1580 lines
58 KiB
C
1580 lines
58 KiB
C
/* $NetBSD: tulipreg.h,v 1.39 2019/05/28 08:59:34 msaitoh Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_IC_TULIPREG_H_
|
|
#define _DEV_IC_TULIPREG_H_
|
|
|
|
/*
|
|
* Register description for the Digital Semiconductor ``Tulip'' (21x4x)
|
|
* Ethernet controller family, and a variety of clone chips, including:
|
|
*
|
|
* - Macronix 98713, 98713A, 98715, 98715A, 98725 (PMAC):
|
|
*
|
|
* These chips are fairly straight-forward Tulip clones.
|
|
* The 98713 is a very close 21140A clone. It has GPR
|
|
* and MII media, and a GPIO facility, and uses the ISV
|
|
* SROM format (or, at least, should, because of the GPIO
|
|
* facility). The 98713A has MII, no GPIO facility, and
|
|
* an internal NWay block. The 98715, 98715A, and 98725
|
|
* have only GPR media and the NWay block. The 98715,
|
|
* 98715A, and 98725 support power management.
|
|
*
|
|
* The 98715AEC adds 802.3x flow Frame based Flow Control to the
|
|
* 98715A.
|
|
*
|
|
* - Lite-On 82C115 (PNIC II):
|
|
*
|
|
* A clone of the Macronix MX98725, with the following differences:
|
|
*
|
|
* - Wake-On-LAN support
|
|
* - 128-bit multicast hash table rather than the
|
|
* standard 512-bit hash table
|
|
* - 802.3x flow control
|
|
*
|
|
* - Lite-On 82C168, 82C169 (PNIC):
|
|
*
|
|
* Pretty close, with only a few minor differences:
|
|
*
|
|
* - EEPROM is accessed completely differently.
|
|
* - MII is accessed completely differently.
|
|
* - No SIO facility (due to the above two differences).
|
|
* - GPIO interface is different than the 21140's.
|
|
* - Boards that lack PHYs use the internal NWay block
|
|
* and transceiver.
|
|
*
|
|
* - Winbond 89C840F
|
|
*
|
|
* Less similar, but still roughly compatible (enough so
|
|
* that the driver can be adapted, at least):
|
|
*
|
|
* - Registers lack the pad word between them.
|
|
* - Instead of a setup frame, there are two station
|
|
* address registers and two multicast hash table
|
|
* registers (64-bit multicast hash table).
|
|
* - Only supported media interface is MII-over-SIO.
|
|
* - Different OPMODE register bits for various things
|
|
* (mostly media related).
|
|
*
|
|
* - ADMtek AL981
|
|
*
|
|
* Another pretty-close clone:
|
|
*
|
|
* - Wake-On-LAN support
|
|
* - Instead of a setup frame, there are two station
|
|
* address registers and two multicast hash table
|
|
* registers (64-bit multicast hash table).
|
|
* - 802.3x flow control
|
|
* - Only supported media interface is built-in PHY
|
|
* which is accessed through a set of special registers.
|
|
* - Not all registers have the pad word between them,
|
|
* but luckily, there are all AL981-specific registers,
|
|
* so this is easy to deal with.
|
|
*
|
|
* - ADMtek AN983 and AN985
|
|
*
|
|
* Similar to the ADMtek AL981, but with a few differences.
|
|
*
|
|
* - Xircom X3201-3
|
|
*
|
|
* CardBus 21143 clone, with a few differences:
|
|
*
|
|
* - No MicroWire SROM; Ethernet address must come
|
|
* from CIS.
|
|
* - Transmit buffers must also be 32-bit aligned.
|
|
* - The BUSMODE_SWR bit is not self-clearing.
|
|
* - Must include FS|LS in setup packet descriptor.
|
|
* - SIA is not 21143-like, and all media attachments
|
|
* are MII-on-SIO.
|
|
*
|
|
* - Davicom DM9102 and DM9102A
|
|
*
|
|
* Pretty similar to the 21140A, with a few differences:
|
|
*
|
|
* - Wake-On-LAN support
|
|
* - DM9102 has built-in 10/100 PHY on MII interface.
|
|
* - DM9102A has built-in 10/100 PHY on MII interface,
|
|
* as well as a HomePNA 1 PHY on an alternate MII
|
|
* interface (selected by clearing OPMODE_PS).
|
|
* - The chip has a bug in the transmit DMA logic,
|
|
* requiring that the packet be comprised of only
|
|
* one DMA segment.
|
|
* - The bus interface is buggy, and the BUSMODE register
|
|
* must be initialized to 0.
|
|
* - There seems to be an interrupt logic bug, requiring
|
|
* that interrupts be disabled on the chip during the
|
|
* interrupt handler.
|
|
*
|
|
* - ASIX AX88140
|
|
*
|
|
* 21143 clone with a few differences:
|
|
*
|
|
* - Specific broadcast bit in the OPMODE register.
|
|
* - Transmit buffer must be 32-bit aligned.
|
|
* - The BUSMODE_SWR bit is not self-clearing.
|
|
* - External 10BaseT PHY or 10/100 MII.
|
|
*
|
|
* Some of the clone chips have different registers, and some have
|
|
* different bits in the same registers. These will be denoted by
|
|
* PMAC, PNICII, PNIC, DM, WINB, ADM and AX in the register/bit names.
|
|
*/
|
|
|
|
/*
|
|
* Tulip buffer descriptor. Must be 4-byte aligned.
|
|
*
|
|
* Note for receive descriptors, the byte count fields must
|
|
* be a multiple of 4.
|
|
*/
|
|
struct tulip_desc {
|
|
volatile uint32_t td_status; /* Status */
|
|
volatile uint32_t td_ctl; /* Control and Byte Counts */
|
|
volatile uint32_t td_bufaddr1; /* Buffer Address 1 */
|
|
volatile uint32_t td_bufaddr2; /* Buffer Address 2 */
|
|
} __packed __aligned(4);
|
|
|
|
/*
|
|
* Descriptor Status bits common to transmit and receive.
|
|
*/
|
|
#define TDSTAT_OWN 0x80000000 /* Tulip owns descriptor */
|
|
#define TDSTAT_ES 0x00008000 /* Error Summary */
|
|
|
|
/*
|
|
* Descriptor Status bits for Receive Descriptor.
|
|
*/
|
|
#define TDSTAT_Rx_FF 0x40000000 /* Filtering Fail */
|
|
#define TDSTAT_WINB_Rx_RCMP 0x40000000 /* Receive Complete */
|
|
#define TDSTAT_Rx_FL 0x3fff0000 /* Frame Length including CRC */
|
|
#define TDSTAT_Rx_DE 0x00004000 /* Descriptor Error */
|
|
#define TDSTAT_Rx_DT 0x00003000 /* Data Type */
|
|
#define TDSTAT_Rx_RF 0x00000800 /* Runt Frame */
|
|
#define TDSTAT_Rx_MF 0x00000400 /* Multicast Frame */
|
|
#define TDSTAT_Rx_FS 0x00000200 /* First Descriptor */
|
|
#define TDSTAT_Rx_LS 0x00000100 /* Last Descriptor */
|
|
#define TDSTAT_Rx_TL 0x00000080 /* Frame Too Long */
|
|
#define TDSTAT_Rx_CS 0x00000040 /* Collision Seen */
|
|
#define TDSTAT_Rx_RT 0x00000020 /* Frame Type */
|
|
#define TDSTAT_Rx_RW 0x00000010 /* Receive Watchdog */
|
|
#define TDSTAT_Rx_RE 0x00000008 /* Report on MII Error */
|
|
#define TDSTAT_Rx_DB 0x00000004 /* Dribbling Bit */
|
|
#define TDSTAT_Rx_CE 0x00000002 /* CRC Error */
|
|
#define TDSTAT_Rx_ZER 0x00000001 /* Zero (always 0) */
|
|
|
|
#define TDSTAT_Rx_LENGTH(x) (((x) & TDSTAT_Rx_FL) >> 16)
|
|
|
|
#define TDSTAT_Rx_DT_SR 0x00000000 /* Serial Received Frame */
|
|
#define TDSTAT_Rx_DT_IL 0x00001000 /* Internal Loopback Frame */
|
|
#define TDSTAT_Rx_DT_EL 0x00002000 /* External Loopback Frame */
|
|
#define TDSTAT_Rx_DT_r 0x00003000 /* Reserved */
|
|
|
|
/*
|
|
* Descriptor Status bits for Transmit Descriptor.
|
|
*/
|
|
#define TDSTAT_WINB_Tx_TE 0x00008000 /* Transmit Error */
|
|
#define TDSTAT_Tx_TO 0x00004000 /* Transmit Jabber Timeout */
|
|
#define TDSTAT_Tx_LO 0x00000800 /* Loss of Carrier */
|
|
#define TDSTAT_Tx_NC 0x00000400 /* No Carrier */
|
|
#define TDSTAT_Tx_LC 0x00000200 /* Late Collision */
|
|
#define TDSTAT_Tx_EC 0x00000100 /* Excessive Collisions */
|
|
#define TDSTAT_Tx_HF 0x00000080 /* Heartbeat Fail */
|
|
#define TDSTAT_Tx_CC 0x00000078 /* Collision Count */
|
|
#define TDSTAT_Tx_LF 0x00000004 /* Link Fail */
|
|
#define TDSTAT_Tx_UF 0x00000002 /* Underflow Error */
|
|
#define TDSTAT_Tx_DE 0x00000001 /* Deferred */
|
|
|
|
#define TDSTAT_Tx_COLLISIONS(x) (((x) & TDSTAT_Tx_CC) >> 3)
|
|
|
|
/*
|
|
* Descriptor Control bits common to transmit and receive.
|
|
*/
|
|
#define TDCTL_SIZE1 0x000007ff /* Size of buffer 1 */
|
|
#define TDCTL_SIZE1_SHIFT 0
|
|
|
|
#define TDCTL_SIZE2 0x003ff800 /* Size of buffer 2 */
|
|
#define TDCTL_SIZE2_SHIFT 11
|
|
|
|
#define TDCTL_ER 0x02000000 /* End of Ring */
|
|
#define TDCTL_CH 0x01000000 /* Second Address Chained */
|
|
|
|
/*
|
|
* Descriptor Control bits for Transmit Descriptor.
|
|
*/
|
|
#define TDCTL_Tx_IC 0x80000000 /* Interrupt on Completion */
|
|
#define TDCTL_Tx_LS 0x40000000 /* Last Segment */
|
|
#define TDCTL_Tx_FS 0x20000000 /* First Segment */
|
|
#define TDCTL_Tx_FT1 0x10000000 /* Filtering Type 1 */
|
|
#define TDCTL_Tx_SET 0x08000000 /* Setup Packet */
|
|
#define TDCTL_Tx_AC 0x04000000 /* Add CRC Disable */
|
|
#define TDCTL_Tx_DPD 0x00800000 /* Disabled Padding */
|
|
#define TDCTL_Tx_FT0 0x00400000 /* Filtering Type 0 */
|
|
|
|
/*
|
|
* The Tulip filter is programmed by "transmitting" a Setup Packet
|
|
* (indicated by TDCTL_Tx_SET). The filtering type is indicated
|
|
* as follows:
|
|
*
|
|
* FT1 FT0 Description
|
|
* --- --- -----------
|
|
* 0 0 Perfect Filtering: The Tulip interprets the
|
|
* descriptor buffer as a table of 16 MAC addresses
|
|
* that the Tulip should receive.
