7fe7089a02
config(1)/config(5) can't handle module dependency correctly at this moment. (This is another proof that shared file definition (`file xxx.c a|b') is a bad idea.)
565 lines
18 KiB
Plaintext
565 lines
18 KiB
Plaintext
# $NetBSD: INSTALL,v 1.126 2015/08/21 01:52:07 uebayasi Exp $
|
|
#
|
|
# This file was automatically created.
|
|
# Changes will be lost when make is run in this directory.
|
|
#
|
|
# Created from: # NetBSD: GENERIC.in,v 1.125 2014/07/05 09:59:06 tsutsui Exp $
|
|
#
|
|
##
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
|
|
include "arch/amiga/conf/std.amiga"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.126 $"
|
|
|
|
makeoptions COPTS="-Os"
|
|
|
|
maxusers 8
|
|
options RTC_OFFSET=0
|
|
|
|
#
|
|
# mainboards to support (in addition to Amiga)
|
|
#
|
|
options DRACO
|
|
options BB060STUPIDROM # You need this, if you have a non-DraCo
|
|
# MC68060 with an OS ROM up to (at least)
|
|
# V40 (OS3.1) and want to boot with the
|
|
# bootblock.
|
|
# You do not need this if you have a DraCo,
|
|
# have no 68060 or NEVER use the bootblock
|
|
options P5PPC68KBOARD # Phase5 PPC/68K board support
|
|
#
|
|
# processors this kernel should support
|
|
#
|
|
options M68060 # support for 060
|
|
options M060SP # MC68060 software support (Required for 060)
|
|
options M68040 # support for 040
|
|
options FPSP # MC68040 floating point support
|
|
options M68030 # support for 030
|
|
options M68020 # support for 020/851
|
|
options FPU_EMULATE # FPU emulation
|
|
|
|
#
|
|
# Networking options
|
|
#
|
|
options INET # IP networking support (Required)
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options GATEWAY # Packet forwarding
|
|
#options DIRECTED_BROADCAST # Broadcast across subnets
|
|
|
|
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
options IPFILTER_LOOKUP # ippool(8) support
|
|
options IPFILTER_COMPAT # Compat for IP-Filter
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# Filesystems
|
|
file-system FFS # Berkeley fast file system
|
|
file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured filesystem (experimental)
|
|
|
|
|
|
file-system NFS # Network File System client side code
|
|
file-system ADOSFS # AmigaDOS file system
|
|
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
|
|
file-system MSDOSFS # MS-DOS filesystem
|
|
|
|
file-system KERNFS # kernel data-structure filesystem
|
|
|
|
|
|
# Filesystem options
|
|
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
|
|
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
#
|
|
# Compatibility options for various existing systems
|
|
#
|
|
|
|
|
|
options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x)
|
|
options COMPAT_AOUT_M68K # actually make some system calls work.
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
|
|
#
|
|
# Support for various kernel options
|
|
#
|
|
|
|
#options INSECURE # disable kernel security levels
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
options USERCONF # userconf(4) support
|
|
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
#
|
|
# Misc. debugging options
|
|
#
|
|
options DDB # Kernel debugger
|
|
pseudo-device ksyms
|
|
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
#options DIAGNOSTIC # Extra kernel sanity checks
|
|
#options DEBUG # Enable misc. kernel debugging code
|
|
#options SYSCALL_DEBUG # debug all syscalls.
|
|
#options SCSIDEBUG # Add SCSI debugging statements
|
|
#options PANICBUTTON # Forced crash via keypress (?)
