982 lines
29 KiB
C
982 lines
29 KiB
C
/* $NetBSD: atapi_wdc.c,v 1.39 2001/01/22 07:00:39 mycroft Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1998 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef WDCDEBUG
|
|
#define WDCDEBUG
|
|
#endif /* WDCDEBUG */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/file.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/dvdio.h>
|
|
|
|
#include <machine/intr.h>
|
|
#include <machine/bus.h>
|
|
|
|
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
|
|
#define bus_space_write_multi_stream_2 bus_space_write_multi_2
|
|
#define bus_space_write_multi_stream_4 bus_space_write_multi_4
|
|
#define bus_space_read_multi_stream_2 bus_space_read_multi_2
|
|
#define bus_space_read_multi_stream_4 bus_space_read_multi_4
|
|
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */
|
|
|
|
#include <dev/ata/atareg.h>
|
|
#include <dev/ata/atavar.h>
|
|
#include <dev/ic/wdcreg.h>
|
|
#include <dev/ic/wdcvar.h>
|
|
|
|
#define DEBUG_INTR 0x01
|
|
#define DEBUG_XFERS 0x02
|
|
#define DEBUG_STATUS 0x04
|
|
#define DEBUG_FUNCS 0x08
|
|
#define DEBUG_PROBE 0x10
|
|
#ifdef WDCDEBUG
|
|
int wdcdebug_atapi_mask = 0;
|
|
#define WDCDEBUG_PRINT(args, level) \
|
|
if (wdcdebug_atapi_mask & (level)) \
|
|
printf args
|
|
#else
|
|
#define WDCDEBUG_PRINT(args, level)
|
|
#endif
|
|
|
|
#define ATAPI_DELAY 10 /* 10 ms, this is used only before sending a cmd */
|
|
|
|
void wdc_atapi_minphys __P((struct buf *bp));
|
|
void wdc_atapi_start __P((struct channel_softc *,struct wdc_xfer *));
|
|
int wdc_atapi_intr __P((struct channel_softc *, struct wdc_xfer *, int));
|
|
void wdc_atapi_kill_xfer __P((struct channel_softc *, struct wdc_xfer *));
|
|
int wdc_atapi_ctrl __P((struct channel_softc *, struct wdc_xfer *, int));
|
|
void wdc_atapi_done __P((struct channel_softc *, struct wdc_xfer *));
|
|
void wdc_atapi_reset __P((struct channel_softc *, struct wdc_xfer *));
|
|
int wdc_atapi_get_params __P((struct scsipi_link *, u_int8_t, int,
|
|
struct ataparams *));
|
|
void wdc_atapi_probedev __P(( struct atapibus_softc *, int));
|
|
int wdc_atapi_send_cmd __P((struct scsipi_xfer *sc_xfer));
|
|
|
|
#define MAX_SIZE MAXPHYS
|
|
|
|
void
|
|
wdc_atapibus_attach(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct wdc_softc *wdc = chp->wdc;
|
|
int channel = chp->channel;
|
|
struct ata_atapi_attach aa_link;
|
|
|
|
/*
|
|
* Fill in the adapter.
|
|
*/
|
|
wdc->sc_atapi_adapter._generic.scsipi_cmd = wdc_atapi_send_cmd;
|
|
wdc->sc_atapi_adapter._generic.scsipi_minphys = wdc_atapi_minphys;
|
|
wdc->sc_atapi_adapter.atapi_probedev = wdc_atapi_probedev;
|
|
wdc->sc_atapi_adapter.atapi_kill_pending = atapi_kill_pending;
|
|
|
|
memset(&aa_link, 0, sizeof(struct ata_atapi_attach));
|
|
aa_link.aa_type = T_ATAPI;
|
|
aa_link.aa_channel = channel;
|
|
aa_link.aa_openings = 1;
|
|
aa_link.aa_drv_data = chp->ch_drive; /* pass the whole array */
|
|
aa_link.aa_bus_private = &wdc->sc_atapi_adapter;
|
|
chp->atapibus = config_found(&wdc->sc_dev, (void *)&aa_link,
|
|
atapi_print);
|
|
}
|
|
|
|
void
|
|
wdc_atapi_minphys (struct buf *bp)
|
|
{
|
|
if(bp->b_bcount > MAX_SIZE)
|
|
bp->b_bcount = MAX_SIZE;
|
|
minphys(bp);
|
|
}
|
|
|
|
/*
|
|
* Kill off all pending xfers for a scsipi_link.
|
|
*
|
|
* Must be called at splbio().