|
|
*
|
|
* 0 1 Hash Filtering: The Tulip interprets the
|
|
* descriptor buffer as a 512-bit hash table
|
|
* plus one perfect address. If the incoming
|
|
* address is Multicast, the hash table filters
|
|
* the address, else the address is filtered by
|
|
* the perfect address.
|
|
*
|
|
* 1 0 Inverse Filtering: Like Perfect Filtering, except
|
|
* the table is addresses that the Tulip does NOT
|
|
* receive.
|
|
*
|
|
* 1 1 Hash-only Filtering: Like Hash Filtering, but
|
|
* physical addresses are matched by the hash table
|
|
* as well, and not by matching a single perfect
|
|
* address.
|
|
*
|
|
* A Setup Packet must always be 192 bytes long. The Tulip can store
|
|
* 16 MAC addresses. If not all 16 are specified in Perfect Filtering
|
|
* or Inverse Filtering mode, then unused entries should duplicate
|
|
* one of the valid entries.
|
|
*/
|
|
#define TDCTL_Tx_FT_PERFECT 0
|
|
#define TDCTL_Tx_FT_HASH TDCTL_Tx_FT0
|
|
#define TDCTL_Tx_FT_INVERSE TDCTL_Tx_FT1
|
|
#define TDCTL_Tx_FT_HASHONLY (TDCTL_Tx_FT1|TDCTL_Tx_FT0)
|
|
|
|
#define TULIP_SETUP_PACKET_LEN 192
|
|
#define TULIP_MAXADDRS 16
|
|
#define TULIP_MCHASHSIZE 512
|
|
#define TULIP_PNICII_HASHSIZE 128
|
|
|
|
/*
|
|
* Maximum size of a Tulip Ethernet Address ROM or SROM.
|
|
*/
|
|
#define TULIP_ROM_SIZE(bits) (2 << (bits))
|
|
#define TULIP_MAX_ROM_SIZE 512
|
|
|
|
/*
|
|
* Format of the standard Tulip SROM information:
|
|
*
|
|
* Byte offset Size Usage
|
|
* 0 18 reserved
|
|
* 18 1 SROM Format Version
|
|
* 19 1 Chip Count
|
|
* 20 6 IEEE Network Address
|
|
* 26 1 Chip 0 Device Number
|
|
* 27 2 Chip 0 Info Leaf Offset
|
|
* 29 1 Chip 1 Device Number
|
|
* 30 2 Chip 1 Info Leaf Offset
|
|
* 32 1 Chip 2 Device Number
|
|
* 33 2 Chip 2 Info Leaf Offset
|
|
* ... 1 Chip n Device Number
|
|
* ... 2 Chip n Info Leaf Offset
|
|
* ... ... ...
|
|
* Chip Info Leaf Information
|
|
* ...
|
|
* ...
|
|
* ...
|
|
* 126 2 CRC32 checksum
|
|
*/
|
|
#define TULIP_ROM_SROM_FORMAT_VERION 18 /* B */
|
|
#define TULIP_ROM_CHIP_COUNT 19 /* B */
|
|
#define TULIP_ROM_IEEE_NETWORK_ADDRESS 20
|
|
#define TULIP_ROM_CHIPn_DEVICE_NUMBER(n) (26 + ((n) * 3))/* B */
|
|
#define TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(n) (27 + ((n) * 3))/* W */
|
|
#define TULIP_ROM_CRC32_CHECKSUM 126 /* W */
|
|
#define TULIP_ROM_CRC32_CHECKSUM1 94 /* W */
|
|
|
|
#define TULIP_ROM_IL_SELECT_CONN_TYPE 0 /* W */
|
|
#define TULIP_ROM_IL_MEDIA_COUNT 2 /* B */
|
|
#define TULIP_ROM_IL_MEDIAn_BLOCK_BASE 3
|
|
|
|
#define SELECT_CONN_TYPE_TP 0x0000
|
|
#define SELECT_CONN_TYPE_BNC 0x0001
|
|
#define SELECT_CONN_TYPE_AUI 0x0002
|
|
#define SELECT_CONN_TYPE_100TX 0x0003
|
|
#define SELECT_CONN_TYPE_100T4 0x0006
|
|
#define SELECT_CONN_TYPE_100FX 0x0007
|
|
#define SELECT_CONN_TYPE MII_10T 0x0009
|
|
#define SELECT_CONN_TYPE_MII_100TX 0x000d
|
|
#define SELECT_CONN_TYPE_MII_100T4 0x000f
|
|
#define SELECT_CONN_TYPE_MII_100FX 0x0010
|
|
#define SELECT_CONN_TYPE_TP_AUTONEG 0x0100
|
|
#define SELECT_CONN_TYPE_TP_FDX 0x0204
|
|
#define SELECT_CONN_TYPE_MII_10T_FDX 0x020a
|
|
#define SELECT_CONN_TYPE_100TX_FDX 0x020e
|
|
#define SELECT_CONN_TYPE_MII_100TX_FDX 0x0211
|
|
#define SELECT_CONN_TYPE_TP_NOLINKPASS 0x0400
|
|
#define SELECT_CONN_TYPE_ASENSE 0x0800
|
|
#define SELECT_CONN_TYPE_ASENSE_POWERUP 0x8800
|
|
#define SELECT_CONN_TYPE_ASENSE_AUTONEG 0x0900
|
|
|
|
#define TULIP_ROM_MB_MEDIA_CODE 0x3f
|
|
#define TULIP_ROM_MB_MEDIA_TP 0x00
|
|
#define TULIP_ROM_MB_MEDIA_BNC 0x01
|
|
#define TULIP_ROM_MB_MEDIA_AUI 0x02
|
|
#define TULIP_ROM_MB_MEDIA_100TX 0x03
|
|
#define TULIP_ROM_MB_MEDIA_TP_FDX 0x04
|
|
#define TULIP_ROM_MB_MEDIA_100TX_FDX 0x05
|
|
#define TULIP_ROM_MB_MEDIA_100T4 0x06
|
|
#define TULIP_ROM_MB_MEDIA_100FX 0x07
|
|
#define TULIP_ROM_MB_MEDIA_100FX_FDX 0x08
|
|
|
|
#define TULIP_ROM_MB_EXT 0x40
|
|
|
|
#define TULIP_ROM_MB_CSR13 1 /* W */
|
|
#define TULIP_ROM_MB_CSR14 3 /* W */
|
|
#define TULIP_ROM_MB_CSR15 5 /* W */
|
|
|
|
#define TULIP_ROM_MB_SIZE(mc) (((mc) & TULIP_ROM_MB_EXT) ? 7 : 1)
|
|
|
|
#define TULIP_ROM_MB_NOINDICATOR 0x8000
|
|
#define TULIP_ROM_MB_DEFAULT 0x4000
|
|
#define TULIP_ROM_MB_POLARITY 0x0080
|
|
#define TULIP_ROM_MB_OPMODE(x) (((x) & 0x71) << 18)
|
|
#define TULIP_ROM_MB_BITPOS(x) (1 << (((x) & 0x0e) >> 1))
|
|
|
|
#define TULIP_ROM_MB_21140_GPR 0 /* 21140[A] GPR block */
|
|
#define TULIP_ROM_MB_21140_MII 1 /* 21140[A] MII block */
|
|
#define TULIP_ROM_MB_21142_SIA 2 /* 2114[23] SIA block */
|
|
#define TULIP_ROM_MB_21142_MII 3 /* 2114[23] MII block */
|
|
#define TULIP_ROM_MB_21143_SYM 4 /* 21143 SYM block */
|
|
#define TULIP_ROM_MB_21143_RESET 5 /* 21143 reset block */
|
|
|
|
#define TULIP_ROM_GETW(data, off) ((uint32_t)(data)[(off)] | \
|
|
(uint32_t)((data)[(off) + 1]) << 8)
|
|
|
|
/*
|
|
* Tulip control registers.
|
|
*/
|
|
|
|
#define TULIP_CSR0 0x00
|
|
#define TULIP_CSR1 0x08
|
|
#define TULIP_CSR2 0x10
|
|
#define TULIP_CSR3 0x18
|
|
#define TULIP_CSR4 0x20
|
|
#define TULIP_CSR5 0x28
|
|
#define TULIP_CSR6 0x30
|
|
#define TULIP_CSR7 0x38
|
|
#define TULIP_CSR8 0x40
|
|
#define TULIP_CSR9 0x48
|
|
#define TULIP_CSR10 0x50
|
|
#define TULIP_CSR11 0x58
|
|
#define TULIP_CSR12 0x60
|
|
#define TULIP_CSR13 0x68
|
|
#define TULIP_CSR14 0x70
|
|
#define TULIP_CSR15 0x78
|
|
#define TULIP_CSR16 0x80
|
|
#define TULIP_CSR17 0x88
|
|
#define TULIP_CSR18 0x90
|
|
#define TULIP_CSR19 0x98
|
|
#define TULIP_CSR20 0xa0
|
|
#define TULIP_CSR21 0xa8
|
|
#define TULIP_CSR22 0xb0
|
|
#define TULIP_CSR23 0xb8
|
|
#define TULIP_CSR24 0xc0
|
|
#define TULIP_CSR25 0xc8
|
|
#define TULIP_CSR26 0xd0
|
|
#define TULIP_CSR27 0xd8
|
|
#define TULIP_CSR28 0xe0
|
|
#define TULIP_CSR29 0xe8
|
|
#define TULIP_CSR30 0xf0
|
|
#define TULIP_CSR31 0xf8
|
|
|
|
#define TULIP_CSR_INDEX(csr) ((csr) >> 3)
|
|
|
|
/* CSR0 - Bus Mode */
|
|
#define CSR_BUSMODE TULIP_CSR0
|
|
#define BUSMODE_SWR 0x00000001 /* software reset */
|
|
#define BUSMODE_BAR 0x00000002 /* bus arbitration */
|
|
#define BUSMODE_DSL 0x0000007c /* descriptor skip length */
|
|
#define BUSMODE_BLE 0x00000080 /* big endian */
|
|
/* programmable burst length */
|
|
#define BUSMODE_PBL_DEFAULT 0x00000000 /* default value */
|
|
#define BUSMODE_PBL_1LW 0x00000100 /* 1 longword */
|
|
#define BUSMODE_PBL_2LW 0x00000200 /* 2 longwords */
|
|
#define BUSMODE_PBL_4LW 0x00000400 /* 4 longwords */
|
|
#define BUSMODE_PBL_8LW 0x00000800 /* 8 longwords */
|
|
#define BUSMODE_PBL_16LW 0x00001000 /* 16 longwords */
|
|
#define BUSMODE_PBL_32LW 0x00002000 /* 32 longwords */
|
|
/* cache alignment */
|
|
#define BUSMODE_CAL_NONE 0x00000000 /* no alignment */
|
|
#define BUSMODE_CAL_8LW 0x00004000 /* 8 longwords */
|
|
#define BUSMODE_CAL_16LW 0x00008000 /* 16 longwords */
|
|
#define BUSMODE_CAL_32LW 0x0000c000 /* 32 longwords */
|
|
#define BUSMODE_DAS 0x00010000 /* diagnostic address space */
|
|
/* must be zero on most */
|
|
/* transmit auto-poll */
|
|
/*
|
|
* Transmit auto-polling not supported on:
|
|
* Winbond 89C040F
|
|
* Xircom X3201-3
|
|
* Davicom DM9102 (buggy BUSMODE register)
|
|
* ASIX AX88140
|
|
*/
|
|
#define BUSMODE_TAP_NONE 0x00000000 /* no auto-polling */
|
|
#define BUSMODE_TAP_200us 0x00020000 /* 200 uS */
|
|
#define BUSMODE_TAP_800us 0x00040000 /* 400 uS */
|
|
#define BUSMODE_TAP_1_6ms 0x00060000 /* 1.6 mS */
|
|
#define BUSMODE_TAP_12_8us 0x00080000 /* 12.8 uS (21041+) */
|
|
#define BUSMODE_TAP_25_6us 0x000a0000 /* 25.6 uS (21041+) */
|
|
#define BUSMODE_TAP_51_2us 0x000c0000 /* 51.2 uS (21041+) */
|
|
#define BUSMODE_TAP_102_4us 0x000e0000 /* 102.4 uS (21041+) */
|
|
#define BUSMODE_DBO 0x00100000 /* desc-only b/e (21041+) */
|
|
#define BUSMODE_RME 0x00200000 /* rd/mult enab (21140+) */
