| .. |
|
Makefile
|
…
|
|
|
ac100.c
|
No need to check cold to add I2C_F_POLL; the i2c API does it for us now.
|
2019-07-27 16:02:27 +00:00 |
|
act8846.c
|
No need to check cold to add I2C_F_POLL; the i2c API does it for us now.
|
2019-07-27 16:02:27 +00:00 |
|
act8846.h
|
…
|
|
|
adadc.c
|
explicitly initialize sensor->state
|
2019-06-15 02:00:21 +00:00 |
|
adm1021.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
adm1026.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
adm1026reg.h
|
set ADM1026_ADDRMASK as 0x2f, not 0x3f8.
|
2019-10-13 07:44:51 +00:00 |
|
am2315.c
|
Oops, another one.
|
2018-06-17 01:08:15 +00:00 |
|
am2315reg.h
|
add RCSID's
|
2017-12-29 02:20:47 +00:00 |
|
am2315var.h
|
add RCSID's
|
2017-12-29 02:20:47 +00:00 |
|
anxedp.c
|
Broadcast PMF display on/off events when our connector is handling dpms so we can turn off the backlight
|
2019-02-03 13:56:38 +00:00 |
|
as3722.c
|
No need to check cold to add I2C_F_POLL; the i2c API does it for us now.
|
2019-07-27 16:02:27 +00:00 |
|
as3722.h
|
…
|
|
|
at24cxx.c
|
Support more than 128Kbit model.
|
2019-11-29 04:59:15 +00:00 |
|
at24cxxvar.h
|
…
|
|
|
au8522.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
au8522mod.h
|
…
|
|
|
au8522mod_8vsb.h
|
…
|
|
|
au8522mod_qam64.h
|
…
|
|
|
au8522mod_qam256.h
|
…
|
|
|
au8522reg.h
|
…
|
|
|
au8522var.h
|
…
|
|
|
axp20x.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
axp20xvar.h
|
Hook axp20x into fdt regulator api
|
2017-10-07 18:22:06 +00:00 |
|
axp22x.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
axp809.c
|
No need to check cold to add I2C_F_POLL; the i2c API does it for us now.
|
2019-07-27 16:02:27 +00:00 |
|
axp809.h
|
…
|
|
|
axppmic.c
|
Add support for devices with separate "init" and "default" pinctrl states.
|
2019-10-01 23:32:52 +00:00 |
|
cx24227.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
cx24227var.h
|
…
|
|
|
dbcool.c
|
Change a aprint_verbose into aprint_debug - the message does not add
|
2019-02-06 08:37:12 +00:00 |
|
dbcool_reg.h
|
…
|
|
|
dbcool_var.h
|
…
|
|
|
ddc.c
|
Rename min/max -> uimin/uimax for better honesty.
|
2018-09-03 16:29:22 +00:00 |
|
ddcreg.h
|
Add a definition for the DDC segment address (30h).
|
2019-01-27 11:41:52 +00:00 |
|
ddcvar.h
|
…
|
|
|
ds1307.c
|
appease -Werror=stack-protector by avoiding variable sized arrays
|
2019-09-29 05:35:29 +00:00 |
|
ds1307reg.h
|
add support for the MCP7940 based Pi Face Real Time Clock
|
2016-10-18 18:54:54 +00:00 |
|
dstemp.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
em3027.c
|
No need to check cold to add I2C_F_POLL; the i2c API does it for us now.
|
2019-07-27 16:02:27 +00:00 |
|
em3027reg.h
|
Driver for EM Microelectronic EM3027 RTC and temperature sensor.
|
2018-01-05 03:07:15 +00:00 |
|
fan53555.c
|
match DIE_ID of 9 (SILERGY_DIE_ID_SYR83X), seen on some rockpro64s.