|
|
*/
|
|
void
|
|
atapi_kill_pending(sc_link)
|
|
struct scsipi_link *sc_link;
|
|
{
|
|
struct wdc_softc *wdc = (void *)sc_link->adapter_softc;
|
|
struct channel_softc *chp =
|
|
wdc->channels[sc_link->scsipi_atapi.channel];
|
|
|
|
wdc_kill_pending(chp);
|
|
}
|
|
|
|
void
|
|
wdc_atapi_kill_xfer(chp, xfer)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
|
|
callout_stop(&chp->ch_callout);
|
|
/* remove this command from xfer queue */
|
|
wdc_free_xfer(chp, xfer);
|
|
sc_xfer->xs_status |= XS_STS_DONE;
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
scsipi_done(sc_xfer);
|
|
}
|
|
|
|
int
|
|
wdc_atapi_get_params(ab_link, drive, flags, id)
|
|
struct scsipi_link *ab_link;
|
|
u_int8_t drive;
|
|
int flags;
|
|
struct ataparams *id;
|
|
{
|
|
struct wdc_softc *wdc = (void*)ab_link->adapter_softc;
|
|
struct channel_softc *chp =
|
|
wdc->channels[ab_link->scsipi_atapi.channel];
|
|
struct wdc_command wdc_c;
|
|
|
|
/* if no ATAPI device detected at wdc attach time, skip */
|
|
/*
|
|
* XXX this will break scsireprobe if this is of any interest for
|
|
* ATAPI devices one day.
|
|
*/
|
|
if ((chp->ch_drive[drive].drive_flags & DRIVE_ATAPI) == 0) {
|
|
WDCDEBUG_PRINT(("wdc_atapi_get_params: drive %d not present\n",
|
|
drive), DEBUG_PROBE);
|
|
return -1;
|
|
}
|
|
memset(&wdc_c, 0, sizeof(struct wdc_command));
|
|
wdc_c.r_command = ATAPI_SOFT_RESET;
|
|
wdc_c.r_st_bmask = 0;
|
|
wdc_c.r_st_pmask = 0;
|
|
wdc_c.flags = AT_POLL;
|
|
wdc_c.timeout = WDC_RESET_WAIT;
|
|
if (wdc_exec_command(&chp->ch_drive[drive], &wdc_c) != WDC_COMPLETE) {
|
|
printf("wdc_atapi_get_params: ATAPI_SOFT_RESET failed for"
|
|
" drive %s:%d:%d: driver failed\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drive);
|
|
panic("wdc_atapi_get_params");
|
|
}
|
|
if (wdc_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
|
|
WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_SOFT_RESET "
|
|
"failed for drive %s:%d:%d: error 0x%x\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drive,
|
|
wdc_c.r_error), DEBUG_PROBE);
|
|
return -1;
|
|
}
|
|
chp->ch_drive[drive].state = 0;
|
|
|
|
bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_status);
|
|
|
|
/* Some ATAPI devices need a bit more time after software reset. */
|
|
delay(5000);
|
|
if (ata_get_params(&chp->ch_drive[drive], AT_POLL, id) != 0) {
|
|
WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_IDENTIFY_DEVICE "
|
|
"failed for drive %s:%d:%d: error 0x%x\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drive,
|
|
wdc_c.r_error), DEBUG_PROBE);
|
|
return -1;
|
|
}
|
|
return COMPLETE;
|
|
}
|
|
|
|
void
|
|
wdc_atapi_probedev(atapi, target)
|
|
struct atapibus_softc *atapi;
|
|
int target;
|
|
{
|
|
struct scsipi_link *sc_link;
|
|
struct scsipibus_attach_args sa;
|
|
struct ataparams ids;
|
|
struct ataparams *id = &ids;
|
|
struct ata_drive_datas *drvp = &atapi->sc_drvs[target];
|
|
char serial_number[21], model[41], firmware_revision[9];
|
|
|
|
if (atapi->sc_link[target])
|
|
return;
|
|
if (wdc_atapi_get_params(atapi->adapter_link, target,
|
|
XS_CTL_POLL|XS_CTL_NOSLEEP, id) == COMPLETE) {
|
|
#ifdef ATAPI_DEBUG_PROBE
|
|
printf("%s drive %d: cmdsz 0x%x drqtype 0x%x\n",
|
|
atapi->sc_dev.dv_xname, target,
|
|
id->atap_config & ATAPI_CFG_CMD_MASK,
|
|
id->atap_config & ATAPI_CFG_DRQ_MASK);
|
|
#endif
|
|
/*
|
|
* Allocate a device link and try and attach
|
|
* a driver to this device. If we fail, free
|
|
* the link.
