NetBSD/sys/arch/pc532/dev/oldncr.c

959 lines
23 KiB
C

/* $NetBSD: oldncr.c,v 1.4 1996/08/28 19:00:27 cgd Exp $ */
/*
* Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo,
* Michael L. Finch, Bradley A. Grantham, and
* Lawrence A. Kesteloot
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the Alice Group.
* 4. The names of the Alice Group or any of its members may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Modified for use with the pc532 by Phil Nelson, June 94. */
#define PSEUDO_DMA 1
static int ncr_debug=1;
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/device.h>
#include <scsi/scsi_all.h>
#include <scsi/scsi_debug.h>
#include <scsi/scsiconf.h>
#include <machine/icu.h>
#include "ncr_defs.h"
#include "ncr_5380.h"
#define NCR5380 DP8490
#define SCI_PHASE_DISC 0 /* sort of ... */
#define SCI_CLR_INTR(regs) {register int temp = regs->sci_iack;}
#define SCI_ACK(ptr,phase) (ptr)->sci_tcmd = (phase)
#define SCSI_TIMEOUT_VAL 10000000
#define WAIT_FOR_NOT_REQ(ptr) { \
int scsi_timeout = SCSI_TIMEOUT_VAL; \
while ( ((ptr)->sci_bus_csr & SCI_BUS_REQ) && \
((ptr)->sci_bus_csr & SCI_BUS_REQ) && \
((ptr)->sci_bus_csr & SCI_BUS_REQ) && \
(--scsi_timeout) ); \
if (!scsi_timeout) { \
printf("scsi timeout--WAIT_FOR_NOT_REQ---ncr.c, \
line %d.\n", __LINE__); \
goto scsi_timeout_error; \
} \
}
#define WAIT_FOR_REQ(ptr) { \
int scsi_timeout = SCSI_TIMEOUT_VAL; \
while ( (((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \
(((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \
(((ptr)->sci_bus_csr & SCI_BUS_REQ) == 0) && \
(--scsi_timeout) ); \
if (!scsi_timeout) { \
printf("scsi timeout--WAIT_FOR_REQ---ncr.c, \
line %d.\n", __LINE__); \
goto scsi_timeout_error; \
} \
}
#define WAIT_FOR_BSY(ptr) { \
int scsi_timeout = SCSI_TIMEOUT_VAL; \
while ((((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \
(((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \
(((ptr)->sci_bus_csr & SCI_BUS_BSY) == 0) && \
(--scsi_timeout) ); \
if (!scsi_timeout) { \
printf("scsi timeout--WAIT_FOR_BSY---ncr.c, \
line %d.\n", __LINE__); \
goto scsi_timeout_error; \
} \
}
#ifdef DDB
int Debugger();
#else
#define Debugger() panic("Should call Debugger here (mac/dev/ncr.c).")
