCT_OPTI_82C568,
0,
"OPTi 82c568 (82c621 compatible) PCI IDE controller",
opti_chip_map,
},
{ PCI_PRODUCT_OPTI_82D568,
0,
"OPTi 82d568 (82c621 compatible) PCI IDE controller",
opti_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
static int
optiide_match(struct device *parent, struct cfdata *match, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_OPTI &&
PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
if (pciide_lookup_product(pa->pa_id, pciide_opti_products))
return (2);
}
return (0);
}
static void
optiide_attach(struct device *parent, struct device *self, void *aux)
{
struct pci_attach_args *pa = aux;
struct pciide_softc *sc = (struct pciide_softc *)self;
pciide_common_attach(sc, pa,
pciide_lookup_product(pa->pa_id, pciide_opti_products));
}
static void
opti_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
{
struct pciide_channel *cp;
bus_size_t cmdsize, ctlsize;
pcireg_t interface;
u_int8_t init_ctrl;
int channel;
if (pciide_chipen(sc, pa) == 0)
return;
aprint_normal("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
/*
* XXXSCW:
* There seem to be a couple of buggy revisions/implementations
* of the OPTi pciide chipset. This kludge seems to fix one of
* the reported problems (PR/11644) but still fails for the
* other (PR/13151), although the latter may be due to other
* issues too...
*/
if (PCI_REVISION(pa->pa_class) <= 0x12) {
aprint_normal(" but disabled due to chip rev. <= 0x12");
sc->sc_dma_ok = 0;
} else
pciide_mapreg_dma(sc, pa);
aprint_normal("\n");
sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA32 | ATAC_CAP_DATA16;
sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
sc->sc_wdcdev.irqack = pciide_irqack;
sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
}
sc->sc_wdcdev.sc_atac.atac_set_modes = opti_setup_channel;
sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag,
OPTI_REG_INIT_CONTROL);
interface = PCI_INTERFACE(pa->pa_class);
wdc_allocate_regs(&sc->sc_wdcdev);
for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if (channel == 1 &&
(init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) {
aprint_normal("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cp->name);
cp->ata_channel.ch_flags |= ATACH_DISABLED;
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
}
}
static void
opti_setup_channel(struct ata_channel *chp)
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
int drive, spd, s;
int mode[2];
u_int8_t rv, mr;
/*
* The `Delay' and `Address Setup Time' fields of the
* Miscellaneous Register are always zero initially.
*/
mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK;
mr &= ~(OPTI_MISC_DELAY_MASK |
OPTI_MISC_ADDR_SETUP_MASK |
OPTI_MISC_INDEX_MASK);
/* Prime the control register before setting timing values */
opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE);
/* Determine the clockrate of the PCIbus the chip is attached to */
spd = (int) opti_read_config(chp, OPTI_REG_STRAP);
spd &= OPTI_STRAP_PCI_SPEED_MASK;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0) {
mode[drive] = -1;
continue;
}
if ((drvp->drive_flags & DRIVE_DMA)) {
/*
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed
*/
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
drvp->PIO_mode = drvp->DMA_mode + 2;
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
drvp->PIO_mode - 2 : 0;
if (drvp->DMA_mode == 0)
drvp->PIO_mode = 0;
mode[drive] = drvp->DMA_mode + 5;
} else
mode[drive] = drvp->PIO_mode;
if (drive && mode[0] >= 0 &&
(opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) {
/*
* Can't have two drives using different values
* for `Address Setup Time'.
* Slow down the faster drive to compensate.
*/
int d = (opti_tim_as[spd][mode[0]] >
opti_tim_as[spd][mode[1]]) ? 0 : 1;
mode[d] = mode[1-d];
chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode;
chp->ch_drive[d].DMA_mode = 0;
s = splbio();
chp->ch_drive[d].drive_flags &= ~DRIVE_DMA;
splx(s);
}
}
for (drive = 0; drive < 2; drive++) {
int m;
if ((m = mode[drive]) < 0)
continue;
/* Set the Address Setup Time and select appropriate index */
rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT;
rv |= OPTI_MISC_INDEX(drive);
opti_write_config(chp, OPTI_REG_MISC, mr | rv);
/* Set the pulse width and recovery timing parameters */
rv = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT;
rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT;
opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv);
opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv);
/* Set the Enhanced Mode register appropriately */
rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE);
rv &= ~OPTI_ENH_MODE_MASK(chp->ch_channel, drive);
rv |= OPTI_ENH_MODE(chp->ch_channel, drive, opti_tim_em[m]);
pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv);
}
/* Finally, enable the timings */
opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE);
}