|
|
#define BUSMODE_WINB_WAIT 0x00200000 /* wait state insertion */
|
|
#define BUSMODE_RLE 0x00800000 /* rd/line enab (21140+) */
|
|
#define BUSMODE_WLE 0x01000000 /* wt/line enab (21140+) */
|
|
#define BUSMODE_PNIC_MBO 0x04000000 /* magic `must be one' bit */
|
|
/* on Lite-On PNIC */
|
|
|
|
|
|
/* CSR1 - Transmit Poll Demand */
|
|
#define CSR_TXPOLL TULIP_CSR1
|
|
#define TXPOLL_TPD 0x00000001 /* transmit poll demand */
|
|
|
|
|
|
/* CSR2 - Receive Poll Demand */
|
|
#define CSR_RXPOLL TULIP_CSR2
|
|
#define RXPOLL_RPD 0x00000001 /* receive poll demand */
|
|
|
|
|
|
/* CSR3 - Receive List Base Address */
|
|
#define CSR_RXLIST TULIP_CSR3
|
|
|
|
/* CSR4 - Transmit List Base Address */
|
|
#define CSR_TXLIST TULIP_CSR4
|
|
|
|
/* CSR5 - Status */
|
|
#define CSR_STATUS TULIP_CSR5
|
|
#define STATUS_TI 0x00000001 /* transmit interrupt */
|
|
#define STATUS_TPS 0x00000002 /* transmit process stopped */
|
|
#define STATUS_TU 0x00000004 /* transmit buffer unavail */
|
|
#define STATUS_TJT 0x00000008 /* transmit jabber timeout */
|
|
#define STATUS_WINB_REI 0x00000008 /* receive early interrupt */
|
|
#define STATUS_LNPANC 0x00000010 /* link pass (21041) */
|
|
#define STATUS_WINB_RERR 0x00000010 /* receive error */
|
|
#define STATUS_UNF 0x00000020 /* transmit underflow */
|
|
#define STATUS_RI 0x00000040 /* receive interrupt */
|
|
#define STATUS_RU 0x00000080 /* receive buffer unavail */
|
|
#define STATUS_RPS 0x00000100 /* receive process stopped */
|
|
#define STATUS_RWT 0x00000200 /* receive watchdog timeout */
|
|
#define STATUS_AT 0x00000400 /* SIA AUI/TP pin changed
|
|
(21040) */
|
|
#define STATUS_ETI 0x00000400 /* early transmit interrupt
|
|
(21142/PMAC/Winbond) */
|
|
#define STATUS_FD 0x00000800 /* full duplex short frame
|
|
received (21040) */
|
|
#define STATUS_TM 0x00000800 /* timer expired (21041) */
|
|
#define STATUS_LNF 0x00001000 /* link fail (21040) */
|
|
#define STATUS_SE 0x00002000 /* system error */
|
|
#define STATUS_ER 0x00004000 /* early receive (21041) */
|
|
#define STATUS_AIS 0x00008000 /* abnormal interrupt summary */
|
|
#define STATUS_NIS 0x00010000 /* normal interrupt summary */
|
|
#define STATUS_RS 0x000e0000 /* receive process state */
|
|
#define STATUS_RS_STOPPED 0x00000000 /* Stopped */
|
|
#define STATUS_RS_FETCH 0x00020000 /* Running - fetch receive
|
|
descriptor */
|
|
#define STATUS_RS_CHECK 0x00040000 /* Running - check for end
|
|
of receive */
|
|
#define STATUS_RS_WAIT 0x00060000 /* Running - wait for packet */
|
|
#define STATUS_RS_SUSPENDED 0x00080000 /* Suspended */
|
|
#define STATUS_RS_CLOSE 0x000a0000 /* Running - close receive
|
|
descriptor */
|
|
#define STATUS_RS_FLUSH 0x000c0000 /* Running - flush current
|
|
frame from FIFO */
|
|
#define STATUS_RS_QUEUE 0x000e0000 /* Running - queue current
|
|
frame from FIFO into
|
|
buffer */
|
|
#define STATUS_DM_RS_STOPPED 0x00000000 /* Stopped */
|
|
#define STATUS_DM_RS_FETCH 0x00020000 /* Running - fetch receive
|
|
descriptor */
|
|
#define STATUS_DM_RS_WAIT 0x00040000 /* Running - wait for packet */
|
|
#define STATUS_DM_RS_QUEUE 0x00060000 /* Running - queue current
|
|
frame from FIFO into
|
|
buffer */
|
|
#define STATUS_DM_RS_CLOSE_OWN 0x00080000 /* Running - close receive
|
|
descriptor, clear own */
|
|
#define STATUS_DM_RS_CLOSE_ST 0x000a0000 /* Running - close receive
|
|
descriptor, write status */
|
|
#define STATUS_DM_RS_SUSPENDED 0x000c0000 /* Suspended */
|
|
#define STATUS_DM_RS_FLUSH 0x000e0000 /* Running - flush current
|
|
frame from FIFO */
|
|
#define STATUS_TS 0x00700000 /* transmit process state */
|
|
#define STATUS_TS_STOPPED 0x00000000 /* Stopped */
|
|
#define STATUS_TS_FETCH 0x00100000 /* Running - fetch transmit
|
|
descriptor */
|
|
#define STATUS_TS_WAIT 0x00200000 /* Running - wait for end
|
|
of transmission */
|
|
#define STATUS_TS_READING 0x00300000 /* Running - read buffer from
|
|
memory and queue into
|
|
FIFO */
|
|
#define STATUS_TS_RESERVED 0x00400000 /* RESERVED */
|
|
#define STATUS_TS_SETUP 0x00500000 /* Running - Setup packet */
|
|
#define STATUS_TS_SUSPENDED 0x00600000 /* Suspended */
|
|
#define STATUS_TS_CLOSE 0x00700000 /* Running - close transmit
|
|
descriptor */
|
|
#define STATUS_DM_TS_STOPPED 0x00000000 /* Stopped */
|
|
#define STATUS_DM_TS_FETCH 0x00100000 /* Running - fetch transmit
|
|
descriptor */
|
|
#define STATUS_DM_TS_SETUP 0x00200000 /* Running - Setup packet */
|
|
#define STATUS_DM_TS_READING 0x00300000 /* Running - read buffer from
|
|
memory and queue into
|
|
FIFO */
|
|
#define STATUS_DM_TS_CLOSE_OWN 0x00400000 /* Running - close transmit
|
|
descriptor, clear own */
|
|
#define STATUS_DM_TS_WAIT 0x00500000 /* Running - wait for end
|
|
of transmission */
|
|
#define STATUS_DM_TS_CLOSE_ST 0x00600000 /* Running - close transmit
|
|
descriptor, write status */
|
|
#define STATUS_DM_TS_SUSPENDED 0x00700000 /* Suspended */
|
|
#define STATUS_EB 0x03800000 /* error bits */
|
|
#define STATUS_EB_PARITY 0x00000000 /* parity errror */
|
|
#define STATUS_EB_MABT 0x00800000 /* master abort */
|
|
#define STATUS_EB_TABT 0x01000000 /* target abort */
|
|
#define STATUS_GPPI 0x04000000 /* GPIO interrupt (21142) */
|
|
#define STATUS_PNIC_TXABORT 0x04000000 /* transmit aborted */
|
|
#define STATUS_LC 0x08000000 /* 100baseTX link change
|
|
(21142/PMAC) */
|
|
#define STATUS_PMAC_WKUPI 0x10000000 /* wake up event */
|
|
#define STATUS_X3201_PMEIS 0x10000000 /* power management event
|
|
interrupt summary */
|
|
#define STATUS_X3201_SFIS 0x80000000 /* second function (Modem)
|
|
interrupt status */
|
|
|
|
|
|
/* CSR6 - Operation Mode */
|
|
#define CSR_OPMODE TULIP_CSR6
|
|
#define OPMODE_HP 0x00000001 /* hash/perfect mode (ro) */
|
|
#define OPMODE_SR 0x00000002 /* start receive */
|
|
#define OPMODE_HO 0x00000004 /* hash only mode (ro) */
|
|
#define OPMODE_PB 0x00000008 /* pass bad frames */
|
|
#define OPMODE_WINB_APP 0x00000008 /* accept all physcal packet */
|
|
#define OPMODE_IF 0x00000010 /* inverse filter mode (ro) */
|
|
#define OPMODE_WINB_AMP 0x00000010 /* accept multicast packet */
|
|
#define OPMODE_SB 0x00000020 /* start backoff counter */
|
|
#define OPMODE_WINB_ABP 0x00000020 /* accept broadcast packet */
|
|
#define OPMODE_PR 0x00000040 /* promiscuous mode */
|
|
#define OPMODE_WINB_ARP 0x00000040 /* accept runt packet */
|
|
#define OPMODE_PM 0x00000080 /* pass all multicast */
|
|
#define OPMODE_WINB_AEP 0x00000080 /* accept error packet */
|
|
#define OPMODE_FKD 0x00000100 /* flaky oscillator disable */
|
|
#define OPMODE_AX_RB 0x00000100 /* receive broadcast packets */
|
|
#define OPMODE_FD 0x00000200 /* full-duplex mode */
|
|
#define OPMODE_OM 0x00000c00 /* operating mode */
|
|
#define OPMODE_OM_NORMAL 0x00000000 /* normal mode */
|
|
#define OPMODE_OM_INTLOOP 0x00000400 /* internal loopback */
|
|
#define OPMODE_OM_EXTLOOP 0x00000800 /* external loopback */
|
|
#define OPMODE_FC 0x00001000 /* force collision */
|
|
#define OPMODE_ST 0x00002000 /* start transmitter */
|
|
#define OPMODE_TR 0x0000c000 /* threshold control */
|
|
#define OPMODE_TR_72 0x00000000 /* 72 bytes */
|
|
#define OPMODE_TR_96 0x00004000 /* 96 bytes */
|
|
#define OPMODE_TR_128 0x00008000 /* 128 bytes */
|
|
#define OPMODE_TR_160 0x0000c000 /* 160 bytes */
|
|
#define OPMODE_WINB_TTH 0x001fc000 /* transmit threshold */
|
|
#define OPMODE_WINB_TTH_SHIFT 14
|
|
#define OPMODE_BP 0x00010000 /* backpressure enable */
|
|
#define OPMODE_CA 0x00020000 /* capture effect enable */
|
|
#define OPMODE_PNIC_TBEN 0x00020000 /* Tx backoff offset enable */
|
|
/*
|
|
* On Davicom DM9102, OPMODE_PS and OPMODE_HBD must
|
|
* always be set.
