NetBSD/sys/arch/amiga/dev/ser.c

1077 lines
21 KiB
C

/* $NetBSD: ser.c,v 1.23 1994/10/26 02:04:51 cgd Exp $ */
/*
* Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ser.c 7.12 (Berkeley) 6/27/91
*/
/*
* XXX This file needs major cleanup it will never ervice more than one
* XXX unit.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/queue.h>
#include <machine/cpu.h>
#include <amiga/amiga/device.h>
#include <amiga/dev/serreg.h>
#include <amiga/amiga/custom.h>
#include <amiga/amiga/cia.h>
#include <amiga/amiga/cc.h>
#include <dev/cons.h>
#include "ser.h"
#if NSER > 0
void serattach __P((struct device *, struct device *, void *));
int sermatch __P((struct device *, struct cfdata *, void *));
struct cfdriver sercd = {
NULL, "ser", sermatch, serattach, DV_TTY,
sizeof(struct device), NULL, 0 };
#define SEROBUF_SIZE 32
#define SERIBUF_SIZE 512
int serstart(), serparam(), serintr(), serhwiflow();
int ser_active;
int ser_hasfifo;
int nser = NSER;
#ifdef SERCONSOLE
int serconsole = SERCONSOLE;
#else
int serconsole = -1;
#endif
int serconsinit;
int serdefaultrate = TTYDEF_SPEED;
int sermajor;
int serswflags;
#define SWFLAGS(dev) (serswflags | (DIALOUT(dev) ? TIOCFLAG_SOFTCAR : 0))
struct vbl_node ser_vbl_node[NSER];
struct tty ser_cons;
struct tty *ser_tty[NSER];
struct speedtab serspeedtab[] = {
0, 0,
50, SERBRD(50),
75, SERBRD(75),
110, SERBRD(110),
134, SERBRD(134),
150, SERBRD(150),
200, SERBRD(200),
300, SERBRD(300),
600, SERBRD(600),
1200, SERBRD(1200),
1800, SERBRD(1800),
2400, SERBRD(2400),
4800, SERBRD(4800),
9600, SERBRD(9600),
19200, SERBRD(19200),
38400, SERBRD(38400),
57600, SERBRD(57600),
76800, SERBRD(76800),
115200, SERBRD(115200),
-1, -1
};
/*
* Since this UART is not particularly bright (to put it nicely), we'll
* have to do parity stuff on our own. This table contains the 8th bit
* in 7bit character mode, for even parity. If you want odd parity,
* flip the bit. (for generation of the table, see genpar.c)
*/
u_char even_parity[] = {
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
};
/*
* Since we don't get interrupts for changes on the modem control line,
* we'll have to fake them by comparing current settings to the settings
* we remembered on last invocation.
*/
u_char last_ciab_pra;
extern struct tty *constty;
#ifdef KGDB
#include <machine/remote-sl.h>
extern dev_t kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
#ifdef DEBUG
long fifoin[17];
long fifoout[17];
long serintrcount[16];
long sermintcount[16];
#endif
void sermint __P((register int unit));
int
sermatch(pdp, cfp, auxp)
struct device *pdp;
struct cfdata *cfp;
void *auxp;
{
if (matchname("ser", (char *)auxp) == 0 || cfp->cf_unit != 0)
return(0);
if (serconsole != 0 && amiga_realconfig == 0)
return(0);
return(1);
}
void
serattach(pdp, dp, auxp)
struct device *pdp, *dp;
void *auxp;
{
u_short ir;
ir = custom.intenar;
if (serconsole == 0)
DELAY(100000);
ser_active |= 1;
ser_vbl_node[0].function = (void (*) (void *)) sermint;
add_vbl_function(&ser_vbl_node[0], SER_VBL_PRIORITY, (void *) 0);
#ifdef KGDB
if (kgdb_dev == makedev(sermajor, 0)) {
if (serconsole == 0)
kgdb_dev = NODEV; /* can't debug over console port */
else {
(void) serinit(0, kgdb_rate);
serconsinit = 1; /* don't re-init in serputc */
if (kgdb_debug_init == 0)
printf(" kgdb enabled\n");
else {
/*
* Print prefix of device name,
* let kgdb_connect print the rest.
