Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/seeq8005.c

1311 lines
32 KiB
C
Raw Blame History

/* $NetBSD: seeq8005.c,v 1.3 2000/09/23 15:13:02 bjh21 Exp $ */
/*
* Copyright (c) 2000 Ben Harris
* Copyright (c) 1995 Mark Brinicombe
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* seeq8005.c - SEEQ 8005 device driver
*/
/*
* This driver currently supports the following chip:
* SEEQ 8005 Advanced Ethernet Data Link Controller
*/
/*
* This driver is based on the arm32 ea(4) driver, hence the names of many
* of the functions.
*/
/*
* Bugs/possible improvements:
* - Does not currently support DMA
* - Does not currently support multicasts
* - Does not transmit multiple packets in one go
* - Does not support big-endian hosts
* - Does not support 8-bit busses
*/
#include "opt_inet.h"
#include "opt_ns.h"
#include <sys/types.h>
#include <sys/param.h>
__RCSID("$NetBSD: seeq8005.c,v 1.3 2000/09/23 15:13:02 bjh21 Exp $");
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_ether.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_inarp.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#include "bpfilter.h"
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/ic/seeq8005reg.h>
#include <dev/ic/seeq8005var.h>
#ifndef EA_TIMEOUT
#define EA_TIMEOUT 60
#endif
#define EA_TX_BUFFER_SIZE 0x4000
#define EA_RX_BUFFER_SIZE 0xC000
/*#define EA_TX_DEBUG*/
/*#define EA_RX_DEBUG*/
/*#define EA_DEBUG*/
/*#define EA_PACKET_DEBUG*/
/* for debugging convenience */
#ifdef EA_DEBUG
#define dprintf(x) printf x
#else
#define dprintf(x)
#endif
/*
* prototypes
*/
static int ea_init(struct seeq8005_softc *);
static int ea_ioctl(struct ifnet *, u_long, caddr_t);
static void ea_start(struct ifnet *);
static void ea_watchdog(struct ifnet *);
static void ea_chipreset(struct seeq8005_softc *);
static void ea_ramtest(struct seeq8005_softc *);
static int ea_stoptx(struct seeq8005_softc *);
static int ea_stoprx(struct seeq8005_softc *);
static void ea_stop(struct seeq8005_softc *);
static void ea_await_fifo_empty(struct seeq8005_softc *);
static void ea_await_fifo_full(struct seeq8005_softc *);
static void ea_writebuf(struct seeq8005_softc *, u_char *, u_int, size_t);
static void ea_readbuf(struct seeq8005_softc *, u_char *, u_int, size_t);
static void ea_select_buffer(struct seeq8005_softc *, int);
static void earead(struct seeq8005_softc *, int, int);
static struct mbuf *eaget(struct seeq8005_softc *, int, int, struct ifnet *);
static void eagetpackets(struct seeq8005_softc *);
static void eatxpacket(struct seeq8005_softc *);
#ifdef EA_PACKET_DEBUG
void ea_dump_buffer(struct seeq8005_softc *, int);
#endif
#ifdef EA_PACKET_DEBUG
/*
* Dump the interface buffer
*/
void
ea_dump_buffer(struct seeq8005_softc *sc, u_int offset)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int addr;
int loop;
size_t size;
int ctrl;
int ptr;
addr = offset;
do {
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_FIFO_READ);
bus_space_write_2(iot, ioh, EA_8005_CONFIG1,
sc->sc_config1 | EA_BUFCODE_LOCAL_MEM);
bus_space_write_2(iot, ioh, EA_8005_DMA_ADDR, addr);
ptr = bus_space_read_2(iot, ioh, EA_8005_BUFWIN);
ctrl = bus_space_read_2(iot, ioh, EA_8005_BUFWIN);
ptr = ((ptr & 0xff) << 8) | ((ptr >> 8) & 0xff);
if (ptr == 0) break;
size = ptr - addr;
printf("addr=%04x size=%04x ", addr, size);
printf("cmd=%02x st=%02x\n", ctrl & 0xff, ctrl >> 8);
for (loop = 0; loop < size - 4; loop += 2)
printf("%04x ",
bus_space_read_2(iot, ioh, EA_8005_BUFWIN));
printf("\n");
addr = ptr;
} while (size != 0);
}
#endif
/*
* Attach chip.
*/
void
seeq8005_attach(struct seeq8005_softc *sc, const u_int8_t *myaddr)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_int id;
printf(" address %s", ether_sprintf(myaddr));
/* Stop the board. */
ea_chipreset(sc);
/* Get the product ID */
ea_select_buffer(sc, EA_BUFCODE_PRODUCTID);
id = bus_space_read_2(sc->sc_iot, sc->sc_ioh, EA_8005_BUFWIN);
if ((id & 0xf0) == 0xa0) {
sc->sc_flags |= SEEQ8005_80C04;
printf(", SEEQ 80C04 rev %02x", id);
} else
printf(", SEEQ 8005");
/* Initialise ifnet structure. */
bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
ifp->if_softc = sc;
ifp->if_start = ea_start;
ifp->if_ioctl = ea_ioctl;
ifp->if_watchdog = ea_watchdog;
ifp->if_flags = IFF_BROADCAST | IFF_NOTRAILERS;
/* Now we can attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, myaddr);
/* Finally, attach to bpf filter if it is present. */
#if NBPFILTER > 0
bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header));
#endif
printf("\n");
/* Test the RAM */
ea_ramtest(sc);
}
/*
* Test the RAM on the ethernet card.
