NetBSD/distrib/arm32/ramdisk/inst.sh

1042 lines
23 KiB
Bash

#!/bin/sh
#
# $NetBSD: inst.sh,v 1.3 1999/01/25 23:34:21 garbled Exp $
#
# Copyright (c) 1995-1997 Mark Brinicombe
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed by Mark Brinicombe.
# 4. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Installation utilites (functions), to get NetBSD installed on
# the hard disk. These are meant to be invoked from the shell prompt,
# by people installing NetBSD.
#
VERSION="1.9"
Load_tape()
{
Set_Distrib_Dir
echo -n "Which tape drive will you be using? [rst0] "
read which
if [ "X$which" = "X" ]; then
which=rst0
fi
echo -n "Insert the tape into the tape drive and hit return to "
echo -n "continue..."
read foo
echo "Extracting files from the tape..."
pax -rvpe -f /dev/$which
echo "Done."
}
Get_Dest_Dir()
{
echo -n "Enter new path to dest directory [$dest_dir] "
read newdir
if [ ! "X$newdir" = "X" ]; then
dest_dir=$newdir
fi
}
Get_Distrib_Dir()
{
echo -n "Enter new path to distrib directory [$distribdir] "
read distribdir
if [ "X$distribdir" = "X" ]; then
distribdir=$destdir/usr/distrib
fi
if [ ! -d $distribdir ]; then
echo -n "$distribdir does not exist, create it [n] "
read yorn
if [ "$yorn" = "y" ]; then
mkdir $distribdir
fi
fi
}
Set_Distrib_Dir()
{
while [ ! -d $distribdir ]; do
echo "Directory $distribdir does not exist"
Get_Distrib_Dir
done
cd $distribdir
}
Load_Msdos_Fd()
{
echo "Loading sets from msdos floppies"
Set_Distrib_Dir
which=
while [ "$which" != "0" -a "$which" != "1" ]; do
echo -n "Read from which floppy drive ('0' or '1')? [0] "
read which
if [ "X$which" = "X" ]; then
which=0
fi
done
foo=
while [ "X$foo" = "X" ]; do
echo -n "Insert floppy (type s to stop, enter to load): "
read foo
if [ "X$foo" = "X" ]; then
mount -t msdos /dev/fd${which}a /mnt2
cp -rp /mnt2/* .
umount /mnt2
fi
done
}
Load_Tar_Fd()
{
echo "Loading sets from tar floppies"
Set_Distrib_Dir
which=
while [ "$which" != "0" -a "$which" != "1" ]; do
echo -n "Read from which floppy drive ('0' or '1')? [0] "
read which
if [ "X$which" = "X" ]; then
which=0
fi
done
foo=
while [ "X$foo" = "X" ]; do
echo -n "Insert floppy (type s to stop, enter to load): "
read foo
if [ "X$foo" = "X" ]; then
pax -rf /dev/rfd${which}a
fi
done
}
Load_Tar_Fd1()
{
echo "Loading sets from multi-volume tar floppies"
Set_Distrib_Dir
which=
while [ "$which" != "0" -a "$which" != "1" ]; do
echo -n "Read from which floppy drive ('0' or '1')? [0] "
read which
if [ "X$which" = "X" ]; then
which=0
fi
done
foo=
while [ "X$foo" = "X" ]; do
echo -n "Insert floppy (type s to stop, enter to load): "
read foo
if [ "X$foo" = "X" ]; then
pax -rf /dev/rfd${which}a
fi
done
}
Load_Sets()
{
res0=
while [ "$res0" != "q" -a "$res0" != "Q" ]; do
echo ""
echo -n "1. Set distrib directory (Currently $distribdir"
if [ ! -d $distribdir ]; then
echo " - non-existant)"
else
echo ")"
fi
echo "2. Load sets from msdos floppies"
echo "3. Load sets from tar floppies"
echo "4. Load sets from multi-volume tar floppies"
echo "Q. Return to previous menu"
echo ""
echo -n "Choice : "
read res0
case "$res0" in
1)
Get_Distrib_Dir
;;
2)
Load_Msdos_Fd
;;
3)
Load_Tar_Fd
;;
4)
Load_Tar_Fd1
;;
q|Q)
# echo "Returning to previous menu"
;;
esac
done
}
Mount_CDROM()
{
which=
while [ "$which" != "0" -a "$which" != "1" ]; do
echo -n "Mount which CDROM drive ('0' or '1')? [0] "
read which
if [ "X$which" = "X" ]; then
which=0
fi
done
if [ ! -d /cdrom ]; then
mkdir /cdrom
fi
if [ ! -d /cdrom ]; then
echo "No /cdrom directory, read only root filesystem ?"