#endif
typedef unsigned long int physaddr;
typedef sci_regmap_t sci_padded_regmap_t;
#define NNCR5380 1
struct ncr5380_softc {
struct device sc_dev;
struct scsi_link sc_link;
};
/* From the mapping of the pc532 address space. See pc532/machdep.c */
static volatile sci_padded_regmap_t *ncr = (sci_regmap_t *) 0xffd00000;
static volatile long *sci_4byte_addr= (long *) 0xffe00000;
static volatile u_char *sci_1byte_addr=(u_char *) 0xffe00000;
static void ncr5380_minphys(struct buf *bp);
static int ncr5380_scsi_cmd(struct scsi_xfer *xs);
static int ncr5380_show_scsi_cmd(struct scsi_xfer *xs);
static int ncr5380_reset_target(int adapter, int target);
static int ncr5380_poll(int adapter, int timeout);
static int ncr5380_send_cmd(struct scsi_xfer *xs);
extern void ncr5380_intr(int adapter);
extern void spinwait(int);
static int scsi_gen(int adapter, int id, int lun,
struct scsi_generic *cmd, int cmdlen,
void *databuf, int datalen);
static int scsi_group0(int adapter, int id, int lun,
int opcode, int addr, int len,
int flags, caddr_t databuf, int datalen);
static char scsi_name[] = "ncr";
struct scsi_adapter ncr5380_switch = {
ncr5380_scsi_cmd, /* scsi_cmd() */
ncr5380_minphys, /* scsi_minphys() */
0, /* open_target_lu() */
0 /* close_target_lu() */
};
/* This is copied from julian's bt driver */
/* "so we have a default dev struct for our link struct." */
struct scsi_device ncr_dev = {
NULL, /* Use default error handler. */
NULL, /* have a queue, served by this (?) */
NULL, /* have no async handler. */
NULL /* Use default "done" routine. */
};
extern int matchbyname();
static int ncrprobe();
static void ncrattach();
struct cfdriver oldncr_ca = {
sizeof(struct ncr5380_softc), ncrprobe, ncrattach
};
struct cfdriver oldncr_cd = {
NULL, "ncr", DV_DULL, NULL, 0
};
static int
ncrprobe(parent, self, aux)
struct device *parent, *self;
void *aux;
{
/* int unit = cf->cf_unit; */
struct ncr5380_softc *ncr5380 = (void *)self;
#if 0
DELETE THIS ????
if (unit >= NNCR5380) {
printf("ncr5380attach: unit %d more than %d configured.\n",
unit+1, NNCR5380);
return 0;
}
ncr5380 = malloc(sizeof(struct ncr5380_data), M_TEMP, M_NOWAIT);
if (!ncr5380) {
printf("ncr5380attach: Can't malloc.\n");
return 0;
}
bzero(ncr5380, sizeof(*ncr5380));
ncr5380data[unit] = ncr5380;
#endif
/* If we call this, we need to add SPL_DP to the bio mask! */
/* PL_bio |= SPL_DP; Not yet ... no interrupts */
return 1;
}
static void
ncrattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
register volatile sci_padded_regmap_t *regs = ncr;
struct ncr5380_softc *ncr5380 = (void *)self;
int r;
ncr5380->sc_link.channel = SCSI_CHANNEL_ONLY_ONE;
ncr5380->sc_link.adapter_softc = ncr5380;
/* ncr5380->sc_link.scsibus = 0; */
ncr5380->sc_link.adapter_target = 7;
ncr5380->sc_link.adapter = &ncr5380_switch;
ncr5380->sc_link.device = &ncr_dev;
ncr5380->sc_link.openings = 1;
printf("\n");
config_found(self, &(ncr5380->sc_link), scsiprint);
}
#define MIN_PHYS 65536 /*BARF!!!!*/
static void
ncr5380_minphys(struct buf *bp)
{
if (bp->b_bcount > MIN_PHYS) {
printf("Uh-oh... ncr5380_minphys setting bp->b_bcount = %x.\n", MIN_PHYS);
bp->b_bcount = MIN_PHYS;
}
minphys(bp);
}
#undef MIN_PHYS
static int
ncr5380_scsi_cmd(struct scsi_xfer *xs)
{
int flags, s, r;
flags = xs->flags;
if (xs->bp) flags |= (SCSI_NOSLEEP);
if ( flags & ITSDONE ) {
printf("Already done?");
xs->flags &= ~ITSDONE;
}
if ( ! ( flags & INUSE ) ) {
printf("Not in use?");
xs->flags |= INUSE;
}
if ( flags & SCSI_RESET ) {
printf("flags & SCSIRESET.\n");
s = splbio();
ncr5380_reset_target(xs->sc_link->scsibus,
xs->sc_link->target);
splx(s);
return(COMPLETE);
}
xs->resid = 0; /* Default value? */
r = ncr5380_send_cmd(xs);
xs->flags |= ITSDONE;
scsi_done(xs);
switch(r) {
case COMPLETE: case SUCCESSFULLY_QUEUED:
r = SUCCESSFULLY_QUEUED;
if (xs->flags&SCSI_POLL)
r = COMPLETE;
break;
default:
break;
}
return r;
}
static int
ncr5380_show_scsi_cmd(struct scsi_xfer *xs)
{
u_char *b = (u_char *) xs->cmd;
int i = 0;
if ( ! ( xs->flags & SCSI_RESET ) ) {
printf("ncr5380(%d:%d:%d)-",
xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun);
while (i < xs->cmdlen) {
if (i) printf(",");
printf("%x",b[i++]);
}
printf("-\n");
} else {
printf("ncr5380(%d:%d:%d)-RESET-\n",
xs->sc_link->scsibus, xs->sc_link->target, xs->sc_link->lun);
}
}
/*
* Actual chip control.
