Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/com.c

2407 lines
56 KiB
C
Raw Blame History

/* com.c,v 1.262.2.3 2008/01/09 01:52:50 matt Exp */
/*-
* Copyright (c) 1998, 1999, 2004, 2008 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)com.c 7.5 (Berkeley) 5/16/91
*/
/*
* COM driver, uses National Semiconductor NS16450/NS16550AF UART
* Supports automatic hardware flow control on StarTech ST16C650A UART
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "com.c,v 1.262.2.3 2008/01/09 01:52:50 matt Exp");
#include "opt_com.h"
#include "opt_ddb.h"
#include "opt_kgdb.h"
#include "opt_lockdebug.h"
#include "opt_multiprocessor.h"
#include "opt_ntp.h"
#include "rnd.h"
#if NRND > 0 && defined(RND_COM)
#include <sys/rnd.h>
#endif
/* The COM16650 option was renamed to COM_16650. */
#ifdef COM16650
#error Obsolete COM16650 option; use COM_16650 instead.
#endif
/*
* Override cnmagic(9) macro before including <sys/systm.h>.
* We need to know if cn_check_magic triggered debugger, so set a flag.
* Callers of cn_check_magic must declare int cn_trapped = 0;
* XXX: this is *ugly*!
*/
#define cn_trap() \
do { \
console_debugger(); \
cn_trapped = 1; \
} while (/* CONSTCOND */ 0)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/select.h>
#include <sys/poll.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/timepps.h>
#include <sys/vnode.h>
#include <sys/kauth.h>
#include <sys/intr.h>
#include <sys/bus.h>
#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>
#include <dev/ic/ns16550reg.h>
#include <dev/ic/st16650reg.h>
#ifdef COM_HAYESP
#include <dev/ic/hayespreg.h>
#endif
#define com_lcr com_cfcr
#include <dev/cons.h>
#ifdef COM_REGMAP
#define CSR_WRITE_1(r, o, v) \
bus_space_write_1((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o], v)
#define CSR_READ_1(r, o) \
bus_space_read_1((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o])
#define CSR_WRITE_2(r, o, v) \
bus_space_write_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o], v)
#define CSR_READ_2(r, o) \
bus_space_read_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o])
#define CSR_WRITE_MULTI(r, o, p, n) \
bus_space_write_multi_1((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o], p, n)
#else
#define CSR_WRITE_1(r, o, v) \
bus_space_write_1((r)->cr_iot, (r)->cr_ioh, o, v)
#define CSR_READ_1(r, o) \
bus_space_read_1((r)->cr_iot, (r)->cr_ioh, o)
#define CSR_WRITE_2(r, o, v) \
bus_space_write_2((r)->cr_iot, (r)->cr_ioh, o, v)
#define CSR_READ_2(r, o) \
bus_space_read_2((r)->cr_iot, (r)->cr_ioh, o)
#define CSR_WRITE_MULTI(r, o, p, n) \
bus_space_write_multi_1((r)->cr_iot, (r)->cr_ioh, o, p, n)
#endif
static void com_enable_debugport(struct com_softc *);
void com_config(struct com_softc *);
void com_shutdown(struct com_softc *);
int comspeed(long, long, int);
static u_char cflag2lcr(tcflag_t);
int comparam(struct tty *, struct termios *);
void comstart(struct tty *);
int comhwiflow(struct tty *, int);
void com_loadchannelregs(struct com_softc *);
void com_hwiflow(struct com_softc *);
void com_break(struct com_softc *, int);
void com_modem(struct com_softc *, int);
void tiocm_to_com(struct com_softc *, u_long, int);
int com_to_tiocm(struct com_softc *);
void com_iflush(struct com_softc *);
int com_common_getc(dev_t, struct com_regs *);
void com_common_putc(dev_t, struct com_regs *, int);
int cominit(struct com_regs *, int, int, int, tcflag_t);
int comcngetc(dev_t);
void comcnputc(dev_t, int);
void comcnpollc(dev_t, int);
#define integrate static inline
void comsoft(void *);
integrate void com_rxsoft(struct com_softc *, struct tty *);
integrate void com_txsoft(struct com_softc *, struct tty *);
integrate void com_stsoft(struct com_softc *, struct tty *);
integrate void com_schedrx(struct com_softc *);
void comdiag(void *);
extern struct cfdriver com_cd;
dev_type_open(comopen);
dev_type_close(comclose);
dev_type_read(comread);
dev_type_write(comwrite);
dev_type_ioctl(comioctl);
dev_type_stop(comstop);
dev_type_tty(comtty);
dev_type_poll(compoll);
const struct cdevsw com_cdevsw = {
comopen, comclose, comread, comwrite, comioctl,
comstop, comtty, compoll, nommap, ttykqfilter, D_TTY
};
/*
* Make this an option variable one can patch.
* But be warned: this must be a power of 2!
*/
u_int com_rbuf_size = COM_RING_SIZE;
/* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */
u_int com_rbuf_hiwat = (COM_RING_SIZE * 1) / 4;
u_int com_rbuf_lowat = (COM_RING_SIZE * 3) / 4;
static struct com_regs comconsregs;
static int comconsattached;
static int comconsrate;
static tcflag_t comconscflag;
static struct cnm_state com_cnm_state;
#ifdef KGDB
#include <sys/kgdb.h>
static struct com_regs comkgdbregs;
static int com_kgdb_attached;
int com_kgdb_getc(void *);
void com_kgdb_putc(void *, int);
#endif /* KGDB */
#ifdef COM_REGMAP
/* initializer for typical 16550-ish hardware */
#define COM_REG_16550 { \
com_data, com_data, com_dlbl, com_dlbh, com_ier, com_iir, com_fifo, \
com_efr, com_lcr, com_mcr, com_lsr, com_msr }
const bus_size_t com_std_map[16] = COM_REG_16550;
#endif /* COM_REGMAP */
#define COMUNIT_MASK 0x7ffff
#define COMDIALOUT_MASK 0x80000
#define COMUNIT(x) (minor(x) & COMUNIT_MASK)
#define COMDIALOUT(x) (minor(x) & COMDIALOUT_MASK)
#define COM_ISALIVE(sc) ((sc)->enabled != 0 && \
device_is_active((sc)->sc_dev))
#define BR BUS_SPACE_BARRIER_READ
#define BW BUS_SPACE_BARRIER_WRITE
#define COM_BARRIER(r, f) \
bus_space_barrier((r)->cr_iot, (r)->cr_ioh, 0, (r)->cr_nports, (f))
/*ARGSUSED*/
int
comspeed(long speed, long frequency, int type)
{
#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */
int x, err;
int divisor = 16;
if ((type == COM_TYPE_OMAP) && (speed > 230400)) {
divisor = 13;
}
#if 0
if (speed == 0)
return (0);
#endif
if (speed <= 0)
return (-1);
x = divrnd(frequency / divisor, speed);
if (x <= 0)
return (-1);
err = divrnd(((quad_t)frequency) * 1000 / divisor, speed * x) - 1000;
if (err < 0)
err = -err;
if (err > COM_TOLERANCE)
return (-1);
return (x);
#undef divrnd
}
#ifdef COM_DEBUG
int com_debug = 0;
void comstatus(struct com_softc *, const char *);
void
comstatus(struct com_softc *sc, const char *str)
{
struct tty *tp = sc->sc_tty;
aprint_normal_dev(sc->sc_dev,
"%s %cclocal %cdcd %cts_carr_on %cdtr %ctx_stopped\n",
str,
ISSET(tp->t_cflag, CLOCAL) ? '+' : '-',
ISSET(sc->sc_msr, MSR_DCD) ? '+' : '-',
ISSET(tp->t_state, TS_CARR_ON) ? '+' : '-',
ISSET(sc->sc_mcr, MCR_DTR) ? '+' : '-',
sc->sc_tx_stopped ? '+' : '-');
aprint_normal_dev(sc->sc_dev,
"%s %ccrtscts %ccts %cts_ttstop %crts rx_flags=0x%x\n",
str,
ISSET(tp->t_cflag, CRTSCTS) ? '+' : '-',
ISSET(sc->sc_msr, MSR_CTS) ? '+' : '-',
ISSET(tp->t_state, TS_TTSTOP) ? '+' : '-',
ISSET(sc->sc_mcr, MCR_RTS) ? '+' : '-',
sc->sc_rx_flags);
}
#endif
int
com_probe_subr(struct com_regs *regs)
{
/* force access to id reg */
CSR_WRITE_1(regs, COM_REG_LCR, LCR_8BITS);
CSR_WRITE_1(regs, COM_REG_IIR, 0);
if ((CSR_READ_1(regs, COM_REG_LCR) != LCR_8BITS) ||
(CSR_READ_1(regs, COM_REG_IIR) & 0x38))
return (0);
return (1);
}
int
comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh)
{
struct com_regs regs;
regs.cr_iot = iot;
regs.cr_ioh = ioh;
#ifdef COM_REGMAP
memcpy(regs.cr_map, com_std_map, sizeof (regs.cr_map));;
#endif
return com_probe_subr(&regs);
}
/*
* No locking in this routine; it is only called during attach,
* or with the port already locked.
