NetBSD/sys/dev/mii/iophyreg.h

75 lines
3.3 KiB
C

/* $NetBSD* */
/*
* Copyright (c) 1998, 1999 Soren S. Jorvang.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _DEV_MII_IOPHYREG_H_
#define _DEV_MII_IOPHYREG_H_
/*
* Intel 82553 PHY registers
*/
#define MII_IOPHY_EXT0 0x10 /* Extended Register 0 */
#define EXT0_JABDIS 0x8000 /* jabber disabled */
#define EXT0_LINKDIS 0x4000 /* link integrity disable */
#define EXT0_TEST4 0x2000
#define EXT0_TEST3 0x1000
#define EXT0_TEST2 0x0800
#define EXT0_TEST1 0x0400
#define EXT0_TEST0 0x0200
#define EXT0_FORCE100 0x0100 /* force 100 Mbps operation */
#define EXT0_REVMASK 0x00e0 /* 82553 chip revision */
#define EXT0_HSQ 0x0010
#define EXT0_LSQ 0x0008
#define EXT0_WAKEUP 0x0004 /* disable auto power-down */
#define EXT0_SPEED 0x0002 /* current speed 10/100 */
#define EXT0_DUPLEX 0x0001 /* current duplex setting */
#define MII_IOPHY_EXT1 0x14 /* Extended Register 1 */
#define EXT1_PAIR_SKEW_ERR 0x8000 /* pair skew error */
#define EXT1_DC_BALANCE_ERR 0x4000 /* DC balance error */
#define EXT1_INVALID_CODE_ERR 0x2000 /* invalid code error */
#define EXT1_BAD_CODE_ERR 0x1000 /* bad code error */
#define EXT1_EOP_ERR 0x0800 /* EOP error */
#define EXT1_MANCHESTER_ERR 0x0400 /* Manchester code error */
#define EXT1_CH2_EOF_ERR 0x0200 /* channel 2 EOF detection error */
#define EXT1_DTE_MODE_SEL 0x0100 /* external DTE mode */
#define EXT1_LINE_RPTR_MODE_SEL 0x0080 /* line repeater mode */
#define EXT1_EXT_TEST_MODE_SEL 0x0040 /* external test mode */
#define EXT1_MII_RPTR_MODE_SEL 0x0020 /* MII repeater mode */
#define EXT1_CH2_POLARITY_ERR 0x0010 /* channel 2 polarity error */
#define EXT1_CH3_POLARITY_ERR 0x0008 /* channel 3 polarity error */
#define EXT1_CH4_POLARITY_ERR 0x0004 /* channel 4 polarity error */
#define EXT1_CH2_SFD_DETECT_ERR 0x0002 /* channel 2 SFD not found */
#define MII_IOPHY_EXT2 0x15 /* Extended Register 2 (C step only) */
#define EXT2_AUTONEG_SEL 0x8000 /* autonegotiation selected */
#define EXT2_CH3_SFD_ERR 0x4000 /* channel 3 SFD not found */
#define EXT2_CH4_SFD_ERR 0x2000 /* channel 4 SFD not found */
#endif /* _DEV_MII_IOPHYREG_H_ */