|
|
|
|
#
|
|
# Amiga specific options
|
|
#
|
|
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
|
|
# first bank of RAM. (default: unlimited)
|
|
|
|
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
|
|
# before the 10 secondinterval ends, or that KBDRESET does work at all.
|
|
#options KBDRESET # sync on Ctrl-Amiga-Amiga
|
|
|
|
# These options improve performance with the built-in serial port
|
|
# on slower Amigas. Try the larger buffers first then lev6_defer.
|
|
#options SERIBUF_SIZE=4096
|
|
#options SEROBUF_SIZE=32
|
|
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
|
|
|
|
#options DEVRELOAD # implement /dev/reload
|
|
# # currently only works for a.out kernels
|
|
|
|
options RETINACONSOLE # enable code to allow retina to be console
|
|
options ULOWELLCONSOLE # enable code to allow a2410 to be console
|
|
options CL5426CONSOLE # Cirrus console
|
|
options CV64CONSOLE # CyberVision console
|
|
options TSENGCONSOLE # Tseng console
|
|
options CV3DCONSOLE # CyberVision 64/3D console
|
|
|
|
options GRF_ECS # Enhanced Chip Set
|
|
options GRF_NTSC # NTSC
|
|
options GRF_PAL # PAL
|
|
options GRF_A2024 # Support for the A2024
|
|
options GRF_AGA # AGA Chip Set
|
|
options GRF_AGA_VGA # AGA VGAONLY timing
|
|
options GRF_SUPER72 # AGA Super-72
|
|
#options KFONT_8X11 # 8x11 font
|
|
|
|
# select a font for the console according to the character set and keymap
|
|
# you want to use
|
|
options KFONT_CONS_ISO8859_1
|
|
#options KFONT_CONS_ISO8859_2
|
|
|
|
# This is how you would tell the kernel the A2410 oscillator frequencies:
|
|
# The used frequencies are the defaults, and do not need option setting
|
|
#options ULOWELL_OSC1=36000000
|
|
#options ULOWELL_OSC2=66667000
|
|
|
|
# This is how you specify the blitting speed, higher values may speed up blits
|
|
# a littel bit. If you raise this value too much some trash may appear.
|
|
# the commented version is the default.
|
|
#options RH_MEMCLK=61000000
|
|
# this option enables the 64 bit sprite which does not work
|
|
# for quite a few people. E.g. The cursor sprite will turn to a block
|
|
# when moved to the top of the screen in X.
|
|
#options RH_64BIT_SPRITE
|
|
# enables fast scroll code appears to now work on 040 systems.
|
|
#options RETINA_SPEED_HACK
|
|
# enables the Hardwarecursor which does not work on some systems.
|
|
#options RH_HARDWARECURSOR
|
|
|
|
# wscons aware interface to amiga custom chips.
|
|
# If you enable it enable also wskbd.
|
|
#
|
|
#amidisplaycc0 at mainbus0 # wscons interface to custom chips
|
|
#wsdisplay0 at amidisplaycc0 console ?
|
|
#options WSEMUL_VT100
|
|
#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
|
|
#options FONT_VT220L8x10
|
|
#options FONT_VT220ISO8x16
|
|
|
|
#z3rambd* at zbus0 # Zorro III RAM block devices
|
|
#altmem* at z3rambd?
|
|
|
|
p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus
|
|
|
|
grfcc0 at mainbus0 # custom chips
|
|
grfrt0 at zbus0 # retina II
|
|
grfrh0 at zbus0 # retina III
|
|
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
|
|
grful0 at zbus0 # A2410
|
|
grfcv0 at zbus0 # CyberVision 64
|
|
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
|
|
grfcv3d0 at zbus0 # CyberVision 64/3D
|
|
|
|
grf0 at grfcc0
|
|
grf1 at grfrt0
|
|
grf2 at grfrh0
|
|
grf3 at grfcl?
|
|
grf4 at grful0
|
|
grf5 at grfcv0
|
|
grf6 at grfet?
|
|
grf7 at grfcv3d0
|
|
ite0 at grf0 # terminal emulators for grfs
|
|
ite1 at grf1 # terminal emulators for grfs
|
|
ite2 at grf2 # terminal emulators for grfs
|
|
ite3 at grf3 # terminal emulators for grfs
|
|
ite4 at grf4 # terminal emulators for grfs
|
|
ite5 at grf5 # terminal emulators for grfs
|
|
ite6 at grf6 # terminal emulators for grfs
|
|
ite7 at grf7 # terminal emulators for grfs
|
|
|
|
#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64)
|
|
#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D)
|
|
|
|
msc0 at zbus0 # A2232 MSC multiport serial.