|
|
*/
|
|
#define OPMODE_PS 0x00040000 /* port select:
|
|
1 = MII/SYM, 0 = SRL
|
|
(21140) */
|
|
#define OPMODE_HBD 0x00080000 /* heartbeat disable:
|
|
set in MII/SYM 100mbps,
|
|
set according to PHY
|
|
in MII 10mbps mode
|
|
(21140) */
|
|
#define OPMODE_PNIC_IT 0x00100000 /* immediate transmit */
|
|
#define OPMODE_SF 0x00200000 /* store and forward mode
|
|
(21140) */
|
|
#define OPMODE_WINB_REIT 0x1fe00000 /* receive eartly intr thresh */
|
|
#define OPMODE_WINB_REIT_SHIFT 21
|
|
#define OPMODE_TTM 0x00400000 /* Transmit Threshold Mode:
|
|
1 = 10mbps, 0 = 100mbps
|
|
(21140) */
|
|
#define OPMODE_PCS 0x00800000 /* PCS function (21140) */
|
|
#define OPMODE_SCR 0x01000000 /* scrambler mode (21140) */
|
|
#define OPMODE_MBO 0x02000000 /* must be one (21140,
|
|
DM9102) */
|
|
#define OPMODE_IDAMSB 0x04000000 /* ignore dest addr MSB
|
|
(21142) */
|
|
#define OPMODE_PNIC_DRC 0x20000000 /* don't include CRC in Rx
|
|
frames (PNIC) */
|
|
#define OPMODE_WINB_FES 0x20000000 /* fast ethernet select */
|
|
#define OPMODE_RA 0x40000000 /* receive all (21140) */
|
|
#define OPMODE_PNIC_EED 0x40000000 /* 1 == ext, 0 == int ENDEC
|
|
(PNIC) */
|
|
#define OPMODE_WINB_TEIO 0x40000000 /* transmit early intr on */
|
|
#define OPMODE_SC 0x80000000 /* special capture effect
|
|
enable (21041+) */
|
|
#define OPMODE_WINB_REIO 0x80000000 /* receive early intr on */
|
|
|
|
/* Shorthand for media-related OPMODE bits */
|
|
#define OPMODE_MEDIA_BITS (OPMODE_FD|OPMODE_PS|OPMODE_TTM|OPMODE_PCS|OPMODE_SCR)
|
|
|
|
/* CSR7 - Interrupt Enable */
|
|
#define CSR_INTEN TULIP_CSR7
|
|
/* See bits for CSR5 -- Status */
|
|
|
|
|
|
/* CSR8 - Missed Frames */
|
|
#define CSR_MISSED TULIP_CSR8
|
|
#define MISSED_MFC 0x0000ffff /* missed packet count */
|
|
#define MISSED_MFO 0x00010000 /* missed packet count
|
|
overflowed */
|
|
#define MISSED_FOC 0x0ffe0000 /* fifo overflow counter
|
|
(21140) */
|
|
#define MISSED_OCO 0x10000000 /* overflow counter overflowed
|
|
(21140) */
|
|
|
|
#define MISSED_GETMFC(x) ((x) & MISSED_MFC)
|
|
#define MISSED_GETFOC(x) (((x) & MISSED_FOC) >> 17)
|
|
|
|
|
|
/* CSR9 - MII, SROM, Boot ROM, Ethernet Address ROM register. */
|
|
#define CSR_MIIROM TULIP_CSR9
|
|
#define MIIROM_DATA 0x000000ff /* byte of data from
|
|
Ethernet Address ROM
|
|
(21040), byte of data
|
|
to/from Boot ROM (21041+) */
|
|
#define MIIROM_SROMCS 0x00000001 /* SROM chip select */
|
|
#define MIIROM_SROMSK 0x00000002 /* SROM clock */
|
|
#define MIIROM_SROMDI 0x00000004 /* SROM data in (to) */
|
|
#define MIIROM_SROMDO 0x00000008 /* SROM data out (from) */
|
|
#define MIIROM_REG 0x00000400 /* external register select */
|
|
#define MIIROM_SR 0x00000800 /* SROM select */
|
|
#define MIIROM_BR 0x00001000 /* boot ROM select */
|
|
#define MIIROM_WR 0x00002000 /* write to boot ROM */
|
|
#define MIIROM_RD 0x00004000 /* read from boot ROM */
|
|
#define MIIROM_MOD 0x00008000 /* mode select (ro) (21041) */
|
|
#define MIIROM_MDC 0x00010000 /* MII clock */
|
|
#define MIIROM_MDO 0x00020000 /* MII data out */
|
|
#define MIIROM_MIIDIR 0x00040000 /* MII direction mode
|
|
1 = PHY in read,
|
|
0 = PHY in write */
|
|
#define MIIROM_MDI 0x00080000 /* MII data in */
|
|
#define MIIROM_DN 0x80000000 /* data not valid (21040) */
|
|
|
|
#define MIIROM_PMAC_LED0SEL 0x10000000 /* 0 == LED0 activity (def)
|
|
1 == LED0 speed */
|
|
#define MIIROM_PMAC_LED1SEL 0x20000000 /* 0 == LED1 link (def)
|
|
1 == LED1 link/act */
|
|
#define MIIROM_PMAC_LED2SEL 0x40000000 /* 0 == LED2 speed (def)
|
|
1 == LED2 collision */
|
|
#define MIIROM_PMAC_LED3SEL 0x80000000 /* 0 == LED3 receive (def)
|
|
1 == LED3 full duplex */
|
|
|
|
/* SROM opcodes */
|
|
#define TULIP_SROM_OPC_ERASE 0x04
|
|
#define TULIP_SROM_OPC_WRITE 0x05
|
|
#define TULIP_SROM_OPC_READ 0x06
|
|
|
|
/* The Lite-On PNIC does this completely differently */
|
|
#define PNIC_MIIROM_DATA 0x0000ffff /* mask of data bits ??? */
|
|
#define PNIC_MIIROM_BUSY 0x80000000 /* EEPROM is busy */
|
|
|
|
|
|
/* CSR10 - Boot ROM address register (21041+). */
|
|
#define CSR_ROMADDR TULIP_CSR10
|
|
#define ROMADDR_MASK 0x000003ff /* boot rom address */
|
|
|
|
|
|
/* CSR11 - General Purpose Timer (21041+). */
|
|
#define CSR_GPT TULIP_CSR11
|
|
#define GPT_VALUE 0x0000ffff /* timer value */
|
|
#define GPT_CON 0x00010000 /* continuous mode */
|
|
/* 21143-PD and 21143-TD Interrupt Mitigation bits */
|
|
#define GPT_NRX 0x000e0000 /* number of Rx packets */
|
|
#define GPT_RXT 0x00f00000 /* Rx timer */
|
|
#define GPT_NTX 0x07000000 /* number of Tx packets */
|
|
#define GPT_TXT 0x78000000 /* Tx timer */
|
|
#define GPT_CYCLE 0x80000000 /* cycle size */
|
|
|
|
|
|
/* CSR12 - SIA Status Register. */
|
|
#define CSR_SIASTAT TULIP_CSR12
|
|
#define SIASTAT_PAUI 0x00000001 /* pin AUI/TP indication
|
|
(21040) */
|
|
#define SIASTAT_MRA 0x00000001 /* MII receive activity
|
|
(21142) */
|
|
#define SIASTAT_NCR 0x00000002 /* network connection error */
|
|
#define SIASTAT_LS100 0x00000002 /* 100baseT link status
|
|
0 == pass (21142) */
|
|
#define SIASTAT_LKF 0x00000004 /* link fail status */
|
|
#define SIASTAT_LS10 0x00000004 /* 10baseT link status
|
|
0 == pass (21142) */
|
|
#define SIASTAT_APS 0x00000008 /* auto polarity status */
|
|
#define SIASTAT_DSD 0x00000010 /* PLL self test done */
|
|
#define SIASTAT_DSP 0x00000020 /* PLL self test pass */
|
|
#define SIASTAT_DAZ 0x00000040 /* PLL all zero */
|
|
#define SIASTAT_DAO 0x00000080 /* PLL all one */
|
|
#define SIASTAT_SRA 0x00000100 /* selected port receive
|
|
activity (21041) */
|
|
#define SIASTAT_ARA 0x00000100 /* AUI receive activity
|
|
(21142) */
|
|
#define SIASTAT_NRA 0x00000200 /* non-selected port
|
|
receive activity (21041) */
|
|
#define SIASTAT_TRA 0x00000200 /* 10base-T receive activity
|
|
(21142) */
|
|
#define SIASTAT_NSN 0x00000400 /* non-stable NLPs detected
|
|
(21041) */
|
|
#define SIASTAT_TRF 0x00000800 /* transmit remote fault
|
|
(21041) */
|
|
#define SIASTAT_ANS 0x00007000 /* autonegotiation state
|
|
(21041) */
|
|
#define SIASTAT_ANS_DIS 0x00000000 /* disabled */
|
|
#define SIASTAT_ANS_TXDIS 0x00001000 /* transmit disabled */
|
|
#define SIASTAT_ANS_START 0x00001000 /* (MX98715AEC) */
|
|
#define SIASTAT_ANS_ABD 0x00002000 /* ability detect */
|
|
#define SIASTAT_ANS_ACKD 0x00003000 /* acknowledge detect */
|
|
#define SIASTAT_ANS_ACKC 0x00004000 /* complete acknowledge */
|
|
#define SIASTAT_ANS_FLPGOOD 0x00005000 /* FLP link good */
|
|
#define SIASTAT_ANS_LINKCHECK 0x00006000 /* link check */
|
|
#define SIASTAT_LPN 0x00008000 /* link partner negotiable
|
|
(21041) */
|
|
#define SIASTAT_LPC 0xffff0000 /* link partner code word */
|
|
|
|
#define SIASTAT_GETLPC(x) (((x) & SIASTAT_LPC) >> 16)
|
|
|
|
|
|
/* CSR13 - SIA Connectivity Register. */
|
|
#define CSR_SIACONN TULIP_CSR13
|
|
#define SIACONN_SRL 0x00000001 /* SIA reset
|
|
(0 == reset) */
|
|
#define SIACONN_PS 0x00000002 /* pin AUI/TP selection
|
|
(21040) */
|
|
#define SIACONN_CAC 0x00000004 /* CSR autoconfiguration */
|
|
#define SIACONN_AUI 0x00000008 /* select AUI (0 = TP) */
|
|
#define SIACONN_EDP 0x00000010 /* SIA PLL external input
|
|
enable (21040) */
|
|
#define SIACONN_ENI 0x00000020 /* encoder input multiplexer
|
|
(21040) */
|
|
#define SIACONN_SIM 0x00000040 /* serial interface input
|
|
multiplexer (21040) */
|
|
#define SIACONN_ASE 0x00000080 /* APLL start enable
|
|
(21040) */
|
|
#define SIACONN_SEL 0x00000f00 /* external port output
|
|
multiplexer select
|
|
(21040) */
|
|
#define SIACONN_IE 0x00001000 /* input enable (21040) */
|
|
#define SIACONN_OE1_3 0x00002000 /* output enable 1, 3
|
|
(21040) */
|
|
#define SIACONN_OE2_4 0x00004000 /* output enable 2, 4
|
|
(21040) */
|
|
#define SIACONN_OE5_6_7 0x00008000 /* output enable 5, 6, 7
|
|
(21040) */
|
|
#define SIACONN_SDM 0x0000ef00 /* SIA diagnostic mode;
|
|
always set to this value
|
|
for normal operation
|
|
(21041) */
|
|
|
|
|
|
/* CSR14 - SIA Transmit Receive Register. */
|
|
#define CSR_SIATXRX TULIP_CSR14
|
|
#define SIATXRX_ECEN 0x00000001 /* encoder enable */
|
|
#define SIATXRX_LBK 0x00000002 /* loopback enable */
|
|
#define SIATXRX_DREN 0x00000004 /* driver enable */
|
|
#define SIATXRX_LSE 0x00000008 /* link pulse send enable */