*/
printf("ser0: ");
kgdb_connect(1);
}
}
}
#endif
/*
* Need to reset baud rate, etc. of next print so reset serconsinit.
*/
if (0 == serconsole)
serconsinit = 0;
if (dp)
printf(": input fifo %d output fifo %d\n", SERIBUF_SIZE,
SEROBUF_SIZE);
}
/* ARGSUSED */
int
seropen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
struct tty *tp;
int unit, error, s;
error = 0;
unit = SERUNIT(dev);
if (unit >= NSER || (ser_active & (1 << unit)) == 0)
return (ENXIO);
s = spltty();
if (ser_tty[unit])
tp = ser_tty[unit];
else
tp = ser_tty[unit] = ttymalloc();
tp->t_oproc = (void (*) (struct tty *)) serstart;
tp->t_param = serparam;
tp->t_dev = dev;
tp->t_hwiflow = serhwiflow;
if ((tp->t_state & TS_ISOPEN) == 0) {
tp->t_state |= TS_WOPEN;
ttychars(tp);
if (tp->t_ispeed == 0) {
/*
* only when cleared do we reset to defaults.
*/
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = TTYDEF_CFLAG;
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = serdefaultrate;
}
/*
* do these all the time
*/
if (serswflags & TIOCFLAG_CLOCAL)
tp->t_cflag |= CLOCAL;
if (serswflags & TIOCFLAG_CRTSCTS)
tp->t_cflag |= CRTSCTS;
if (serswflags & TIOCFLAG_MDMBUF)
tp->t_cflag |= MDMBUF;
serparam(tp, &tp->t_termios);
ttsetwater(tp);
(void)sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMSET);
if ((SWFLAGS(dev) & TIOCFLAG_SOFTCAR) ||
(sermctl(dev, 0, DMGET) & TIOCM_CD))
tp->t_state |= TS_CARR_ON;
else
tp->t_state &= ~TS_CARR_ON;
} else if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) {
splx(s);
return(EBUSY);
}
/*
* if NONBLOCK requested, ignore carrier
*/
if (flag & O_NONBLOCK)
goto done;
/*
* block waiting for carrier
*/
while ((tp->t_state & TS_CARR_ON) == 0 && (tp->t_cflag & CLOCAL) == 0) {
tp->t_state |= TS_WOPEN;
error = ttysleep(tp, (caddr_t)&tp->t_rawq,
TTIPRI | PCATCH, ttopen, 0);
if (error) {
splx(s);
return(error);
}
}
done:
/* This is a way to handle lost XON characters */
if ((flag & O_TRUNC) && (tp->t_state & TS_TTSTOP)) {
tp->t_state &= ~TS_TTSTOP;
ttstart (tp);
}
splx(s);
/*
* Reset the tty pointer, as there could have been a dialout
* use of the tty with a dialin open waiting.
*/
tp->t_dev = dev;
return((*linesw[tp->t_line].l_open)(dev, tp));
}
/*ARGSUSED*/
int
serclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
struct tty *tp;
int unit;
unit = SERUNIT(dev);
tp = ser_tty[unit];
(*linesw[tp->t_line].l_close)(tp, flag);
custom.adkcon = ADKCONF_UARTBRK; /* clear break */
#ifdef KGDB
/*
* do not disable interrupts if debugging
*/
if (dev != kgdb_dev)
#endif
custom.intena = INTF_RBF | INTF_TBE; /* disable interrups */
custom.intreq = INTF_RBF | INTF_TBE; /* clear intr request */
/*
* If the device is closed, it's close, no matter whether we deal with
* modem control signals nor not.
