117 lines
4.8 KiB
C
117 lines
4.8 KiB
C
/* $NetBSD: rf3000reg.h,v 1.5 2006/03/08 08:26:50 dyoung Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2005 David Young. All rights reserved.
|
|
*
|
|
* This code was written by David Young.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY David Young ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David
|
|
* Young BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
|
|
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_IC_RF3000REG_H_
|
|
#define _DEV_IC_RF3000REG_H_
|
|
|
|
/*
|
|
* Serial bus format for RF Microdevices RF3000 spread-spectrum
|
|
* baseband modem.
|
|
*/
|
|
#define RF3000_TWI_DATA_MASK 0xff
|
|
#define RF3000_TWI_ADDR_MASK 0x7f
|
|
#define RF3000_TWI_AI 0x80 /* auto-increment */
|
|
|
|
/*
|
|
* Registers for RFMD RF3000.
|
|
*/
|
|
#define RF3000_CTL 0x01 /* modem control */
|
|
#define RF3000_CTL_MODE_MASK __BITS(7, 4)
|
|
#define RF3000_CTL_MODE_1MBPS 0
|
|
#define RF3000_CTL_MODE_RSVD0 1
|
|
#define RF3000_CTL_MODE_2MBPS 2
|
|
#define RF3000_CTL_MODE_2MBPS_SHORT 3
|
|
#define RF3000_CTL_MODE_5MBPS 4
|
|
#define RF3000_CTL_MODE_5MBPS_SHORT 5
|
|
#define RF3000_CTL_MODE_11MBPS 6
|
|
#define RF3000_CTL_MODE_11MBPS_SHORT 7
|
|
#define RF3000_CTL_MODE_BPSK 8
|
|
#define RF3000_CTL_MODE_QPSK 9
|
|
#define RF3000_CTL_MODE_RSVD1 10
|
|
#define RF3000_CTL_MODE_RSVD2 11
|
|
#define RF3000_RXSTAT RF3000_CTL /* RX status */
|
|
#define RF3000_RXSTAT_SHORTPRE __BIT(3)/* 1: short preamble */
|
|
#define RF3000_RXSTAT_ACQ __BIT(2)/* 1: acquired */
|
|
#define RF3000_RXSTAT_SFD __BIT(1)/* 1: SFD detected */
|
|
#define RF3000_RXSTAT_CRC __BIT(0)/* 1: CRC invalid */
|
|
#define RF3000_CCACTL 0x02 /* CCA control */
|
|
/* CCA mode */
|
|
#define RF3000_CCACTL_MODE_MASK __BITS(7, 6)
|
|
#define RF3000_CCACTL_MODE_RSSIT 0 /* RSSI threshold */
|
|
#define RF3000_CCACTL_MODE_ACQ 1 /* acquisition */
|
|
#define RF3000_CCACTL_MODE_BOTH 2 /* threshold or acq. */
|
|
/* RSSI threshold for CCA */
|
|
#define RF3000_CCACTL_RSSIT_MASK __BITS(5, 0)
|
|
#define RF3000_DIVCTL 0x03 /* diversity control */
|
|
#define RF3000_DIVCTL_ENABLE __BIT(7)/* enable diversity */
|
|
#define RF3000_DIVCTL_ANTSEL __BIT(6)/* if ENABLE = 0, set
|
|
* ANT SEL
|
|
*/
|
|
#define RF3000_RSSI RF3000_DIVCTL /* RSSI value */
|
|
#define RF3000_RSSI_MASK __BITS(5, 0)
|
|
#define RF3000_GAINCTL 0x11 /* TX variable gain control */
|
|
#define RF3000_GAINCTL_TXVGC_MASK __BITS(7, 2)
|
|
#define RF3000_GAINCTL_SCRAMBLER __BIT(1)
|
|
#define RF3000_LOGAINCAL 0x14 /* low gain calibration */
|
|
#define RF3000_LOGAINCAL_CAL_MASK __BITS(5, 0)
|
|
#define RF3000_HIGAINCAL 0x15 /* high gain calibration */
|
|
#define RF3000_HIGAINCAL_CAL_MASK __BITS(5, 0)
|
|
#define RF3000_HIGAINCAL_DSSSPAD __BIT(6)/* 6dB gain pad for DSSS
|
|
* modes (meaning?)
|
|
*/
|
|
#define RF3000_OPTIONS1 0x1C /* Options Register 1 */
|
|
/* Saturation threshold is 4 + offset, where -3 <= offset <= 3.
|
|
* SAT_THRESH is the absolute value, SAT_THRESH_SIGN is the sign.
|
|
*/
|
|
#define RF3000_OPTIONS1_SAT_THRESH_SIGN __BIT(7)
|
|
#define RF3000_OPTIONS1_SAT_THRESH __BITS(6,5)
|
|
#define RF3000_OPTIONS1_ALTAGC __BIT(4)/* 1: retrigger AGC
|
|
* algorithm on ADC
|
|
* saturation
|
|
*/
|
|
#define RF3000_OPTIONS1_ALTBUS __BIT(3)/* 1: enable alternate
|
|
* Tx/Rx data bus
|
|
* interface.
|
|
*/
|
|
#define RF3000_OPTIONS1_RESERVED0_MASK __BITS(2,0)/* 0 */
|
|
|
|
#define RF3000_OPTIONS2 0x1D /* Options Register 2 */
|
|
/* 1: delay next AGC 2us instead of 1us after a 1->0 LNAGS-pin transition. */
|
|
#define RF3000_OPTIONS2_LNAGS_DELAY __BIT(7)
|
|
#define RF3000_OPTIONS2_RESERVED0_MASK __BITS(6,3) /* 0 */
|
|
/* Threshold for AGC re-trigger. 0: high count, 1: low count. */
|
|
#define RF3000_OPTIONS2_RTG_THRESH __BIT(2)
|
|
#define RF3000_OPTIONS2_RESERVED1_MASK __BITS(1,0) /* 0 */
|
|
|
|
#endif /* _DEV_IC_RF3000REG_H_ */
|