291 lines
7.8 KiB
C
291 lines
7.8 KiB
C
/* $NetBSD: ispvar.h,v 1.7 1997/08/27 11:24:56 bouyer Exp $ */
|
|
|
|
/*
|
|
* Soft Definitions for for Qlogic ISP SCSI adapters.
|
|
*
|
|
* Copyright (c) 1997 by Matthew Jacob
|
|
* NASA/Ames Research Center
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _ISPVAR_H
|
|
#define _ISPVAR_H
|
|
|
|
#include <dev/ic/ispmbox.h>
|
|
|
|
/*
|
|
* Vector for MD code to provide specific services.
|
|
*/
|
|
struct ispsoftc;
|
|
struct ispmdvec {
|
|
u_int16_t (*dv_rd_reg) __P((struct ispsoftc *, int));
|
|
void (*dv_wr_reg) __P((struct ispsoftc *, int, u_int16_t));
|
|
int (*dv_mbxdma) __P((struct ispsoftc *));
|
|
int (*dv_dmaset) __P((struct ispsoftc *,
|
|
struct scsipi_xfer *, ispreq_t *, u_int8_t *, u_int8_t));
|
|
void (*dv_dmaclr)
|
|
__P((struct ispsoftc *, struct scsipi_xfer *, u_int32_t));
|
|
void (*dv_reset0) __P((struct ispsoftc *));
|
|
void (*dv_reset1) __P((struct ispsoftc *));
|
|
void (*dv_dregs) __P((struct ispsoftc *));
|
|
const u_int16_t *dv_ispfw; /* ptr to f/w */
|
|
u_int16_t dv_fwlen; /* length of f/w */
|
|
u_int16_t dv_codeorg; /* code ORG for f/w */
|
|
u_int16_t dv_fwrev; /* f/w revision */
|
|
/*
|
|
* Initial values for conf1 register
|
|
*/
|
|
u_int16_t dv_conf1;
|
|
u_int16_t dv_clock; /* clock frequency */
|
|
};
|
|
|
|
#define MAX_TARGETS 16
|
|
#define MAX_LUNS 8
|
|
#define MAX_FC_TARG 126
|
|
|
|
#define MAXISPREQUEST 256
|
|
#define RQUEST_QUEUE_LEN(isp) MAXISPREQUEST
|
|
#define RESULT_QUEUE_LEN(isp) (RQUEST_QUEUE_LEN(isp) >> 2)
|
|
#define QENTRY_LEN 64
|
|
|
|
#define ISP_QUEUE_ENTRY(q, idx) ((q) + ((idx) * QENTRY_LEN))
|
|
#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN)
|
|
|
|
/*
|
|
* SCSI (as opposed to FC-PH) Specific Host Adapter Parameters
|
|
*/
|
|
|
|
typedef struct {
|
|
u_int16_t isp_adapter_enabled : 1,
|
|
isp_req_ack_active_neg : 1,
|
|
isp_data_line_active_neg: 1,
|
|
isp_cmd_dma_burst_enable: 1,
|
|
isp_data_dma_burst_enabl: 1,
|
|
isp_fifo_threshold : 2,
|
|
isp_diffmode : 1,
|
|
isp_initiator_id : 4,
|
|
isp_async_data_setup : 4;
|
|
u_int16_t isp_selection_timeout;
|
|
u_int16_t isp_max_queue_depth;
|
|
u_int16_t isp_clock;
|
|
u_int8_t isp_tag_aging;
|
|
u_int8_t isp_bus_reset_delay;
|
|
u_int8_t isp_retry_count;
|
|
u_int8_t isp_retry_delay;
|
|
struct {
|
|
u_int8_t dev_flags; /* Device Flags - see below */
|
|
u_int8_t exc_throttle;
|
|
u_int8_t sync_period;
|
|
u_int8_t sync_offset : 4,
|
|
dev_enable : 1;
|
|
} isp_devparam[MAX_TARGETS];
|
|
} sdparam; /* scsi device parameters */
|
|
|
|
/*
|
|
* Device Flags
|
|
*/
|
|
#define DPARM_DISC 0x80
|
|
#define DPARM_PARITY 0x40
|
|
#define DPARM_WIDE 0x20
|
|
#define DPARM_SYNC 0x10
|
|
#define DPARM_TQING 0x08
|
|
#define DPARM_ARQ 0x04
|
|
#define DPARM_QFRZ 0x02
|
|
#define DPARM_RENEG 0x01
|
|
#define DPARM_DEFAULT (0xff & ~DPARM_QFRZ)
|
|
|
|
#define ISP_20M_SYNCPARMS 0x080c
|
|
#define ISP_10M_SYNCPARMS 0x0c19
|
|
#define ISP_08M_SYNCPARMS 0x0c25
|
|
#define ISP_05M_SYNCPARMS 0x0c32
|
|
#define ISP_04M_SYNCPARMS 0x0c41
|
|
|
|
/*
|
|
* Fibre Channel Specifics
|
|
*/
|
|
typedef struct {
|
|
u_int64_t isp_wwn; /* WWN of adapter */
|
|
u_int8_t isp_loopid; /* FCAL of this adapter inst */
|
|
u_int8_t isp_retry_count;
|
|
u_int8_t isp_retry_delay;
|
|
u_int8_t isp_fwstate; /* ISP F/W state */
|
|
|
|
/*
|
|
* Scratch DMA mapped in area to fetch Port Database stuff, etc.
