205 lines
6.7 KiB
C
205 lines
6.7 KiB
C
/* $NetBSD: mb86960var.h,v 1.34 2005/01/02 12:41:03 tsutsui Exp $ */
|
|
|
|
/*
|
|
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
|
*
|
|
* This software may be used, modified, copied, distributed, and sold, in
|
|
* both source and binary form provided that the above copyright, these
|
|
* terms and the following disclaimer are retained. The name of the author
|
|
* and/or the contributor may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Portions copyright (C) 1993, David Greenman. This software may be used,
|
|
* modified, copied, distributed, and sold, in both source and binary form
|
|
* provided that the above copyright and these terms are retained. Under no
|
|
* circumstances is the author responsible for the proper functioning of this
|
|
* software, nor does the author assume any responsibility for damages
|
|
* incurred with its use.
|
|
*/
|
|
|
|
/*
|
|
* Device driver for Fujitsu MB86960A/MB86965A based Ethernet cards.
|
|
* Contributed by M.S. <seki@sysrap.cs.fujitsu.co.jp>
|
|
*
|
|
* This version is intended to be a generic template for various
|
|
* MB86960A/MB86965A based Ethernet cards. It currently supports
|
|
* Fujitsu FMV-180 series (i.e., FMV-181 and FMV-182) and Allied-
|
|
* Telesis AT1700 series and RE2000 series. There are some
|
|
* unnecessary hooks embedded, which are primarily intended to support
|
|
* other types of Ethernet cards, but the author is not sure whether
|
|
* they are useful.
|
|
*/
|
|
|
|
#include "rnd.h"
|
|
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
/*
|
|
* Default settings for fe driver specific options.
|
|
* They can be set in config file by "options" statements.
|
|
*/
|
|
|
|
/*
|
|
* Debug control.
|
|
* 0: No debug at all. All debug specific codes are stripped off.
|
|
* 1: Silent. No debug messages are logged except emergent ones.
|
|
* 2: Brief. Lair events and/or important information are logged.
|
|
* 3: Detailed. Logs all information which *may* be useful for debugging.
|
|
* 4: Trace. All actions in the driver is logged. Super verbose.
|
|
*/
|
|
#ifndef FE_DEBUG
|
|
#define FE_DEBUG 1
|
|
#endif
|
|
|
|
/*
|
|
* Delay padding of short transmission packets to minimum Ethernet size.
|
|
* This may or may not gain performance. An EXPERIMENTAL option.
|
|
*/
|
|
#ifndef FE_DELAYED_PADDING
|
|
#define FE_DELAYED_PADDING 0
|
|
#endif
|
|
|
|
/*
|
|
* Transmit just one packet per a "send" command to 86960.
|
|
* This option is intended for performance test. An EXPERIMENTAL option.
|
|
*/
|
|
#ifndef FE_SINGLE_TRANSMISSION
|
|
#define FE_SINGLE_TRANSMISSION 0
|
|
#endif
|
|
|
|
/*
|
|
* Device configuration flags.
|
|
*/
|
|
|
|
/* DLCR6 settings. */
|
|
#define FE_FLAGS_DLCR6_VALUE 0x007F
|
|
|
|
/* Force DLCR6 override. */
|
|
#define FE_FLAGS_OVERRIDE_DLCR6 0x0080
|
|
|
|
/*
|
|
* Supported hardware (Ethernet card) types
|
|
* This information is currently used only for debugging
|
|
*/
|
|
enum fe_type {
|
|
/* For cards which are successfully probed but not identified. */
|
|
FE_TYPE_UNKNOWN = 0,
|
|
|
|
/* Fujitsu FMV-180 series. */
|
|
FE_TYPE_FMV181,
|
|
FE_TYPE_FMV181A,
|
|
FE_TYPE_FMV182,
|
|
FE_TYPE_FMV182A,
|
|
FE_TYPE_FMV183,
|
|
FE_TYPE_FMV184,
|
|
|
|
/* Allied-Telesis AT1700 series and RE2000 series. */
|
|
FE_TYPE_AT1700T,