*/
static void
com_enable_debugport(struct com_softc *sc)
{
/* Turn on line break interrupt, set carrier. */
sc->sc_ier = IER_ERXRDY;
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier |= IER_EUART | IER_ERXTOUT;
CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier);
SET(sc->sc_mcr, MCR_DTR | MCR_RTS);
CSR_WRITE_1(&sc->sc_regs, COM_REG_MCR, sc->sc_mcr);
}
void
com_attach_subr(struct com_softc *sc)
{
struct com_regs *regsp = &sc->sc_regs;
struct tty *tp;
#ifdef COM_16650
u_int8_t lcr;
#endif
const char *fifo_msg = NULL;
aprint_naive("\n");
callout_init(&sc->sc_diag_callout, 0);
mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_HIGH);
/* Disable interrupts before configuring the device. */
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier = IER_EUART;
else
sc->sc_ier = 0;
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
if (regsp->cr_iot == comconsregs.cr_iot &&
regsp->cr_iobase == comconsregs.cr_iobase) {
comconsattached = 1;
/* Make sure the console is always "hardwired". */
delay(10000); /* wait for output to finish */
SET(sc->sc_hwflags, COM_HW_CONSOLE);
SET(sc->sc_swflags, TIOCFLAG_SOFTCAR);
}
/* Probe for FIFO */
switch (sc->sc_type) {
case COM_TYPE_HAYESP:
goto fifodone;
case COM_TYPE_AU1x00:
sc->sc_fifolen = 16;
fifo_msg = "Au1X00 UART, working fifo";
SET(sc->sc_hwflags, COM_HW_FIFO);
goto fifodelay;
case COM_TYPE_OMAP:
sc->sc_fifolen = 64;
fifo_msg = "OMAP UART, working fifo";
SET(sc->sc_hwflags, COM_HW_FIFO);
goto fifodelay;
}
sc->sc_fifolen = 1;
/* look for a NS 16550AF UART with FIFOs */
CSR_WRITE_1(regsp, COM_REG_FIFO,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14);
delay(100);
if (ISSET(CSR_READ_1(regsp, COM_REG_IIR), IIR_FIFO_MASK)
== IIR_FIFO_MASK)
if (ISSET(CSR_READ_1(regsp, COM_REG_FIFO), FIFO_TRIGGER_14)
== FIFO_TRIGGER_14) {
SET(sc->sc_hwflags, COM_HW_FIFO);
#ifdef COM_16650
/*
* IIR changes into the EFR if LCR is set to LCR_EERS
* on 16650s. We also know IIR != 0 at this point.
* Write 0 into the EFR, and read it. If the result
* is 0, we have a 16650.
*
* Older 16650s were broken; the test to detect them
* is taken from the Linux driver. Apparently
* setting DLAB enable gives access to the EFR on
* these chips.
*/
if (type != COM_TYPE_16550_NOERS) {
lcr = CSR_READ_1(regsp, COM_REG_LCR);
CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS);
CSR_WRITE_1(regsp, COM_REG_EFR, 0);
if (CSR_READ_1(regsp, COM_REG_EFR) == 0) {
CSR_WRITE_1(regsp, COM_REG_LCR,
lcr | LCR_DLAB);
CLR(sc->sc_hwflags, COM_HW_FIFO);
sc->sc_fifolen = 0;
} else {
SET(sc->sc_hwflags, COM_HW_FLOW);
sc->sc_fifolen = 32;
}
CSR_WRITE_1(regsp, COM_REG_LCR, lcr);
} else
#endif
sc->sc_fifolen = 16;
#ifdef COM_16650
if (sc->sc_fifolen == 0)
fifo_msg = "st16650, broken fifo";
else if (sc->sc_fifolen == 32)
fifo_msg = "st16650a, working fifo";
else
#endif
fifo_msg = "ns16550a, working fifo";
} else
fifo_msg = "ns16550, broken fifo";
else
fifo_msg = "ns8250 or ns16450, no fifo";
CSR_WRITE_1(regsp, COM_REG_FIFO, 0);
fifodelay:
/*
* Some chips will clear down both Tx and Rx FIFOs when zero is
* written to com_fifo. If this chip is the console, writing zero
* results in some of the chip/FIFO description being lost, so delay
* printing it until now.
*/
delay(10);
aprint_normal(": %s\n", fifo_msg);
if (ISSET(sc->sc_hwflags, COM_HW_TXFIFO_DISABLE)) {
sc->sc_fifolen = 1;
aprint_normal_dev(sc->sc_dev, "txfifo disabled\n");
}
fifodone:
tp = ttymalloc();
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_hwiflow = comhwiflow;
sc->sc_tty = tp;
sc->sc_rbuf = malloc(com_rbuf_size << 1, M_DEVBUF, M_NOWAIT);
sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf;
sc->sc_rbavail = com_rbuf_size;
if (sc->sc_rbuf == NULL) {
aprint_error_dev(sc->sc_dev,
"unable to allocate ring buffer\n");
return;
}
sc->sc_ebuf = sc->sc_rbuf + (com_rbuf_size << 1);
tty_attach(tp);
if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN))
SET(sc->sc_mcr, MCR_IENABLE);
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
int maj;
/* locate the major number */
maj = cdevsw_lookup_major(&com_cdevsw);
tp->t_dev = cn_tab->cn_dev = makedev(maj,
device_unit(sc->sc_dev));
aprint_normal_dev(sc->sc_dev, "console\n");
}
#ifdef KGDB
/*
* Allow kgdb to "take over" this port. If this is
* not the console and is the kgdb device, it has
* exclusive use. If it's the console _and_ the
* kgdb device, it doesn't.
