NetBSD/tools/Makefile

267 lines
6.4 KiB
Makefile

# $NetBSD: Makefile,v 1.194 2018/05/09 13:21:27 joerg Exp $
.include <bsd.own.mk>
.include <bsd.endian.mk>
# Make sure that the ordered build/install processing applies when using
# plain make.
.MAIN: build_install
# TOOLDIR must be valid, unless MKTOOLS=no
.if ${MKTOOLS:Uyes} != "no"
.if "${TOOLDIR}" == ""
.error "TOOLDIR is undefined or empty"
.elif "${TOOLDIR:tW:M/*}" == ""
.error "TOOLDIR is not an absolute path: ${TOOLDIR}"
#.elif !exists(TOOLDIR) # XXX .exists fails for directories
#.error "TOOLDIR does not exist: ${TOOLDIR}"
.endif
.endif # MKTOOLS != no
# TOOLS_BUILDRUMP == yes builds only the subset of the tools required
# for building rump kernels and the hypervisor. It is typically used
# when building rump kernels targeted for non-NetBSD systems (via
# buildrump.sh), and should not be set for a regular "make build".
TOOLS_BUILDRUMP?=no
.if ${TOOLCHAIN_MISSING} == "no"
. if defined(HAVE_GCC) && ${HAVE_GCC} > 0
TOOLCHAIN_BITS= gmake .WAIT
TOOLCHAIN_BITS+= gmp .WAIT
TOOLCHAIN_BITS+= mpfr .WAIT
TOOLCHAIN_BITS+= mpc .WAIT
. endif
.endif
.if ${TOOLCHAIN_MISSING} == "no"
TOOLCHAIN_BITS+= binutils .WAIT
.endif
.if defined(HAVE_GCC) && ${HAVE_GCC} > 0
. if ${TOOLCHAIN_MISSING} == "no"
TOOLCHAIN_BITS+= gcc
. if ${MKCROSSGDB:Uno} != "no" || make(obj)
TOOLCHAIN_BITS+= gdb
. endif
TOOLCHAIN_BITS+= .WAIT
. endif
.endif
.if defined(HAVE_PCC)
. if ${TOOLCHAIN_MISSING} == "no"
TOOLCHAIN_BITS+= pcc
. endif
.endif
.if ${TOOLCHAIN_MISSING} == "no" || defined(EXTERNAL_TOOLCHAIN)
TOOLCHAIN_BITS+= dbsym mdsetimage
.endif
DTRACE_BITS=
.if ${MKDTRACE} != "no" || ${MKCTF} != "no"
DTRACE_BITS+= .WAIT libelf
DTRACE_BITS+= .WAIT libdwarf
DTRACE_BITS+= .WAIT libctf
.endif
.if ${MKCTF} != "no"
DTRACE_BITS+= .WAIT ctfconvert ctfmerge
.endif
LINT_BITS=
.if ${MKLINT} != "no"
LINT_BITS= lint lint2
.endif
# All of host-mkdep, compat, and binstall are needed before anything
# else. Within this group, they must be built in a specific order, and
# all of them must be built before any of them is installed. They may
# be installed in any order. This can't be expressed using the .WAIT
# notation inside the SUBDIR list.
#
# XXX .ORDER does not work when multiple targets are passed on the
# make command line without "-j", so use dependencies in addition to .ORDER.
#
.ORDER: dependall-host-mkdep dependall-compat dependall-binstall
.if make(dependall-host-mkdep) && make(dependall-compat)
dependall-compat: dependall-host-mkdep
.endif
.if make(dependall-compat) && make(dependall-binstall)