|
|
*/
|
|
sc_link = malloc(sizeof(*sc_link), M_DEVBUF, M_NOWAIT);
|
|
if (sc_link == NULL) {
|
|
printf("%s: can't allocate link for drive %d\n",
|
|
atapi->sc_dev.dv_xname, target);
|
|
return;
|
|
}
|
|
/* fill in the link (IDE-specific part) */
|
|
*sc_link = *atapi->adapter_link;
|
|
if ((id->atap_config & ATAPI_CFG_CMD_MASK) == ATAPI_CFG_CMD_16)
|
|
sc_link->scsipi_atapi.cap |= ACAP_LEN;
|
|
sc_link->scsipi_atapi.cap |=
|
|
(id->atap_config & ATAPI_CFG_DRQ_MASK);
|
|
sa.sa_sc_link = sc_link;
|
|
sa.sa_inqbuf.type = ATAPI_CFG_TYPE(id->atap_config);
|
|
sa.sa_inqbuf.removable =
|
|
id->atap_config & ATAPI_CFG_REMOV ? T_REMOV : T_FIXED;
|
|
if (sa.sa_inqbuf.removable)
|
|
sc_link->flags |= SDEV_REMOVABLE;
|
|
scsipi_strvis(model, 40, id->atap_model, 40);
|
|
scsipi_strvis(serial_number, 20, id->atap_serial, 20);
|
|
scsipi_strvis(firmware_revision, 8, id->atap_revision, 8);
|
|
sa.sa_inqbuf.vendor = model;
|
|
sa.sa_inqbuf.product = serial_number;
|
|
sa.sa_inqbuf.revision = firmware_revision;
|
|
sa.sa_inqptr = NULL;
|
|
drvp->drv_softc = atapi_probedev(atapi, target, sc_link, &sa);
|
|
if (drvp->drv_softc) {
|
|
wdc_probe_caps(drvp);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
wdc_atapi_send_cmd(sc_xfer)
|
|
struct scsipi_xfer *sc_xfer;
|
|
{
|
|
struct wdc_softc *wdc = (void*)sc_xfer->sc_link->adapter_softc;
|
|
struct wdc_xfer *xfer;
|
|
int flags = sc_xfer->xs_control;
|
|
int channel = sc_xfer->sc_link->scsipi_atapi.channel;
|
|
int drive = sc_xfer->sc_link->scsipi_atapi.drive;
|
|
int s, ret;
|
|
|
|
WDCDEBUG_PRINT(("wdc_atapi_send_cmd %s:%d:%d\n",
|
|
wdc->sc_dev.dv_xname, channel, drive), DEBUG_XFERS);
|
|
|
|
if ((wdc->sc_dev.dv_flags & DVF_ACTIVE) == 0) {
|
|
sc_xfer->xs_status |= XS_STS_DONE;
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
scsipi_done(sc_xfer);
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0)
|
|
return (SUCCESSFULLY_QUEUED);
|
|
else
|
|
return (COMPLETE);
|
|
}
|
|
|
|
xfer = wdc_get_xfer((flags & XS_CTL_NOSLEEP) ?
|
|
WDC_NOSLEEP : WDC_CANSLEEP);
|
|
if (xfer == NULL) {
|
|
return TRY_AGAIN_LATER;
|
|
}
|
|
if (sc_xfer->xs_control & XS_CTL_POLL)
|
|
xfer->c_flags |= C_POLL;
|
|
xfer->drive = drive;
|
|
xfer->c_flags |= C_ATAPI;
|
|
if (sc_xfer->cmd->opcode == GPCMD_REPORT_KEY ||
|
|
sc_xfer->cmd->opcode == GPCMD_SEND_KEY ||
|
|
sc_xfer->cmd->opcode == GPCMD_READ_DVD_STRUCTURE) {
|
|
/*
|
|
* DVD authentication commands must always be done in PIO mode.
|
|
*/
|
|
xfer->c_flags |= C_FORCEPIO;
|
|
}
|
|
xfer->cmd = sc_xfer;
|
|
xfer->databuf = sc_xfer->data;
|
|
xfer->c_bcount = sc_xfer->datalen;
|
|
xfer->c_start = wdc_atapi_start;
|
|
xfer->c_intr = wdc_atapi_intr;
|
|
xfer->c_kill_xfer = wdc_atapi_kill_xfer;
|
|
s = splbio();
|
|
wdc_exec_xfer(wdc->channels[channel], xfer);
|
|
#ifdef DIAGNOSTIC
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) != 0 &&
|
|
(sc_xfer->xs_status & XS_STS_DONE) == 0)
|
|
panic("wdc_atapi_send_cmd: polled command not done");
|
|
#endif
|
|
ret = (sc_xfer->xs_status & XS_STS_DONE) ?