*/
if (regsp->cr_iot == comkgdbregs.cr_iot &&
regsp->cr_iobase == comkgdbregs.cr_iobase) {
if (!ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
com_kgdb_attached = 1;
SET(sc->sc_hwflags, COM_HW_KGDB);
}
aprint_normal_dev(sc->sc_dev, "kgdb\n");
}
#endif
sc->sc_si = softint_establish(SOFTINT_SERIAL, comsoft, sc);
#if NRND > 0 && defined(RND_COM)
rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev),
RND_TYPE_TTY, 0);
#endif
/* if there are no enable/disable functions, assume the device
is always enabled */
if (!sc->enable)
sc->enabled = 1;
com_config(sc);
SET(sc->sc_hwflags, COM_HW_DEV_OK);
}
void
com_config(struct com_softc *sc)
{
struct com_regs *regsp = &sc->sc_regs;
/* Disable interrupts before configuring the device. */
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier = IER_EUART;
else
sc->sc_ier = 0;
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
(void) CSR_READ_1(regsp, COM_REG_IIR);
#ifdef COM_HAYESP
/* Look for a Hayes ESP board. */
if (sc->sc_type == COM_TYPE_HAYESP) {
/* Set 16550 compatibility mode */
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1,
HAYESP_SETMODE);
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_MODE_FIFO|HAYESP_MODE_RTS|
HAYESP_MODE_SCALE);
/* Set RTS/CTS flow control */
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1,
HAYESP_SETFLOWTYPE);
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_FLOW_RTS);
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_FLOW_CTS);
/* Set flow control levels */
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1,
HAYESP_SETRXFLOW);
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_HIBYTE(HAYESP_RXHIWMARK));
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_LOBYTE(HAYESP_RXHIWMARK));
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_HIBYTE(HAYESP_RXLOWMARK));
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
HAYESP_LOBYTE(HAYESP_RXLOWMARK));
}
#endif
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB))
com_enable_debugport(sc);
}
int
com_detach(device_t self, int flags)
{
struct com_softc *sc = device_private(self);
int maj, mn;
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
return EBUSY;
/* locate the major number */
maj = cdevsw_lookup_major(&com_cdevsw);
/* Nuke the vnodes for any open instances. */
mn = device_unit(self);
vdevgone(maj, mn, mn, VCHR);
mn |= COMDIALOUT_MASK;
vdevgone(maj, mn, mn, VCHR);
if (sc->sc_rbuf == NULL) {
/*
* Ring buffer allocation failed in the com_attach_subr,
* only the tty is allocated, and nothing else.
*/
ttyfree(sc->sc_tty);
return 0;
}
/* Free the receive buffer. */
free(sc->sc_rbuf, M_DEVBUF);
/* Detach and free the tty. */
tty_detach(sc->sc_tty);
ttyfree(sc->sc_tty);
/* Unhook the soft interrupt handler. */
softint_disestablish(sc->sc_si);
#if NRND > 0 && defined(RND_COM)
/* Unhook the entropy source. */
rnd_detach_source(&sc->rnd_source);
#endif
callout_destroy(&sc->sc_diag_callout);
/* Destroy the lock. */
mutex_destroy(&sc->sc_lock);
return (0);
}
int
com_activate(device_t self, enum devact act)
{
struct com_softc *sc = device_private(self);
int rv = 0;
switch (act) {
case DVACT_ACTIVATE:
rv = EOPNOTSUPP;
break;
case DVACT_DEACTIVATE:
if (sc->sc_hwflags & (COM_HW_CONSOLE|COM_HW_KGDB)) {
rv = EBUSY;
break;
}
if (sc->disable != NULL && sc->enabled != 0) {
(*sc->disable)(sc);
sc->enabled = 0;
}
break;
}
return (rv);
}
void
com_shutdown(struct com_softc *sc)
{
struct tty *tp = sc->sc_tty;
mutex_spin_enter(&sc->sc_lock);
/* If we were asserting flow control, then deassert it. */
SET(sc->sc_rx_flags, RX_IBUF_BLOCKED);
com_hwiflow(sc);
/* Clear any break condition set with TIOCSBRK. */
com_break(sc, 0);
/*
* Hang up if necessary. Wait a bit, so the other side has time to
* notice even if we immediately open the port again.
* Avoid tsleeping above splhigh().
*/
if (ISSET(tp->t_cflag, HUPCL)) {
com_modem(sc, 0);
mutex_spin_exit(&sc->sc_lock);
/* XXX will only timeout */
(void) kpause(ttclos, false, hz, NULL);
mutex_spin_enter(&sc->sc_lock);
}
/* Turn off interrupts. */
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
sc->sc_ier = IER_ERXRDY; /* interrupt on break */
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier |= IER_ERXTOUT;
} else
sc->sc_ier = 0;
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier |= IER_EUART;
CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier);
mutex_spin_exit(&sc->sc_lock);
if (sc->disable) {
#ifdef DIAGNOSTIC
if (!sc->enabled)
panic("com_shutdown: not enabled?");
#endif
(*sc->disable)(sc);
sc->enabled = 0;
}
}
int
comopen(dev_t dev, int flag, int mode, struct lwp *l)
{
struct com_softc *sc;
struct tty *tp;
int s;
int error;
sc = device_lookup_private(&com_cd, COMUNIT(dev));
if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK) ||
sc->sc_rbuf == NULL)
return (ENXIO);
if (!device_is_active(sc->sc_dev))
return (ENXIO);
#ifdef KGDB
/*
* If this is the kgdb port, no other use is permitted.
*/
if (ISSET(sc->sc_hwflags, COM_HW_KGDB))
return (EBUSY);
#endif
tp = sc->sc_tty;
if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
return (EBUSY);
s = spltty();
/*
* Do the following iff this is a first open.
*/
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
struct termios t;
tp->t_dev = dev;
if (sc->enable) {
if ((*sc->enable)(sc)) {
splx(s);
aprint_error_dev(sc->sc_dev,
"device enable failed\n");
return (EIO);
}
mutex_spin_enter(&sc->sc_lock);
sc->enabled = 1;
com_config(sc);
} else {
mutex_spin_enter(&sc->sc_lock);
}
/* Turn on interrupts. */
sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC;
if (sc->sc_type == COM_TYPE_PXA2x0)
sc->sc_ier |= IER_EUART | IER_ERXTOUT;
CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier);
/* Fetch the current modem control status, needed later. */
sc->sc_msr = CSR_READ_1(&sc->sc_regs, COM_REG_MSR);
/* Clear PPS capture state on first open. */
mutex_spin_enter(&timecounter_lock);
memset(&sc->sc_pps_state, 0, sizeof(sc->sc_pps_state));
sc->sc_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
pps_init(&sc->sc_pps_state);
mutex_spin_exit(&timecounter_lock);
mutex_spin_exit(&sc->sc_lock);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
t.c_ospeed = comconsrate;
t.c_cflag = comconscflag;
} else {
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
}
t.c_ispeed = t.c_ospeed;
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
SET(t.c_cflag, MDMBUF);
/* Make sure comparam() will do something. */
tp->t_ospeed = 0;