|
|
FE_TYPE_AT1700BT,
|
|
FE_TYPE_AT1700FT,
|
|
FE_TYPE_AT1700AT,
|
|
FE_TYPE_AT_UNKNOWN,
|
|
|
|
/* PCMCIA by Fujitsu. */
|
|
FE_TYPE_MBH10302,
|
|
FE_TYPE_MBH10304
|
|
};
|
|
|
|
/*
|
|
* fe_softc: per line info and status
|
|
*/
|
|
struct mb86960_softc {
|
|
struct device sc_dev;
|
|
struct ethercom sc_ec; /* ethernet common */
|
|
struct ifmedia sc_media; /* supported media information */
|
|
|
|
bus_space_tag_t sc_bst; /* bus space */
|
|
bus_space_handle_t sc_bsh;
|
|
|
|
/* Set by probe() and not modified in later phases. */
|
|
uint32_t sc_flags; /* controller quirks */
|
|
#define FE_FLAGS_MB86960 0x0001 /* DLCR7 is differnt on MB86960 */
|
|
#define FE_FLAGS_SBW_BYTE 0x0002 /* byte access mode for system bus */
|
|
#define FE_FLAGS_SRAM_150ns 0x0004 /* The board has slow SRAM */
|
|
|
|
uint8_t proto_dlcr4; /* DLCR4 prototype. */
|
|
uint8_t proto_dlcr5; /* DLCR5 prototype. */
|
|
uint8_t proto_dlcr6; /* DLCR6 prototype. */
|
|
uint8_t proto_dlcr7; /* DLCR7 prototype. */
|
|
uint8_t proto_bmpr13; /* BMPR13 prototype. */
|
|
|
|
/* Vendor specific hooks. */
|
|
void (*init_card)(struct mb86960_softc *);
|
|
void (*stop_card)(struct mb86960_softc *);
|
|
|
|
/* Transmission buffer management. */
|
|
int txb_size; /* total bytes in TX buffer */
|
|
int txb_free; /* free bytes in TX buffer */
|
|
int txb_count; /* number of packets in TX buffer */
|
|
int txb_sched; /* number of scheduled packets */
|
|
int txb_padding; /* number of delayed padding bytes */
|
|
|
|
/* Multicast address filter management. */
|
|
int filter_change; /* MARs must be changed ASAP. */
|
|
uint8_t filter[FE_FILTER_LEN]; /* new filter value. */
|
|
|
|
uint8_t sc_enaddr[ETHER_ADDR_LEN];
|
|
|
|
#if NRND > 0
|
|
rndsource_element_t rnd_source;
|
|
#endif
|
|
|
|
uint32_t sc_stat; /* driver status */
|
|
#define FE_STAT_ENABLED 0x0001 /* power enabled on interface */
|
|
#define FE_STAT_ATTACHED 0x0002 /* attach has succeeded */
|
|
|
|
int (*sc_enable)(struct mb86960_softc *);
|
|
void (*sc_disable)(struct mb86960_softc *);
|
|
|
|
int (*sc_mediachange)(struct mb86960_softc *);
|
|
void (*sc_mediastatus)(struct mb86960_softc *, struct ifmediareq *);
|
|
};
|
|
|
|
/*
|
|
* Fe driver specific constants which relate to 86960/86965.
|
|
*/
|
|
|
|
/* Interrupt masks. */
|
|
#define FE_TMASK (FE_D2_COLL16 | FE_D2_TXDONE)
|
|
#define FE_RMASK (FE_D3_OVRFLO | FE_D3_CRCERR | \
|
|
FE_D3_ALGERR | FE_D3_SRTPKT | FE_D3_PKTRDY)
|
|
|
|
/* Maximum number of iterrations for a receive interrupt. */
|
|
#define FE_MAX_RECV_COUNT ((65536 - 2048 * 2) / 64)
|
|
/* Maximum size of SRAM is 65536,
|
|
* minimum size of transmission buffer in fe is 2x2KB,
|
|
* and minimum amount of received packet including headers
|
|
* added by the chip is 64 bytes.
|
|
* Hence FE_MAX_RECV_COUNT is the upper limit for number
|
|
* of packets in the receive buffer. */
|
|
|
|
void mb86960_attach(struct mb86960_softc *, uint8_t *);
|
|
void mb86960_config(struct mb86960_softc *, int *, int, int);
|
|
int mb86960_intr(void *);
|
|
int mb86960_enable(struct mb86960_softc *);
|
|
void mb86960_disable(struct mb86960_softc *);
|
|
int mb86960_activate(struct device *, enum devact);
|
|
int mb86960_detach(struct mb86960_softc *);
|
|
void mb86965_read_eeprom(bus_space_tag_t, bus_space_handle_t, uint8_t *);
|