|
|
COMPLETE : SUCCESSFULLY_QUEUED;
|
|
splx(s);
|
|
return ret;
|
|
}
|
|
|
|
void
|
|
wdc_atapi_start(chp, xfer)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
|
|
|
|
WDCDEBUG_PRINT(("wdc_atapi_start %s:%d:%d, scsi flags 0x%x \n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive,
|
|
sc_xfer->xs_control), DEBUG_XFERS);
|
|
/* Adjust C_DMA, it may have changed if we are requesting sense */
|
|
if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
|
|
(sc_xfer->datalen > 0 || (xfer->c_flags & C_SENSE)) &&
|
|
!(xfer->c_flags & C_FORCEPIO)) {
|
|
if (drvp->n_xfers <= NXFER)
|
|
drvp->n_xfers++;
|
|
xfer->c_flags |= C_DMA;
|
|
} else {
|
|
xfer->c_flags &= ~C_DMA;
|
|
}
|
|
/* start timeout machinery */
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0)
|
|
callout_reset(&chp->ch_callout, sc_xfer->timeout * hz / 1000,
|
|
wdctimeout, chp);
|
|
/* Do control operations specially. */
|
|
if (drvp->state < READY) {
|
|
if (drvp->state != RESET) {
|
|
printf("%s:%d:%d: bad state %d in wdc_atapi_start\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel,
|
|
xfer->drive, drvp->state);
|
|
panic("wdc_atapi_start: bad state");
|
|
}
|
|
drvp->state = PIOMODE;
|
|
wdc_atapi_ctrl(chp, xfer, 0);
|
|
return;
|
|
}
|
|
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
|
|
WDSD_IBM | (xfer->drive << 4));
|
|
if (wait_for_unbusy(chp, ATAPI_DELAY) < 0) {
|
|
printf("wdc_atapi_start: not ready, st = %02x\n",
|
|
chp->ch_status);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Even with WDCS_ERR, the device should accept a command packet
|
|
* Limit length to what can be stuffed into the cylinder register
|
|
* (16 bits). Some CD-ROMs seem to interpret '0' as 65536,
|
|
* but not all devices do that and it's not obvious from the
|
|
* ATAPI spec that that behaviour should be expected. If more
|
|
* data is necessary, multiple data transfer phases will be done.
|
|
*/
|
|
|
|
wdccommand(chp, xfer->drive, ATAPI_PKT_CMD,
|
|
xfer->c_bcount <= 0xffff ? xfer->c_bcount : 0xffff,
|
|
0, 0, 0,
|
|
(xfer->c_flags & C_DMA) ? ATAPI_PKT_CMD_FTRE_DMA : 0);
|
|
|
|
/*
|
|
* If there is no interrupt for CMD input, busy-wait for it (done in
|
|
* the interrupt routine. If it is a polled command, call the interrupt
|
|
* routine until command is done.
|
|
*/
|
|
if ((sc_xfer->sc_link->scsipi_atapi.cap & ATAPI_CFG_DRQ_MASK) !=
|
|
ATAPI_CFG_IRQ_DRQ || (sc_xfer->xs_control & XS_CTL_POLL)) {
|
|
/* Wait for at last 400ns for status bit to be valid */
|
|
DELAY(1);
|
|
wdc_atapi_intr(chp, xfer, 0);
|
|
} else {
|
|
chp->ch_flags |= WDCF_IRQ_WAIT;
|
|
}
|
|
if (sc_xfer->xs_control & XS_CTL_POLL) {
|
|
while ((sc_xfer->xs_status & XS_STS_DONE) == 0) {
|
|
/* Wait for at last 400ns for status bit to be valid */
|
|
DELAY(1);
|
|
if (chp->ch_flags & WDCF_DMA_WAIT) {
|
|
wdc_dmawait(chp, xfer, sc_xfer->timeout);
|
|
chp->ch_flags &= ~WDCF_DMA_WAIT;
|
|
}
|
|
wdc_atapi_intr(chp, xfer, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
wdc_atapi_intr(chp, xfer, irq)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
int irq;
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
|
|
int len, phase, i, retries=0;
|
|
int ire;
|
|
int dma_flags = 0;
|
|
struct scsipi_generic _cmd_reqsense;
|
|
struct scsipi_sense *cmd_reqsense =
|
|
(struct scsipi_sense *)&_cmd_reqsense;
|
|
void *cmd;
|
|
|
|
WDCDEBUG_PRINT(("wdc_atapi_intr %s:%d:%d\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), DEBUG_INTR);
|
|
|
|
/* Is it not a transfer, but a control operation? */
|
|
if (drvp->state < READY) {
|
|
printf("%s:%d:%d: bad state %d in wdc_atapi_intr\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
|
|
drvp->state);
|
|
panic("wdc_atapi_intr: bad state\n");
|
|
}
|
|
/*
|
|
* If we missed an interrupt in a PIO transfer, reset and restart.
|
|
* Don't try to continue transfer, we may have missed cycles.