*/
void
ea_ramtest(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int loop;
u_int sum = 0;
/* dprintf(("ea_ramtest()\n"));*/
/*
* Test the buffer memory on the board.
* Write simple pattens to it and read them back.
*/
/* Set up the whole buffer RAM for writing */
ea_select_buffer(sc, EA_BUFCODE_TX_EAP);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, (EA_BUFFER_SIZE >> 8) - 1);
bus_space_write_2(iot, ioh, EA_8005_TX_PTR, 0x0000);
bus_space_write_2(iot, ioh, EA_8005_RX_PTR, EA_BUFFER_SIZE - 2);
#define EA_RAMTEST_LOOP(value) \
do { \
/* Set the write start address and write a pattern */ \
ea_writebuf(sc, NULL, 0x0000, 0); \
for (loop = 0; loop < EA_BUFFER_SIZE; loop += 2) \
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, (value)); \
\
/* Set the read start address and verify the pattern */ \
ea_readbuf(sc, NULL, 0x0000, 0); \
for (loop = 0; loop < EA_BUFFER_SIZE; loop += 2) \
if (bus_space_read_2(iot, ioh, EA_8005_BUFWIN) != (value)) \
++sum; \
if (sum != 0) \
dprintf(("sum=%d\n", sum)); \
} while (/*CONSTCOND*/0)
EA_RAMTEST_LOOP(loop);
EA_RAMTEST_LOOP(loop ^ (EA_BUFFER_SIZE - 1));
EA_RAMTEST_LOOP(0xaa55);
EA_RAMTEST_LOOP(0x55aa);
/* Report */
if (sum > 0)
printf("%s: buffer RAM failed self test, %d faults\n",
sc->sc_dev.dv_xname, sum);
}
/*
* Stop the tx interface.
*
* Returns 0 if the tx was already stopped or 1 if it was active
*/
static int
ea_stoptx(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int timeout;
int status;
dprintf(("ea_stoptx()\n"));
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
if (!(status & EA_STATUS_TX_ON))
return 0;
/* Stop any tx and wait for confirmation */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_TX_OFF);
timeout = 20000;
do {
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
} while ((status & EA_STATUS_TX_ON) && --timeout > 0);
if (timeout == 0)
dprintf(("ea_stoptx: timeout waiting for tx termination\n"));
/* Clear any pending tx interrupt */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_TX_INTACK);
return 1;
}
/*
* Stop the rx interface.
*
* Returns 0 if the tx was already stopped or 1 if it was active
*/
static int
ea_stoprx(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int timeout;
int status;
dprintf(("ea_stoprx()\n"));
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
if (!(status & EA_STATUS_RX_ON))
return 0;
/* Stop any rx and wait for confirmation */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_OFF);
timeout = 20000;
do {
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
} while ((status & EA_STATUS_RX_ON) && --timeout > 0);
if (timeout == 0)
dprintf(("ea_stoprx: timeout waiting for rx termination\n"));
/* Clear any pending rx interrupt */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_INTACK);
return 1;
}
/*
* Stop interface.
* Stop all IO and shut the interface down
*/
static void
ea_stop(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
dprintf(("ea_stop()\n"));
/* Stop all IO */
ea_stoptx(sc);
ea_stoprx(sc);
/* Disable rx and tx interrupts */
sc->sc_command &= (EA_CMD_RX_INTEN | EA_CMD_TX_INTEN);
/* Clear any pending interrupts */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_INTACK |
EA_CMD_TX_INTACK | EA_CMD_DMA_INTACK |
EA_CMD_BW_INTACK);
dprintf(("st=%08x", bus_space_read_2(iot, ioh, EA_8005_STATUS)));
/* Cancel any watchdog timer */
sc->sc_ethercom.ec_if.if_timer = 0;
}
/*
* Reset the chip
* Following this the software registers are reset
*/
static void
ea_chipreset(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
dprintf(("ea_chipreset()\n"));
/* Reset the controller. Min of 4us delay here */
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, EA_CFG2_RESET);
delay(4);
sc->sc_command = 0;
sc->sc_config1 = 0;
sc->sc_config2 = 0;
}
/*
* If the DMA FIFO's in write mode, wait for it to empty. Needed when
* switching the FIFO from write to read. We also use it when changing
* the address for writes.