exit 1
fi
mount -r -t cd9660 /dev/cd${which}a /cdrom
if [ ! $? = 0 ]; then
echo "Mount failed"
else
distribdir="/cdrom/distrib"
fi
}
Mount_DEV_CDROM()
{
echo -n "Mount which device as CDROM ? [sd0a] "
read which
if [ ! -d /cdrom ]; then
mkdir /cdrom
fi
if [ ! -d /cdrom ]; then
echo "No /cdrom directory, read only root filesystem ?"
exit 1
fi
mount -r -t cd9660 /dev/${which} /cdrom
if [ ! $? = 0 ]; then
echo "Mount failed"
else
distribdir="/cdrom/distrib"
fi
}
CDROM_Sets() {
res0=
while [ "$res0" != "q" -a "$res0" != "Q" ]; do
echo ""
echo -n "1. Set distrib directory (Currently $distribdir"
if [ ! -d $distribdir ]; then
echo " - non-existant)"
else
echo ")"
fi
echo -n "2. Mount CDROM "
if [ ! -b /dev/cd0a ]; then
echo "- Not available"
else
echo ""
fi
if [ -f /var/inst/developer ]; then
echo "D. Mount disc as CDROM"
fi
echo "Q. Return to previous menu"
echo ""
echo -n "Choice : "
read res0
case "$res0" in
1)
Get_Distrib_Dir
;;
2)
Mount_CDROM
;;
d|D)
Mount_DEV_CDROM
;;
q|Q)
;;
esac
done
}
Show_Sets()
{
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/\.[sS][eE][tT]//'`
echo "Loaded sets in $distribdir :"
for set in $sets; do
awk 'BEGIN {c=1} (match($1,"set:")!=0) {set=$2} (c==1) {(match($1,"desc:")!=0) { if (c==1) {printf "%-16s",set} \
else {printf "%-16s",""} printf "%s\n",substr($0,index($0,$2)); c+=1 }}' $set.set $set.SET 2>/dev/null
# cat "$set".set 2>/dev/null | grep 'desc:' | cut -f2-
# cat "$set".SET 2>/dev/null | grep 'desc:' | cut -f2-
done
}
Show_Installed_Sets()
{
INSTALLDIR=$dest_dir/var/inst/installed
cd $INSTALLDIR
if [ ! $? = 0 ]; then
return
fi
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/\.[sS][eE][tT]//'`
echo "Installed sets:"
for set in $sets; do
awk 'BEGIN {c=1} (match($1,"set:")!=0) {set=$2} (match($1,"desc:")!=0) { if (c==1) {printf "%-16s",set} \
else {printf "%-16s",""} printf "%s\n",substr($0,index($0,$2)); c+=1 }' $set.set $set.SET 2>/dev/null
# cat "$set".set 2>/dev/null | grep 'desc:' | cut -f2-
# cat "$set".SET 2>/dev/null | grep 'desc:' | cut -f2-
done
}
Validate_Sets()
{
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/\.[sS][eE][tT]//'`
list=""
echo "Loaded sets in $distribdir :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
echo -n "Enter set names or 'all' for all sets : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
if [ "$res2" = "all" ]; then
res2="$list"
fi
sets="$res2"
echo "Validating in $distribdir :"
for set in $sets; do
fail=""
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
p1=`cat $set.$setname 2>/dev/null | grep 'parts:' | cut -f2`
if [ ! "X$p1" = "X0" -a ! "X$p1" = "X" ]; then
# Set contains many parts
if [ -f "$set".00 ]; then
numext=1
p2=`ls "$set".[0-9][0-9] 2>/dev/null | wc | awk '{print $1}'`
else
numext=0
if [ $setname = "set" ]; then
p2=`ls "$set".[a-z][a-z] 2>/dev/null | wc | awk '{print $1}'`
else
p2=`ls "$set".[A-Z][A-Z] 2>/dev/null | wc | awk '{print $1}'`
fi
fi
printf "$set\t:"
# echo "$p1 , $p2"
if [ ! "$p1" = "$p2" ]; then
echo -n " Failed parts check (need $p1, got $p2)"
else
echo -n " Passed parts check"
fi
if [ $numext -eq 1 ]; then
forline="0 1 2 3 4 5 6 7 8 9"
else
if [ $setname = "set" ]; then