*/
void
delay(int timeo)
{
int len;
for (len=0;len<timeo*2;len++);
}
#if 0
extern void
spinwait(int ms)
{
while (ms--)
delay(500);
}
#endif
extern void
ncr5380_intr(int adapter)
{
register volatile sci_padded_regmap_t *regs = ncr;
SCI_CLR_INTR(regs);
regs->sci_mode = 0x00;
}
extern int
scsi_irq_intr(void)
{
register volatile sci_padded_regmap_t *regs = ncr;
/* if (regs->sci_csr != SCI_CSR_PHASE_MATCH)
printf("scsi_irq_intr called (not just phase match -- "
"csr = 0x%x, bus_csr = 0x%x).\n",
regs->sci_csr, regs->sci_bus_csr);
ncr5380_intr(0); */
return 1;
}
extern int
scsi_drq_intr(void)
{
/* printf("scsi_drq_intr called.\n"); */
/* ncr5380_intr(0); */
return 1;
}
static int
ncr5380_reset_target(int adapter, int target)
{
register volatile sci_padded_regmap_t *regs = ncr;
int dummy;
scsi_select_ctlr (DP8490);
regs->sci_icmd = SCI_ICMD_TEST;
regs->sci_icmd = SCI_ICMD_TEST | SCI_ICMD_RST;
delay(2500);
regs->sci_icmd = 0;
regs->sci_mode = 0;
regs->sci_tcmd = SCI_PHASE_DISC;
regs->sci_sel_enb = 0;
SCI_CLR_INTR(regs);
SCI_CLR_INTR(regs);
}
static int
ncr5380_send_cmd(struct scsi_xfer *xs)
{
int s, i, sense;
#if 0
ncr5380_show_scsi_cmd(xs);
#endif
s = splbio();
sense = scsi_gen( xs->sc_link->scsibus, xs->sc_link->target,
xs->sc_link->lun, xs->cmd, xs->cmdlen,
xs->data, xs->datalen );
splx(s);
switch (sense) {
case 0x00:
xs->error = XS_NOERROR;
return (COMPLETE);
case 0x02: /* Check condition */
for (i = 10; i; i--) {
s = splbio();
sense = scsi_group0(xs->sc_link->scsibus,
xs->sc_link->target,
xs->sc_link->lun,
0x3, 0x0,
sizeof(struct scsi_sense_data),
0, (caddr_t) &(xs->sense),
sizeof(struct scsi_sense_data));
splx(s);
if (sense == 0) break;
if (sense == 8
&& (xs->flags & SCSI_NOSLEEP) == 0)
tsleep((caddr_t)&lbolt, PRIBIO, "ncrbusy", 0);
}
if (!i)
printf("ncr(%d:%d): Sense failed (dev busy)\n",
xs->sc_link->target, xs->sc_link->lun);
xs->error = XS_SENSE;
return COMPLETE;
case 0x08: /* Busy */
xs->error = XS_BUSY;
return COMPLETE;
default:
xs->error = XS_DRIVER_STUFFUP;
return COMPLETE;
}
}
static int
select_target(register volatile sci_padded_regmap_t *regs,
u_char myid, u_char tid, int with_atn)
{
register u_char bid, icmd;
int ret = SCSI_RET_RETRY;
if ((regs->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL)) &&
(regs->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL)) &&
(regs->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL)))
return ret;
/* for our purposes.. */
myid = 1 << myid;
tid = 1 << tid;
regs->sci_sel_enb = 0; /*myid; we don't want any interrupts. */
regs->sci_tcmd = 0; /* get into a harmless state */
regs->sci_mode = 0; /* get into a harmless state */
regs->sci_odata = myid;
regs->sci_mode = SCI_MODE_ARB;
/* regs->sci_mode |= SCI_MODE_ARB; */