(void) comparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
mutex_spin_enter(&sc->sc_lock);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
com_modem(sc, 1);
/* Clear the input ring, and unblock. */
sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf;
sc->sc_rbavail = com_rbuf_size;
com_iflush(sc);
CLR(sc->sc_rx_flags, RX_ANY_BLOCK);
com_hwiflow(sc);
#ifdef COM_DEBUG
if (com_debug)
comstatus(sc, "comopen ");
#endif
mutex_spin_exit(&sc->sc_lock);
}
splx(s);
error = ttyopen(tp, COMDIALOUT(dev), ISSET(flag, O_NONBLOCK));
if (error)
goto bad;
error = (*tp->t_linesw->l_open)(dev, tp);
if (error)
goto bad;
return (0);
bad:
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
com_shutdown(sc);
}
return (error);
}
int
comclose(dev_t dev, int flag, int mode, struct lwp *l)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(dev));
struct tty *tp = sc->sc_tty;
/* XXX This is for cons.c. */
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
(*tp->t_linesw->l_close)(tp, flag);
ttyclose(tp);
if (COM_ISALIVE(sc) == 0)
return (0);
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
com_shutdown(sc);
}
return (0);
}
int
comread(dev_t dev, struct uio *uio, int flag)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(dev));
struct tty *tp = sc->sc_tty;
if (COM_ISALIVE(sc) == 0)
return (EIO);
return ((*tp->t_linesw->l_read)(tp, uio, flag));
}
int
comwrite(dev_t dev, struct uio *uio, int flag)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(dev));
struct tty *tp = sc->sc_tty;
if (COM_ISALIVE(sc) == 0)
return (EIO);
return ((*tp->t_linesw->l_write)(tp, uio, flag));
}
int
compoll(dev_t dev, int events, struct lwp *l)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(dev));
struct tty *tp = sc->sc_tty;
if (COM_ISALIVE(sc) == 0)
return (POLLHUP);
return ((*tp->t_linesw->l_poll)(tp, events, l));
}
struct tty *
comtty(dev_t dev)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(dev));
struct tty *tp = sc->sc_tty;
return (tp);
}
int
comioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
{
struct com_softc *sc;
struct tty *tp;
int error;
sc = device_lookup_private(&com_cd, COMUNIT(dev));
if (sc == NULL)
return ENXIO;
if (COM_ISALIVE(sc) == 0)
return (EIO);
tp = sc->sc_tty;
error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return (error);
error = ttioctl(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return (error);
error = 0;
switch (cmd) {
case TIOCSFLAGS:
error = kauth_authorize_device_tty(l->l_cred,
KAUTH_DEVICE_TTY_PRIVSET, tp);
break;
default:
/* nothing */
break;
}
if (error) {
return error;
}
mutex_spin_enter(&sc->sc_lock);
switch (cmd) {
case TIOCSBRK:
com_break(sc, 1);
break;
case TIOCCBRK:
com_break(sc, 0);
break;
case TIOCSDTR:
com_modem(sc, 1);
break;
case TIOCCDTR:
com_modem(sc, 0);
break;
case TIOCGFLAGS:
*(int *)data = sc->sc_swflags;
break;
case TIOCSFLAGS:
sc->sc_swflags = *(int *)data;
break;
case TIOCMSET:
case TIOCMBIS:
case TIOCMBIC:
tiocm_to_com(sc, cmd, *(int *)data);
break;
case TIOCMGET:
*(int *)data = com_to_tiocm(sc);
break;
case PPS_IOC_CREATE:
case PPS_IOC_DESTROY:
case PPS_IOC_GETPARAMS:
case PPS_IOC_SETPARAMS:
case PPS_IOC_GETCAP:
case PPS_IOC_FETCH:
#ifdef PPS_SYNC
case PPS_IOC_KCBIND:
#endif
mutex_spin_enter(&timecounter_lock);
error = pps_ioctl(cmd, data, &sc->sc_pps_state);
mutex_spin_exit(&timecounter_lock);
break;
case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */
mutex_spin_enter(&timecounter_lock);
#ifndef PPS_TRAILING_EDGE
TIMESPEC_TO_TIMEVAL((struct timeval *)data,
&sc->sc_pps_state.ppsinfo.assert_timestamp);
#else
TIMESPEC_TO_TIMEVAL((struct timeval *)data,
&sc->sc_pps_state.ppsinfo.clear_timestamp);
#endif
mutex_spin_exit(&timecounter_lock);
break;
default:
error = EPASSTHROUGH;
break;
}
mutex_spin_exit(&sc->sc_lock);
#ifdef COM_DEBUG
if (com_debug)
comstatus(sc, "comioctl ");
#endif
return (error);
}
integrate void
com_schedrx(struct com_softc *sc)
{
sc->sc_rx_ready = 1;
/* Wake up the poller. */
softint_schedule(sc->sc_si);
}
void
com_break(struct com_softc *sc, int onoff)
{
if (onoff)
SET(sc->sc_lcr, LCR_SBREAK);
else
CLR(sc->sc_lcr, LCR_SBREAK);
if (!sc->sc_heldchange) {
if (sc->sc_tx_busy) {
sc->sc_heldtbc = sc->sc_tbc;
sc->sc_tbc = 0;
sc->sc_heldchange = 1;
} else
com_loadchannelregs(sc);
}
}
void
com_modem(struct com_softc *sc, int onoff)
{
if (sc->sc_mcr_dtr == 0)
return;
if (onoff)
SET(sc->sc_mcr, sc->sc_mcr_dtr);
else
CLR(sc->sc_mcr, sc->sc_mcr_dtr);
if (!sc->sc_heldchange) {
if (sc->sc_tx_busy) {
sc->sc_heldtbc = sc->sc_tbc;
sc->sc_tbc = 0;
sc->sc_heldchange = 1;
} else
com_loadchannelregs(sc);
}
}
void
tiocm_to_com(struct com_softc *sc, u_long how, int ttybits)
{
u_char combits;
combits = 0;
if (ISSET(ttybits, TIOCM_DTR))
SET(combits, MCR_DTR);
if (ISSET(ttybits, TIOCM_RTS))
SET(combits, MCR_RTS);
switch (how) {
case TIOCMBIC:
CLR(sc->sc_mcr, combits);
break;
case TIOCMBIS:
SET(sc->sc_mcr, combits);
break;
case TIOCMSET:
CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
SET(sc->sc_mcr, combits);
break;
}
if (!sc->sc_heldchange) {
if (sc->sc_tx_busy) {
sc->sc_heldtbc = sc->sc_tbc;
sc->sc_tbc = 0;
sc->sc_heldchange = 1;
} else
com_loadchannelregs(sc);
}
}
int
com_to_tiocm(struct com_softc *sc)
{
u_char combits;
int ttybits = 0;
combits = sc->sc_mcr;
if (ISSET(combits, MCR_DTR))
SET(ttybits, TIOCM_DTR);
if (ISSET(combits, MCR_RTS))
SET(ttybits, TIOCM_RTS);
combits = sc->sc_msr;
if (ISSET(combits, MSR_DCD))
SET(ttybits, TIOCM_CD);
if (ISSET(combits, MSR_CTS))
SET(ttybits, TIOCM_CTS);
if (ISSET(combits, MSR_DSR))
SET(ttybits, TIOCM_DSR);
if (ISSET(combits, MSR_RI | MSR_TERI))
SET(ttybits, TIOCM_RI);
if (ISSET(sc->sc_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS | IER_EMSC))
SET(ttybits, TIOCM_LE);
return (ttybits);
}
static u_char
cflag2lcr(tcflag_t cflag)
{
u_char lcr = 0;
switch (ISSET(cflag, CSIZE)) {
case CS5:
SET(lcr, LCR_5BITS);
break;
case CS6:
SET(lcr, LCR_6BITS);
break;
case CS7:
SET(lcr, LCR_7BITS);
break;
case CS8:
SET(lcr, LCR_8BITS);
break;
}
if (ISSET(cflag, PARENB)) {
SET(lcr, LCR_PENAB);
if (!ISSET(cflag, PARODD))
SET(lcr, LCR_PEVEN);
}
if (ISSET(cflag, CSTOPB))
SET(lcr, LCR_STOPB);
return (lcr);
}
int
comparam(struct tty *tp, struct termios *t)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(tp->t_dev));
int ospeed;
u_char lcr;
if (COM_ISALIVE(sc) == 0)
return (EIO);
#ifdef COM_HAYESP
if (sc->sc_type == COM_TYPE_HAYESP) {
int prescaler, speed;
/*
* Calculate UART clock prescaler. It should be in
* range of 0 .. 3.