|
|
#define SIATXRX_CPEN 0x00000030 /* compensation enable */
|
|
#define SIATXRX_CPEN_DIS0 0x00000000 /* disabled */
|
|
#define SIATXRX_CPEN_DIS1 0x00000010 /* disabled */
|
|
#define SIATXRX_CPEN_HIGHPWR 0x00000020 /* high power */
|
|
#define SIATXRX_CPEN_NORMAL 0x00000030 /* normal */
|
|
#define SIATXRX_MBO 0x00000040 /* must be one (21041 pass 2) */
|
|
#define SIATXRX_TH 0x00000040 /* 10baseT HDX enable (21142) */
|
|
#define SIATXRX_ANE 0x00000080 /* autonegotiation enable
|
|
(21041/21142) */
|
|
#define SIATXRX_RSQ 0x00000100 /* receive squelch enable */
|
|
#define SIATXRX_CSQ 0x00000200 /* collision squelch enable */
|
|
#define SIATXRX_CLD 0x00000400 /* collision detect enable */
|
|
#define SIATXRX_SQE 0x00000800 /* signal quality generation
|
|
enable */
|
|
#define SIATXRX_LTE 0x00001000 /* link test enable */
|
|
#define SIATXRX_APE 0x00002000 /* auto-polarity enable */
|
|
#define SIATXRX_SPP 0x00004000 /* set polarity plus */
|
|
#define SIATXRX_TAS 0x00008000 /* 10base-T/AUI autosensing
|
|
enable (21041/21142) */
|
|
#define SIATXRX_THX 0x00010000 /* 100baseTX-HDX (21142) */
|
|
#define SIATXRX_TXF 0x00020000 /* 100baseTX-FDX (21142) */
|
|
#define SIATXRX_T4 0x00040000 /* 100baseT4 (21142) */
|
|
|
|
|
|
/* CSR15 - SIA General Register. */
|
|
#define CSR_SIAGEN TULIP_CSR15
|
|
#define SIAGEN_JBD 0x00000001 /* jabber disable */
|
|
#define SIAGEN_HUJ 0x00000002 /* host unjab */
|
|
#define SIAGEN_JCK 0x00000004 /* jabber clock */
|
|
#define SIAGEN_ABM 0x00000008 /* BNC select (21041) */
|
|
#define SIAGEN_RWD 0x00000010 /* receive watchdog disable */
|
|
#define SIAGEN_RWR 0x00000020 /* receive watchdog release */
|
|
#define SIAGEN_LE1 0x00000040 /* LED 1 enable (21041) */
|
|
#define SIAGEN_LV1 0x00000080 /* LED 1 value (21041) */
|
|
#define SIAGEN_TSCK 0x00000100 /* test clock */
|
|
#define SIAGEN_FUSQ 0x00000200 /* force unsquelch */
|
|
#define SIAGEN_FLF 0x00000400 /* force link fail */
|
|
#define SIAGEN_LSD 0x00000800 /* LED stretch disable
|
|
(21041) */
|
|
#define SIAGEN_LEE 0x00000800 /* Link extend enable (21142) */
|
|
#define SIAGEN_DPST 0x00001000 /* PLL self-test start */
|
|
#define SIAGEN_FRL 0x00002000 /* force receiver low */
|
|
#define SIAGEN_LE2 0x00004000 /* LED 2 enable (21041) */
|
|
#define SIAGEN_RMP 0x00004000 /* received magic packet
|
|
(21143) */
|
|
#define SIAGEN_LV2 0x00008000 /* LED 2 value (21041) */
|
|
#define SIAGEN_HCKR 0x00008000 /* hacker (21143) */
|
|
#define SIAGEN_MD 0x000f0000 /* general purpose mode/data */
|
|
#define SIAGEN_LGS0 0x00100000 /* LED/GEP 0 select */
|
|
#define SIAGEN_LGS1 0x00200000 /* LED/GEP 1 select */
|
|
#define SIAGEN_LGS2 0x00400000 /* LED/GEP 2 select */
|
|
#define SIAGEN_LGS3 0x00800000 /* LED/GEP 3 select */
|
|
#define SIAGEN_GEI0 0x01000000 /* GEP pin 0 intr enable */
|
|
#define SIAGEN_GEI1 0x02000000 /* GEP pin 1 intr enable */
|
|
#define SIAGEN_RME 0x04000000 /* receive match enable */
|
|
#define SIAGEN_CWE 0x08000000 /* control write enable */
|
|
#define SIAGEN_GI0 0x10000000 /* GEP pin 0 interrupt */
|
|
#define SIAGEN_GI1 0x20000000 /* GEP pin 1 interrupt */
|
|
#define SIAGEN_RMI 0x40000000 /* receive match interrupt */
|
|
|
|
|
|
/* CSR12 - General Purpose Port (21140+). */
|
|
#define CSR_GPP TULIP_CSR12
|
|
#define GPP_MD 0x000000ff /* general purpose mode/data */
|
|
#define GPP_GPC 0x00000100 /* general purpose control */
|
|
#define GPP_PNIC_GPD 0x0000000f /* general purpose data */
|
|
#define GPP_PNIC_GPC 0x000000f0 /* general purpose control */
|
|
|
|
#define GPP_PNIC_IN(x) (1 << (x))
|
|
#define GPP_PNIC_OUT(x, on) (((on) << (x)) | (1 << ((x) + 4)))
|
|
|
|
/*
|
|
* The Lite-On PNIC manual recommends the following for the General Purpose
|
|
* I/O pins:
|
|
*
|
|
* 0 Speed Relay 1 == 100mbps
|
|
* 1 100mbps loopback 1 == loopback
|
|
* 2 BNC DC-DC converter 1 == select BNC
|
|
* 3 Link 100 1 == 100baseTX link status
|
|
*/
|
|
#define GPP_PNIC_PIN_SPEED_RLY 0
|
|
#define GPP_PNIC_PIN_100M_LPKB 1
|
|
#define GPP_PNIC_PIN_BNC_XMER 2
|
|
#define GPP_PNIC_PIN_LNK100X 3
|
|
|
|
/*
|
|
* Definitions used for the SMC 9332DST (21140) board.
|
|
*/
|
|
#define GPP_SMC9332DST_PINS 0x3f /* General Purpose Pin directions */
|
|
#define GPP_SMC9332DST_OK10 0x80 /* 10 Mb/sec Signal Detect gep<7> */
|
|
#define GPP_SMC9332DST_OK100 0x40 /* 100 Mb/sec Signal Detect gep<6> */
|
|
#define GPP_SMC9332DST_INIT 0x09 /* No loopback --- point-to-point */
|
|
|
|
/*
|
|
* Definitions used for the Cogent EM1x0 (21140) board.
|
|
*/
|
|
#define GPP_COGENT_EM1x0_PINS 0x3f /* General Purpose Pin directions */
|
|
#define GPP_COGENT_EM1x0_INIT 0x09 /* No loopback --- point-to-point */
|
|
|
|
/*
|
|
* Digital EB140 21140 reference design.
|
|
* MC68832 + ML6671 for 100Mb/s. LXT901 for 10Mb/s.
|
|
*
|
|
* (From document EC-QD2SA-TE, figure 1-3.)
|
|
*/
|
|
#define GPP_EB140_OUTPUTS 0x1f /* these GPP pins are driven */
|
|
#define GPP_EB140_MC68832_LB 0x01 /* 100Mb/s loopback disable 1 */
|
|
#define GPP_EB140_ML6671_LB 0x02 /* 100Mb/s loopback disable 2 */
|
|
#define GPP_EB140_LXT901_ILB 0x04 /* 10Mb/s internal LB enable */
|
|
#define GPP_EB140_LXT901_ELB 0x08 /* 10Mb/s external LB disable */
|
|
#define GPP_EB140_RESERVED 0x10 /* media switch relay on other boards */
|
|
#define GPP_EB140_MC68836_SYNC 0x20 /* synced to 100Mb/s PHY */
|
|
#define GPP_EB140_MC68836_LINK 0x40 /* 100Mb/s signal detect */
|
|
#define GPP_EB140_LXT901_LINK 0x80 /* 10Mb/s link pass */
|
|
|
|
#define GPP_EB140_INIT (GPP_EB140_LXT901_ELB|GPP_EB140_ML6671_LB|GPP_EB140_MC68832_LB)
|
|
|
|
/*
|
|
* Digital Semiconductor 21040 registers.
|
|
*/
|
|
|
|
/* CSR11 - Full Duplex Register */
|
|
#define CSR_21040_FDX TULIP_CSR11
|
|
#define FDX21040_FDXACV 0x0000ffff /* full duplex
|
|
autoconfiguration value */
|
|
|
|
|
|
/* SIA configuration for 10base-T (from the 21040 manual) */
|
|
#define SIACONN_21040_10BASET 0x0000ef01
|
|
#define SIATXRX_21040_10BASET 0x0000ffff
|
|
#define SIAGEN_21040_10BASET 0x00000000
|
|
|
|
|
|
/* SIA configuration for 10base-T full-duplex (from the 21040 manual) */
|
|
#define SIACONN_21040_10BASET_FDX 0x0000ef01
|
|
#define SIATXRX_21040_10BASET_FDX 0x0000fffd
|
|
#define SIAGEN_21040_10BASET_FDX 0x00000000
|
|
|
|
|
|
/* SIA configuration for 10base-5 (from the 21040 manual) */
|
|
#define SIACONN_21040_AUI 0x0000ef09
|
|
#define SIATXRX_21040_AUI 0x00000705
|
|
#define SIAGEN_21040_AUI 0x00000006
|
|
|
|
|
|
/* SIA configuration for External SIA (from the 21040 manual) */
|
|
#define SIACONN_21040_EXTSIA 0x00003041
|
|
#define SIATXRX_21040_EXTSIA 0x00000000
|
|
#define SIAGEN_21040_EXTSIA 0x00000006
|
|
|
|
|
|
/*
|
|
* Digital Semiconductor 21041 registers.
|
|
*/
|
|
|
|
/* SIA configuration for 10base-T (from the 21041 manual) */
|
|
#define SIACONN_21041_10BASET 0x0000ef01
|
|
#define SIATXRX_21041_10BASET 0x0000ff3f
|
|
#define SIAGEN_21041_10BASET 0x00000000
|
|
|
|
#define SIACONN_21041P2_10BASET SIACONN_21041_10BASET
|
|
#define SIATXRX_21041P2_10BASET 0x0000ffff
|
|
#define SIAGEN_21041P2_10BASET SIAGEN_21041_10BASET
|
|
|
|
|
|
/* SIA configuration for 10base-T full-duplex (from the 21041 manual) */
|
|
#define SIACONN_21041_10BASET_FDX 0x0000ef01
|
|
#define SIATXRX_21041_10BASET_FDX 0x0000ff3d
|
|
#define SIAGEN_21041_10BASET_FDX 0x00000000
|
|
|
|
#define SIACONN_21041P2_10BASET_FDX SIACONN_21041_10BASET_FDX
|
|
#define SIATXRX_21041P2_10BASET_FDX 0x0000ffff
|
|
#define SIAGEN_21041P2_10BASET_FDX SIAGEN_21041_10BASET_FDX
|
|
|
|
|
|
/* SIA configuration for 10base-5 (from the 21041 manual) */
|
|
#define SIACONN_21041_AUI 0x0000ef09
|
|
#define SIATXRX_21041_AUI 0x0000f73d
|
|
#define SIAGEN_21041_AUI 0x0000000e
|
|
|
|
#define SIACONN_21041P2_AUI SIACONN_21041_AUI
|
|
#define SIATXRX_21041P2_AUI 0x0000f7fd
|
|
#define SIAGEN_21041P2_AUI SIAGEN_21041_AUI
|
|
|
|
|
|
/* SIA configuration for 10base-2 (from the 21041 manual) */
|
|
#define SIACONN_21041_BNC 0x0000ef09
|
|
#define SIATXRX_21041_BNC 0x0000f73d
|
|
#define SIAGEN_21041_BNC 0x00000006
|
|
|
|
#define SIACONN_21041P2_BNC SIACONN_21041_BNC
|
|
#define SIATXRX_21041P2_BNC 0x0000f7fd
|
|
#define SIAGEN_21041P2_BNC SIAGEN_21041_BNC
|
|
|
|
|
|
/*
|
|
* Digital Semiconductor 21142/21143 registers.