forline="a b c d e f g h i j k l m n o p q r s t u v w x y z"
else
forline="A B C D E F G H I J K L M N O P Q R S T U V W X Y Z"
fi
fi
loop=0
for a in $forline; do
if [ $loop -ge $p1 ]; then
break
fi
for b in $forline; do
if [ $loop -ge $p1 ]; then
break
fi
echo -n " [$a$b]"
file=`echo $a$b | tr '[A-Z]' '[a-z]'`
cksum=`cat $set.$setname | grep "cksum.$file:" | cut -f2`
cksum1=`cat "$set".$a$b 2>&1 | cksum | cut "-d " -f1`
#echo "#$cksum, $cksum1#"
if [ ! "$cksum" = "$cksum1" ]; then
echo -n " part $a$b failed checksum"
fail="yes"
fi
loop=$(($loop+1))
done
done
if [ "$fail" = "" ]; then
echo " Passed checksum"
else
echo ""
fi
fi
if [ -f $set.tar.gz ]; then
printf "$set\t: [tar.gz]"
cksum=`cat $set.$setname | grep "cksum.tar.gz:" | cut -f2`
cksum1=`cat $set.tar.gz 2>&1 | cksum | cut -d" " -f1`
if [ ! "$cksum" = "$cksum1" ]; then
echo " failed checksum"
else
echo " Passed checksum"
fi
fi
done
}
Verify_Sets()
{
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
list=""
echo "Loaded sets in $distribdir :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
echo -n "Enter set names or 'all' for all sets : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
if [ "$res2" = "all" ]; then
res2="$list"
fi
sets="$res2"
echo "Verifing sets in $distribdir :"
for set in $sets; do
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
p1=`cat $set.$setname 2>/dev/null | grep 'parts:' | cut -f2`
if [ ! "X$p1" = "X0" -a ! "X$p1" = "X" ]; then
printf "$set\t(parts):"
if [ -f $set.00 ]; then
cat "$set".[0-9][0-9] 2>/dev/null | $GUNZIP -t 2>/dev/null 1>/dev/null
else
if [ $setname = "set" ]; then
cat "$set".[a-z][a-z] 2>/dev/null | $GUNZIP -t 2>/dev/null 1>/dev/null
else
cat "$set".[A-Z][A-Z] 2>/dev/null | $GUNZIP -t 2>/dev/null 1>/dev/null
fi
fi
if [ ! $? = 0 ]; then
echo " Failed archive integrity"
else
echo " Passed"
fi
fi
if [ -f $set.tar.gz ]; then
printf "$set\t(tar.gz):"
$GUNZIP -t $set.tar.gz 2>/dev/null 1>/dev/null
if [ ! $? = 0 ]; then
echo " Failed archive integrity"
else
echo " Passed"
fi
fi
done
}
Verify_Checksums()
{
echo -n "Enter name of checksums file : "
read checkfile
if [ "X$checkfile" = "X" ]; then
return
fi
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
list=""
echo "Available sets in $distribdir :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
echo -n "Enter set names or 'all' for all sets : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
if [ "$res2" = "all" ]; then
res2="$list"
fi
sets="$res2"
TMPFILE1="/tmp/inst.cksum1"
TMPFILE2="/tmp/inst.cksum2"
echo "Comparing checksums for sets in $distribdir :"
for set in $sets; do
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
printf "$set\t:"
grep cksum $set.$setname >$TMPFILE1
egrep -i "`echo ^$set.$setname | sed -e 's/\+/\\\\+/g'`" $checkfile | cut '-d:' -f2- >$TMPFILE2
cmp -s $TMPFILE1 $TMPFILE2
if [ $? = 0 ]; then
echo "checksums ok"
else
echo "checksum error"
fi
done
rm -f $TMPFILE1
rm -f $TMPFILE2
}
Check_Sets() {
res0=
while [ "$res0" != "q" -a "$res0" != "Q" ]; do
echo ""
echo "1. Validate distribution sets (confirm checksums)"
echo "2. Verify distribution sets (integrity check)"
echo "3. Validate checksums (confirm set checksums)"
echo "Q. Return to previous menu"
echo ""