|
|
mfc0 at zbus0 # MultiFaceCard I/O board
|
|
mfcs0 at mfc0 unit 0 # MFC serial
|
|
mfcs1 at mfc0 unit 1 # MFC serial
|
|
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
|
|
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
|
|
#mfcs2 at mfc1 unit 0
|
|
#mfcs3 at mfc1 unit 1
|
|
#mfcp1 at mfc1 unit 0
|
|
|
|
hyper* at zbus? # zbus HyperCom3/3+/4/4+
|
|
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
|
|
com* at hyper? port ? # Hypercom3/4 serial ports
|
|
lpt* at hyper? port ? # Hypercom3+/4+ parallel port
|
|
|
|
#options IOBZCLOCK=22118400 # default, uncomment the next line
|
|
#options IOBZCLOCK=24000000 # if needed.
|
|
|
|
iobl* at zbus? # zbus IOBlix
|
|
com* at iobl? port ? # IOBlix serial ports
|
|
lpt* at iobl? port ? # IOBlix parallel ports
|
|
|
|
|
|
#
|
|
# Keyboard device. Optionally can attach a wskbd.
|
|
# wskbd works together with a wsdisplay so enable them both if you will.
|
|
# Don't enable wskbd if you use ite.
|
|
#
|
|
# XXX in std.amiga: kbd0 at mainbus0
|
|
#wskbd0 at kbd0 console ?
|
|
|
|
|
|
#
|
|
# Amiga Mainboard devices (sans graphics and keyboard)
|
|
#
|
|
|
|
ser0 at mainbus0 # Amiga onboard serial
|
|
par0 at mainbus0 # Amiga onboard parallel
|
|
ms* at mainbus0 # Amiga mice
|
|
fdc0 at mainbus0 # Amiga FDC
|
|
fd* at fdc0 unit ? # floppy disks on the later
|
|
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
|
|
a2kbbc0 at mainbus0 # A2000 battery backed clock
|
|
|
|
#wsmouse* at ms?
|
|
|
|
#
|
|
# DraCo Mainboard devices (sans keyboard)
|
|
#
|
|
|
|
drbbc0 at mainbus0 # DraCo battery backed clock
|
|
drsupio0 at mainbus0 # DraCo superio chip
|
|
com* at drsupio? port ? # DraCo serial
|
|
lpt0 at drsupio? port ? # DraCo parallel
|
|
|
|
#
|
|
# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
|
|
#
|
|
|
|
|
|
# Ethernet cards:
|
|
le* at zbus0 # A2065, Ameristar, Ariadne
|
|
ne* at zbus0 # AriadneII
|
|
ed* at zbus0 # Hydra, ASDG LanRover
|
|
es* at zbus0 # CEI A4066 EthernetPLUS
|
|
qn* at zbus0 # Quicknet
|
|
|
|
xsh* at zbus0 # X-Surf 100
|
|
ne* at xshbus? # NE2000 chip on X-Surf 100
|
|
|
|
xsurf* at zbus0 # X-Surf
|
|
ne* at xsurfbus? # NE2000 chip on X-Surf
|
|
gencp* at xsurfbus? # clockports on X-Surf
|
|
wdc* at xsurfbus? # IDE on X-Surf
|
|
|
|
clockport* at gencp?