*/
#if 0
if (tp->t_cflag & HUPCL || tp->t_state & TS_WOPEN ||
(tp->t_state & TS_ISOPEN) == 0)
#endif
(void) sermctl(dev, 0, DMSET);
ttyclose(tp);
#if not_yet
if (tp != &ser_cons) {
remove_vbl_function(&ser_vbl_node[unit]);
ttyfree(tp);
ser_tty[unit] = (struct tty *) NULL;
}
#endif
return (0);
}
int
serread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct tty *tp;
if ((tp = ser_tty[SERUNIT(dev)]) == NULL)
return(ENXIO);
return((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
serwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct tty *tp;
if((tp = ser_tty[SERUNIT(dev)]) == NULL)
return(ENXIO);
return((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
/*
* We don't do any processing of data here, so we store the raw code
* obtained from the uart register. In theory, 110kBaud gives you
* 11kcps, so 16k buffer should be more than enough, interrupt
* latency of 1s should never happen, or something is seriously
* wrong..
*/
static u_short serbuf[SERIBUF_SIZE];
static u_short *sbrpt = serbuf;
static u_short *sbwpt = serbuf;
static u_short sbcnt;
static u_short sbovfl;
/*
* This is a replacement for the lack of a hardware fifo. 32k should be
* enough (there's only one unit anyway, so this is not going to
* accumulate).
*/
void
ser_fastint()
{
/*
* We're at RBE-level, which is higher than VBL-level which is used
* to periodically transmit contents of this buffer up one layer,
* so no spl-raising is necessary.
*/
register u_short ints, code;
ints = custom.intreqr & INTF_RBF;
if (ints == 0)
return;
/*
* clear interrupt
*/
custom.intreq = ints;
/*
* this register contains both data and status bits!
*/
code = custom.serdatr;
/*
* check for buffer overflow.
*/
if (sbcnt == SERIBUF_SIZE) {
++sbovfl;
return;
}
/*
* store in buffer
*/
*sbwpt++ = code;
if (sbwpt == serbuf + SERIBUF_SIZE)
sbwpt = serbuf;
++sbcnt;
if (sbcnt > SERIBUF_SIZE - 4)
CLRRTS(ciab.pra); /* drop RTS if buffer almost full */
}
int
serintr(unit)
int unit;
{
int s1, s2, ovfl;
struct tty *tp = ser_tty[unit];
/*
* Make sure we're not interrupted by another
* vbl, but allow level5 ints
*/
s1 = spltty();
/*
* pass along any acumulated information
*/
while (sbcnt > 0 && (tp->t_state & TS_TBLOCK) == 0) {
/*
* no collision with ser_fastint()
*/
sereint(unit, *sbrpt++);
ovfl = 0;
/* lock against ser_fastint() */
s2 = spl5();
sbcnt--;
if (sbrpt == serbuf + SERIBUF_SIZE)
sbrpt = serbuf;
if (sbovfl != 0) {
ovfl = sbovfl;
sbovfl = 0;
}
splx(s2);
if (ovfl != 0)
log(LOG_WARNING, "ser0: %d ring buffer overflows.\n",
ovfl);
}
if (sbcnt == 0 && (tp->t_state & TS_TBLOCK) == 0)
SETRTS(ciab.pra); /* start accepting data again */
splx(s1);
}
int
sereint(unit, stat)
int unit, stat;
{
struct tty *tp;
u_char ch;
int c;
tp = ser_tty[unit];
ch = stat & 0xff;
c = ch;
if ((tp->t_state & TS_ISOPEN) == 0) {
#ifdef KGDB
/* we don't care about parity errors */
if (kgdb_dev == makedev(sermajor, unit) && c == FRAME_END)
kgdb_connect(0); /* trap into kgdb */
#endif
return;
}
/*
* Check for break and (if enabled) parity error.
*/
if ((stat & 0x1ff) == 0)
c |= TTY_FE;
else if ((tp->t_cflag & PARENB) &&
(((ch >> 7) + even_parity[ch & 0x7f]
+ !!(tp->t_cflag & PARODD)) & 1))
c |= TTY_PE;
if (stat & SERDATRF_OVRUN)
log(LOG_WARNING, "ser0: silo overflow\n");
(*linesw[tp->t_line].l_rint)(c, tp);
}
/*
* This interrupt is periodically invoked in the vertical blank
* interrupt. It's used to keep track of the modem control lines
* and (new with the fast_int code) to move accumulated data
* up into the tty layer.