/* AIP might not set if BSY went true after we checked */
for (bid = 0; bid < 20; bid++) /* 20usec circa */
if (regs->sci_icmd & SCI_ICMD_AIP)
break;
if ((regs->sci_icmd & SCI_ICMD_AIP) == 0) {
goto lost;
}
spinwait(2); /* 2.2us arb delay */
if (regs->sci_icmd & SCI_ICMD_LST) {
goto lost;
}
regs->sci_mode &= ~SCI_MODE_PAR_CHK;
bid = regs->sci_data;
if ((bid & ~myid) > myid) {
goto lost;
}
if (regs->sci_icmd & SCI_ICMD_LST) {
goto lost;
}
/* Won arbitration, enter selection phase now */
icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST);
icmd |= (with_atn ? (SCI_ICMD_SEL|SCI_ICMD_ATN) : SCI_ICMD_SEL);
icmd |= SCI_ICMD_BSY;
regs->sci_icmd = icmd;
if (regs->sci_icmd & SCI_ICMD_LST) {
goto nosel;
}
/* XXX a target that violates specs might still drive the bus XXX */
/* XXX should put our id out, and after the delay check nothi XXX */
/* XXX ng else is out there. XXX */
delay(0);
regs->sci_tcmd = 0;
regs->sci_odata = myid | tid;
regs->sci_sel_enb = 0;
/* regs->sci_mode &= ~SCI_MODE_ARB; 2 deskew delays, too */
regs->sci_mode = 0; /* 2 deskew delays, too */
icmd |= SCI_ICMD_DATA;
icmd &= ~(SCI_ICMD_BSY);
regs->sci_icmd = icmd;
/* bus settle delay, 400ns */
delay(2); /* too much (was 2) ? */
/* regs->sci_mode |= SCI_MODE_PAR_CHK; */
{
register int timeo = 2500;/* 250 msecs in 100 usecs chunks */
while ((regs->sci_bus_csr & SCI_BUS_BSY) == 0) {
if (--timeo > 0) {
delay(100);
} else {
goto nodev;
}
}
}
icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_SEL);
regs->sci_icmd = icmd;
/* regs->sci_sel_enb = myid;*/ /* looks like we should NOT have it */
return SCSI_RET_SUCCESS;
nodev:
ret = SCSI_RET_DEVICE_DOWN;
regs->sci_sel_enb = myid;
nosel:
icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_SEL|SCI_ICMD_ATN);
regs->sci_icmd = icmd;
lost:
regs->sci_mode = 0;
return ret;
}
sci_data_out(regs, phase, count, data)
register sci_padded_regmap_t *regs;
unsigned char *data;
{
register unsigned char icmd;
register int cnt=0;
/* ..checks.. */
icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST);
loop:
if (SCI_CUR_PHASE(regs->sci_bus_csr) != phase)
return cnt;
WAIT_FOR_REQ(regs);
icmd |= SCI_ICMD_DATA;
regs->sci_icmd = icmd;
regs->sci_odata = *data++;
icmd |= SCI_ICMD_ACK;
regs->sci_icmd = icmd;
icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_ACK);
WAIT_FOR_NOT_REQ(regs);
regs->sci_icmd = icmd;
++cnt;
if (--count > 0)
goto loop;
scsi_timeout_error:
return cnt;
}
sci_data_in(regs, phase, count, data)
register sci_padded_regmap_t *regs;
unsigned char *data;
{
register unsigned char icmd;
register int cnt=0;
/* ..checks.. */
icmd = regs->sci_icmd & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST);
loop:
if (SCI_CUR_PHASE(regs->sci_bus_csr) != phase)
return cnt;
WAIT_FOR_REQ(regs);
*data++ = regs->sci_data;