|
|
|
|
# Arcnet
|
|
bah* at zbus0 # C=/Ameristar A2060 / 560
|
|
|
|
# Greater Valley Product Bus
|
|
gvpbus* at zbus0
|
|
|
|
# scsi stuff, all possible
|
|
gtsc0 at gvpbus? # GVP series II scsi
|
|
scsibus* at gtsc0
|
|
ahsc0 at mainbus0 # A3000 scsi
|
|
scsibus* at ahsc0
|
|
atzsc0 at zbus0 # A2091 scsi
|
|
scsibus* at atzsc0
|
|
wstsc0 at zbus0 # Wordsync II scsi
|
|
scsibus* at wstsc0
|
|
ivsc0 at zbus0 # IVS scsi
|
|
scsibus* at ivsc0
|
|
mlhsc0 at zbus0 # Hacker scsi
|
|
scsibus* at mlhsc0
|
|
otgsc0 at zbus0 # 12 gauge scsi
|
|
scsibus* at otgsc0
|
|
zssc0 at zbus0 # Zeus scsi
|
|
scsibus* at zssc0
|
|
mgnsc0 at zbus0 # Magnum scsi
|
|
scsibus* at mgnsc0
|
|
wesc0 at zbus0 # Warp Engine scsi
|
|
scsibus* at wesc0
|
|
bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi
|
|
scsibus* at bppcsc0
|
|
afsc0 at zbus0 # A4091 scsi
|
|
scsibus* at afsc0
|
|
aftsc0 at mainbus0 # A4000T scsi
|
|
scsibus* at aftsc0
|
|
flsc0 at zbus0 # FastlaneZ3 scsi
|
|
scsibus* at flsc0
|
|
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
|
|
scsibus* at bzsc0
|
|
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
|
|
scsibus* at bzivsc0
|
|
bztzsc0 at zbus0 # Blizzard 2060 scsi
|
|
scsibus* at bztzsc0
|
|
cbsc0 at zbus0 # CyberSCSI I
|
|
scsibus* at cbsc0
|
|
cbiisc0 at zbus0 # CyberSCSI II
|
|
scsibus* at cbiisc0
|
|
cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
|
|
scsibus* at cbiiisc0
|
|
empsc0 at zbus0 # Emplant scsi
|
|
scsibus* at empsc0
|
|
|
|
acafh0 at mainbus0 # Individual Computers ACA500
|
|
wdc* at acafhbus? # CF slots on ACA500
|
|
gencp* at acafhbus? # clockport on ACA500
|
|
|
|
wdc0 at mainbus0 # A4000 & A1200 IDE bus
|
|
wdc* at zbus0 # Buddha / Catweasel
|
|
#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV
|
|
|
|
atabus* at wdc? channel ? # ATA bus
|
|
#atabus* at efa? channel ? # ATA bus
|
|
atabus* at ata? channel ? # ATA bus
|
|
wd* at atabus? drive ? # + drives
|
|
atapibus* at atabus? # ATAPI bus
|
|
cd* at atapibus? drive ? # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? # ATAPI disk drives
|
|
|
|
pccard0 at mainbus0
|
|
pcmcia* at pccard0
|
|
com* at pcmcia? function ? # Modems and serial cards
|
|
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
|
|
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
|
|
wdc* at pcmcia? function ?
|
|
awi* at pcmcia? function ? # BayStack 650 (802.11FH)
|
|
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
|
|
mbe* at pcmcia? function ? # MB8696x based Ethernet
|
|
ne* at pcmcia? function ? # NE2000-compatible Ethernet
|
|
sm* at pcmcia? function ? # Megahertz Ethernet
|
|
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
|
|
com* at mhzc?
|
|
sm* at mhzc?
|
|
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
drsc0 at mainbus0 # DraCo scsi
|
|
scsibus* at drsc0
|
|
|
|
|
|
# each hard drive from low target to high
|
|
# will configure to the next available sd unit number
|
|
sd* at scsibus? target ? lun ? # scsi disks
|
|
st* at scsibus? target ? lun ? # scsi tapes
|
|
cd* at scsibus? target ? lun ? # scsi cds
|
|
ch* at scsibus? target ? lun ? # scsi autochangers
|
|
|
|
# PCI bus support
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP
|
|
options PCI_NETBSD_CONFIGURE # supported by mppb(4), p5pb(4), empb(4)
|
|
|
|
p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX)
|
|
p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs
|
|
#options P5PB_DEBUG # enable excessive debug for p5pb
|
|
#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3
|
|
pci* at p5pb0
|
|
|
|
mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge
|
|
pci* at mppb?
