NetBSD/sys/arch/hp300/dev/grf_dv.c
thorpej 838edf78fd Snapshot of new config for NetBSD/hp300. This isn't quite finished yet.
We're about 75% there.  SCSI and HP-IB are not yet supported in a new
config kernel; some autoconfiguration hackery has to be done there, yet.
These changes are enough to network boot a diskless kernel.

New config glue is enabled with the "NEWCONFIG" kernel option.  If that
option is not present, an old config kernel will be built.  Any kernel
configured with config(8) will automatically pick up the NEWCONFIG
option from std.hp300.
1996-12-17 08:40:56 +00:00

741 lines
17 KiB
C

/* $NetBSD: grf_dv.c,v 1.9 1996/12/17 08:41:07 thorpej Exp $ */
/*
* Copyright (c) 1996 Jason R. Thorpe. All rights reserved.
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: grf_dv.c 1.12 93/08/13$
*
* @(#)grf_dv.c 8.4 (Berkeley) 1/12/94
*/
/*
* Graphics routines for the DaVinci, HP98730/98731 Graphics system.
*/
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
#include <dev/cons.h>
#include <hp300/dev/diovar.h>
#include <hp300/dev/diodevs.h>
#include <hp300/dev/intiovar.h>
#include <hp300/dev/grfioctl.h>
#include <hp300/dev/grfvar.h>
#include <hp300/dev/grfreg.h>
#include <hp300/dev/grf_dvreg.h>
#include <hp300/dev/itevar.h>
#include <hp300/dev/itereg.h>
#include "ite.h"
int dv_init __P((struct grf_data *, int, caddr_t));
int dv_mode __P((struct grf_data *, int, caddr_t));
void dv_reset __P((struct dvboxfb *));
#ifdef NEWCONFIG
int dvbox_intio_match __P((struct device *, struct cfdata *, void *));
void dvbox_intio_attach __P((struct device *, struct device *, void *));
int dvbox_dio_match __P((struct device *, struct cfdata *, void *));
void dvbox_dio_attach __P((struct device *, struct device *, void *));
struct cfattach dvbox_intio_ca = {
sizeof(struct grfdev_softc), dvbox_intio_match, dvbox_intio_attach
};
struct cfattach dvbox_dio_ca = {
sizeof(struct grfdev_softc), dvbox_dio_match, dvbox_dio_attach
};
struct cfdriver dvbox_cd = {
NULL, "dvbox", DV_DULL
};
#endif /* NEWCONFIG */
/* DaVinci grf switch */
struct grfsw dvbox_grfsw = {
GID_DAVINCI, GRFDAVINCI, "dvbox", dv_init, dv_mode
};
#if NITE > 0
void dvbox_init __P((struct ite_data *));
void dvbox_deinit __P((struct ite_data *));
void dvbox_putc __P((struct ite_data *, int, int, int, int));
void dvbox_cursor __P((struct ite_data *, int));
void dvbox_clear __P((struct ite_data *, int, int, int, int));
void dvbox_scroll __P((struct ite_data *, int, int, int, int));
void dvbox_windowmove __P((struct ite_data *, int, int, int, int,
int, int, int));
/* DaVinci ite switch */
struct itesw dvbox_itesw = {
dvbox_init, dvbox_deinit, dvbox_clear, dvbox_putc,
dvbox_cursor, dvbox_scroll, ite_readbyte, ite_writeglyph
};
#endif /* NITE > 0 */
#ifdef NEWCONFIG
int
dvbox_intio_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct intio_attach_args *ia = aux;