*/
for (prescaler = 0, speed = t->c_ospeed; prescaler < 4;
prescaler++, speed /= 2)
if ((ospeed = comspeed(speed, sc->sc_frequency,
sc->sc_type)) > 0)
break;
if (prescaler == 4)
return (EINVAL);
sc->sc_prescaler = prescaler;
} else
#endif
ospeed = comspeed(t->c_ospeed, sc->sc_frequency, sc->sc_type);
/* Check requested parameters. */
if (ospeed < 0)
return (EINVAL);
if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
return (EINVAL);
/*
* For the console, always force CLOCAL and !HUPCL, so that the port
* is always active.
*/
if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) ||
ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
SET(t->c_cflag, CLOCAL);
CLR(t->c_cflag, HUPCL);
}
/*
* If there were no changes, don't do anything. This avoids dropping
* input and improves performance when all we did was frob things like
* VMIN and VTIME.
*/
if (tp->t_ospeed == t->c_ospeed &&
tp->t_cflag == t->c_cflag)
return (0);
lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag);
mutex_spin_enter(&sc->sc_lock);
sc->sc_lcr = lcr;
/*
* If we're not in a mode that assumes a connection is present, then
* ignore carrier changes.
*/
if (ISSET(t->c_cflag, CLOCAL | MDMBUF))
sc->sc_msr_dcd = 0;
else
sc->sc_msr_dcd = MSR_DCD;
/*
* Set the flow control pins depending on the current flow control
* mode.
*/
if (ISSET(t->c_cflag, CRTSCTS)) {
sc->sc_mcr_dtr = MCR_DTR;
sc->sc_mcr_rts = MCR_RTS;
sc->sc_msr_cts = MSR_CTS;
sc->sc_efr = EFR_AUTORTS | EFR_AUTOCTS;
} else if (ISSET(t->c_cflag, MDMBUF)) {
/*
* For DTR/DCD flow control, make sure we don't toggle DTR for
* carrier detection.
*/
sc->sc_mcr_dtr = 0;
sc->sc_mcr_rts = MCR_DTR;
sc->sc_msr_cts = MSR_DCD;
sc->sc_efr = 0;
} else {
/*
* If no flow control, then always set RTS. This will make
* the other side happy if it mistakenly thinks we're doing
* RTS/CTS flow control.
*/
sc->sc_mcr_dtr = MCR_DTR | MCR_RTS;
sc->sc_mcr_rts = 0;
sc->sc_msr_cts = 0;
sc->sc_efr = 0;
if (ISSET(sc->sc_mcr, MCR_DTR))
SET(sc->sc_mcr, MCR_RTS);
else
CLR(sc->sc_mcr, MCR_RTS);
}
sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd;
#if 0
if (ospeed == 0)
CLR(sc->sc_mcr, sc->sc_mcr_dtr);
else
SET(sc->sc_mcr, sc->sc_mcr_dtr);
#endif
sc->sc_dlbl = ospeed;
sc->sc_dlbh = ospeed >> 8;
/*
* Set the FIFO threshold based on the receive speed.
*
* * If it's a low speed, it's probably a mouse or some other
* interactive device, so set the threshold low.
* * If it's a high speed, trim the trigger level down to prevent
* overflows.
* * Otherwise set it a bit higher.
*/
if (sc->sc_type == COM_TYPE_HAYESP)
sc->sc_fifo = FIFO_DMA_MODE | FIFO_ENABLE | FIFO_TRIGGER_8;
else if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
if (t->c_ospeed <= 1200)
sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_1;
else if (t->c_ospeed <= 38400)
sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_8;
else
sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_4;
} else
sc->sc_fifo = 0;
/* And copy to tty. */
tp->t_ispeed = t->c_ospeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
if (!sc->sc_heldchange) {
if (sc->sc_tx_busy) {
sc->sc_heldtbc = sc->sc_tbc;
sc->sc_tbc = 0;
sc->sc_heldchange = 1;
} else
com_loadchannelregs(sc);
}
if (!ISSET(t->c_cflag, CHWFLOW)) {
/* Disable the high water mark. */
sc->sc_r_hiwat = 0;
sc->sc_r_lowat = 0;
if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) {
CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED);
com_schedrx(sc);
}
if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) {
CLR(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED);
com_hwiflow(sc);
}
} else {
sc->sc_r_hiwat = com_rbuf_hiwat;
sc->sc_r_lowat = com_rbuf_lowat;
}
mutex_spin_exit(&sc->sc_lock);
/*
* Update the tty layer's idea of the carrier bit, in case we changed
* CLOCAL or MDMBUF. We don't hang up here; we only do that by
* explicit request.
*/
(void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, MSR_DCD));
#ifdef COM_DEBUG
if (com_debug)
comstatus(sc, "comparam ");
#endif
if (!ISSET(t->c_cflag, CHWFLOW)) {
if (sc->sc_tx_stopped) {
sc->sc_tx_stopped = 0;
comstart(tp);
}
}
return (0);
}
void
com_iflush(struct com_softc *sc)
{
struct com_regs *regsp = &sc->sc_regs;
#ifdef DIAGNOSTIC
int reg;
#endif
int timo;
#ifdef DIAGNOSTIC
reg = 0xffff;
#endif
timo = 50000;
/* flush any pending I/O */
while (ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)
&& --timo)
#ifdef DIAGNOSTIC
reg =
#else
(void)
#endif
CSR_READ_1(regsp, COM_REG_RXDATA);
#ifdef DIAGNOSTIC
if (!timo)
aprint_error_dev(sc->sc_dev, "com_iflush timeout %02x\n", reg);
#endif
}
void
com_loadchannelregs(struct com_softc *sc)
{
struct com_regs *regsp = &sc->sc_regs;
/* XXXXX necessary? */
com_iflush(sc);
if (sc->sc_type == COM_TYPE_PXA2x0)
CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART);
else
CSR_WRITE_1(regsp, COM_REG_IER, 0);
if (sc->sc_type == COM_TYPE_OMAP) {
/* disable before changing settings */
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE);
}
if (ISSET(sc->sc_hwflags, COM_HW_FLOW)) {
if (sc->sc_type != COM_TYPE_AU1x00
&& sc->sc_type != COM_TYPE_16550_NOERS) {
/* no EFR on alchemy */
CSR_WRITE_1(regsp, COM_REG_EFR, sc->sc_efr);
CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS);
}
}
if (sc->sc_type == COM_TYPE_AU1x00) {
/* alchemy has single separate 16-bit clock divisor register */
CSR_WRITE_2(regsp, COM_REG_DLBL, sc->sc_dlbl +
(sc->sc_dlbh << 8));
} else {
CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB);
CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl);
CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh);
}
CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr);
CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active = sc->sc_mcr);
CSR_WRITE_1(regsp, COM_REG_FIFO, sc->sc_fifo);
#ifdef COM_HAYESP
if (sc->sc_type == COM_TYPE_HAYESP) {
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1,
HAYESP_SETPRESCALER);
bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2,
sc->sc_prescaler);
}
#endif
if (sc->sc_type == COM_TYPE_OMAP) {
/* setup the fifos. the FCR value is not used as long
as SCR[6] and SCR[7] are 0, which they are at reset
and we never touch the SCR register */
uint8_t rx_fifo_trig = 40;
uint8_t tx_fifo_trig = 60;
uint8_t rx_start = 8;
uint8_t rx_halt = 60;
uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2);
uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2);
/* enable access to TCR & TLR */
CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr | MCR_TCR_TLR);
/* write tcr and tlr values */
CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value);
CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value);
/* disable access to TCR & TLR */
CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr);
/* enable again, but mode is based on speed */
if (sc->sc_tty->t_termios.c_ospeed > 230400) {
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X);
} else {
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X);
}
}
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
}
int
comhwiflow(struct tty *tp, int block)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(tp->t_dev));
if (COM_ISALIVE(sc) == 0)
return (0);
if (sc->sc_mcr_rts == 0)
return (0);
mutex_spin_enter(&sc->sc_lock);
if (block) {
if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) {
SET(sc->sc_rx_flags, RX_TTY_BLOCKED);
com_hwiflow(sc);
}
} else {
if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) {
CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED);
com_schedrx(sc);
}
if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) {
CLR(sc->sc_rx_flags, RX_TTY_BLOCKED);
com_hwiflow(sc);
}
}
mutex_spin_exit(&sc->sc_lock);
return (1);
}
/*
* (un)block input via hw flowcontrol
*/
void
com_hwiflow(struct com_softc *sc)
{
struct com_regs *regsp= &sc->sc_regs;
if (sc->sc_mcr_rts == 0)
return;
if (ISSET(sc->sc_rx_flags, RX_ANY_BLOCK)) {
CLR(sc->sc_mcr, sc->sc_mcr_rts);
CLR(sc->sc_mcr_active, sc->sc_mcr_rts);
} else {
SET(sc->sc_mcr, sc->sc_mcr_rts);
SET(sc->sc_mcr_active, sc->sc_mcr_rts);
}
CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active);
}
void
comstart(struct tty *tp)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(tp->t_dev));
struct com_regs *regsp = &sc->sc_regs;
int s;
if (COM_ISALIVE(sc) == 0)
return;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
goto out;
if (sc->sc_tx_stopped)
goto out;
if (!ttypull(tp))
goto out;
/* Grab the first contiguous region of buffer space. */
{
u_char *tba;
int tbc;
tba = tp->t_outq.c_cf;
tbc = ndqb(&tp->t_outq, 0);
mutex_spin_enter(&sc->sc_lock);
sc->sc_tba = tba;
sc->sc_tbc = tbc;
}
SET(tp->t_state, TS_BUSY);
sc->sc_tx_busy = 1;
/* Enable transmit completion interrupts if necessary. */
if (!ISSET(sc->sc_ier, IER_ETXRDY)) {
SET(sc->sc_ier, IER_ETXRDY);
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
}
/* Output the first chunk of the contiguous buffer. */
if (!ISSET(sc->sc_hwflags, COM_HW_NO_TXPRELOAD)) {
u_int n;
n = sc->sc_tbc;
if (n > sc->sc_fifolen)
n = sc->sc_fifolen;
CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n);
sc->sc_tbc -= n;
sc->sc_tba += n;
}
mutex_spin_exit(&sc->sc_lock);
out:
splx(s);
return;
}
/*
* Stop output on a line.
*/
void
comstop(struct tty *tp, int flag)
{
struct com_softc *sc =
device_lookup_private(&com_cd, COMUNIT(tp->t_dev));
mutex_spin_enter(&sc->sc_lock);
if (ISSET(tp->t_state, TS_BUSY)) {
/* Stop transmitting at the next chunk. */
sc->sc_tbc = 0;
sc->sc_heldtbc = 0;
if (!ISSET(tp->t_state, TS_TTSTOP))
SET(tp->t_state, TS_FLUSH);
}
mutex_spin_exit(&sc->sc_lock);
}
void
comdiag(void *arg)
{
struct com_softc *sc = arg;
int overflows, floods;
mutex_spin_enter(&sc->sc_lock);
overflows = sc->sc_overflows;
sc->sc_overflows = 0;
floods = sc->sc_floods;
sc->sc_floods = 0;
sc->sc_errors = 0;
mutex_spin_exit(&sc->sc_lock);
log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n",
device_xname(sc->sc_dev),
overflows, overflows == 1 ? "" : "s",
floods, floods == 1 ? "" : "s");
}
integrate void
com_rxsoft(struct com_softc *sc, struct tty *tp)
{
int (*rint)(int, struct tty *) = tp->t_linesw->l_rint;
u_char *get, *end;
u_int cc, scc;
u_char lsr;
int code;
end = sc->sc_ebuf;
get = sc->sc_rbget;
scc = cc = com_rbuf_size - sc->sc_rbavail;
if (cc == com_rbuf_size) {
sc->sc_floods++;
if (sc->sc_errors++ == 0)
callout_reset(&sc->sc_diag_callout, 60 * hz,
comdiag, sc);
}
/* If not yet open, drop the entire buffer content here */
if (!ISSET(tp->t_state, TS_ISOPEN)) {
get += cc << 1;
if (get >= end)
get -= com_rbuf_size << 1;
cc = 0;
}
while (cc) {
code = get[0];
lsr = get[1];
if (ISSET(lsr, LSR_OE | LSR_BI | LSR_FE | LSR_PE)) {
if (ISSET(lsr, LSR_OE)) {
sc->sc_overflows++;
if (sc->sc_errors++ == 0)
callout_reset(&sc->sc_diag_callout,
60 * hz, comdiag, sc);
}
if (ISSET(lsr, LSR_BI | LSR_FE))
SET(code, TTY_FE);
if (ISSET(lsr, LSR_PE))
SET(code, TTY_PE);
}
if ((*rint)(code, tp) == -1) {
/*
* The line discipline's buffer is out of space.
*/
if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) {
/*
* We're either not using flow control, or the
* line discipline didn't tell us to block for
* some reason. Either way, we have no way to
* know when there's more space available, so
* just drop the rest of the data.
*/
get += cc << 1;
if (get >= end)
get -= com_rbuf_size << 1;
cc = 0;
} else {
/*
* Don't schedule any more receive processing
* until the line discipline tells us there's
* space available (through comhwiflow()).
* Leave the rest of the data in the input
* buffer.
*/
SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED);
}
break;
}
get += 2;
if (get >= end)
get = sc->sc_rbuf;
cc--;
}
if (cc != scc) {
sc->sc_rbget = get;
mutex_spin_enter(&sc->sc_lock);
cc = sc->sc_rbavail += scc - cc;
/* Buffers should be ok again, release possible block. */
if (cc >= sc->sc_r_lowat) {
if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) {
CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
SET(sc->sc_ier, IER_ERXRDY);
#ifdef COM_PXA2X0
if (sc->sc_type == COM_TYPE_PXA2x0)
SET(sc->sc_ier, IER_ERXTOUT);
#endif
CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier);
}
if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) {
CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED);
com_hwiflow(sc);
}
}
mutex_spin_exit(&sc->sc_lock);
}
}
integrate void
com_txsoft(struct com_softc *sc, struct tty *tp)
{
CLR(tp->t_state, TS_BUSY);
if (ISSET(tp->t_state, TS_FLUSH))
CLR(tp->t_state, TS_FLUSH);
else
ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf));
(*tp->t_linesw->l_start)(tp);
}
integrate void
com_stsoft(struct com_softc *sc, struct tty *tp)
{
u_char msr, delta;
mutex_spin_enter(&sc->sc_lock);
msr = sc->sc_msr;
delta = sc->sc_msr_delta;
sc->sc_msr_delta = 0;
mutex_spin_exit(&sc->sc_lock);
if (ISSET(delta, sc->sc_msr_dcd)) {
/*
* Inform the tty layer that carrier detect changed.