icmd |= SCI_ICMD_ACK;
regs->sci_icmd = icmd;
icmd &= ~SCI_ICMD_ACK;
WAIT_FOR_NOT_REQ(regs);
regs->sci_icmd = icmd;
++cnt;
if (--count > 0)
goto loop;
scsi_timeout_error:
return cnt;
}
static int
command_transfer(register volatile sci_padded_regmap_t *regs,
int maxlen, u_char *data, u_char *status, u_char *msg)
{
int xfer=0, phase;
/* printf("command_transfer called for 0x%x.\n", *data); */
regs->sci_icmd = 0;
while (1) {
WAIT_FOR_REQ(regs);
phase = SCI_CUR_PHASE(regs->sci_bus_csr);
switch (phase) {
case SCSI_PHASE_CMD:
SCI_ACK(regs,SCSI_PHASE_CMD);
xfer += sci_data_out(regs, SCSI_PHASE_CMD,
maxlen, data);
return xfer;
case SCSI_PHASE_DATA_IN:
printf("Data in phase in command_transfer?\n");
return 0;
case SCSI_PHASE_DATA_OUT:
printf("Data out phase in command_transfer?\n");
return 0;
case SCSI_PHASE_STATUS:
SCI_ACK(regs,SCSI_PHASE_STATUS);
printf("status in command_transfer.\n");
sci_data_in(regs, SCSI_PHASE_STATUS,
1, status);
break;
case SCSI_PHASE_MESSAGE_IN:
SCI_ACK(regs,SCSI_PHASE_MESSAGE_IN);
printf("msgin in command_transfer.\n");
sci_data_in(regs, SCSI_PHASE_MESSAGE_IN,
1, msg);
break;
case SCSI_PHASE_MESSAGE_OUT:
SCI_ACK(regs,SCSI_PHASE_MESSAGE_OUT);
sci_data_out(regs, SCSI_PHASE_MESSAGE_OUT,
1, msg);
break;
default:
printf("Unexpected phase 0x%x in "
"command_transfer().\n", phase);
scsi_timeout_error:
return xfer;
break;
}
}
}
static int
data_transfer(register volatile sci_padded_regmap_t *regs,
int maxlen, u_char *data, u_char *status, u_char *msg)
{
int retlen = 0, xfer, phase;
regs->sci_icmd = 0;
*status = 0;
while (1) {
WAIT_FOR_REQ(regs);
phase = SCI_CUR_PHASE(regs->sci_bus_csr);
switch (phase) {
case SCSI_PHASE_CMD:
printf("Command phase in data_transfer().\n");
return retlen;
case SCSI_PHASE_DATA_IN:
SCI_ACK(regs,SCSI_PHASE_DATA_IN);
#if PSEUDO_DMA
xfer = sci_pdma_in(regs, SCSI_PHASE_DATA_IN,
maxlen, data);
#else
xfer = sci_data_in(regs, SCSI_PHASE_DATA_IN,
maxlen, data);
#endif
retlen += xfer;
maxlen -= xfer;
break;
case SCSI_PHASE_DATA_OUT:
SCI_ACK(regs,SCSI_PHASE_DATA_OUT);
#if PSEUDO_DMA
xfer = sci_pdma_out(regs, SCSI_PHASE_DATA_OUT,
maxlen, data);
#else
xfer = sci_data_out(regs, SCSI_PHASE_DATA_OUT,
maxlen, data);
#endif
retlen += xfer;
maxlen -= xfer;
break;
case SCSI_PHASE_STATUS:
SCI_ACK(regs,SCSI_PHASE_STATUS);
sci_data_in(regs, SCSI_PHASE_STATUS,
1, status);
break;
case SCSI_PHASE_MESSAGE_IN:
SCI_ACK(regs,SCSI_PHASE_MESSAGE_IN);
sci_data_in(regs, SCSI_PHASE_MESSAGE_IN,
1, msg);
if (*msg == 0) {
return retlen;
} else {
printf( "message 0x%x in "
"data_transfer.\n", *msg);
}
break;
case SCSI_PHASE_MESSAGE_OUT:
SCI_ACK(regs,SCSI_PHASE_MESSAGE_OUT);
sci_data_out(regs, SCSI_PHASE_MESSAGE_OUT,
1, msg);
break;
default:
printf( "Unexpected phase 0x%x in "