*/
void
sermint(unit)
int unit;
{
struct tty *tp;
u_char stat, last, istat;
tp = ser_tty[unit];
if (!tp)
return;
if ((tp->t_state & (TS_ISOPEN | TS_WOPEN)) == 0) {
sbrpt = sbwpt = serbuf;
return;
}
/*
* empty buffer
*/
serintr(unit);
stat = ciab.pra;
last = last_ciab_pra;
last_ciab_pra = stat;
/*
* check whether any interesting signal changed state
*/
istat = stat ^ last;
if ((istat & CIAB_PRA_CD) &&
(SWFLAGS(tp->t_dev) & TIOCFLAG_SOFTCAR) == 0) {
if (ISDCD(stat))
(*linesw[tp->t_line].l_modem)(tp, 1);
else if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
CLRDTR(stat);
CLRRTS(stat);
ciab.pra = stat;
last_ciab_pra = stat;
}
}
if ((istat & CIAB_PRA_CTS) && (tp->t_state & TS_ISOPEN) &&
(tp->t_cflag & CRTSCTS)) {
#if 0
/* the line is up and we want to do rts/cts flow control */
if (ISCTS(stat)) {
tp->t_state &= ~TS_TTSTOP;
ttstart(tp);
/* cause tbe-int if we were stuck there */
custom.intreq = INTF_SETCLR | INTF_TBE;
} else
tp->t_state |= TS_TTSTOP;
#else
/* do this on hardware level, not with tty driver */
if (ISCTS(stat)) {
tp->t_state &= ~TS_TTSTOP;
/* cause TBE interrupt */
custom.intreq = INTF_SETCLR | INTF_TBE;
}
#endif
}
}
int
serioctl(dev, cmd, data, flag, p)
dev_t dev;
caddr_t data;
struct proc *p;
{
register struct tty *tp;
register int unit = SERUNIT(dev);
register int error;
tp = ser_tty[unit];
if (!tp)
return ENXIO;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return(error);
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return(error);
switch (cmd) {
case TIOCSBRK:
custom.adkcon = ADKCONF_SETCLR | ADKCONF_UARTBRK;
break;
case TIOCCBRK:
custom.adkcon = ADKCONF_UARTBRK;
break;
case TIOCSDTR:
(void) sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIS);
break;
case TIOCCDTR:
(void) sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIC);
break;
case TIOCMSET:
(void) sermctl(dev, *(int *) data, DMSET);
break;
case TIOCMBIS:
(void) sermctl(dev, *(int *) data, DMBIS);
break;
case TIOCMBIC:
(void) sermctl(dev, *(int *) data, DMBIC);
break;
case TIOCMGET:
*(int *)data = sermctl(dev, 0, DMGET);
break;
case TIOCGFLAGS:
*(int *)data = SWFLAGS(dev);
break;
case TIOCSFLAGS:
error = suser(p->p_ucred, &p->p_acflag);
if (error != 0)
return(EPERM);
serswflags = *(int *)data;
serswflags &= /* only allow valid flags */
(TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS);
break;
default:
return(ENOTTY);
}
return(0);
}
int
serparam(tp, t)
struct tty *tp;
struct termios *t;
{
int cfcr, cflag, unit, ospeed;
cflag = t->c_cflag;
unit = SERUNIT(tp->t_dev);
ospeed = ttspeedtab(t->c_ospeed, serspeedtab);
if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
return(EINVAL);
/*
* copy to tty
*/
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = cflag;