*/
(void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, MSR_DCD));
}
if (ISSET(delta, sc->sc_msr_cts)) {
/* Block or unblock output according to flow control. */
if (ISSET(msr, sc->sc_msr_cts)) {
sc->sc_tx_stopped = 0;
(*tp->t_linesw->l_start)(tp);
} else {
sc->sc_tx_stopped = 1;
}
}
#ifdef COM_DEBUG
if (com_debug)
comstatus(sc, "com_stsoft");
#endif
}
void
comsoft(void *arg)
{
struct com_softc *sc = arg;
struct tty *tp;
if (COM_ISALIVE(sc) == 0)
return;
tp = sc->sc_tty;
if (sc->sc_rx_ready) {
sc->sc_rx_ready = 0;
com_rxsoft(sc, tp);
}
if (sc->sc_st_check) {
sc->sc_st_check = 0;
com_stsoft(sc, tp);
}
if (sc->sc_tx_done) {
sc->sc_tx_done = 0;
com_txsoft(sc, tp);
}
}
int
comintr(void *arg)
{
struct com_softc *sc = arg;
struct com_regs *regsp = &sc->sc_regs;
u_char *put, *end;
u_int cc;
u_char lsr, iir;
if (COM_ISALIVE(sc) == 0)
return (0);
mutex_spin_enter(&sc->sc_lock);
iir = CSR_READ_1(regsp, COM_REG_IIR);
if (ISSET(iir, IIR_NOPEND)) {
mutex_spin_exit(&sc->sc_lock);
return (0);
}
end = sc->sc_ebuf;
put = sc->sc_rbput;
cc = sc->sc_rbavail;
again: do {
u_char msr, delta;
lsr = CSR_READ_1(regsp, COM_REG_LSR);
if (ISSET(lsr, LSR_BI)) {
int cn_trapped = 0;
cn_check_magic(sc->sc_tty->t_dev,
CNC_BREAK, com_cnm_state);
if (cn_trapped)
continue;
#if defined(KGDB) && !defined(DDB)
if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) {
kgdb_connect(1);
continue;
}
#endif
}
if (ISSET(lsr, LSR_RCV_MASK) &&
!ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) {
while (cc > 0) {
int cn_trapped = 0;
put[0] = CSR_READ_1(regsp, COM_REG_RXDATA);
put[1] = lsr;
cn_check_magic(sc->sc_tty->t_dev,
put[0], com_cnm_state);
if (cn_trapped)
goto next;
put += 2;
if (put >= end)
put = sc->sc_rbuf;
cc--;
next:
lsr = CSR_READ_1(regsp, COM_REG_LSR);
if (!ISSET(lsr, LSR_RCV_MASK))
break;
}
/*
* Current string of incoming characters ended because
* no more data was available or we ran out of space.
* Schedule a receive event if any data was received.
* If we're out of space, turn off receive interrupts.
*/
sc->sc_rbput = put;
sc->sc_rbavail = cc;
if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED))
sc->sc_rx_ready = 1;
/*
* See if we are in danger of overflowing a buffer. If
* so, use hardware flow control to ease the pressure.
*/
if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) &&
cc < sc->sc_r_hiwat) {
SET(sc->sc_rx_flags, RX_IBUF_BLOCKED);
com_hwiflow(sc);
}
/*
* If we're out of space, disable receive interrupts
* until the queue has drained a bit.
*/
if (!cc) {
SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
#ifdef COM_PXA2X0
if (sc->sc_type == COM_TYPE_PXA2x0)
CLR(sc->sc_ier, IER_ERXRDY|IER_ERXTOUT);
else
#endif
CLR(sc->sc_ier, IER_ERXRDY);
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
}
} else {
if ((iir & (IIR_RXRDY|IIR_TXRDY)) == IIR_RXRDY) {
(void) CSR_READ_1(regsp, COM_REG_RXDATA);
continue;
}
}
msr = CSR_READ_1(regsp, COM_REG_MSR);
delta = msr ^ sc->sc_msr;
sc->sc_msr = msr;
if ((sc->sc_pps_state.ppsparam.mode & PPS_CAPTUREBOTH) &&
(delta & MSR_DCD)) {
mutex_spin_enter(&timecounter_lock);
pps_capture(&sc->sc_pps_state);
pps_event(&sc->sc_pps_state,
(msr & MSR_DCD) ?
PPS_CAPTUREASSERT :
PPS_CAPTURECLEAR);
mutex_spin_exit(&timecounter_lock);
}
/*
* Process normal status changes
*/
if (ISSET(delta, sc->sc_msr_mask)) {
SET(sc->sc_msr_delta, delta);
/*
* Stop output immediately if we lose the output
* flow control signal or carrier detect.
*/
if (ISSET(~msr, sc->sc_msr_mask)) {
sc->sc_tbc = 0;
sc->sc_heldtbc = 0;
#ifdef COM_DEBUG
if (com_debug)
comstatus(sc, "comintr ");
#endif
}
sc->sc_st_check = 1;
}
} while (!ISSET((iir =
CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND) &&
/*
* Since some device (e.g., ST16C1550) doesn't clear IIR_TXRDY
* by IIR read, so we can't do this way: `process all interrupts,
* then do TX if possble'.
*/
(iir & IIR_IMASK) != IIR_TXRDY);
/*
* Read LSR again, since there may be an interrupt between
* the last LSR read and IIR read above.
*/
lsr = CSR_READ_1(regsp, COM_REG_LSR);
/*
* See if data can be transmitted as well.
* Schedule tx done event if no data left
* and tty was marked busy.
*/
if (ISSET(lsr, LSR_TXRDY)) {
/*
* If we've delayed a parameter change, do it now, and restart
* output.
*/
if (sc->sc_heldchange) {
com_loadchannelregs(sc);
sc->sc_heldchange = 0;
sc->sc_tbc = sc->sc_heldtbc;
sc->sc_heldtbc = 0;
}
/* Output the next chunk of the contiguous buffer, if any. */
if (sc->sc_tbc > 0) {
u_int n;
n = sc->sc_tbc;
if (n > sc->sc_fifolen)
n = sc->sc_fifolen;
CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n);
sc->sc_tbc -= n;
sc->sc_tba += n;
} else {
/* Disable transmit completion interrupts if necessary. */
if (ISSET(sc->sc_ier, IER_ETXRDY)) {
CLR(sc->sc_ier, IER_ETXRDY);
CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier);
}
if (sc->sc_tx_busy) {
sc->sc_tx_busy = 0;
sc->sc_tx_done = 1;
}
}
}
if (!ISSET((iir = CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND))
goto again;
mutex_spin_exit(&sc->sc_lock);
/* Wake up the poller. */
softint_schedule(sc->sc_si);
#if NRND > 0 && defined(RND_COM)
rnd_add_uint32(&sc->rnd_source, iir | lsr);
#endif
return (1);
}
/*
* The following functions are polled getc and putc routines, shared
* by the console and kgdb glue.
*
* The read-ahead code is so that you can detect pending in-band
* cn_magic in polled mode while doing output rather than having to
* wait until the kernel decides it needs input.
*/
#define MAX_READAHEAD 20
static int com_readahead[MAX_READAHEAD];
static int com_readaheadcount = 0;
int
com_common_getc(dev_t dev, struct com_regs *regsp)
{
int s = splserial();
u_char stat, c;
/* got a character from reading things earlier */
if (com_readaheadcount > 0) {
int i;
c = com_readahead[0];
for (i = 1; i < com_readaheadcount; i++) {
com_readahead[i-1] = com_readahead[i];
}
com_readaheadcount--;
splx(s);
return (c);
}
/* block until a character becomes available */
while (!ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY))
;
c = CSR_READ_1(regsp, COM_REG_RXDATA);
stat = CSR_READ_1(regsp, COM_REG_IIR);
{
int cn_trapped = 0; /* unused */
#ifdef DDB
extern int db_active;
if (!db_active)
#endif
cn_check_magic(dev, c, com_cnm_state);
}
splx(s);
return (c);
}
void
com_common_putc(dev_t dev, struct com_regs *regsp, int c)
{
int s = splserial();
int cin, stat, timo;
if (com_readaheadcount < MAX_READAHEAD
&& ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)) {
int cn_trapped = 0;
cin = CSR_READ_1(regsp, COM_REG_RXDATA);
stat = CSR_READ_1(regsp, COM_REG_IIR);
cn_check_magic(dev, cin, com_cnm_state);
com_readahead[com_readaheadcount++] = cin;
}
/* wait for any pending transmission to finish */
timo = 150000;
while (!ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_TXRDY) && --timo)
continue;
CSR_WRITE_1(regsp, COM_REG_TXDATA, c);
COM_BARRIER(regsp, BR | BW);
splx(s);
}
/*
* Initialize UART for use as console or KGDB line.