echo -n "Choice : "
read res0
case "$res0" in
1)
Validate_Sets
;;
2)
Verify_Sets
;;
3)
Verify_Checksums
;;
q|Q)
;;
esac
done
}
List_Sets()
{
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
list=""
echo "Loaded sets in $distribdir :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
echo -n "Enter set names or 'all' for all sets : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
if [ "$res2" = "all" ]; then
res2="$list"
fi
sets="$res2"
echo "Listing contents of sets in $distribdir :"
for set in $sets; do
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
echo "$set:"
if [ -f $set.tar.gz ]; then
pax -zvf $set.tar.gz
elif [ -f $set.00 ]; then
cat "$set".[0-9][0-9] | $GUNZIP | pax -v
else
if [ $setname = "set" ]; then
cat "$set".[a-z][a-z] | $GUNZIP | pax -v
else
cat "$set".[A-Z][A-Z] | $GUNZIP | pax -v
fi
fi
done
}
Install_Sets()
{
# Make sure all the directories exist for recording the installation
INSTALLDIR=$dest_dir/var/inst
if [ ! -d $dest_dir/var ]; then
echo "Creating $dest_dir/var"
mkdir $dest_dir/var
fi
if [ ! -d $INSTALLDIR ]; then
echo "Creating $INSTALLDIR"
mkdir $INSTALLDIR
fi
if [ ! -d $INSTALLDIR/installed ]; then
echo "Creating $INSTALLDIR/installed"
mkdir $INSTALLDIR/installed
fi
if [ ! -d $INSTALLDIR/sets ]; then
echo "Creating $INSTALLDIR/sets"
mkdir $INSTALLDIR/sets
fi
if [ ! -d $dest_dir/tmp ]; then
echo "Creating $dest_dir/tmp"
mkdir $dest_dir/tmp
chmod 1777 $dest_dir/tmp
fi
# Set the distribution directory and list all the available sets
Set_Distrib_Dir
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
list=""
echo "Loaded sets in $distribdir :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
# Prompt for the sets to install
echo -n "Enter set names or 'all' for all sets : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
# Check for any of the special sets
if [ "$res2" = "all" ]; then
res2="$list"
fi
if [ "$res2" = "req" ]; then
res2="base etc misc"
fi
if [ "$res2" = "std" ]; then
res2="base etc misc text local man kern config"
fi
# Hack to make sure the base set is the first installed
res2=`echo "$res2" | awk 'BEGIN {s="";found=0} {for (n=1;n<=NF;++n) \
{ if ($n=="base") {found=1} else {s=s $n " "}}} \
END {if (found==1) {printf "base "} print s}'`
res2=`echo "$res2" | awk 'BEGIN {s="";found=0} {for (n=1;n<=NF;++n) \
{ if ($n=="BASE") {found=1} else {s=s $n " "}}} \
END {if (found==1) {printf "BASE "} print s}'`
echo -n "Would you like to list the files as they're extracted? [n] "
read verbose
case $verbose in
y*|Y*)
tarverbose=v
;;
*)
tarverbose=
;;
esac
for set in $res2; do
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
# Test for conflicts
ok=""
for file in `ls $INSTALLDIR/installed/*.[sS][eE][tT] 2>/dev/null`; do
conflict="`grep conflict: $file | cut -d: -f2- 2>/dev/null`"
echo $conflict | egrep -i "(^|[[:space:]])$set([[:space:]]|$)" 2>/dev/null > /dev/null
if [ $? = 0 ]; then
echo "Set $set conflicts with installed set `basename $file`"
ok="no"
break
fi
done
if [ ! "$ok" = "" ]; then
continue
fi
conflicts="`grep conflict: $set.$setname | cut -d: -f2-`"
installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
for conflict in $conflicts ; do