|
|
*/
|
|
volatile caddr_t isp_scratch;
|
|
u_int32_t isp_scdma;
|
|
} fcparam;
|
|
|
|
#define ISP2100_SCRLEN 0x100
|
|
|
|
#define FW_CONFIG_WAIT 0x0000
|
|
#define FW_WAIT_AL_PA 0x0001
|
|
#define FW_WAIT_LOGIN 0x0002
|
|
#define FW_READY 0x0003
|
|
#define FW_LOSS_OF_SYNC 0x0004
|
|
#define FW_ERROR 0x0005
|
|
#define FW_REINIT 0x0006
|
|
#define FW_NON_PART 0x0007
|
|
|
|
/*
|
|
* Soft Structure per host adapter
|
|
*/
|
|
struct ispsoftc {
|
|
struct device isp_dev;
|
|
struct ispmdvec * isp_mdvec;
|
|
#define isp_name isp_dev.dv_xname
|
|
struct scsipi_link isp_link;
|
|
u_int8_t isp_state;
|
|
int8_t isp_dblev;
|
|
u_int16_t isp_fwrev;
|
|
|
|
/*
|
|
* Host Adapter Type and Parameters.
|
|
* Some parameters nominally stored in NVRAM on card.
|
|
*/
|
|
u_int8_t isp_type;
|
|
void * isp_param;
|
|
|
|
/*
|
|
* Result and Request Queues.
|
|
*/
|
|
volatile u_int8_t isp_reqidx; /* index of next request */
|
|
volatile u_int8_t isp_residx; /* index of next result */
|
|
volatile u_int8_t isp_sendmarker;
|
|
volatile u_int8_t isp_seqno;
|
|
|
|
/*
|
|
* Sheer laziness, but it gets us around the problem
|
|
* where we don't have a clean way of remembering
|
|
* which scsipi_xfer is bound to which ISP queue entry.
|
|
*
|
|
* There are other more clever ways to do this, but,
|
|
* jeez, so I blow a couple of KB per host adapter...
|
|
* and it *is* faster.
|
|
*/
|
|
volatile struct scsipi_xfer *isp_xflist[MAXISPREQUEST];
|
|
|
|
/*
|
|
* request/result queues
|
|
*/
|
|
volatile caddr_t isp_rquest;
|
|
volatile caddr_t isp_result;
|
|
u_int32_t isp_rquest_dma;
|
|
u_int32_t isp_result_dma;
|
|
};
|
|
|
|
/*
|
|
* Adapter Variants
|
|
*/
|
|
#define ISP_HA_SCSI 0xf
|
|
#define ISP_HA_SCSI_UNKNOWN 0x0
|
|
#define ISP_HA_SCSI_1020 0x1
|
|
#define ISP_HA_SCSI_1040A 0x2
|
|
#define ISP_HA_SCSI_1040B 0x3
|
|
#define ISP_HA_FC 0xf0
|
|
#define ISP_HA_FC_2100 0x10
|
|
|
|
/*
|
|
* ISP States
|
|
*/
|
|
#define ISP_NILSTATE 0
|
|
#define ISP_RESETSTATE 1
|
|
#define ISP_INITSTATE 2
|
|
#define ISP_RUNSTATE 3
|
|
|
|
|
|
|
|
|
|
/*
|
|
* Macros to read, write ISP registers through MD code
|
|
*/
|
|
|
|
#define ISP_READ(isp, reg) \
|
|
(*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
|
|
|
|
#define ISP_WRITE(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
|
|
|
|
#define ISP_MBOXDMASETUP(isp) \
|
|
(*(isp)->isp_mdvec->dv_mbxdma)((isp))
|
|
|
|
#define ISP_DMASETUP(isp, xs, req, iptrp, optr) \
|
|
(*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr))
|
|
|
|
#define ISP_DMAFREE(isp, xs, seqno) \
|
|
if ((isp)->isp_mdvec->dv_dmaclr) \
|
|
(*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (seqno))
|
|
|
|
#define ISP_RESET0(isp) \
|
|
if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
|
|
#define ISP_RESET1(isp) \
|
|
if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
|
|
#define ISP_DUMPREGS(isp) \
|
|
if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp))
|
|
|
|
#define ISP_SETBITS(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
|
|
|
|
#define ISP_CLRBITS(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
|
|
|
|
/*
|
|
* Function Prototypes
|
|
*/
|
|
/*
|
|
* Reset Hardware.
|
|
*
|
|
* Only looks at sc_dev.dv_xname, sc_iot and sc_ioh fields.
|
|
*/
|
|
void isp_reset __P((struct ispsoftc *));
|
|
|
|
/*
|
|
* Initialize Hardware to known state
|
|
*/
|
|
void isp_init __P((struct ispsoftc *));
|
|
|
|
/*
|
|
* Complete attachment of Hardware
|
|
*/
|
|
void isp_attach __P((struct ispsoftc *));
|
|
|
|
/*
|
|
* Free any associated resources prior to decommissioning.
|
|
*/
|
|
void isp_uninit __P((struct ispsoftc *));
|
|
|
|
/*
|
|
* Interrupt Service Routine
|
|
*/
|
|
int isp_intr __P((void *));
|
|
|
|
|
|
|
|
|
|
#endif /* _ISPVAR_H */
|