|
|
|
|
empb0 at zbus0 # ELBOX Mediator PCI 1200
|
|
em4k0 at zbus0 # ELBOX Mediator PCI 4000
|
|
emmem0 at zbus0 # ELBOX Mediator PCI memory space
|
|
empm0 at empb0 # ELBOX Mediator PCI Power Management
|
|
pci* at empb0
|
|
pci* at em4k0
|
|
|
|
#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge
|
|
|
|
#genfb* at pci? # generic fb, CVPPC/BVPPC only
|
|
#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX
|
|
#radeonfb* at pci? # untested
|
|
|
|
ne* at pci? # NE2000 Ethernet
|
|
satalink* at pci? dev ? function ? flags 0x0002 # SiI SATALink 3112
|
|
|
|
# Bluetooth Controller and Device support
|
|
# tested only with btuart on an A1200
|
|
|
|
# Bluetooth PCMCIA Controllers
|
|
bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A
|
|
btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139
|
|
|
|
# Bluetooth Device Hub
|
|
bthub* at bcsp?
|
|
bthub* at bt3c?
|
|
bthub* at btbc?
|
|
bthub* at btuart?
|
|
|
|
# Bluetooth HID support
|
|
bthidev* at bthub?
|
|
|
|
# Bluetooth Mouse
|
|
#btms* at bthidev? reportid ?
|
|
#wsmouse* at btms? mux 0
|
|
|
|
# Bluetooth Keyboard
|
|
#btkbd* at bthidev? reportid ?
|
|
#wskbd* at btkbd? console ? mux 1
|
|
|
|
# Bluetooth Apple Magic Mouse
|
|
#btmagic* at bthub?
|
|
#wsmouse* at btmagic? mux 0
|
|
|
|
# Bluetooth Audio support
|
|
#btsco* at bthub?
|
|
|
|
# USB
|
|
slhci* at zbus? # Thylacine
|
|
usb* at slhci?
|
|
|
|
uhub* at usb?
|
|
uhub* at uhub? port ?
|
|
|
|
uhidev* at uhub? port ? configuration ? interface ?
|
|
uhid* at uhidev? reportid ?
|
|
|
|
|
|
pseudo-device loop # loopback network interface
|
|
pseudo-device sl # SLIP network interfaces
|
|
pseudo-device ppp # PPP network interfaces
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device tun # network tunnel line discipline
|
|
pseudo-device tap # virtual Ethernet
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
pseudo-device bpfilter # Berkeley packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
pseudo-device ipfilter # IP Filter package
|
|
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
pseudo-device agr # IEEE 802.3ad link aggregation
|
|
#pseudo-device pf # PF packet filter
|
|
#pseudo-device pflog # PF log if
|
|
#pseudo-device fss # file system snapshot device
|
|
#pseudo-device putter # for puffs and pud
|
|
|
|
pseudo-device view 4 # views (needed for grfcc)
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
#pseudo-device wsfont # wsfont(4) dynamic font loading support
|
|
#pseudo-device wsmux # mouse & keyboard multiplexor
|
|
|
|
pseudo-device vnd # vnode pseudo-disks
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
pseudo-device ccd # concatenated disk devices
|
|
#pseudo-device cgd # cryptographic disk devices
|
|
pseudo-device raid # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
|
|
pseudo-device bcsp # BlueCore Serial Protocol
|
|
pseudo-device btuart # Bluetooth HCI UART (H4)
|
|
|
|
# Veriexec
|
|
#
|
|
# a pseudo device needed for veriexec
|
|
#pseudo-device veriexec
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|
|
|
|
config netbsd root on ? type ?
|