329 lines
8.7 KiB
C
329 lines
8.7 KiB
C
/* $NetBSD: rlphy.c,v 1.1 2006/01/04 21:52:17 xtraeme Exp $ */
|
|
/* $OpenBSD: rlphy.c,v 1.20 2005/07/31 05:27:30 pvalchev Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1998, 1999 Jason L. Wright (jason@thought.net)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for the internal PHY found on RTL8139 based nics, based
|
|
* on drivers for the 'exphy' (Internal 3Com phys) and 'nsphy'
|
|
* (National Semiconductor DP83840).
|
|
*/
|
|
|
|
/*
|
|
* Ported to NetBSD by Juan Romero Pardines <xtraeme@NetBSD.org>
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: rlphy.c,v 1.1 2006/01/04 21:52:17 xtraeme Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include <dev/mii/miidevs.h>
|
|
#include <machine/bus.h>
|
|
#include <dev/ic/rtl81x9reg.h>
|
|
|
|
int rlphymatch(struct device *, struct cfdata *, void *);
|
|
void rlphyattach(struct device *, struct device *, void *);
|
|
|
|
CFATTACH_DECL(rlphy, sizeof(struct mii_softc),
|
|
rlphymatch, rlphyattach, mii_phy_detach, mii_phy_activate);
|
|
|
|
int rlphy_service(struct mii_softc *, struct mii_data *, int);
|
|
void rlphy_status(struct mii_softc *);
|
|
|
|
const struct mii_phy_funcs rlphy_funcs = {
|
|
rlphy_service, rlphy_status, mii_phy_reset,
|
|
};
|
|
|
|
int
|
|
rlphymatch(struct device *parent, struct cfdata *match, void *aux)
|
|
{
|
|
struct mii_attach_args *ma = aux;
|
|
|
|
/* Test for RealTek 8201L PHY */
|
|
if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_REALTEK &&
|
|
MII_MODEL(ma->mii_id2) == MII_MODEL_yyREALTEK_RTL8201L) {
|
|
return 10;
|
|
}
|
|
|
|
if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 ||
|
|
MII_MODEL(ma->mii_id2) != 0)
|
|
return 0;
|
|
|
|
if (strcmp(parent->dv_cfdata->cf_name, "rtk") != 0)
|
|
return 0;
|
|
|
|
/*
|
|
* A "real" phy should get preference, but on the 8139 there
|
|
* is no phyid register.
|
|
*/
|
|
return 5;
|
|
}
|
|
|
|
void
|
|
rlphyattach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct mii_softc *sc = (struct mii_softc *)self;
|
|
struct mii_attach_args *ma = aux;
|
|
struct mii_data *mii = ma->mii_data;
|
|
|
|
if (MII_MODEL(ma->mii_id2) == MII_MODEL_yyREALTEK_RTL8201L) {
|
|
aprint_normal(": %s, rev. %d\n", MII_STR_yyREALTEK_RTL8201L,
|
|
MII_REV(ma->mii_id2));
|
|
} else
|
|
aprint_normal(": Realtek internal PHY\n");
|
|
|
|
sc->mii_inst = mii->mii_instance;
|
|
sc->mii_phy = ma->mii_phyno;
|
|
sc->mii_funcs = &rlphy_funcs;
|
|
sc->mii_pdata = mii;
|
|
sc->mii_flags = ma->mii_flags;
|
|
|
|
sc->mii_flags |= MIIF_NOISOLATE;
|
|
|
|
PHY_RESET(sc);
|
|
|
|
aprint_normal("%s: ", sc->mii_dev.dv_xname);
|
|
sc->mii_capabilities =
|
|
PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
|
|
if (sc->mii_capabilities & BMSR_MEDIAMASK)
|
|
mii_phy_add_media(sc);
|
|
aprint_normal("\n");
|
|
}
|
|
|
|
int
|
|
rlphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
|
|
int rv;
|
|
|
|
if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0)
|
|
return ENXIO;
|
|
|
|
/*
|
|
* Can't isolate the RTL8139 phy, so it has to be the only one.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
panic("rlphy_service: attempt to isolate phy");
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the interface is not up, don't do anything.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
break;
|
|
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_AUTO:
|
|
/*
|
|
* If we're already in auto mode, just return.
|
|
*/
|
|
if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN)
|
|
return (0);
|
|
(void) mii_phy_auto(sc, 0);
|
|
break;
|
|
case IFM_100_T4:
|
|
/*
|
|
* XXX Not supported as a manual setting right now.
|
|
*/
|
|
return (EINVAL);
|
|
default:
|
|
/*
|
|
* BMCR data is stored in the ifmedia entry.
