129 lines
4.8 KiB
C
129 lines
4.8 KiB
C
/* $NetBSD: sl811hsreg.h,v 1.2 2007/08/15 03:53:10 kiyohara Exp $ */
|
|
|
|
/*
|
|
* Not (c) 2007 Matthew Orgass
|
|
* This file is public domain, meaning anyone can make any use of part or all
|
|
* of this file including copying into other works without credit. Any use,
|
|
* modified or not, is solely the responsibility of the user. If this file is
|
|
* part of a collection then use in the collection is governed by the terms of
|
|
* the collection.
|
|
*/
|
|
|
|
/*
|
|
* ScanLogic SL811HS USB Host Controller
|
|
*/
|
|
|
|
/* note: pcmcia attachment uses 4 byte port with data repeated the last three
|
|
* bytes; using 0x2 instead of 0x1 solves bus corruption on the Vadem Clio
|
|
* C-1000. The main driver does not use these IDX and PORT values.
|
|
*/
|
|
#define SL11_IDX_ADDR (0x00)
|
|
#define SL11_IDX_DATA (0x01)
|
|
#define SL11_PORTSTART (0x00)
|
|
#define SL11_PORTSIZE (0x02)
|
|
|
|
#define SL11_E0BASE (0x00) /* Base of Control0 */
|
|
#define SL11_E0CTRL (0x00) /* Host Control Register */
|
|
#define SL11_E0ADDR (0x01) /* Host Base Address */
|
|
#define SL11_E0LEN (0x02) /* Host Base Length */
|
|
#define SL11_E0STAT (0x03) /* USB Status (Read) */
|
|
#define SL11_E0PID SL11_E0STAT /* Host PID, Device Endpoint (Write) */
|
|
#define SL11_E0CONT (0x04) /* Transfer Count (Read) */
|
|
#define SL11_E0DEV SL11_E0CONT /* Host Device Address (Write) */
|
|
|
|
#define SL11_E1BASE (0x08) /* Base of Control1 */
|
|
#define SL11_E1CTRL (SL11_E1BASE + SL11_E0CTRL)
|
|
#define SL11_E1ADDR (SL11_E1BASE + SL11_E0ADDR)
|
|
#define SL11_E1LEN (SL11_E1BASE + SL11_E0LEN)
|
|
#define SL11_E1STAT (SL11_E1BASE + SL11_E0STAT)
|
|
#define SL11_E1PID (SL11_E1BASE + SL11_E0PID)
|
|
#define SL11_E1CONT (SL11_E1BASE + SL11_E0CONT)
|
|
#define SL11_E1DEV (SL11_E1BASE + SL11_E0DEV)
|
|
|
|
#define SL11_CTRL (0x05) /* Control Register1 */
|
|
#define SL11_IER (0x06) /* Interrupt Enable Register */
|
|
#define SL11_ISR (0x0d) /* Interrupt Status Register */
|
|
#define SL11_SOFTIME (0x0e) /* SOF Counter Low (Write) */
|
|
#define SL11_REV SL11_SOFTIME /* HW Revision Register (Read) */
|
|
#define SL811_CSOF (0x0f) /* SOF Counter High(R), Control2(W) */
|
|
#define SL11_MEM (0x10) /* Memory Buffer (0x10 - 0xff) */
|
|
|
|
#define SL11_EPCTRL_ARM (0x01)
|
|
#define SL11_EPCTRL_ENABLE (0x02)
|
|
#define SL11_EPCTRL_ARM_ENABLE (SL11_EPCTRL_ARM|SL11_EPCTRL_ENABLE)
|
|
#define SL11_EPCTRL_DIRECTION (0x04)
|
|
#define SL11_EPCTRL_ISO (0x10)
|
|
#define SL11_EPCTRL_SOF (0x20)
|
|
#define SL11_EPCTRL_DATATOGGLE (0x40)
|
|
#define SL11_EPCTRL_PREAMBLE (0x80)
|
|
|
|
#define SL11_PID_BITS (0xf0)
|
|
#define SL11_EP_BITS (0x0f)
|
|
|
|