"data_transfer().\n", phase);
scsi_timeout_error:
return retlen;
break;
}
}
}
static int
scsi_request(register volatile sci_padded_regmap_t *regs,
int target, int lun, u_char *cmd, int cmdlen,
char *databuf, int datalen, int *sent, int *ret)
{
/* Returns 0 on success, -1 on internal error, or the status byte */
int cmd_bytes_sent, r;
u_char stat, msg, c;
*sent = 0;
scsi_select_ctlr (DP8490);
if ( ( r = select_target(regs, 7, target, 1) ) != SCSI_RET_SUCCESS) {
*ret = r;
SCI_CLR_INTR(regs);
switch (r) {
case SCSI_RET_RETRY:
return 0x08;
default:
printf("select_target(target %d, lun %d) failed(%d).\n",
target, lun, r);
case SCSI_RET_DEVICE_DOWN:
return -1;
}
}
c = 0x80 | lun;
if ((cmd_bytes_sent = command_transfer(regs, cmdlen,
(u_char *) cmd, &stat, &c))
!= cmdlen) {
SCI_CLR_INTR(regs);
*ret = SCSI_RET_COMMAND_FAIL;
printf("Data underrun sending CCB (%d bytes of %d, sent).\n",
cmd_bytes_sent, cmdlen);
return -1;
}
*sent=data_transfer(regs, datalen, (u_char *)databuf,
&stat, &msg);
*ret = 0;
return stat;
}
static int
scsi_gen(int adapter, int id, int lun, struct scsi_generic *cmd,
int cmdlen, void *databuf, int datalen)
{
register volatile sci_padded_regmap_t *regs = ncr;
int i,j,sent,ret;
cmd->bytes[0] |= ((u_char) lun << 5);
i = scsi_request(regs, id, lun, (u_char *) cmd, cmdlen,
databuf, datalen, &sent, &ret);
return i;
}
static int
scsi_group0(int adapter, int id, int lun, int opcode, int addr, int len,
int flags, caddr_t databuf, int datalen)
{
register volatile sci_padded_regmap_t *regs = ncr;
unsigned char cmd[6];
int i,j,sent,ret;
cmd[0] = opcode; /* Operation code */
cmd[1] = (lun << 5) | ((addr >> 16) & 0x1F); /* Lun & MSB of addr */
cmd[2] = (addr >> 8) & 0xFF; /* addr */
cmd[3] = addr & 0xFF; /* LSB of addr */
cmd[4] = len; /* Allocation length */
cmd[5] = flags; /* Link/Flag */
i = scsi_request(regs, id, lun, cmd, 6, databuf, datalen, &sent, &ret);
return i;
}
/* pseudo-dma action */
#if PSEUDO_DMA
#define TIMEOUT 1000000
#define READY(poll) \
i = TIMEOUT; \
while ((regs->sci_csr & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) \
!=(SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) \
if ( !(regs->sci_csr & SCI_CSR_PHASE_MATCH) \
|| !(regs->sci_bus_csr & SCI_BUS_BSY) \
|| (i-- < 0) ) { \
printf("ncr.c: timeout counter = %d, len = %d count=%d (count-len %d).\n", \
i, len,count,count-len); \
printf("ncr_debug = %d, 1=out, 2=in",ncr_debug); \
/*dump_regs();*/ \
if (poll && !(regs->sci_csr & SCI_CSR_PHASE_MATCH)) { \
regs->sci_icmd &= ~SCI_ICMD_DATA; \
len--; \
} else { \
regs->sci_mode &= ~SCI_MODE_DMA; \
} \
return count-len; \
}
#define W1 *byte_data = *data++
#define W4 *long_data = *((long*)data)++
sci_pdma_out(regs, phase, count, data)
register volatile sci_padded_regmap_t *regs;