|
|
*/
|
|
if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
/* Ack interrupt done in wait_for_unbusy */
|
|
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
|
|
WDSD_IBM | (xfer->drive << 4));
|
|
if (wait_for_unbusy(chp,
|
|
(irq == 0) ? sc_xfer->timeout : 0) != 0) {
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0)
|
|
return 0; /* IRQ was not for us */
|
|
printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip=%d\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
|
|
xfer->c_bcount, xfer->c_skip);
|
|
if (xfer->c_flags & C_DMA) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
if (chp->wdc->cap & WDC_CAPABILITY_IRQACK)
|
|
chp->wdc->irqack(chp);
|
|
|
|
/* If we missed an IRQ and were using DMA, flag it as a DMA error */
|
|
if ((xfer->c_flags & C_TIMEOU) && (xfer->c_flags & C_DMA)) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
/*
|
|
* if the request sense command was aborted, report the short sense
|
|
* previously recorded, else continue normal processing
|
|
*/
|
|
|
|
if ((xfer->c_flags & C_SENSE) != 0 &&
|
|
(chp->ch_status & WDCS_ERR) != 0 &&
|
|
(chp->ch_error & WDCE_ABRT) != 0) {
|
|
WDCDEBUG_PRINT(("wdc_atapi_intr: request_sense aborted, "
|
|
"calling wdc_atapi_done(), sense 0x%x\n",
|
|
sc_xfer->sense.atapi_sense), DEBUG_INTR);
|
|
wdc_atapi_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
if (xfer->c_flags & C_DMA)
|
|
dma_flags = ((sc_xfer->xs_control & XS_CTL_DATA_IN) ||
|
|
(xfer->c_flags & C_SENSE)) ? WDC_DMA_READ : 0;
|
|
again:
|
|
len = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_lo) +
|
|
256 * bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_hi);
|
|
ire = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_ireason);
|
|
phase = (ire & (WDCI_CMD | WDCI_IN)) | (chp->ch_status & WDCS_DRQ);
|
|
WDCDEBUG_PRINT(("wdc_atapi_intr: c_bcount %d len %d st 0x%x err 0x%x "
|
|
"ire 0x%x :", xfer->c_bcount,
|
|
len, chp->ch_status, chp->ch_error, ire), DEBUG_INTR);
|
|
|
|
switch (phase) {
|
|
case PHASE_CMDOUT:
|
|
if (xfer->c_flags & C_SENSE) {
|
|
memset(cmd_reqsense, 0, sizeof(struct scsipi_generic));
|
|
cmd_reqsense->opcode = REQUEST_SENSE;
|
|
cmd_reqsense->length = xfer->c_bcount;
|
|
cmd = cmd_reqsense;
|
|
} else {
|
|
cmd = sc_xfer->cmd;
|
|
}
|
|
WDCDEBUG_PRINT(("PHASE_CMDOUT\n"), DEBUG_INTR);
|
|
/* Init the DMA channel if necessary */
|
|
if (xfer->c_flags & C_DMA) {
|
|
if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,
|
|
chp->channel, xfer->drive,
|
|
xfer->databuf, xfer->c_bcount, dma_flags) != 0) {
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
}
|
|
}
|
|
/* send packet command */
|
|
/* Commands are 12 or 16 bytes long. It's 32-bit aligned */
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
|
|
if (drvp->drive_flags & DRIVE_CAP32) {
|
|
bus_space_write_multi_4(chp->data32iot,
|
|
chp->data32ioh, 0,
|
|
(u_int32_t *)cmd,
|
|
sc_xfer->cmdlen >> 2);
|
|
} else {
|
|
bus_space_write_multi_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)cmd,
|
|
sc_xfer->cmdlen >> 1);
|
|
}
|
|
} else {
|
|
if (drvp->drive_flags & DRIVE_CAP32) {
|
|
bus_space_write_multi_stream_4(chp->data32iot,
|
|
chp->data32ioh, 0,
|
|
(u_int32_t *)cmd,
|
|
sc_xfer->cmdlen >> 2);
|
|
} else {
|
|
bus_space_write_multi_stream_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)cmd,
|
|
sc_xfer->cmdlen >> 1);
|
|
}
|
|
}
|
|
/* Start the DMA channel if necessary */
|
|
if (xfer->c_flags & C_DMA) {
|
|
(*chp->wdc->dma_start)(chp->wdc->dma_arg,
|
|
chp->channel, xfer->drive);
|
|
chp->ch_flags |= WDCF_DMA_WAIT;
|
|
}
|
|
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
|
|
chp->ch_flags |= WDCF_IRQ_WAIT;
|
|
}
|
|
return 1;
|
|
|
|
case PHASE_DATAOUT:
|
|
/* write data */
|
|
WDCDEBUG_PRINT(("PHASE_DATAOUT\n"), DEBUG_INTR);
|
|
if ((sc_xfer->xs_control & XS_CTL_DATA_OUT) == 0 ||
|
|
(xfer->c_flags & C_DMA) != 0) {
|
|
printf("wdc_atapi_intr: bad data phase DATAOUT\n");
|
|
if (xfer->c_flags & C_DMA) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
if (xfer->c_bcount < len) {
|
|
printf("wdc_atapi_intr: warning: write only "
|
|
"%d of %d requested bytes\n", xfer->c_bcount, len);
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