|
|
*/
|
|
|
|
/* SIA configuration for 10baseT (from the 21143 manual) */
|
|
#define SIACONN_21142_10BASET 0x00000001
|
|
#define SIATXRX_21142_10BASET 0x00007f3f
|
|
#define SIAGEN_21142_10BASET 0x00000008
|
|
|
|
|
|
/* SIA configuration for 10baseT full-duplex (from the 21143 manual) */
|
|
#define SIACONN_21142_10BASET_FDX 0x00000001
|
|
#define SIATXRX_21142_10BASET_FDX 0x00007f3d
|
|
#define SIAGEN_21142_10BASET_FDX 0x00000008
|
|
|
|
|
|
/* SIA configuration for 10base5 (from the 21143 manual) */
|
|
#define SIACONN_21142_AUI 0x00000009
|
|
#define SIATXRX_21142_AUI 0x00004705
|
|
#define SIAGEN_21142_AUI 0x0000000e
|
|
|
|
|
|
/* SIA configuration for 10base2 (from the 21143 manual) */
|
|
#define SIACONN_21142_BNC 0x00000009
|
|
#define SIATXRX_21142_BNC 0x00004705
|
|
#define SIAGEN_21142_BNC 0x00000006
|
|
|
|
|
|
/*
|
|
* Lite-On 82C168/82C169 registers.
|
|
*/
|
|
|
|
/* ENDEC General Register */
|
|
#define CSR_PNIC_ENDEC 0x78
|
|
#define PNIC_ENDEC_JDIS 0x00000001 /* jabber disable */
|
|
|
|
/* SROM Power Register */
|
|
#define CSR_PNIC_SROMPWR 0x90
|
|
#define PNIC_SROMPWR_MRLE 0x00000001 /* Memory-Read-Line enable */
|
|
#define PNIC_SROMPWR_CB 0x00000002 /* cache boundary alignment
|
|
burst type; 1 == burst to
|
|
boundary, 0 == single-cycle
|
|
to boundary */
|
|
|
|
/* SROM Control Register */
|
|
#define CSR_PNIC_SROMCTL 0x98
|
|
#define PNIC_SROMCTL_addr 0x0000003f /* mask of address bits */
|
|
/* XXX THESE ARE WRONG ACCORDING TO THE MANUAL! */
|
|
#define PNIC_SROMCTL_READ 0x00000600 /* read command */
|
|
|
|
/* MII Access Register */
|
|
#define CSR_PNIC_MII 0xa0
|
|
#define PNIC_MII_DATA 0x0000ffff /* mask of data bits */
|
|
#define PNIC_MII_REG 0x007c0000 /* register mask */
|
|
#define PNIC_MII_REGSHIFT 18
|
|
#define PNIC_MII_PHY 0x0f800000 /* phy mask */
|
|
#define PNIC_MII_PHYSHIFT 23
|
|
#define PNIC_MII_OPCODE 0x30000000 /* opcode mask */
|
|
#define PNIC_MII_RESERVED 0x00020000 /* must be one/must be zero;
|
|
2 bits are described here */
|
|
#define PNIC_MII_MBO 0x40000000 /* must be one */
|
|
#define PNIC_MII_BUSY 0x80000000 /* MII is busy */
|
|
|
|
#define PNIC_MII_WRITE 0x10000000 /* write PHY command */
|
|
#define PNIC_MII_READ 0x20000000 /* read PHY command */
|
|
|
|
/* NWAY Register */
|
|
#define CSR_PNIC_NWAY 0xb8
|
|
#define PNIC_NWAY_RS 0x00000001 /* reset NWay block */
|
|
#define PNIC_NWAY_PD 0x00000002 /* power down NWay block */
|
|
#define PNIC_NWAY_BX 0x00000004 /* bypass transceiver */
|
|
#define PNIC_NWAY_LC 0x00000008 /* AUI low current mode */
|
|
#define PNIC_NWAY_UV 0x00000010 /* low squelch voltage */
|
|
#define PNIC_NWAY_DX 0x00000020 /* disable TP pol. correction */
|
|
#define PNIC_NWAY_TW 0x00000040 /* select TP (0 == AUI) */
|
|
#define PNIC_NWAY_AF 0x00000080 /* AUI full/half step input
|
|
voltage */
|
|
#define PNIC_NWAY_FD 0x00000100 /* full duplex mode */
|
|
#define PNIC_NWAY_DL 0x00000200 /* disable link integrity
|
|
test */
|
|
#define PNIC_NWAY_DM 0x00000400 /* disable AUI/TP autodetect */
|
|
#define PNIC_NWAY_100 0x00000800 /* 1 == 100mbps, 0 == 10mbps */
|
|
#define PNIC_NWAY_NW 0x00001000 /* enable NWay block */
|
|
#define PNIC_NWAY_CAP10T 0x00002000 /* adv. 10baseT */
|
|
#define PNIC_NWAY_CAP10TFDX 0x00004000 /* adv. 10baseT-FDX */
|
|
#define PNIC_NWAY_CAP100TXFDX 0x00008000 /* adv. 100baseTX-FDX */
|
|
#define PNIC_NWAY_CAP100TX 0x00010000 /* adv. 100baseTX */
|
|
#define PNIC_NWAY_CAP100T4 0x00020000 /* adv. 100base-T4 */
|
|
#define PNIC_NWAY_RN 0x02000000 /* re-negotiate enable */
|
|
#define PNIC_NWAY_RF 0x04000000 /* remote fault detected */
|
|
#define PNIC_NWAY_LPAR10T 0x08000000 /* link part. 10baseT */
|
|
#define PNIC_NWAY_LPAR10TFDX 0x10000000 /* link part. 10baseT-FDX */
|
|
#define PNIC_NWAY_LPAR100TXFDX 0x20000000 /* link part. 100baseTX-FDX */
|
|
#define PNIC_NWAY_LPAR100TX 0x40000000 /* link part. 100baseTX */
|
|
#define PNIC_NWAY_LPAR100T4 0x80000000 /* link part. 100base-T4 */
|
|
#define PNIC_NWAY_LPAR_MASK 0xf8000000
|
|
|
|
|
|
/*
|
|
* Macronix 98713, 98713A, 98715, 98715A, 98715AEC, 98725 and
|
|
* Lite-On 82C115 registers.
|
|
*/
|
|
|
|
/*
|
|
* Note, the MX98713 is very Tulip-like:
|
|
*
|
|
* CSR12 General Purpose Port (like 21140)
|
|
* CSR13 reserved
|
|
* CSR14 reserved
|
|
* CSR15 Watchdog Timer (like 21140)
|
|
*
|
|
* The Macronix CSR12, CSR13, CSR14, and CSR15 exist only
|
|
* on the MX98713A and higher.
|
|
*/
|
|
|
|
/* CSR12 - 10base-T Status Port (similar to SIASTAT) */
|
|
/* See SIASTAT 21142/21143 bits */
|
|
#define CSR_PMAC_10TSTAT TULIP_CSR12
|
|
#define PMAC_SIASTAT_MASK (SIASTAT_LS100|SIASTAT_LS10| \
|
|
SIASTAT_APS|SIASTAT_TRF|SIASTAT_ANS| \
|
|
SIASTAT_LPN|SIASTAT_LPC)
|
|
|
|
|
|
/* CSR13 - NWAY Reset Register */
|
|
#define CSR_PMAC_NWAYRESET TULIP_CSR13
|
|
/* See SIACONN 21142/21143 bits */
|
|
#define PMAC_SIACONN_MASK (SIACONN_SRL)
|
|
#define PMAC_NWAYRESET_100TXRESET 0x00000002 /* 100base PMD reset */
|
|
|
|
|
|
/* CSR14 - 10base-T Control Port */
|
|
#define CSR_PMAC_10TCTL TULIP_CSR14
|
|
/* See SIATXRX 21142/21143 bits */
|
|
#define PMAC_SIATXRX_MASK (SIATXRX_LBK|SIATXRX_DREN|SIATXRX_TH| \
|
|
SIATXRX_ANE|SIATXRX_RSQ|SIATXRX_LTE| \
|
|
SIATXRX_THX|SIATXRX_TXF|SIATXRX_T4)
|
|
|
|
|
|
/* CSR15 - Watchdog Timer Register */
|
|
/* MX98713: see 21140 CSR15 */
|
|
/* others: see SIAGEN 21142/21143 bits */
|
|
#define PMAC_SIAGEN_MASK (SIAGEN_JBD|SIAGEN_HUJ|SIAGEN_JCK| \
|
|
SIAGEN_RWD|SIAGEN_RWR)
|
|
|
|
|
|
/* CSR16 - Test Operation Register (a.k.a. Magic Packet Register) */
|
|
#define CSR_PMAC_TOR TULIP_CSR16
|
|
#define PMAC_TOR_98713 0x0F370000
|
|
#define PMAC_TOR_98715 0x0B3C0000
|
|
|
|
|
|
/* CSR20 - NWAY Status */
|
|
#define CSR_PMAC_NWAYSTAT TULIP_CSR20
|
|
/*
|
|
* Note: the MX98715A manual claims that EQTEST and PCITEST
|
|
* must be set to 1 by software for normal operation, but
|
|
* this does not appear to be necessary. This is probably
|
|
* one of the things that frobbing the Test Operation Register
|
|
* does.
|
|
*
|
|
* MX98715AEC uses this register for Auto Compensation.