int phase;
int count;
u_char *data;
{
register volatile long *long_data = sci_4byte_addr;
register volatile u_char *byte_data = sci_1byte_addr;
register int len = count, i;
ncr_debug=1;
if (count < 128)
return sci_data_out(regs, phase, count, data);
WAIT_FOR_BSY(regs);
regs->sci_mode |= SCI_MODE_DMA;
regs->sci_icmd |= SCI_ICMD_DATA;
regs->sci_dma_send = 0;
while ( len >= 64 ) {
READY(1); W1; READY(1); W1; READY(1); W1; READY(1); W1;
READY(1);
W4;W4;W4; W4;W4;W4;W4; W4;W4;W4;W4; W4;W4;W4;W4;
len -= 64;
}
while (len) {
READY(1);
W1;
len--;
}
i = TIMEOUT;
while ( ((regs->sci_csr & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH))
== SCI_CSR_PHASE_MATCH) && --i);
if (!i)
printf("ncr.c:%d: timeout waiting for SCI_CSR_DREQ.\n", __LINE__);
*byte_data = 0;
scsi_timeout_error:
regs->sci_mode &= ~SCI_MODE_DMA;
return count-len;
}
#undef W1
#undef W4
#define R4 *((long *)data)++ = *long_data
#define R1 *data++ = *byte_data
sci_pdma_in(regs, phase, count, data)
register volatile sci_padded_regmap_t *regs;
int phase;
int count;
u_char *data;
{
register volatile long *long_data = sci_4byte_addr;
register volatile u_char *byte_data = sci_1byte_addr;
register int len = count, i;
ncr_debug=2;
if (count < 128)
return sci_data_in(regs, phase, count, data);
/* printf("Called sci_pdma_in(0x%x, 0x%x, %d, 0x%x.\n", regs, phase, count, data); */
WAIT_FOR_BSY(regs);
regs->sci_mode |= SCI_MODE_DMA;
regs->sci_icmd |= SCI_ICMD_DATA;
regs->sci_irecv = 0;
while (len >= 1024) {
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 128 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 256 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 384 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 512 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 640 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 768 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 896 */
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /*1024 */
len -= 1024;
}
while (len >= 128) {
READY(0);
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4;
R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 128 */
len -= 128;
}
while (len) {
READY(0);
R1;
len--;
}
scsi_timeout_error:
regs->sci_mode &= ~SCI_MODE_DMA;
return count - len;
}
#undef R4
#undef R1
#endif
/* Some stuff from dp.c ... */
#if 0
/* Select a SCSI device.
*/
int scsi_select_ctlr (int ctlr)
{
/* May need other stuff here to syncronize between dp & aic. */
RD_ADR (u_char, ICU_IO) &= ~ICU_SCSI_BIT; /* i/o, not port */
RD_ADR (u_char, ICU_DIR) &= ~ICU_SCSI_BIT; /* output */
if (ctlr == NCR5380)
RD_ADR (u_char, ICU_DATA) &= ~ICU_SCSI_BIT; /* select = 0 for 8490 */
else
RD_ADR (u_char, ICU_DATA) |= ICU_SCSI_BIT; /* select = 1 for AIC6250 */
}
#endif