|
|
bus_space_write_multi_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
xfer->c_bcount >> 1);
|
|
} else {
|
|
bus_space_write_multi_stream_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
xfer->c_bcount >> 1);
|
|
}
|
|
for (i = xfer->c_bcount; i < len; i += 2)
|
|
bus_space_write_2(chp->cmd_iot, chp->cmd_ioh,
|
|
wd_data, 0);
|
|
xfer->c_skip += xfer->c_bcount;
|
|
xfer->c_bcount = 0;
|
|
} else {
|
|
if (drvp->drive_flags & DRIVE_CAP32) {
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
|
|
bus_space_write_multi_4(chp->data32iot,
|
|
chp->data32ioh, 0,
|
|
(u_int32_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 2);
|
|
else
|
|
bus_space_write_multi_stream_4(chp->data32iot,
|
|
chp->data32ioh, wd_data,
|
|
(u_int32_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 2);
|
|
|
|
xfer->c_skip += len & 0xfffffffc;
|
|
xfer->c_bcount -= len & 0xfffffffc;
|
|
len = len & 0x03;
|
|
}
|
|
if (len > 0) {
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
|
|
bus_space_write_multi_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 1);
|
|
else
|
|
bus_space_write_multi_stream_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 1);
|
|
xfer->c_skip += len;
|
|
xfer->c_bcount -= len;
|
|
}
|
|
}
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
|
|
chp->ch_flags |= WDCF_IRQ_WAIT;
|
|
}
|
|
return 1;
|
|
|
|
case PHASE_DATAIN:
|
|
/* Read data */
|
|
WDCDEBUG_PRINT(("PHASE_DATAIN\n"), DEBUG_INTR);
|
|
if (((sc_xfer->xs_control & XS_CTL_DATA_IN) == 0 &&
|
|
(xfer->c_flags & C_SENSE) == 0) ||
|
|
(xfer->c_flags & C_DMA) != 0) {
|
|
printf("wdc_atapi_intr: bad data phase DATAIN\n");
|
|
if (xfer->c_flags & C_DMA) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
if (xfer->c_bcount < len) {
|
|
printf("wdc_atapi_intr: warning: reading only "
|
|
"%d of %d bytes\n", xfer->c_bcount, len);
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
|
|
bus_space_read_multi_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
xfer->c_bcount >> 1);
|
|
} else {
|
|
bus_space_read_multi_stream_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
xfer->c_bcount >> 1);
|
|
}
|
|
wdcbit_bucket(chp, len - xfer->c_bcount);
|
|
xfer->c_skip += xfer->c_bcount;
|
|
xfer->c_bcount = 0;
|
|
} else {
|
|
if (drvp->drive_flags & DRIVE_CAP32) {
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
|
|
bus_space_read_multi_4(chp->data32iot,
|
|
chp->data32ioh, 0,
|
|
(u_int32_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 2);
|
|
else
|
|
bus_space_read_multi_stream_4(chp->data32iot,
|
|
chp->data32ioh, wd_data,
|
|
(u_int32_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 2);
|
|
|
|
xfer->c_skip += len & 0xfffffffc;
|
|
xfer->c_bcount -= len & 0xfffffffc;
|
|
len = len & 0x03;
|
|
}
|
|
if (len > 0) {
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
|
|
bus_space_read_multi_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 1);
|
|
else
|
|
bus_space_read_multi_stream_2(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_data,
|
|
(u_int16_t *)((char *)xfer->databuf +
|
|
xfer->c_skip),
|
|
len >> 1);
|
|
xfer->c_skip += len;
|
|
xfer->c_bcount -=len;
|
|
}
|
|
}
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
|
|
chp->ch_flags |= WDCF_IRQ_WAIT;
|
|
}
|
|
return 1;
|
|
|
|
case PHASE_ABORTED:
|
|
case PHASE_COMPLETED:
|
|
WDCDEBUG_PRINT(("PHASE_COMPLETED\n"), DEBUG_INTR);
|
|
/* turn off DMA channel */
|
|
if (xfer->c_flags & C_DMA) {
|
|
if (xfer->c_flags & C_SENSE)
|
|
xfer->c_bcount -=
|
|
sizeof(sc_xfer->sense.scsi_sense);
|
|
else
|
|
xfer->c_bcount -= sc_xfer->datalen;
|
|
}
|
|
if (xfer->c_flags & C_SENSE) {
|
|
if ((chp->ch_status & WDCS_ERR) ||
|
|
(chp->wdc->dma_status &
|
|
(WDC_DMAST_NOIRQ | WDC_DMAST_ERR))) {
|
|
/*
|
|
* request sense failed ! it's not suppossed
|
|
* to be possible
|
|
*/
|
|
if (xfer->c_flags & C_DMA) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
sc_xfer->error = XS_RESET;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return (1);
|
|
} else if (xfer->c_bcount <
|
|
sizeof(sc_xfer->sense.scsi_sense)) {
|
|
/* use the sense we just read */
|
|
sc_xfer->error = XS_SENSE;
|
|
} else {
|
|
/*
|
|
* command completed, but no data was read.