struct grfreg *grf;
grf = (struct grfreg *)IIOV(GRFIADDR);
if (badaddr((caddr_t)grf))
return (0);
if (grf->gr_id == DIO_DEVICE_ID_FRAMEBUFFER &&
grf->gr_id2 == DIO_DEVICE_SECID_DAVINCI) {
ia->ia_addr = (caddr_t)GRFIADDR;
return (1);
}
return (0);
}
void
dvbox_intio_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct grfdev_softc *sc = (struct grfdev_softc *)self;
caddr_t grf;
grf = (caddr_t)IIOV(GRFIADDR);
sc->sc_scode = -1; /* XXX internal i/o */
grfdev_attach(sc, dv_init, grf, &dvbox_grfsw);
}
int
dvbox_dio_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct dio_attach_args *da = aux;
if (da->da_id == DIO_DEVICE_ID_FRAMEBUFFER &&
da->da_secid == DIO_DEVICE_SECID_DAVINCI)
return (1);
return (0);
}
void
dvbox_dio_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct grfdev_softc *sc = (struct grfdev_softc *)self;
struct dio_attach_args *da = aux;
caddr_t grf;
sc->sc_scode = da->da_scode;
if (sc->sc_scode == conscode)
grf = conaddr;
else {
grf = iomap(dio_scodetopa(sc->sc_scode), da->da_size);
if (grf == 0) {
printf("%s: can't map framebuffer\n",
sc->sc_dev.dv_xname);
return;
}
}
grfdev_attach(sc, dv_init, grf, &dvbox_grfsw);
}
#endif /* NEWCONFIG */
/*
* Initialize hardware.
* Must point g_display at a grfinfo structure describing the hardware.
* Returns 0 if hardware not present, non-zero ow.
*/
int
dv_init(gp, scode, addr)
struct grf_data *gp;
int scode;
caddr_t addr;
{
register struct dvboxfb *dbp;
struct grfinfo *gi = &gp->g_display;
int fboff;
extern caddr_t iomap();
/*
* If the console has been initialized, and it was us, there's
* no need to repeat this.
*/
if (consinit_active || (scode != conscode)) {
dbp = (struct dvboxfb *) addr;
if (ISIIOVA(addr))
gi->gd_regaddr = (caddr_t) IIOP(addr);
else
gi->gd_regaddr = dio_scodetopa(scode);
gi->gd_regsize = 0x20000;
gi->gd_fbwidth = (dbp->fbwmsb << 8) | dbp->fbwlsb;
gi->gd_fbheight = (dbp->fbhmsb << 8) | dbp->fbhlsb;
gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight;
fboff = (dbp->fbomsb << 8) | dbp->fbolsb;
gi->gd_fbaddr = (caddr_t) (*((u_char *)addr + fboff) << 16);
if (gi->gd_regaddr >= (caddr_t)DIOIIBASE) {
/*
* For DIO II space the fbaddr just computed is
* the offset from the select code base (regaddr)
* of the framebuffer. Hence it is also implicitly
* the size of the register set.
*/
gi->gd_regsize = (int) gi->gd_fbaddr;
gi->gd_fbaddr += (int) gi->gd_regaddr;
gp->g_regkva = addr;
gp->g_fbkva = addr + gi->gd_regsize;
} else {
/*
* For DIO space we need to map the seperate
* framebuffer.
*/
gp->g_regkva = addr;
gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize);
}
gi->gd_dwidth = (dbp->dwmsb << 8) | dbp->dwlsb;
gi->gd_dheight = (dbp->dwmsb << 8) | dbp->dwlsb;
gi->gd_planes = 0; /* ?? */
gi->gd_colors = 256;
dv_reset(dbp);
}
return(1);
}
/*
* Magic code herein.