|
|
* CSR20<14> and CSR20<9> are called DS130 and DS120
|
|
*/
|
|
#define PMAC_NWAYSTAT_DS120 0x00000200 /* Auto-compensation circ */
|
|
#define PMAC_NWAYSTAT_DS130 0x00004000 /* Auto-compensation circ */
|
|
#define PMAC_NWAYSTAT_EQTEST 0x00001000 /* EQ test */
|
|
#define PMAC_NWAYSTAT_PCITEST 0x00010000 /* PCI test */
|
|
#define PMAC_NWAYSTAT_10TXH 0x08000000 /* 10t accepted */
|
|
#define PMAC_NWAYSTAT_10TXF 0x10000000 /* 10t-fdx accepted */
|
|
#define PMAC_NWAYSTAT_100TXH 0x20000000 /* 100tx accepted */
|
|
#define PMAC_NWAYSTAT_100TXF 0x40000000 /* 100tx-fdx accepted */
|
|
#define PMAC_NWAYSTAT_T4 0x80000000 /* 100t4 accepted */
|
|
|
|
|
|
/* CSR21 - Flow Control Register */
|
|
#define CSR_PNICII_FLOWCTL TULIP_CSR21
|
|
#define PNICII_FLOWCTL_WKFCATEN 0x00000010 /* enable wake-up frame
|
|
catenation feature */
|
|
#define PNICII_FLOWCTL_NFCE 0x00000020 /* accept flow control result
|
|
from NWay */
|
|
#define PNICII_FLOWCTL_FCTH0 0x00000040 /* rx flow control thresh 0 */
|
|
#define PNICII_FLOWCTL_FCTH1 0x00000080 /* rx flow control thresh 1 */
|
|
#define PNICII_FLOWCTL_REJECTFC 0x00000100 /* abort rx flow control */
|
|
#define PNICII_FLOWCTL_STOPTX 0x00000200 /* tx flow stopped */
|
|
#define PNICII_FLOWCTL_RUFCEN 0x00000400 /* send flow control when
|
|
RU interrupt occurs */
|
|
#define PNICII_FLOWCTL_RXFCEN 0x00000800 /* rx flow control enable */
|
|
#define PNICII_FLOWCTL_TXFCEN 0x00001000 /* tx flow control enable */
|
|
#define PNICII_FLOWCTL_RESTOP 0x00002000 /* restop mode */
|
|
#define PNICII_FLOWCTL_RESTART 0x00004000 /* restart mode */
|
|
#define PNICII_FLOWCTL_TEST 0x00008000 /* test flow control timer */
|
|
#define PNICII_FLOWCTL_TMVAL 0xffff0000 /* timer value in flow
|
|
control frame */
|
|
|
|
#define PNICII_FLOWCTL_TH_512 (PNICII_FLOWCTL_FCTH0|PNICII_FLOWCTL_FCTH1)
|
|
#define PNICII_FLOWCTL_TH_256 (PNICII_FLOWCTL_FCTH1)
|
|
#define PNICII_FLOWCTL_TH_128 (PNICII_FLOWCTL_FCTH0)
|
|
#define PNICII_FLOWCTL_TH_OVFLW (0)
|
|
|
|
|
|
/* CSR22 - MAC ID Byte 3-0 Register */
|
|
#define CSR_PNICII_MACID0 TULIP_CSR22
|
|
#define PNICII_MACID_1 0 /* shift */
|
|
#define PNICII_MACID_0 8 /* shift */
|
|
#define PNICII_MACID_3 16 /* shift */
|
|
#define PNICII_MACID_2 24 /* shift */
|
|
|
|
|
|
/* CSR23 - Magic ID Byte 5,4/MACID Byte 5,4 Register */
|
|
#define PNICII_MACID_5 0 /* shift */
|
|
#define PNICII_MACID_4 8 /* shift */
|
|
#define PNICII_MAGID_5 16 /* shift */
|
|
#define PNICII_MAGIC_4 24 /* shift */
|
|
|
|
|
|
/* CSR24 - Magic ID Byte 3-0 Register */
|
|
#define PNICII_MAGID_1 0 /* shift */
|
|
#define PNICII_MAGID_0 8 /* shift */
|
|
#define PNICII_MAGID_3 16 /* shift */
|
|
#define PNICII_MAGID_2 24 /* shift */
|
|
|
|
|
|
/* CSR25 - CSR28 - Filter Byte Mask Registers */
|
|
#define CSR_PNICII_MASK0 TULIP_CSR25
|
|
|
|
#define CSR_PNICII_MASK1 TULIP_CSR26
|
|
|
|
#define CSR_PNICII_MASK2 TULIP_CSR27
|
|
|
|
#define CSR_PNICII_MASK3 TULIP_CSR28
|
|
|
|
|
|
/* CSR29 - Filter Offset Register */
|
|
#define CSR_PNICII_FILOFF TULIP_CSR29
|
|
#define PNICII_FILOFF_PAT0 0x0000007f /* pattern 0 offset */
|
|
#define PNICII_FILOFF_EN0 0x00000080 /* enable pattern 0 */
|
|
#define PNICII_FILOFF_PAT1 0x00007f00 /* pattern 1 offset */
|
|
#define PNICII_FILOFF_EN1 0x00008000 /* enable pattern 1 */
|
|
#define PNICII_FILOFF_PAT2 0x007f0000 /* pattern 2 offset */
|
|
#define PNICII_FILOFF_EN2 0x00800000 /* enable pattern 2 */
|
|
#define PNICII_FILOFF_PAT3 0x7f000000 /* pattern 3 offset */
|
|
#define PNICII_FILOFF_EN3 0x80000000 /* enable pattern 3 */
|
|
|
|
|
|
/* CSR30 - Filter 1 and 0 CRC-16 Register */
|
|
#define CSR_PNICII_FIL01 TULIP_CSR30
|
|
#define PNICII_FIL01_CRC0 0x0000ffff /* CRC-16 of pattern 0 */
|
|
#define PNICII_FIL01_CRC1 0xffff0000 /* CRC-16 of pattern 1 */
|
|
|
|
|
|
/* CSR31 = Filter 3 and 2 CRC-16 Register */
|
|
#define CSR_PNICII_FIL23 TULIP_CSR31
|
|
#define PNICII_FIL23_CRC2 0x0000ffff /* CRC-16 of pattern 2 */
|
|
#define PNICII_FIL23_CRC3 0xffff0000 /* CRC-16 of pattern 3 */
|
|
|
|
|
|
/*
|
|
* Winbond 89C840F registers.
|
|
*/
|
|
|
|
/* CSR12 - Current Receive Descriptor Register */
|
|
#define CSR_WINB_CRDAR TULIP_CSR12
|
|
|
|
|
|
/* CSR13 - Current Receive Buffer Register */
|
|
#define CSR_WINB_CCRBAR TULIP_CSR13
|
|
|
|
|
|
/* CSR14 - Multicast Address Register 0 */
|
|
#define CSR_WINB_CMA0 TULIP_CSR14
|
|
|
|
|
|
/* CSR15 - Multicast Address Register 1 */
|
|
#define CSR_WINB_CMA1 TULIP_CSR15
|
|
|
|
|
|
/* CSR16 - Physical Address Register 0 */
|
|
#define CSR_WINB_CPA0 TULIP_CSR16
|
|
|
|
|
|
/* CSR17 - Physical Address Register 1 */
|
|
#define CSR_WINB_CPA1 TULIP_CSR17
|
|
|
|
|
|
/* CSR18 - Boot ROM Size Register */
|
|
#define CSR_WINB_CBRCR TULIP_CSR18
|
|
#define WINB_CBRCR_NONE 0x00000000 /* no boot rom */
|
|
/* 0x00000001 also no boot rom */
|
|
#define WINB_CBRCR_8K 0x00000002 /* 8k */
|
|
#define WINB_CBRCR_16K 0x00000003 /* 16k */
|
|
#define WINB_CBRCR_32K 0x00000004 /* 32k */
|
|
#define WINB_CBRCR_64K 0x00000005 /* 64k */
|
|
#define WINB_CBRCR_128K 0x00000006 /* 128k */
|
|
#define WINB_CBRCR_256K 0x00000007
|
|
|
|
|
|
/* CSR19 - Current Transmit Descriptor Register */
|
|
#define CSR_WINB_CTDAR TULIP_CSR19
|
|
|
|
|
|
/* CSR20 - Current Transmit Buffer Register */
|
|
#define CSR_WINB_CTBAR TULIP_CSR20
|
|
|
|
|
|
/*
|
|
* ADMtek AL981 registers
|
|
*
|
|
* We define these as strict byte offsets into PCI space, since
|
|
* not all of them have consistent access rules.
|
|
*/
|
|
|
|
/* CSR13 - Wake-up Control/Status Register */
|
|
#define CSR_ADM_WCSR 0x68
|
|
#define ADM_WCSR_LSC 0x00000001 /* link status changed */
|
|
#define ADM_WCSR_MPR 0x00000002 /* magic packet received */
|
|
#define ADM_WCSR_WFR 0x00000004 /* wake up frame received */
|
|
#define ADM_WCSR_LSCE 0x00000100 /* link status changed en. */
|
|
#define ADM_WCSR_MPRE 0x00000200 /* magic packet receive en. */
|
|
#define ADM_WCSR_WFRE 0x00000400 /* wake up frame receive en. */
|
|
#define ADM_WCSR_LINKON 0x00010000 /* link-on detect en. */
|
|
#define ADM_WCSR_LINKOFF 0x00020000 /* link-off detect en. */
|
|
#define ADM_WCSR_WP5E 0x02000000 /* wake up pat. 5 en. */
|
|
#define ADM_WCSR_WP4E 0x04000000 /* wake up pat. 4 en. */
|
|
#define ADM_WCSR_WP3E 0x08000000 /* wake up pat. 3 en. */
|
|
#define ADM_WCSR_WP2E 0x10000000 /* wake up pat. 2 en. */
|
|
#define ADM_WCSR_WP1E 0x20000000 /* wake up pat. 1 en. */
|
|
#define ADM_WCSR_CRCT 0x40000000 /* CRC-16 type:
|
|
0 == 0000 initial
|
|
1 == ffff initial */
|
|
|
|
|
|
/* CSR14 - Wake-up Pattern Data Register */
|
|
#define CSR_ADM_WPDR 0x70
|
|
|
|
/*
|
|
* 25 consecutive longword writes are issued to WPDR to
|
|
* program the wake-up pattern filter. The data written
|
|
* is as follows:
|
|
*
|
|
* XXX
|
|
*/
|
|
|
|
|
|
/* CSR15 - see 21140 CSR15 (Watchdog Timer) */
|
|
|
|
|
|
/* CSR16 - Assistant CSR5 (Status Register 2) */
|
|
#define CSR_ADM_ASR 0x80
|
|
/* 0 - 14: same as CSR5 */
|
|
#define ADM_ASR_AAISS 0x00080000 /* added abnormal int. sum. */
|
|
#define ADM_ASR_ANISS 0x00010000 /* added normal int. sum. */
|
|
/* XXX Receive state */
|
|
/* XXX Transmit state */
|
|
#define ADM_ASR_BET 0x03800000 /* bus error type */
|
|
#define ADM_ASR_BET_PERR 0x00000000 /* parity error */
|
|
#define ADM_ASR_BET_MABT 0x00800000 /* master abort */
|
|
#define ADM_ASR_BET_TABT 0x01000000 /* target abort */
|
|
#define ADM_ASR_PFR 0x04000000 /* PAUSE frame received */
|
|
#define ADM_ASR_TDIS 0x10000000 /* transmit def. int. status */
|
|
#define ADM_ASR_XIS 0x20000000 /* xcvr int. status */
|
|
#define ADM_ASR_REIS 0x40000000 /* receive early int. status */
|
|
#define ADM_ASR_TEIS 0x80000000 /* transmit early int. status */
|
|
|
|
|
|
/* CSR17 - Assistant CSR7 (Interrupt Enable Register 2) */
|
|
#define CSR_ADM_AIE 0x84
|
|
/* See CSR16 for valid bits */
|
|
|
|
|
|
/* CSR18 - Command Register */
|
|
#define CSR_ADM_CR 0x88
|
|
#define ADM_CR_ATUR 0x00000001 /* auto. tx underrun recover */
|
|
#define ADM_CR_SINT 0x00000002 /* software interrupt */
|
|
#define ADM_CR_DRT 0x0000000c /* drain receive threshold */
|
|
#define ADM_CR_DRT_8LW 0x00000000 /* 8 longwords */
|
|
#define ADM_CR_DRT_16LW 0x00000004 /* 16 longwords */
|
|
#define ADM_CR_DRT_SF 0x00000008 /* store-and-forward */
|
|
#define ADM_CR_RTE 0x00000010 /* receive threshold enable */
|
|
#define ADM_CR_PAUSE 0x00000020 /* enable PAUSE function */
|
|
#define ADM_CR_RWP 0x00000040 /* reset wake-up pattern
|
|
data register pointer */
|
|
/* 16 - 31 are automatically recalled from the EEPROM */
|
|
#define ADM_CR_WOL 0x00040000 /* wake-on-lan enable */
|
|
#define ADM_CR_PM 0x00080000 /* power management enable */
|
|
#define ADM_CR_RFS 0x00600000 /* Receive FIFO size */
|
|
#define ADM_CR_RFS_1K 0x00600000 /* 1K FIFO */
|
|
#define ADM_CR_RFS_2K 0x00400000 /* 2K FIFO */
|
|
#define ADM_CR_LEDMODE 0x00800000 /* LED mode */
|
|
#define ADM_CR_AUXCL 0x30000000 /* aux current load */
|
|
#define ADM_CR_D3CS 0x80000000 /* D3 cold wake up enable */
|
|
|
|
|
|
/* CSR19 - PCI bus performance counter */
|
|
#define CSR_ADM_PCIC 0x8c
|
|
#define ADM_PCIC_DWCNT 0x000000ff /* double-word count of
|
|
last bus-master
|
|
transaction */
|
|
#define ADM_PCIC_CLKCNT 0xffff0000 /* number of PCI clocks
|
|
between read request
|
|
and access completed */
|
|
|
|
/* CSR20 - Power Management Control/Status Register */
|
|
#define CSR_ADM_PMCSR 0x90
|
|
/*
|
|
* This register is also mapped into the PCI configuration
|
|
* space as the PMCSR.