|
|
* use the short sense we saved previsouly.
|
|
*/
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
}
|
|
} else {
|
|
sc_xfer->resid = xfer->c_bcount;
|
|
if (chp->ch_status & WDCS_ERR) {
|
|
/* save the short sense */
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = chp->ch_error;
|
|
if ((sc_xfer->sc_link->quirks &
|
|
ADEV_NOSENSE) == 0) {
|
|
/*
|
|
* let the driver issue a
|
|
* 'request sense'
|
|
*/
|
|
xfer->databuf = &sc_xfer->sense;
|
|
xfer->c_bcount =
|
|
sizeof(sc_xfer->sense.scsi_sense);
|
|
xfer->c_skip = 0;
|
|
xfer->c_flags |= C_SENSE;
|
|
callout_stop(&chp->ch_callout);
|
|
wdc_atapi_start(chp, xfer);
|
|
return 1;
|
|
}
|
|
} else if (chp->wdc->dma_status &
|
|
(WDC_DMAST_NOIRQ | WDC_DMAST_ERR)) {
|
|
ata_dmaerr(drvp);
|
|
sc_xfer->error = XS_RESET;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return (1);
|
|
}
|
|
}
|
|
if (xfer->c_bcount != 0) {
|
|
WDCDEBUG_PRINT(("wdc_atapi_intr: bcount value is "
|
|
"%d after io\n", xfer->c_bcount), DEBUG_XFERS);
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
if (xfer->c_bcount < 0) {
|
|
printf("wdc_atapi_intr warning: bcount value "
|
|
"is %d after io\n", xfer->c_bcount);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
default:
|
|
if (++retries<500) {
|
|
DELAY(100);
|
|
chp->ch_status = bus_space_read_1(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_status);
|
|
chp->ch_error = bus_space_read_1(chp->cmd_iot,
|
|
chp->cmd_ioh, wd_error);
|
|
goto again;
|
|
}
|
|
printf("wdc_atapi_intr: unknown phase 0x%x\n", phase);
|
|
if (chp->ch_status & WDCS_ERR) {
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = chp->ch_error;
|
|
} else {
|
|
if (xfer->c_flags & C_DMA) {
|
|
ata_dmaerr(drvp);
|
|
}
|
|
sc_xfer->error = XS_RESET;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return (1);
|
|
}
|
|
}
|
|
WDCDEBUG_PRINT(("wdc_atapi_intr: wdc_atapi_done() (end), error 0x%x "
|
|
"sense 0x%x\n", sc_xfer->error, sc_xfer->sense.atapi_sense),
|
|
DEBUG_INTR);
|
|
wdc_atapi_done(chp, xfer);
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
wdc_atapi_ctrl(chp, xfer, irq)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
int irq;
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
|
|
char *errstring = NULL;
|
|
int delay = (irq == 0) ? ATAPI_DELAY : 0;
|
|
|
|
/* Ack interrupt done in wait_for_unbusy */
|
|
again:
|
|
WDCDEBUG_PRINT(("wdc_atapi_ctrl %s:%d:%d state %d\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive, drvp->state),
|
|
DEBUG_INTR | DEBUG_FUNCS);
|
|
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
|
|
WDSD_IBM | (xfer->drive << 4));
|
|
switch (drvp->state) {
|
|
case PIOMODE:
|
|
/* Don't try to set mode if controller can't be adjusted */
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_MODE) == 0)
|
|
goto ready;
|
|
/* Also don't try if the drive didn't report its mode */
|
|
if ((drvp->drive_flags & DRIVE_MODE) == 0)
|
|
goto ready;
|
|
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
|
|
0x08 | drvp->PIO_mode, WDSF_SET_MODE);
|
|
drvp->state = PIOMODE_WAIT;
|
|
break;
|
|
case PIOMODE_WAIT:
|
|
errstring = "piomode";
|
|
if (wait_for_unbusy(chp, delay))
|
|
goto timeout;
|
|
if (chp->wdc->cap & WDC_CAPABILITY_IRQACK)
|
|
chp->wdc->irqack(chp);
|
|
if (chp->ch_status & WDCS_ERR) {
|
|
if (chp->ch_error == WDCE_ABRT) {
|
|
/*
|
|
* some ATAPI drives rejects pio settings.