|
2019-11-12 07:40:04 +00:00 |
|
fcu.c
|
explicitly initialize sensor->state
|
2019-06-15 02:00:21 +00:00 |
|
files.i2c
|
Add driver for NXP TDA19988 HDMI encoder
|
2019-11-03 22:57:52 +00:00 |
|
g760a.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
g760areg.h
|
…
|
|
|
gttwsi_core.c
|
Expand code covered by sc->sc_mtx, to make sure an interrupt would not be
|
2018-10-01 09:39:20 +00:00 |
|
gttwsireg.h
|
…
|
|
|
gttwsivar.h
|
Don't sleep with IPL_VM lock held.
|
2018-05-07 15:03:19 +00:00 |
|
hytp14.c
|
enable FDT direct configuration.
|
2019-10-08 21:16:11 +00:00 |
|
hytp14reg.h
|
acknowleg -> acknowledg, proceedure -> procedure.
|
2016-12-12 15:58:44 +00:00 |
|
hytp14var.h
|
convert device polling from callout to kthread.
|
2016-07-03 12:26:55 +00:00 |
|
i2c.c
|
touch match_result only on success.
|
2019-03-26 09:20:38 +00:00 |
|
i2c_bitbang.c
|
…
|
|
|
i2c_bitbang.h
|
…
|
|
|
i2c_exec.c
|
If cold, automagically set I2C_F_POLL.
|
2019-07-25 04:20:13 +00:00 |
|
i2c_io.h
|
Add some #includes to make a few more header files compile.
|
2017-10-28 06:27:32 +00:00 |
|
i2c_subr.c
|
…
|
|
|
i2cvar.h
|
Make i2c_acquire_bus() / i2c_release_bus() real symbols.
|
2018-12-10 00:31:45 +00:00 |
|
ibmhawk.c
|
Rename min/max -> uimin/uimax for better honesty.
|
2018-09-03 16:29:22 +00:00 |
|
ibmhawkreg.h
|
…
|
|
|
ibmhawkvar.h
|
…
|
|
|
ihidev.c
|
in many device attach paths, allocate memory with KM_SLEEP instead of KM_NOSLEEP
|
2019-10-01 18:00:07 +00:00 |
|
ihidev.h
|
Add drivers for HID over I2C devices, and a driver for I2C mices.
|
2017-12-10 17:05:54 +00:00 |
|
ims.c
|
Enable finger touch panel of HP Spectre x360 13-inch ae019TU
|
2019-07-09 12:56:30 +00:00 |
|
lg3303.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
lg3303var.h
|
…
|
|
|
lm75.c
|
moar match string
|
2019-02-20 18:19:46 +00:00 |
|
lm75reg.h
|
…
|
|
|
lm87.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
lm_i2c.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
m41st84.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
m41st84reg.h
|
…
|
|
|
m41st84var.h
|
…
|
|
|
m41t00.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
m41t00reg.h
|
…
|
|
|
max6900.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
max6900reg.h
|
…
|
|
|
max77620.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
mcp980x.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
mcp980xreg.h
|
…
|
|
|
motoi2c.c
|
Add wait for stop condition.
|
2019-11-29 12:42:53 +00:00 |
|
motoi2creg.h
|
…
|
|
|
motoi2cvar.h
|
Add support FDT.
|
2019-08-05 12:21:00 +00:00 |
|
mpl115a.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
mpl115areg.h
|
…
|
|
|
mt2131.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
mt2131var.h
|
…
|
|
|
nxt2k.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
nxt2kvar.h
|
…
|
|
|
pca9685.c
|
Do the iic_acquire_bus() / iic_release_bus() dance that I, um, forgot
|
2019-07-25 04:24:44 +00:00 |
|
pca9685reg.h
|
Add a driver for the NXP PCA9685 16-channel, 12-bit PWM Fm+ LED controller.