dependall-binstall: dependall-compat
.endif
# Dependencies in SUBDIR below ordered to maximize parallel ability.
# See above for special treatment for host-mkdep, compat, and binstall.
#
SUBDIR= host-mkdep compat binstall \
.WAIT mktemp .WAIT sed .WAIT genassym
.if ${TOOLS_BUILDRUMP} == "no"
SUBDIR+= cap_mkdb crunchgen ctags gencat hexdump \
${LINT_BITS} \
makewhatis mtree nbperf .WAIT uudecode
.endif
SUBDIR+= cat rpcgen join lorder m4 mkdep tsort .WAIT yacc .WAIT awk .WAIT lex
.if ${TOOLS_BUILDRUMP} == "no"
SUBDIR += .WAIT texinfo \
.WAIT tic \
.WAIT pax \
.WAIT ${TOOLCHAIN_BITS} \
${DTRACE_BITS} \
asn1_compile cksum compile_et db \
file lint1 slc \
makefs sortinfo \
.WAIT menuc mkcsmapper mkesdb mklocale mknod msgc \
.WAIT disklabel gpt \
.WAIT paxctl \
.WAIT fdisk \
.WAIT installboot \
pwd_mkdb strfile sunlabel vgrind zic
.endif
SUBDIR+= stat .WAIT config
.if ${MKLLVM} != "no"
SUBDIR+= \
llvm .WAIT \
llvm-lib/libLLVMDemangle llvm-lib/libLLVMSupport llvm-lib/libLLVMTableGen .WAIT \
llvm-tblgen llvm-clang-tblgen
.endif
.if ${MKLLVM} != "no" && !defined(EXTERNAL_TOOLCHAIN)
SUBDIR+= \
.WAIT llvm-include .WAIT \
llvm-lib .WAIT \
llvm-clang
. if ${MKLLD} != "no"
SUBDIR+= llvm-lld
. endif
. if ${MKMCLINKER} != "no"
SUBDIR+= llvm-mcld
. endif
.endif
.if ${MKMAN} != "no" || ${MKDOC} != "no" || ${MKHTML} != "no"
. if ${MKGROFF} != "no"
SUBDIR+= groff
. endif
SUBDIR+= mandoc
.endif
.if ${TOOLS_BUILDRUMP} == "no"
.if ${MKMAINTAINERTOOLS:Uno} != "no"
SUBDIR+= autoconf .WAIT gettext
.endif
.if ${USE_PIGZGZIP} != "no"
SUBDIR+= pigz
.endif
.if ${MACHINE} == "hppa"
SUBDIR+= hppa-mkboot
.endif
.if ${MACHINE} == "ibmnws"
SUBDIR+= ibmnws-ncdcs
.endif
.if ${MACHINE} == "macppc"
SUBDIR+= macppc-fixcoff
.endif
.if (${MACHINE} == "prep" || ${MACHINE} == "rs6000" || ${MACHINE} == "bebox")
SUBDIR+= powerpc-mkbootimage
.endif
.if ${MACHINE_ARCH} == "m68k"
SUBDIR+= m68k-elf2aout
.endif
.if (${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
${MACHINE_ARCH} == "mips64el" || ${MACHINE_ARCH} == "mips64eb")
SUBDIR+= mips-elf2ecoff
.endif
.if (${MACHINE} == "sgimips")
SUBDIR+= sgivol
.endif
.if ${MACHINE} == "acorn32"
SUBDIR+= sparkcrc
.endif
.if (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64")
SUBDIR+= fgen
.endif
.if ${MACHINE} == "amiga"
SUBDIR+= amiga-elf2bb
SUBDIR+= amiga-txlt
.endif
.if ${MACHINE} == "hp300"
SUBDIR+= hp300-mkboot
.endif
.if ${MACHINE} == "evbarm" \
&& ${MACHINE_CPU} == "arm" \
&& ${TARGET_ENDIANNESS} == "1234"
SUBDIR+= elftosb
.endif
.if ${MACHINE} == "evbarm" || ${MACHINE} == "evbmips" || \
${MACHINE} == "evbppc" || ${MACHINE} == "sandpoint"
SUBDIR+= mkubootimage
SUBDIR+= libfdt .WAIT
SUBDIR+= dtc
.endif
.if ${MKX11} != "no"
SUBDIR+= makestrs
SUBDIR+= makekeys
.endif
SUBDIR+= cvslatest
.endif # TOOLS_BUILDRUMP != no
check_MKTOOLS: .PHONY .NOTMAIN
.if ${MKTOOLS:Uyes} == "no"
@echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and'
@echo '*** updating your host toolchain. This should be used only as a'
@echo '*** temporary workaround for toolchain problems, as it will result'
@echo '*** in version skew and build errors over time!'
.endif
.if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes" # {
SUBDIR= # empty
realall realdepend install: check_MKTOOLS
.endif # }
.include <bsd.subdir.mk>
.include <bsd.buildinstall.mk>
.include <bsd.obj.mk>
.if !defined(PREVIOUSTOOLDIR)
. if exists(PREVIOUSTOOLDIR)
PREVIOUSTOOLDIR!= cat PREVIOUSTOOLDIR
. else
PREVIOUSTOOLDIR=
. endif
.endif
CLEANFILES+= PREVIOUSTOOLDIR
realall realdepend: .MAKE
.if !empty(PREVIOUSTOOLDIR) && "${PREVIOUSTOOLDIR}" != "${TOOLDIR}"
@echo "*** WARNING: TOOLDIR has moved?"
@echo "*** PREVIOUSTOOLDIR '${PREVIOUSTOOLDIR}'"
@echo "*** != TOOLDIR '${TOOLDIR}'"
@echo "*** Cleaning mis-matched tools"
rm -f PREVIOUSTOOLDIR
(cd ${.CURDIR} && ${MAKE} PREVIOUSTOOLDIR=${TOOLDIR} cleandir)
.endif
echo ${TOOLDIR} >PREVIOUSTOOLDIR
cleandir:
rm -f ${CLEANFILES}