|
|
* all we can do here is fall back to PIO 0
|
|
*/
|
|
drvp->drive_flags &= ~DRIVE_MODE;
|
|
drvp->drive_flags &= ~(DRIVE_DMA|DRIVE_UDMA);
|
|
drvp->PIO_mode = 0;
|
|
drvp->DMA_mode = 0;
|
|
printf("%s:%d:%d: pio setting rejected, "
|
|
"falling back to PIO mode 0\n",
|
|
chp->wdc->sc_dev.dv_xname,
|
|
chp->channel, xfer->drive);
|
|
chp->wdc->set_modes(chp);
|
|
goto ready;
|
|
}
|
|
goto error;
|
|
}
|
|
/* fall through */
|
|
|
|
case DMAMODE:
|
|
if (drvp->drive_flags & DRIVE_UDMA) {
|
|
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
|
|
0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
|
|
} else if (drvp->drive_flags & DRIVE_DMA) {
|
|
wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
|
|
0x20 | drvp->DMA_mode, WDSF_SET_MODE);
|
|
} else {
|
|
goto ready;
|
|
}
|
|
drvp->state = DMAMODE_WAIT;
|
|
break;
|
|
case DMAMODE_WAIT:
|
|
errstring = "dmamode";
|
|
if (wait_for_unbusy(chp, delay))
|
|
goto timeout;
|
|
if (chp->wdc->cap & WDC_CAPABILITY_IRQACK)
|
|
chp->wdc->irqack(chp);
|
|
if (chp->ch_status & WDCS_ERR)
|
|
goto error;
|
|
/* fall through */
|
|
|
|
case READY:
|
|
ready:
|
|
drvp->state = READY;
|
|
xfer->c_intr = wdc_atapi_intr;
|
|
callout_stop(&chp->ch_callout);
|
|
wdc_atapi_start(chp, xfer);
|
|
return 1;
|
|
}
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
|
|
chp->ch_flags |= WDCF_IRQ_WAIT;
|
|
xfer->c_intr = wdc_atapi_ctrl;
|
|
} else {
|
|
goto again;
|
|
}
|
|
return 1;
|
|
|
|
timeout:
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
|
|
return 0; /* IRQ was not for us */
|
|
}
|
|
printf("%s:%d:%d: %s timed out\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, errstring);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
error:
|
|
printf("%s:%d:%d: %s ",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
|
|
errstring);
|
|
printf("error (0x%x)\n", chp->ch_error);
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = chp->ch_error;
|
|
wdc_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
wdc_atapi_done(chp, xfer)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
|
|
WDCDEBUG_PRINT(("wdc_atapi_done %s:%d:%d: flags 0x%x\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
|
|
(u_int)xfer->c_flags), DEBUG_XFERS);
|
|
callout_stop(&chp->ch_callout);
|
|
/* remove this command from xfer queue */
|
|
wdc_free_xfer(chp, xfer);
|
|
sc_xfer->xs_status |= XS_STS_DONE;
|
|
|
|
WDCDEBUG_PRINT(("wdc_atapi_done: scsipi_done\n"), DEBUG_XFERS);
|
|
scsipi_done(sc_xfer);
|
|
WDCDEBUG_PRINT(("wdcstart from wdc_atapi_done, flags 0x%x\n",
|
|
chp->ch_flags), DEBUG_XFERS);
|
|
wdcstart(chp);
|
|
}
|
|
|
|
void
|
|
wdc_atapi_reset(chp, xfer)
|
|
struct channel_softc *chp;
|
|
struct wdc_xfer *xfer;
|
|
{
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
|
|
struct scsipi_xfer *sc_xfer = xfer->cmd;
|
|
|
|
wdccommandshort(chp, xfer->drive, ATAPI_SOFT_RESET);
|
|
drvp->state = 0;
|
|
if (wait_for_unbusy(chp, WDC_RESET_WAIT) != 0) {
|
|
printf("%s:%d:%d: reset failed\n",
|
|
chp->wdc->sc_dev.dv_xname, chp->channel,
|
|
xfer->drive);
|
|
sc_xfer->error = XS_SELTIMEOUT;
|
|
}
|
|
wdc_atapi_done(chp, xfer);
|
|
return;
|
|
}
|