*/
int
cominit(struct com_regs *regsp, int rate, int frequency, int type,
tcflag_t cflag)
{
if (bus_space_map(regsp->cr_iot, regsp->cr_iobase, regsp->cr_nports, 0,
&regsp->cr_ioh))
return (ENOMEM); /* ??? */
if (type == COM_TYPE_OMAP) {
/* disable before changing settings */
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE);
}
rate = comspeed(rate, frequency, type);
if (type != COM_TYPE_AU1x00) {
/* no EFR on alchemy */
if (type != COM_TYPE_16550_NOERS) {
CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS);
CSR_WRITE_1(regsp, COM_REG_EFR, 0);
}
CSR_WRITE_1(regsp, COM_REG_LCR, LCR_DLAB);
CSR_WRITE_1(regsp, COM_REG_DLBL, rate & 0xff);
CSR_WRITE_1(regsp, COM_REG_DLBH, rate >> 8);
} else {
CSR_WRITE_1(regsp, COM_REG_DLBL, rate);
}
CSR_WRITE_1(regsp, COM_REG_LCR, cflag2lcr(cflag));
CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS);
CSR_WRITE_1(regsp, COM_REG_FIFO,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1);
if (type == COM_TYPE_OMAP) {
/* setup the fifos. the FCR value is not used as long
as SCR[6] and SCR[7] are 0, which they are at reset
and we never touch the SCR register */
uint8_t rx_fifo_trig = 40;
uint8_t tx_fifo_trig = 60;
uint8_t rx_start = 8;
uint8_t rx_halt = 60;
uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2);
uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2);
/* enable access to TCR & TLR */
CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS | MCR_TCR_TLR);
/* write tcr and tlr values */
CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value);
CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value);
/* disable access to TCR & TLR */
CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS);
/* enable again, but mode is based on speed */
if (rate > 230400) {
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X);
} else {
CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X);
}
}
#ifdef COM_PXA2X0
if (type == COM_TYPE_PXA2x0)
CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART);
else
#endif
CSR_WRITE_1(regsp, COM_REG_IER, 0);
return (0);
}
/*
* Following are all routines needed for COM to act as console
*/
struct consdev comcons = {
NULL, NULL, comcngetc, comcnputc, comcnpollc, NULL, NULL, NULL,
NODEV, CN_NORMAL
};
int
comcnattach1(struct com_regs *regsp, int rate, int frequency, int type,
tcflag_t cflag)
{
int res;
comconsregs = *regsp;
res = cominit(&comconsregs, rate, frequency, type, cflag);
if (res)
return (res);
cn_tab = &comcons;
cn_init_magic(&com_cnm_state);
cn_set_magic("\047\001"); /* default magic is BREAK */
comconsrate = rate;
comconscflag = cflag;
return (0);
}
int
comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency,
int type, tcflag_t cflag)
{
struct com_regs regs;
memset(&regs, 0, sizeof regs);
regs.cr_iot = iot;
regs.cr_iobase = iobase;
regs.cr_nports = COM_NPORTS;
#ifdef COM_REGMAP
memcpy(regs.cr_map, com_std_map, sizeof (regs.cr_map));
#endif
return comcnattach1(&regs, rate, frequency, type, cflag);
}
int
comcngetc(dev_t dev)
{
return (com_common_getc(dev, &comconsregs));
}
/*
* Console kernel output character routine.
*/
void
comcnputc(dev_t dev, int c)
{
com_common_putc(dev, &comconsregs, c);
}
void
comcnpollc(dev_t dev, int on)
{
}
#ifdef KGDB
int
com_kgdb_attach1(struct com_regs *regsp, int rate, int frequency, int type,
tcflag_t cflag)
{
int res;
if (regsp->cr_iot == comconsregs.cr_iot &&
regsp->cr_iobase == comconsregs.cr_iobase) {
#if !defined(DDB)
return (EBUSY); /* cannot share with console */
#else
comkgdbregs = *regsp;
comkgdbregs.cr_ioh = comconsregs.cr_ioh;
#endif
} else {
comkgdbregs = *regsp;
res = cominit(&comkgdbregs, rate, frequency, type, cflag);
if (res)
return (res);
/*
* XXXfvdl this shouldn't be needed, but the cn_magic goo
* expects this to be initialized
*/
cn_init_magic(&com_cnm_state);
cn_set_magic("\047\001");
}
kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL);
kgdb_dev = 123; /* unneeded, only to satisfy some tests */
return (0);
}
int
com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate,
int frequency, int type, tcflag_t cflag)
{
struct com_regs regs;
regs.cr_iot = iot;
regs.cr_nports = COM_NPORTS;
regs.cr_iobase = iobase;
#ifdef COM_REGMAP
memcpy(regs.cr_map, com_std_map, sizeof (regs.cr_map));
#endif
return com_kgdb_attach1(&regs, rate, frequency, type, cflag);
}
/* ARGSUSED */
int
com_kgdb_getc(void *arg)
{
return (com_common_getc(NODEV, &comkgdbregs));
}
/* ARGSUSED */
void
com_kgdb_putc(void *arg, int c)
{
com_common_putc(NODEV, &comkgdbregs, c);
}
#endif /* KGDB */
/* helper function to identify the com ports used by
console or KGDB (and not yet autoconf attached) */
int
com_is_console(bus_space_tag_t iot, bus_addr_t iobase, bus_space_handle_t *ioh)
{
bus_space_handle_t help;
if (!comconsattached &&
iot == comconsregs.cr_iot && iobase == comconsregs.cr_iobase)
help = comconsregs.cr_ioh;
#ifdef KGDB
else if (!com_kgdb_attached &&
iot == comkgdbregs.cr_iot && iobase == comkgdbregs.cr_iobase)
help = comkgdbregs.cr_ioh;
#endif
else
return (0);
if (ioh)
*ioh = help;
return (1);
}
/*
* this routine exists to serve as a shutdown hook for systems that
* have firmware which doesn't interact properly with a com device in
* FIFO mode.
*/
bool
com_cleanup(device_t self, int how)
{
struct com_softc *sc = device_private(self);
if (ISSET(sc->sc_hwflags, COM_HW_FIFO))
CSR_WRITE_1(&sc->sc_regs, COM_REG_FIFO, 0);
return true;
}
bool
com_suspend(device_t self PMF_FN_ARGS)
{
struct com_softc *sc = device_private(self);
CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, 0);
(void)CSR_READ_1(&sc->sc_regs, COM_REG_IIR);
return true;
}
bool
com_resume(device_t self PMF_FN_ARGS)
{
struct com_softc *sc = device_private(self);
mutex_spin_enter(&sc->sc_lock);
com_loadchannelregs(sc);
mutex_spin_exit(&sc->sc_lock);
return true;
}
Reference in New Issue View Git Blame Copy Permalink