|
|
*/
|
|
switch (ife->ifm_media &
|
|
(IFM_TMASK|IFM_NMASK|IFM_FDX)) {
|
|
case IFM_ETHER|IFM_10_T:
|
|
rv = ANAR_10|ANAR_CSMA;
|
|
break;
|
|
case IFM_ETHER|IFM_10_T|IFM_FDX:
|
|
rv = ANAR_10_FD|ANAR_CSMA;
|
|
break;
|
|
case IFM_ETHER|IFM_100_TX:
|
|
rv = ANAR_TX|ANAR_CSMA;
|
|
break;
|
|
case IFM_ETHER|IFM_100_TX|IFM_FDX:
|
|
rv = ANAR_TX_FD|ANAR_CSMA;
|
|
break;
|
|
case IFM_ETHER|IFM_100_T4:
|
|
rv = ANAR_T4|ANAR_CSMA;
|
|
break;
|
|
default:
|
|
rv = 0;
|
|
break;
|
|
}
|
|
|
|
PHY_WRITE(sc, MII_ANAR, rv);
|
|
PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
|
|
}
|
|
break;
|
|
|
|
case MII_TICK:
|
|
/*
|
|
* Is the interface even up?
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Only used for autonegotiation.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
|
|
break;
|
|
|
|
/*
|
|
* The RealTek PHY's autonegotiation doesn't need to be
|
|
* kicked; it continues in the background.
|
|
*/
|
|
break;
|
|
|
|
case MII_DOWN:
|
|
mii_phy_down(sc);
|
|
return (0);
|
|
}
|
|
|
|
/* Update the media status. */
|
|
mii_phy_status(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
rlphy_status(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int bmsr, bmcr, anlpar;
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
|
|
if (bmsr & BMSR_LINK)
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
bmcr = PHY_READ(sc, MII_BMCR);
|
|
if (bmcr & BMCR_ISO) {
|
|
mii->mii_media_active |= IFM_NONE;
|
|
mii->mii_media_status = 0;
|
|
return;
|
|
}
|
|
|
|
if (bmcr & BMCR_LOOP)
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
if (bmcr & BMCR_AUTOEN) {
|
|
/*
|
|
* NWay autonegotiation takes the highest-order common
|
|
* bit of the ANAR and ANLPAR (i.e. best media advertised
|
|
* both by us and our link partner).
|
|
*/
|
|
if ((bmsr & BMSR_ACOMP) == 0) {
|
|
/* Erg, still trying, I guess... */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
if ((anlpar = PHY_READ(sc, MII_ANAR) &
|
|
PHY_READ(sc, MII_ANLPAR))) {
|
|
if (anlpar & ANLPAR_T4)
|
|
mii->mii_media_active |= IFM_100_T4;
|
|
else if (anlpar & ANLPAR_TX_FD)
|
|
mii->mii_media_active |= IFM_100_TX|IFM_FDX;
|
|
else if (anlpar & ANLPAR_TX)
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
else if (anlpar & ANLPAR_10_FD)
|
|
mii->mii_media_active |= IFM_10_T|IFM_FDX;
|
|
else if (anlpar & ANLPAR_10)
|
|
mii->mii_media_active |= IFM_10_T;
|
|
else
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the other side doesn't support NWAY, then the
|
|
* best we can do is determine if we have a 10Mbps or
|
|
* 100Mbps link. There's no way to know if the link
|
|
* is full or half duplex, so we default to half duplex
|
|
* and hope that the user is clever enough to manually
|
|
* change the media settings if we're wrong.
|
|
*/
|
|
|
|
/*
|
|
* The RealTek PHY supports non-NWAY link speed
|
|
* detection, however it does not report the link
|
|
* detection results via the ANLPAR or BMSR registers.
|
|
* (What? RealTek doesn't do things the way everyone
|
|
* else does? I'm just shocked, shocked I tell you.)
|
|
* To determine the link speed, we have to do one
|
|
* of two things:
|
|
*
|
|
* - If this is a standalone RealTek RTL8201(L) PHY,
|
|
* we can determine the link speed by testing bit 0
|
|
* in the magic, vendor-specific register at offset
|
|
* 0x19.
|
|
*
|
|
* - If this is a RealTek MAC with integrated PHY, we
|
|
* can test the 'SPEED10' bit of the MAC's media status
|
|
* register.
|
|
*/
|
|
if (strcmp("rtk",
|
|
sc->mii_dev.dv_parent->dv_cfdata->cf_name)
|
|
== 0) {
|
|
if (PHY_READ(sc, RTK_MEDIASTAT) & RTK_MEDIASTAT_SPEED10)
|
|
mii->mii_media_active |= IFM_10_T;
|
|
else
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
} else {
|
|
if (PHY_READ(sc, 0x0019) & 0x01)
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
else
|
|
mii->mii_media_active |= IFM_10_T;
|
|
}
|
|
|
|
} else
|
|
mii->mii_media_active = ife->ifm_media;
|
|
}
|