echo $installed | egrep -i "(^|[[:space:]])$conflict.set([[:space:]]|$)" 2>/dev/null > /dev/null
if [ $? = 0 ]; then
echo "Set $set conflicts with installed set $conflict"
ok="no"
break;
fi
done
if [ ! "$ok" = "" ]; then
continue
fi
dependancies="`grep depend: $set.$setname | cut -d: -f2-`"
installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
for depend in $dependancies ; do
echo $installed | egrep -i "(^|[[:space:]])$depend\.set([[:space:]]|$)" 2> /dev/null >/dev/null
if [ ! $? = 0 ]; then
echo "Set $depend must be installed before $set"
ok="no"
break;
fi
done
if [ ! "$ok" = "" ]; then
continue
fi
if [ -f "$set".00 -o -f "$set".aa -o -f "$set".AA -o -f $set.tar.gz ]; then
upgrade="no"
if [ -x "$INSTALLDIR/scripts/$set" ]; then
echo "Running pre-upgrade script for $set"
(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set pre-upgrade)
upgrade="yes"
fi
filelist="$dest_dir/tmp/$set.files"
echo "Installing $set"
case $verbose in
y*|Y*)
if [ -f $set.tar.gz ]; then
cat "$set".tar.gz | $GUNZIP | (cd $dest_dir ; pax -rvpe | tee $filelist)
elif [ -f $set.00 ]; then
cat "$set".[0-9][0-9] | $GUNZIP | (cd $dest_dir ; pax -rvpe - | tee $filelist)
else
if [ $setname = "set" ]; then
cat "$set".[a-z][a-z] | $GUNZIP | (cd $dest_dir ; pax -rvpe | tee $filelist)
else
cat "$set".[A-Z][A-Z] | $GUNZIP | (cd $dest_dir ; pax -rvpe | tee $filelist)
fi
fi
;;
*)
if [ -f $set.tar.gz ]; then
cat "$set".tar.gz | $GUNZIP | (cd $dest_dir ; pax -rvpe > $filelist)
elif [ -f $set.00 ]; then
cat "$set".[0-9][0-9] | $GUNZIP | (cd $dest_dir ; pax -rvpe > $filelist)
else
if [ $setname = "set" ]; then
cat "$set".[a-z][a-z] | $GUNZIP | (cd $dest_dir ; pax -rvpe > $filelist)
else
cat "$set".[A-Z][A-Z] | $GUNZIP | (cd $dest_dir ; pax -rvpe > $filelist)
fi
fi
;;
esac
echo "Generating installation information"
cat $filelist | awk '{ print $0 }' > $INSTALLDIR/installed/$set.files
# cat $filelist | awk '{ print $3 $8 }' > $INSTALLDIR/installed/$set.files
rm $filelist
cp $set.$setname $INSTALLDIR/installed/
# Run any install script
if [ -x "$INSTALLDIR/scripts/$set" ]; then
if [ "$upgrade" = "yes" ]; then
echo "Running upgrade script for $set"
(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set upgrade)
else
echo "Running installation script for $set"
(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set install)
fi
fi
else
echo "Set $set not available for installation"
fi
sync
done
# Test for other set requirements
echo "Checking installed set requirements"
installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
for set in $installed; do
required="`grep req: $INSTALLDIR/installed/$set | cut -d: -f2- 2>/dev/null`"
for require in $required; do
echo $installed | egrep -i "(^|[[:space:]])$require.set([[:space:]]|$)" 2>/dev/null > /dev/null
if [ ! $? = 0 ]; then
echo "Set $set requires set $require"
# break
fi
done
done
}
Deinstall_Sets()
{
# Make sure all the directories exist for recording the installation
INSTALLDIR=$dest_dir/var/inst
# Set the distribution directory and list all the available sets
cd $INSTALLDIR/installed
sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
list=""
echo "Installed sets :"
for set in $sets; do
printf "$set\t"
list="$list $set"
done
