NetBSD/sys/arch/hpcsh/conf/JORNADA690

141 lines
3.7 KiB
Plaintext

# $NetBSD: JORNADA690,v 1.10 2001/07/14 17:02:57 kanaoka Exp $
#
# JORNADA690 uch's Jornada 690
#
include "arch/hpcsh/conf/std.hpcsh"
maxusers 32 # estimated number of users
options SH7709A # 133MHz
options SH7709A_BROKEN_IPR
options PCLOCK=22000000 # 22MHz
options DDB # in-kernel debugger
options DIAGNOSTIC # extra kernel debugging checks
options DEBUG # extra kernel debugging support
options KTRACE # system call tracing support
options MSGBUFSIZE=65534
# Standard system options
options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
options HZ=50 # clock interrupt generates every 1/HZ sec
# Compatibility options
options COMPAT_43
options SCSIVERBOSE # human readable SCSI error messages
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
# Executable format options
options EXEC_COFF # 32-bit COFF executables
options EXEC_ELF32 # 32-bit ELF executables
# File systems
file-system FFS # UFS
file-system MSDOSFS # MS-DOS file system
file-system MFS # memory file system
file-system NFS # Sun NFS-compatible filesystem client
file-system UNION # union file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system PROCFS # /proc
# File system options
# Networking options
options INET # IP + ICMP + TCP + UDP
options NFS_BOOT_DHCP
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
options WSEMUL_VT100
options WSDISPLAY_DEFAULTSCREENS=4
options FONT_VT220L8x10
options WS_KERNEL_FG=WSCOL_BROWN
options WS_KERNEL_BG=WSCOL_BLUE
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
#
# Device configuration
#
mainbus0 at root
shb* at mainbus?
# Workstation Console attachments
bivideo0 at mainbus0
hpcfb* at bivideo0
wsdisplay* at hpcfb?
pfckbd* at mainbus?
hpckbd* at pfckbd?
wskbd* at hpckbd? mux 1
# Serial Devices
# don't need to define SCICONSOLE. you can select from bootloader.
options SCIFCN_SPEED=19200
scif0 at shb? port 0xa4000008 irq 12
hd64461if* at shb? irq 4
hd64461pcmcia* at hd64461if?
com* at hd64461if?
# PCMCIA bus support
pcmcia0 at hd64461pcmcia? controller 0 socket ? # I/O card, memory card
pcmcia1 at hd64461pcmcia? controller 1 socket ? # memory card only
# PCMCIA network interfaces
ne* at pcmcia0 function ? # NE2000-compatible Ethernet
ep* at pcmcia0 function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia0 function ? # MB8696x based Ethernet
#wi* at pcmcia0 function ? # Lucent WaveLan IEEE (802.11)
#mhzc* at pcmcia0 function ? # Megahertz Ethernet/Modem combo cards
#com* at mhzc?
#sm* at mhzc?
ukphy* at mii? phy ? # generic unknown PHYs
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
# PCMCIA SCSI interfaces
#aic* at pcmcia0 function ? # Adaptec APA-1460 SCSI
#scsibus* at aic?
# PCMCIA IDE disk
# PC-Card slot
wdc1 at pcmcia0 function ?
wd* at wdc1 channel ? drive ? flags 0x0000
# Compact Flash slot (only memory mapped mode CF can attach)
wdc0 at pcmcia1 function ?
wd* at wdc0 channel ? drive ? flags 0x0000
# SCSI devices
#sd* at scsibus? target ? lun ? # SCSI disk drives
# Network Interfaces
# Pseudo-Devices
pseudo-device biconsdev 1 # build-in console device
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device rnd # /dev/random and in-kernel generator
# mouse & keyboard multiplexor pseudo-devices
pseudo-device wsmux 2