|
|
*/
|
|
|
|
|
|
/* CSR23 - Transmit Burst Count/Time Out Register */
|
|
#define CSR_ADM_TXBR 0x9c
|
|
#define ADM_TXBR_TTO 0x00000fff /* transmit timeout */
|
|
#define ADM_TXBR_TBCNT 0x001f0000 /* transmit burst count */
|
|
|
|
|
|
/* CSR24 - Flash ROM Port Register */
|
|
#define CSR_ADM_FROM 0xa0
|
|
#define ADM_FROM_DATA 0x000000ff /* data to/from Flash */
|
|
#define ADM_FROM_ADDR 0x01ffff00 /* Flash address */
|
|
#define ADM_FROM_ADDR_SHIFT 8
|
|
#define ADM_FROM_WEN 0x04000000 /* write enable */
|
|
#define ADM_FROM_REN 0x08000000 /* read enable */
|
|
#define ADM_FROM_bra16on 0x80000000 /* pin 87 is brA16, else
|
|
pin 87 is fd/col LED pin */
|
|
|
|
|
|
/* CSR25 - Physical Address Register 0 */
|
|
#define CSR_ADM_PAR0 0xa4
|
|
|
|
|
|
/* CSR26 - Physical Address Register 1 */
|
|
#define CSR_ADM_PAR1 0xa8
|
|
|
|
|
|
/* CSR27 - Multicast Address Register 0 */
|
|
#define CSR_ADM_MAR0 0xac
|
|
|
|
|
|
/* CSR28 - Multicast Address Register 1 */
|
|
#define CSR_ADM_MAR1 0xb0
|
|
|
|
|
|
/* Internal PHY registers are mapped here (lower 16 bits valid) */
|
|
|
|
#define CSR_ADM_BMCR 0xb4
|
|
#define CSR_ADM_BMSR 0xb8
|
|
#define CSR_ADM_PHYIDR1 0xbc
|
|
#define CSR_ADM_PHYIDR2 0xc0
|
|
#define CSR_ADM_ANAR 0xc4
|
|
#define CSR_ADM_ANLPAR 0xc8
|
|
#define CSR_ADM_ANER 0xcc
|
|
|
|
/* XCVR Mode Control Register */
|
|
#define CSR_ADM_XMC 0xd0
|
|
#define ADM_XMC_LD 0x00000800 /* long distance mode
|
|
(low squelch enable) */
|
|
|
|
|
|
/* XCVR Configuration Information and Interrupt Status Register */
|
|
#define CSR_ADM_XCIIS 0xd4
|
|
#define ADM_XCIIS_REF 0x0001 /* 64 error packets received */
|
|
#define ADM_XCIIS_ANPR 0x0002 /* autoneg page received */
|
|
#define ADM_XCIIS_PDF 0x0004 /* parallel detection fault */
|
|
#define ADM_XCIIS_ANAR 0x0008 /* autoneg ACK */
|
|
#define ADM_XCIIS_LS 0x0010 /* link status (1 == fail) */
|
|
#define ADM_XCIIS_RFD 0x0020 /* remote fault */
|
|
#define ADM_XCIIS_ANC 0x0040 /* autoneg completed */
|
|
#define ADM_XCIIS_PAUSE 0x0080 /* PAUSE enabled */
|
|
#define ADM_XCIIS_DUPLEX 0x0100 /* full duplex */
|
|
#define ADM_XCIIS_SPEED 0x0200 /* 100Mb/s */
|
|
|
|
|
|
/* XCVR Interrupt Enable Register */
|
|
#define CSR_ADM_XIE 0xd8
|
|
/* Bits are as for XCIIS */
|
|
|
|
|
|
/* XCVR 100baseTX PHY Control/Status Register */
|
|
#define CSR_ADM_100CTR 0xdc
|
|
#define ADM_100CTR_DISCRM 0x0001 /* disable scrambler */
|
|
#define ADM_100CTR_DISMLT 0x0002 /* disable MLT3 ENDEC */
|
|
#define ADM_100CTR_CMODE 0x001c /* current operating mode */
|
|
#define ADM_100CTR_CMODE_AUTO 0x0000 /* in autoneg */
|
|
#define ADM_100CTR_CMODE_10 0x0004 /* 10baseT */
|
|
#define ADM_100CTR_CMODE_100 0x0008 /* 100baseTX */
|
|
/* 0x000c reserved */
|
|
/* 0x0010 reserved */
|
|
#define ADM_100CTR_CMODE_10FD 0x0014 /* 10baseT-FDX */
|
|
#define ADM_100CTR_CMODE_100FD 0x0018 /* 100baseTX-FDX */
|
|
#define ADM_100CTR_CMODE_ISO 0x001c /* isolated */
|
|
#define ADM_100CTR_ISOTX 0x0020 /* transmit isolation */
|
|
#define ADM_100CTR_ENRZI 0x0080 /* enable NRZ <> NRZI conv. */
|
|
#define ADM_100CTR_ENDCR 0x0100 /* enable DC restoration */
|
|
#define ADM_100CTR_ENRLB 0x0200 /* enable remote loopback */
|
|
#define ADM_100CTR_RXVPP 0x0800 /* peak Rx voltage:
|
|
0 == 1.0 VPP
|
|
1 == 1.4 VPP */
|
|
#define ADM_100CTR_ANC 0x1000 /* autoneg completed */
|
|
#define ADM_100CTR_DISRER 0x2000 /* disable Rx error counter */
|
|
|
|
/* Operation Mode Register (AN983) */
|
|
#define CSR_ADM983_OPMODE 0xfc
|
|
#define ADM983_OPMODE_SPEED 0x80000000 /* 1 == 100, 0 == 10 */
|
|
#define ADM983_OPMODE_FD 0x40000000 /* 1 == fd, 0 == hd */
|
|
#define ADM983_OPMODE_LINK 0x20000000 /* 1 == link, 0 == no link */
|
|
#define ADM983_OPMODE_EERLOD 0x04000000 /* reload from EEPROM */
|
|
#define ADM983_OPMODE_SingleChip 0x00000007 /* single-chip mode */
|
|
#define ADM983_OPMODE_MacOnly 0x00000004 /* MAC-only mode */
|
|
|
|
/*
|
|
* Xircom X3201-3 registers
|
|
*/
|
|
|
|
/* Power Management Register */
|
|
#define CSR_X3201_PMR TULIP_CSR16
|
|
#define X3201_PMR_EDINT 0x0000000f /* energy detect interval */
|
|
#define X3201_PMR_EDEN 0x00000100 /* energy detect enable */
|
|
#define X3201_PMR_MPEN 0x00000200 /* magic packet enable */
|
|
#define X3201_PMR_WOLEN 0x00000400 /* Wake On Lan enable */
|
|
#define X3201_PMR_PMGP0EN 0x00001000 /* GP0 change enable */
|
|
#define X3201_PMR_PMLCEN 0x00002000 /* link change enable */
|
|
#define X3201_PMR_WOLTMEN 0x00008000 /* WOL template mem enable */
|
|
#define X3201_PMR_EP 0x00010000 /* energy present */
|
|
#define X3201_PMR_LP 0x00200000 /* link present */
|
|
#define X3201_PMR_EDES 0x01000000 /* ED event status */
|
|
#define X3201_PMR_MPES 0x02000000 /* MP event status */
|
|
#define X3201_PMR_WOLES 0x04000000 /* WOL event status */
|
|
#define X3201_PMR_WOLPS 0x08000000 /* WOL process status */
|
|
#define X3201_PMR_GP0ES 0x10000000 /* GP0 event status */
|
|
#define X3201_PMR_LCES 0x20000000 /* LC event status */
|
|
|
|
/*
|
|
* Davicom DM9102 registers.
|
|
*/
|
|
|
|
/* PHY Status Register */
|
|
#define CSR_DM_PHYSTAT TULIP_CSR12
|
|
#define DM_PHYSTAT_10 0x00000001 /* 10Mb/s */
|
|
#define DM_PHYSTAT_100 0x00000002 /* 100Mb/s */
|
|
#define DM_PHYSTAT_FDX 0x00000004 /* full-duplex */
|
|
#define DM_PHYSTAT_LINK 0x00000008 /* link up */
|
|
#define DM_PHYSTAT_RXLOCK 0x00000010 /* RX-lock */
|
|
#define DM_PHYSTAT_SIGNAL 0x00000020 /* signal detection */
|
|
#define DM_PHYSTAT_UTPSIG 0x00000040 /* UTP SIG */
|
|
#define DM_PHYSTAT_GPED 0x00000080 /* general PHY reset control */
|
|
#define DM_PHYSTAT_GEPC 0x00000100 /* GPED bits control */
|
|
|
|
|
|
/* Sample Frame Access Register */
|
|
#define CSR_DM_SFAR TULIP_CSR13
|
|
|
|
|
|
/* Sample Frame Data Register */
|
|
#define CSR_DM_SFDR TULIP_CSR14
|
|
/* See 21143 SIAGEN register */
|
|
|
|
/*
|
|
* ASIX AX88140A and AX88141 registers.
|
|
*/
|
|
|
|
/* CSR13 - Filtering Index */
|
|
#define CSR_AX_FILTIDX TULIP_CSR13
|
|
|
|
/* CSR14 - Filtering data */
|
|
#define CSR_AX_FILTDATA TULIP_CSR14
|
|
|
|
/* Filtering Index values */
|
|
#define AX_FILTIDX_PAR0 0x00000000
|
|
#define AX_FILTIDX_PAR1 0x00000001
|
|
#define AX_FILTIDX_MAR0 0x00000002
|
|
#define AX_FILTIDX_MAR1 0x00000003
|
|
|
|
#endif /* _DEV_IC_TULIPREG_H_ */
|