#define SL11_PID_OUT (0x10)
|
|
#define SL11_PID_IN (0x90)
|
|
#define SL11_PID_SOF (0x50)
|
|
#define SL11_PID_SETUP (0xd0)
|
|
|
|
#define SLHCI_PID_SWAP_IN_OUT (0x80) /* xor to swap IN and OUT */
|
|
|
|
#define SL11_EPSTAT_ACK (0x01)
|
|
#define SL11_EPSTAT_ERROR (0x02)
|
|
#define SL11_EPSTAT_TIMEOUT (0x04)
|
|
#define SL11_EPSTAT_SEQUENCE (0x08)
|
|
#define SL11_EPSTAT_SETUP (0x10)
|
|
#define SL11_EPSTAT_OVERFLOW (0x20)
|
|
#define SL11_EPSTAT_NAK (0x40)
|
|
#define SL11_EPSTAT_STALL (0x80)
|
|
#define SL11_EPSTAT_STATBITS (0xf7)
|
|
#define SL11_EPSTAT_ERRBITS (0xf6)
|
|
|
|
#define SL11_CTRL_ENABLESOF (0x01)
|
|
/* #define SL11_CTRL_EOF2 (0x04) XXX ? Reserved in 1.5 */
|
|
#define SL11_CTRL_RESETENGINE (0x08)
|
|
#define SL11_CTRL_JKSTATE (0x10)
|
|
#define SL11_CTRL_LOWSPEED (0x20)
|
|
#define SL11_CTRL_SUSPEND (0x40)
|
|
|
|
#define SL11_IER_USBA (0x01) /* USB-A done */
|
|
#define SL11_IER_USBB (0x02) /* USB-B done */
|
|
#define SL11_IER_BABBLE (0x04) /* Babble detection */
|
|
#define SL11_IER_SOF (0x10) /* 1ms Start Of Frame timer */
|
|
#define SL11_IER_INSERT (0x20) /* Slave Insert/Remove detection */
|
|
#define SL11_IER_DEVDET (0x40) /* USB Device Detect */
|
|
#define SL11_IER_RESUME (0x40) /* USB Resume */
|
|
#define SLHCI_NORMAL_INTERRUPTS (0x33) /* A, B, SOFTIMER, INSERT */
|
|
|
|
#define SL11_ISR_USBA (0x01) /* USB-A done */
|
|
#define SL11_ISR_USBB (0x02) /* USB-B done */
|
|
#define SL11_ISR_BABBLE (0x04) /* Babble detection or reserved */
|
|
#define SL11_ISR_RES (0x08) /* Reserved */
|
|
#define SL11_ISR_SOF (0x10) /* 1ms Start Of Frame timer */
|
|
#define SL11_ISR_INSERT (0x20) /* Slave Insert/Remove detection */
|
|
#define SL11_ISR_NODEV (0x40) /* USB Device Not Present */
|
|
#define SL11_ISR_RESUME (0x40) /* USB Resume */
|
|
#define SL11_ISR_DATA (0x80) /* Value of the Data+ pin */
|
|
|
|
#define SL11_REV_USBA (0x01) /* USB-A */
|
|
#define SL11_REV_USBB (0x02) /* USB-B */
|
|
#define SL11_REV_REVMASK (0xf0) /* HW Revision */
|
|
|
|
#define SL11_GET_REV(x) ((x) >> 4)
|
|
#define SLTYPE_SL11H (0x00) /* SL11H not supported */
|
|
#define SLTYPE_SL811HS (0x01)
|
|
#define SLTYPE_SL811HS_R12 SLTYPE_SL811HS
|
|
#define SLTYPE_SL811HS_R14 (0x02)
|
|
#define SLTYPE_SL811HS_R15 SLTYPE_SL811HS_R14
|
|
|
|
#define SLHCI_USBAB (0x03) /* USB A/B bits in IER/ISR/flags */
|
|
|
|
#define SL811_CSOF_SOFMASK (0x3f) /* SOF High Counter */
|
|
#define SL811_CSOF_POLARITY (0x40) /* Change polarity */
|
|
#define SL811_CSOF_MASTER (0x80) /* Master/Slave selection */
|
|
|
|
#define SL11_BUFFER_START (0x10) /* Start of buffer memory */
|
|
#define SL11_BUFFER_END (0xff) /* End of buffer memory */
|
|
|
|
#define SL11_MAX_PACKET_SIZE 240
|
|
|