*/
void
dv_reset(dbp)
struct dvboxfb *dbp;
{
dbp->reset = 0x80;
DELAY(100);
dbp->interrupt = 0x04;
dbp->en_scan = 0x01;
dbp->fbwen = ~0;
dbp->opwen = ~0;
dbp->fold = 0x01;
dbp->drive = 0x01;
dbp->rep_rule = 0x33;
dbp->alt_rr = 0x33;
dbp->zrr = 0x33;
dbp->fbvenp = 0xFF;
dbp->dispen = 0x01;
dbp->fbvens = 0x0;
dbp->fv_trig = 0x01;
DELAY(100);
dbp->vdrive = 0x0;
dbp->zconfig = 0x0;
while (dbp->wbusy & 0x01)
DELAY(100);
dbp->cmapbank = 0;
dbp->red0 = 0;
dbp->red1 = 0;
dbp->green0 = 0;
dbp->green1 = 0;
dbp->blue0 = 0;
dbp->blue1 = 0;
dbp->panxh = 0;
dbp->panxl = 0;
dbp->panyh = 0;
dbp->panyl = 0;
dbp->zoom = 0;
dbp->cdwidth = 0x50;
dbp->chstart = 0x52;
dbp->cvwidth = 0x22;
dbp->pz_trig = 1;
}
/*
* Change the mode of the display.
* Right now all we can do is grfon/grfoff.
* Return a UNIX error number or 0 for success.
*/
int
dv_mode(gp, cmd, data)
struct grf_data *gp;
int cmd;
caddr_t data;
{
register struct dvboxfb *dbp;
int error = 0;
dbp = (struct dvboxfb *) gp->g_regkva;
switch (cmd) {
case GM_GRFON:
dbp->dispen = 0x01;
break;
case GM_GRFOFF:
break;
case GM_GRFOVON:
dbp->opwen = 0xF;
dbp->drive = 0x10;
break;
case GM_GRFOVOFF:
dbp->opwen = 0;
dbp->drive = 0x01;
break;
/*
* Remember UVA of mapping for GCDESCRIBE.
* XXX this should be per-process.
*/
case GM_MAP:
gp->g_data = data;
break;
case GM_UNMAP:
gp->g_data = 0;
break;
#ifdef COMPAT_HPUX
case GM_DESCRIBE:
{
struct grf_fbinfo *fi = (struct grf_fbinfo *)data;
struct grfinfo *gi = &gp->g_display;
int i;
/* feed it what HP-UX expects */
fi->id = gi->gd_id;
fi->mapsize = gi->gd_fbsize;
fi->dwidth = gi->gd_dwidth;
fi->dlength = gi->gd_dheight;
fi->width = gi->gd_fbwidth;
fi->length = gi->gd_fbheight;
fi->bpp = NBBY;
fi->xlen = (fi->width * fi->bpp) / NBBY;
fi->npl = gi->gd_planes;
fi->bppu = fi->npl;
fi->nplbytes = fi->xlen * ((fi->length * fi->bpp) / NBBY);
bcopy("HP98730", fi->name, 8);
fi->attr = 2; /* HW block mover */
/*
* If mapped, return the UVA where mapped.
*/
if (gp->g_data) {
fi->regbase = gp->g_data;
fi->fbbase = fi->regbase + gp->g_display.gd_regsize;
} else {
fi->fbbase = 0;
fi->regbase = 0;
}
for (i = 0; i < 6; i++)
fi->regions[i] = 0;
break;
}
#endif
default:
error = EINVAL;
break;
}
return(error);
}
#if NITE > 0
/*
* DaVinci ite routines
*/
#define REGBASE ((struct dvboxfb *)(ip->regbase))
#define WINDOWMOVER dvbox_windowmove
void
dvbox_init(ip)
register struct ite_data *ip;
{
int i;
/* XXX */
if (ip->regbase == 0) {
struct grf_data *gp = ip->grf;
ip->regbase = gp->g_regkva;
ip->fbbase = gp->g_fbkva;
ip->fbwidth = gp->g_display.gd_fbwidth;
ip->fbheight = gp->g_display.gd_fbheight;
ip->dwidth = gp->g_display.gd_dwidth;
ip->dheight = gp->g_display.gd_dheight;
/*
* XXX some displays (e.g. the davinci) appear
* to return a display height greater than the
* returned FB height. Guess we should go back
* to getting the display dimensions from the
* fontrom...