/*
* enable interrupts
*/
custom.intena = INTF_SETCLR | INTF_RBF | INTF_TBE;
last_ciab_pra = ciab.pra;
if (ospeed == 0)
(void)sermctl(tp->t_dev, 0, DMSET); /* hang up line */
else {
/*
* (re)enable DTR
* and set baud rate. (8 bit mode)
*/
(void)sermctl(tp->t_dev, TIOCM_DTR | TIOCM_RTS, DMSET);
custom.serper = (0 << 15) | ospeed;
}
return(0);
}
int serhwiflow(tp, flag)
struct tty *tp;
int flag;
{
#if 0
printf ("serhwiflow %d\n", flag);
#endif
if (flag)
CLRRTS(ciab.pra);
else
SETRTS(ciab.pra);
return 1;
}
static void
ser_putchar(tp, c)
struct tty *tp;
u_short c;
{
if ((tp->t_cflag & CSIZE) == CS7 || (tp->t_cflag & PARENB))
c &= 0x7f;
/*
* handle parity if necessary
*/
if (tp->t_cflag & PARENB) {
if (even_parity[c])
c |= 0x80;
if (tp->t_cflag & PARODD)
c ^= 0x80;
}
/*
* add stop bit(s)
*/
if (tp->t_cflag & CSTOPB)
c |= 0x300;
else
c |= 0x100;
custom.serdat = c;
}
static u_char ser_outbuf[SEROBUF_SIZE];
static u_char *sob_ptr = ser_outbuf, *sob_end = ser_outbuf;
void
ser_outintr()
{
struct tty *tp = ser_tty[0];
u_short c;
int s;
tp = ser_tty[0];
s = spltty();
if (tp == 0)
goto out;
if ((custom.intreqr & INTF_TBE) == 0)
goto out;
/*
* clear interrupt
*/
custom.intreq = INTF_TBE;
if (sob_ptr == sob_end) {
tp->t_state &= ~(TS_BUSY | TS_FLUSH);
if (tp->t_line)
(*linesw[tp->t_line].l_start)(tp);
else
serstart(tp);
goto out;
}
/*
* Do hardware flow control here. if the CTS line goes down, don't
* transmit anything. That way, we'll be restarted by the periodic
* interrupt when CTS comes back up.
*/
if (ISCTS(ciab.pra))
ser_putchar(tp, *sob_ptr++);
else
CLRCTS(last_ciab_pra); /* Remember that CTS is off */
out:
splx(s);
}
int
serstart(tp)
struct tty *tp;
{
int cc, s, unit, hiwat;
hiwat = 0;
if ((tp->t_state & TS_ISOPEN) == 0)
return;
unit = SERUNIT(tp->t_dev);
s = spltty();
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))
goto out;
cc = tp->t_outq.c_cc;
if (cc <= tp->t_lowat) {
if (tp->t_state & TS_ASLEEP) {
tp->t_state &= ~TS_ASLEEP;
wakeup((caddr_t) & tp->t_outq);
}
selwakeup(&tp->t_wsel);
}
if (cc == 0 || (tp->t_state & TS_BUSY))
goto out;
/*
* We only do bulk transfers if using CTSRTS flow control, not for
* (probably sloooow) ixon/ixoff devices.
*/
if ((tp->t_cflag & CRTSCTS) == 0)
cc = 1;
/*
* Limit the amount of output we do in one burst
* to prevent hogging the CPU.
*/
if (cc > SEROBUF_SIZE) {
hiwat++;
cc = SEROBUF_SIZE;
}
cc = q_to_b(&tp->t_outq, ser_outbuf, cc);
if (cc > 0) {
tp->t_state |= TS_BUSY;
sob_ptr = ser_outbuf;
sob_end = ser_outbuf + cc;
/*
* Get first character out, then have TBE-interrupts blow out
* further characters, until buffer is empty, and TS_BUSY gets
* cleared.
*/
ser_putchar(tp, *sob_ptr++);
}
out:
splx(s);
}
/*
* Stop output on a line.