echo ""
# Prompt for the sets to deinstall
echo -n "Enter set names : "
read res2
res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
echo -n "Would you like to list the files as they're removed? [n] "
read verbose
for set in $res2; do
setname="set"
if [ ! -f "$set"."$setname" ]; then
setname="SET"
set=`echo $set | tr [a-z] [A-Z]`
fi
if [ -f "$set".set ]; then
# Test for dependancies
ok=""
for file in `ls $INSTALLDIR/installed/*.[sS][eE][tT] 2>/dev/null`; do
depend="`grep depend: $file 2>/dev/null`"
echo $depend | egrep -i "(^|[[:space:]])$set([[:space:]]|$)" 2>/dev/null > /dev/null
if [ $? = 0 ]; then
echo "Installed set $file depends on set $set"
ok="no"
break
fi
done
if [ ! "$ok" = "" ]; then
continue
fi
echo "Deinstalling $set"
if [ -x "$INSTALLDIR/scripts/$set" ]; then
echo "Running deinstallation script for $set"
(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set deinstall)
fi
case $verbose in
y*|Y*)
for file in `cat $set.files`; do
echo $file
(cd $dest_dir ; rm $file) 2>/dev/null >/dev/null
done
;;
*)
cat "$set.files" | (cd $dest_dir ; xargs rm 2>/dev/null >/dev/null )
;;
esac
rm "$set.files"
rm "$set.set"
else
echo "Set $set not available for deinstallation"
fi
sync
done
# Test for other set requirements
echo "Checking installed set requirements"
installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
for set in $installed; do
required="`grep req: $INSTALLDIR/installed/$set | cut -d: -f2- 2>/dev/null`"
for require in $required; do
echo $installed | egrep -i "(^|[[:space:]])$require.set([[:space:]]|$)" 2>/dev/null > /dev/null
if [ ! $? = 0 ]; then
echo "Set $set requires set $require"
# break
fi
done
done
}
Select_Sets()
{
echo -n ""
}
Main_Menu()
{
res1=
while [ "$res1" != "q" -a "$res1" != "Q" ]; do
echo ""
echo "RiscBSD (NetBSD/arm32) Installer V$VERSION"
echo ""
echo -n "1. Set distrib directory (Currently $distribdir"
if [ ! -d $distribdir ]; then
echo " - non-existant)"
else
echo ")"
fi
echo "2. Load distribution sets onto harddisc"
echo "3. Load distribution sets from CDROM"
echo "4. Show distribution sets"
echo "5. Show installed sets"
echo "6. Check sets (verify/validate)"
echo "7. List contents of distribution sets in $distribdir"
echo "8. Install distribution sets from $distribdir"
echo "D. Deinstall installed sets"
echo "R. Set root directory for install (Currently $dest_dir)"
echo "Q. Quit"
echo ""
echo -n "Choice : "
read res1
case "$res1" in
1)
Get_Distrib_Dir
;;
2)
Load_Sets
;;
3)
CDROM_Sets
;;
4)
Show_Sets
;;
5)
Show_Installed_Sets
;;
6)
Check_Sets
;;
7)
List_Sets
;;
8)
Install_Sets
;;
d|D)
Deinstall_Sets
;;
r|R)
Get_Dest_Dir
;;
q|Q)
# echo "Quitting"
;;
esac
done
}
# we know that /etc/fstab is only generated on the hard drive
destdir=
dest_dir=/
if [ ! -f /etc/fstab ]; then
dest_dir=/mnt/
fi
if [ -f /etc/cdrom ]; then
dest_dir=/mnt/
fi
# counter for possible shared library confusion
TAR=/usr/bin/tar
GUNZIP=/usr/bin/gunzip
distribdir=$destdir/usr/distrib
mkdir $distribdir 2>/dev/null
chmod 1777 $distribdir 2>/dev/null
if [ $# -gt 0 ]; then
distribdir=$1
fi
if [ -x /usr/bin/whoami ]; then
IAM=`whoami`
if [ ! "$IAM" = "root" ]; then
echo "inst should be run as root"
exit
fi
fi
Main_Menu
exit