*/
if (ip->dwidth > ip->fbwidth)
ip->dwidth = ip->fbwidth;
if (ip->dheight > ip->fbheight)
ip->dheight = ip->fbheight;
}
dv_reset((struct dvboxfb *)ip->regbase);
/*
* Turn on frame buffer, turn on overlay planes, set replacement
* rule, enable top overlay plane writes for ite, disable all frame
* buffer planes, set byte per pixel, and display frame buffer 0.
* Lastly, turn on the box.
*/
REGBASE->interrupt = 0x04;
REGBASE->drive = 0x10;
REGBASE->rep_rule = RR_COPY << 4 | RR_COPY;
REGBASE->opwen = 0x01;
REGBASE->fbwen = 0x0;
REGBASE->fold = 0x01;
REGBASE->vdrive = 0x0;
REGBASE->dispen = 0x01;
/*
* Video enable top overlay plane.
*/
REGBASE->opvenp = 0x01;
REGBASE->opvens = 0x01;
/*
* Make sure that overlay planes override frame buffer planes.
*/
REGBASE->ovly0p = 0x0;
REGBASE->ovly0s = 0x0;
REGBASE->ovly1p = 0x0;
REGBASE->ovly1s = 0x0;
REGBASE->fv_trig = 0x1;
DELAY(100);
/*
* Setup the overlay colormaps. Need to set the 0,1 (black/white)
* color for both banks.
*/
for (i = 0; i <= 1; i++) {
REGBASE->cmapbank = i;
REGBASE->rgb[0].red = 0x00;
REGBASE->rgb[0].green = 0x00;
REGBASE->rgb[0].blue = 0x00;
REGBASE->rgb[1].red = 0xFF;
REGBASE->rgb[1].green = 0xFF;
REGBASE->rgb[1].blue = 0xFF;
}
REGBASE->cmapbank = 0;
db_waitbusy(ip->regbase);
ite_fontinfo(ip);
ite_fontinit(ip);
/*
* Clear the (visible) framebuffer.
*/
dvbox_windowmove(ip, 0, 0, 0, 0, ip->dheight, ip->dwidth, RR_CLEAR);
db_waitbusy(ip->regbase);
/*
* Stash the inverted cursor.
*/
dvbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '),
ip->cblanky, ip->cblankx, ip->ftheight,
ip->ftwidth, RR_COPYINVERTED);
}
void
dvbox_deinit(ip)
register struct ite_data *ip;
{
dvbox_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR);
db_waitbusy(ip->regbase);
ip->flags &= ~ITE_INITED;
}
void
dvbox_putc(ip, c, dy, dx, mode)
struct ite_data *ip;
int dy, dx, c, mode;
{
register int wrr = ((mode == ATTR_INV) ? RR_COPYINVERTED : RR_COPY);
dvbox_windowmove(ip, charY(ip, c), charX(ip, c),
dy * ip->ftheight, dx * ip->ftwidth,
ip->ftheight, ip->ftwidth, wrr);
}
void
dvbox_cursor(ip, flag)
struct ite_data *ip;
int flag;
{
if (flag == DRAW_CURSOR)
draw_cursor(ip)
else if (flag == MOVE_CURSOR) {
erase_cursor(ip)
draw_cursor(ip)
}
else
erase_cursor(ip)
}
void
dvbox_clear(ip, sy, sx, h, w)
struct ite_data *ip;
int sy, sx, h, w;
{
dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
sy * ip->ftheight, sx * ip->ftwidth,
h * ip->ftheight, w * ip->ftwidth,
RR_CLEAR);
}
void
dvbox_scroll(ip, sy, sx, count, dir)
struct ite_data *ip;
int sy, count, dir, sx;
{
register int dy;
register int dx = sx;
register int height = 1;
register int width = ip->cols;
if (dir == SCROLL_UP) {
dy = sy - count;
height = ip->rows - sy;
}
else if (dir == SCROLL_DOWN) {
dy = sy + count;
height = ip->rows - dy - 1;
}
else if (dir == SCROLL_RIGHT) {
dy = sy;
dx = sx + count;
width = ip->cols - dx;