*/
/*ARGSUSED*/
int
serstop(tp, flag)
struct tty *tp;
{
int s;
s = spltty();
if (tp->t_state & TS_BUSY) {
if ((tp->t_state & TS_TTSTOP) == 0)
tp->t_state |= TS_FLUSH;
}
splx(s);
}
int
sermctl(dev, bits, how)
dev_t dev;
int bits, how;
{
int unit, s;
u_char ub;
unit = SERUNIT(dev);
/*
* convert TIOCM* mask into CIA mask
* which is active low
*/
if (how != DMGET) {
ub = 0;
if (bits & TIOCM_DTR)
ub |= CIAB_PRA_DTR;
if (bits & TIOCM_RTS)
ub |= CIAB_PRA_RTS;
if (bits & TIOCM_CTS)
ub |= CIAB_PRA_CTS;
if (bits & TIOCM_CD)
ub |= CIAB_PRA_CD;
if (bits & TIOCM_RI)
ub |= CIAB_PRA_SEL; /* collision with /dev/par ! */
if (bits & TIOCM_DSR)
ub |= CIAB_PRA_DSR;
}
s = spltty();
switch (how) {
case DMSET:
/* invert and set */
ciab.pra = ~ub;
break;
case DMBIC:
ciab.pra |= ub;
ub = ~ciab.pra;
break;
case DMBIS:
ciab.pra &= ~ub;
ub = ~ciab.pra;
break;
case DMGET:
ub = ~ciab.pra;
break;
}
(void)splx(s);
bits = 0;
if (ub & CIAB_PRA_DTR)
bits |= TIOCM_DTR;
if (ub & CIAB_PRA_RTS)
bits |= TIOCM_RTS;
if (ub & CIAB_PRA_CTS)
bits |= TIOCM_CTS;
if (ub & CIAB_PRA_CD)
bits |= TIOCM_CD;
if (ub & CIAB_PRA_SEL)
bits |= TIOCM_RI;
if (ub & CIAB_PRA_DSR)
bits |= TIOCM_DSR;
return(bits);
}
/*
* Following are all routines needed for SER to act as console
*/
int
sercnprobe(cp)
struct consdev *cp;
{
int unit = CONUNIT;
/* locate the major number */
for (sermajor = 0; sermajor < nchrdev; sermajor++)
if (cdevsw[sermajor].d_open == (void *)seropen)
break;
unit = CONUNIT; /* XXX: ick */
/*
* initialize required fields
*/
cp->cn_dev = makedev(sermajor, unit);
if (serconsole == unit)
cp->cn_pri = CN_REMOTE;
else
cp->cn_pri = CN_NORMAL;
#ifdef KGDB
if (major(kgdb_dev) == 1) /* XXX */
kgdb_dev = makedev(sermajor, minor(kgdb_dev));
#endif
}
sercninit(cp)
struct consdev *cp;
{
int unit;
unit = SERUNIT(cp->cn_dev);
serinit(unit, serdefaultrate);
serconsole = unit;
serconsinit = 1;
}
serinit(unit, rate)
int unit, rate;
{
int s;
s = splhigh();
/*
* might want to fiddle with the CIA later ???
*/
custom.serper = ttspeedtab(rate, serspeedtab);
splx(s);
}
sercngetc(dev)
{
u_short stat;
int c, s;
s = splhigh();
/*
* poll
*/
while (((stat = custom.serdatr & 0xffff) & SERDATRF_RBF) == 0)
;
c = stat & 0xff;
/*
* clear interrupt
*/
custom.intreq = INTF_RBF;
splx(s);
return(c);
}
/*
* Console kernel output character routine.
*/
sercnputc(dev, c)
dev_t dev;
int c;
{
register int timo;
short stat;
int s;
s = splhigh();
if (serconsinit == 0) {
(void)serinit(SERUNIT(dev), serdefaultrate);
serconsinit = 1;
}
/*
* wait for any pending transmission to finish
*/
timo = 50000;
while (!(custom.serdatr & SERDATRF_TBE) && --timo);
/*
* transmit char.
*/
custom.serdat = (c & 0xff) | 0x100;
/*
* wait for this transmission to complete
*/
timo = 1500000;
while (!(custom.serdatr & SERDATRF_TBE) && --timo)
;
/*
* Wait for the device (my vt100..) to process the data, since we
* don't do flow-control with cnputc
*/
for (timo = 0; timo < 30000; timo++)
;
/*
* clear any interrupts generated by this transmission
*/
custom.intreq = INTF_TBE;
splx(s);
}
#endif