30 lines
1.2 KiB
C
30 lines
1.2 KiB
C
/* $NetBSD: pckbdreg.h,v 1.3 2013/03/06 03:26:17 christos Exp $ */
|
|
|
|
/*
|
|
* Keyboard definitions
|
|
*/
|
|
|
|
/* keyboard commands */
|
|
#define KBC_RESET 0xFF /* reset the keyboard */
|
|
#define KBC_RESEND 0xFE /* request the keyboard resend the last byte */
|
|
#define KBC_SETDEFAULT 0xF6 /* resets keyboard to its power-on defaults */
|
|
#define KBC_DISABLE 0xF5 /* as per KBC_SETDEFAULT, but also disable key scanning */
|
|
#define KBC_ENABLE 0xF4 /* enable key scanning */
|
|
#define KBC_TYPEMATIC 0xF3 /* set typematic rate and delay */
|
|
#define KBC_SETTABLE 0xF0 /* set scancode translation table */
|
|
#define KBC_MODEIND 0xED /* set mode indicators (i.e. LEDs) */
|
|
#define KBC_ECHO 0xEE /* request an echo from the keyboard */
|
|
|
|
/* keyboard responses */
|
|
#define KBR_EXTENDED0 0xE0 /* extended key sequence */
|
|
#define KBR_EXTENDED1 0xE1 /* extended key sequence */
|
|
#define KBR_RESEND 0xFE /* needs resend of command */
|
|
#define KBR_BAT_DONE 0xAA
|
|
#define KBR_ACK 0xFA /* received a valid command */
|
|
#define KBR_BAT_FAIL 0xFC
|
|
#define KBR_OVERRUN 0x00 /* flooded */
|
|
#define KBR_FAILURE 0xFD /* diagnostic failure */
|
|
#define KBR_BREAK 0xF0 /* break code prefix - sent on key release */
|
|
#define KBR_RSTDONE 0xAA /* reset complete */
|
|
#define KBR_ECHO 0xEE /* echo response */
|