}
else {
dy = sy;
dx = sx - count;
width = ip->cols - sx;
}
dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
dy * ip->ftheight, dx * ip->ftwidth,
height * ip->ftheight,
width * ip->ftwidth, RR_COPY);
}
void
dvbox_windowmove(ip, sy, sx, dy, dx, h, w, func)
struct ite_data *ip;
int sy, sx, dy, dx, h, w, func;
{
register struct dvboxfb *dp = REGBASE;
if (h == 0 || w == 0)
return;
db_waitbusy(ip->regbase);
dp->rep_rule = func << 4 | func;
dp->source_y = sy;
dp->source_x = sx;
dp->dest_y = dy;
dp->dest_x = dx;
dp->wheight = h;
dp->wwidth = w;
dp->wmove = 1;
}
/*
* DaVinci console support
*/
int
dvbox_console_scan(scode, va, arg)
int scode;
caddr_t va;
void *arg;
{
struct grfreg *grf = (struct grfreg *)va;
struct consdev *cp = arg;
u_char *dioiidev;
int force = 0, pri;
if ((grf->gr_id == GRFHWID) && (grf->gr_id2 == GID_DAVINCI)) {
pri = CN_NORMAL;
#ifdef CONSCODE
/*
* Raise our priority, if appropriate.
*/
if (scode == CONSCODE) {
pri = CN_REMOTE;
force = conforced = 1;
}
#endif
/* Only raise priority. */
if (pri > cp->cn_pri)
cp->cn_pri = pri;
/*
* If our priority is higher than the currently-remembered
* console, stash our priority.
*/
if (((cn_tab == NULL) || (cp->cn_pri > cn_tab->cn_pri))
|| force) {
cn_tab = cp;
if (scode >= 132) {
dioiidev = (u_char *)va;
return ((dioiidev[0x101] + 1) * 0x100000);
}
return (DIOCSIZE);
}
}
return (0);
}
void
dvboxcnprobe(cp)
struct consdev *cp;
{
int maj;
caddr_t va;
struct grfreg *grf;
int force = 0;
maj = ite_major();
/* initialize required fields */
cp->cn_dev = makedev(maj, 0); /* XXX */
cp->cn_pri = CN_DEAD;
/* Abort early if console is already forced. */
if (conforced)
return;
/* Look for "internal" framebuffer. */
va = (caddr_t)IIOV(GRFIADDR);
grf = (struct grfreg *)va;
if (!badaddr(va) &&
((grf->gr_id == GRFHWID) && (grf->gr_id2 == GID_DAVINCI))) {
cp->cn_pri = CN_INTERNAL;
#ifdef CONSCODE
/*
* Raise our priority and save some work, if appropriate.
*/
if (CONSCODE == -1) {
cp->cn_pri = CN_REMOTE;
force = conforced = 1;
}
#endif
/*
* If our priority is higher than the currently
* remembered console, stash our priority, and
* unmap whichever device might be currently mapped.
* Since we're internal, we set the saved size to 0
* so they don't attempt to unmap our fixed VA later.
*/
if (((cn_tab == NULL) || (cp->cn_pri > cn_tab->cn_pri))
|| force) {
cn_tab = cp;
if (convasize)
iounmap(conaddr, convasize);
conscode = -1;
conaddr = va;
convasize = 0;
}
}
console_scan(dvbox_console_scan, cp);
}
void
dvboxcninit(cp)
struct consdev *cp;
{
struct grf_data *gp = &grf_cn;
/*
* Initialize the framebuffer hardware.
*/
(void)dv_init(gp, conscode, conaddr);
/*
* Set up required grf data.
*/
gp->g_sw = &dvbox_grfsw;
gp->g_display.gd_id = gp->g_sw->gd_swid;
gp->g_flags = GF_ALIVE;
/*
* Initialize the terminal emulator.
*/
itecninit(gp, &dvbox_itesw);
}
#endif /* NITE > 0 */