|
2019-07-24 05:25:32 +00:00 |
|
pcf8563.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
pcf8563reg.h
|
…
|
|
|
pcf8583.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
pcf8583reg.h
|
…
|
|
|
pcf8583var.h
|
…
|
|
|
r2025.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
r2025reg.h
|
…
|
|
|
rkpmic.c
|
rkpmic: correct delay
|
2019-09-18 15:12:37 +00:00 |
|
rs5c372.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
rs5c372reg.h
|
…
|
|
|
s390.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
s390reg.h
|
…
|
|
|
sdtemp.c
|
in many device attach paths, allocate memory with KM_SLEEP instead of KM_NOSLEEP
|
2019-10-01 18:00:07 +00:00 |
|
sdtemp_reg.h
|
- Add Maxim MAX6604.
|
2018-02-22 10:09:12 +00:00 |
|
sgsmix.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
sgsmixvar.h
|
…
|
|
|
si70xx.c
|
add missing break.
|
2019-02-03 12:18:21 +00:00 |
|
si70xxreg.h
|
add RCSID's
|
2017-12-29 02:20:47 +00:00 |
|
si70xxvar.h
|
add RCSID's
|
2017-12-29 02:20:47 +00:00 |
|
smscmon.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
smscmonvar.h
|
…
|
|
|
spdmem_i2c.c
|
match "i2c-at34c02", found in various sparc64 boxes
|
2018-10-20 03:23:05 +00:00 |
|
ssdfb_i2c.c
|
ssdfb: fix i2c transfer error with some controllers
|
2019-11-05 19:59:35 +00:00 |
|
sy8106a.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
tcagpio.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
tcakp.c
|
lock/unlock I2C bus around transfers as required by API
|
2018-10-17 16:56:40 +00:00 |
|
tda19988.c
|
Speed up mode setting a bit and turn off the display while changing modes
|
2019-11-04 10:02:39 +00:00 |
|
tea5767.c
|
Add TEA5767 FM radio driver. From Karuna Grewal.
|
2018-07-27 12:02:25 +00:00 |
|
tea5767reg.h
|
Add TEA5767 FM radio driver. From Karuna Grewal.
|
2018-07-27 12:02:25 +00:00 |
|
titemp.c
|
In my quest to make device_compatible_entry (and associated goo)
|
2018-06-26 06:03:57 +00:00 |
|
tps65217pmic.c
|
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
|
2019-11-03 22:55:34 +00:00 |
|
tps65217pmicreg.h
|
…
|
|
|
tps65217pmicvar.h
|
…
|
|
|
tsl256x.c
|
The i2c code handles the 'cold' dance with I2C_F_POLL now; no need to
|
2019-07-25 04:25:40 +00:00 |
|
tsl256xreg.h
|
Add a driver for the Taos TSL256x light sensors.
|
2018-05-27 05:31:20 +00:00 |
|
tvpll.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
tvpll_tuners.c
|
…
|
|
|
tvpll_tuners.h
|
…
|
|
|
tvpllvar.h
|
…
|
|
|
twl4030.c
|
Fix non-FDT build
|
2019-11-03 09:34:09 +00:00 |
|
w83795g.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
w83795greg.h
|
…
|
|
|
x1226.c
|
More cleanup to i2c autoconfiguration:
|
2018-06-16 21:22:13 +00:00 |
|
x1226reg.h
|
…
|
|
|
xc5k.c
|
Rename min/max -> uimin/uimax for better honesty.
|
2018-09-03 16:29:22 +00:00 |
|
xc5kreg.h
|
…
|
|
|
xc5kvar.h
|
…
|
|
|
xc3028.c
|
Rename min/max -> uimin/uimax for better honesty.
|
2018-09-03 16:29:22 +00:00 |
|
xc3028reg.h
|
…
|
|
|
xc3028var.h
|
…
|
|
|
zl10353.c
|
remove checks for failure after memory allocation calls that cannot fail:
|
2017-06-01 02:45:05 +00:00 |
|
zl10353reg.h
|
…
|
|
|
zl10353var.h
|
…
|
|
6860aa100a