*/
static void
ea_await_fifo_empty(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int timeout;
timeout = 20000;
if ((bus_space_read_2(iot, ioh, EA_8005_STATUS) &
EA_STATUS_FIFO_DIR) != 0)
return; /* FIFO is reading anyway. */
while ((bus_space_read_2(iot, ioh, EA_8005_STATUS) &
EA_STATUS_FIFO_EMPTY) == 0 &&
--timeout > 0)
continue;
}
/*
* Wait for the DMA FIFO to fill before reading from it.
*/
static void
ea_await_fifo_full(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int timeout;
timeout = 20000;
while ((bus_space_read_2(iot, ioh, EA_8005_STATUS) &
EA_STATUS_FIFO_FULL) == 0 &&
--timeout > 0)
continue;
}
/*
* write to the buffer memory on the interface
*
* The buffer address is set to ADDR.
* If len != 0 then data is copied from the address starting at buf
* to the interface buffer.
* BUF must be usable as a u_int16_t *.
* If LEN is odd, it must be safe to overwrite one extra byte.
*/
static void
ea_writebuf(struct seeq8005_softc *sc, u_char *buf, u_int addr, size_t len)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
dprintf(("writebuf: st=%04x\n",
bus_space_read_2(iot, ioh, EA_8005_STATUS)));
#ifdef DIAGNOSTIC
if (__predict_false(!ALIGNED_POINTER(buf, u_int16_t)))
panic("%s: unaligned writebuf", sc->sc_dev.dv_xname);
#endif
if (__predict_false(addr >= EA_BUFFER_SIZE))
panic("%s: writebuf out of range", sc->sc_dev.dv_xname);
/* Assume that copying too much is safe. */
if (len % 2 != 0)
len++;
ea_await_fifo_empty(sc);
ea_select_buffer(sc, EA_BUFCODE_LOCAL_MEM);
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_FIFO_WRITE);
bus_space_write_2(iot, ioh, EA_8005_DMA_ADDR, addr);
if (len > 0)
bus_space_write_multi_2(iot, ioh, EA_8005_BUFWIN,
(u_int16_t *)buf, len / 2);
/* Leave FIFO to empty in the background */
}
/*
* read from the buffer memory on the interface
*
* The buffer address is set to ADDR.
* If len != 0 then data is copied from the interface buffer to the
* address starting at buf.
* BUF must be usable as a u_int16_t *.
* If LEN is odd, it must be safe to overwrite one extra byte.
*/
static void
ea_readbuf(struct seeq8005_softc *sc, u_char *buf, u_int addr, size_t len)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
dprintf(("readbuf: st=%04x addr=%04x len=%d\n",
bus_space_read_2(iot, ioh, EA_8005_STATUS), addr, len));
#ifdef DIAGNOSTIC
if (!ALIGNED_POINTER(buf, u_int16_t))
panic("%s: unaligned readbuf", sc->sc_dev.dv_xname);
#endif
if (addr >= EA_BUFFER_SIZE)
panic("%s: writebuf out of range", sc->sc_dev.dv_xname);
/* Assume that copying too much is safe. */
if (len % 2 != 0)
len++;
ea_await_fifo_empty(sc);
ea_select_buffer(sc, EA_BUFCODE_LOCAL_MEM);
bus_space_write_2(iot, ioh, EA_8005_DMA_ADDR, addr);
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_FIFO_READ);
ea_await_fifo_full(sc);
if (len > 0)
bus_space_read_multi_2(iot, ioh, EA_8005_BUFWIN,
(u_int16_t *)buf, len / 2);
}
static void
ea_select_buffer(struct seeq8005_softc *sc, int bufcode)
{
bus_space_write_2(sc->sc_iot, sc->sc_ioh, EA_8005_CONFIG1,
sc->sc_config1 | bufcode);
}
/*
* Initialize interface.
*
* This should leave the interface in a state for packet reception and
* transmission.
*/
static int
ea_init(struct seeq8005_softc *sc)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s, loop;
dprintf(("ea_init()\n"));
s = splnet();
/* First, reset the board. */
ea_chipreset(sc);
/* Set up defaults for the registers */
sc->sc_command = 0x00;
sc->sc_config1 = 0x00; /* XXX DMA settings? */
#if BYTE_ORDER == BIG_ENDIAN
sc->sc_config2 = EA_CFG2_BYTESWAP
#else
sc->sc_config2 = 0;
#endif
bus_space_write_2(iot, ioh, EA_8005_COMMAND, sc->sc_command);
bus_space_write_2(iot, ioh, EA_8005_CONFIG1, sc->sc_config1);
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
/* Split board memory into Rx and Tx. */
ea_select_buffer(sc, EA_BUFCODE_TX_EAP);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN,
(EA_TX_BUFFER_SIZE >> 8) - 1);
/* Write the station address - the receiver must be off */
ea_select_buffer(sc, EA_BUFCODE_STATION_ADDR0);
for (loop = 0; loop < ETHER_ADDR_LEN; ++loop)
bus_space_write_2(iot, ioh, EA_8005_BUFWIN,
LLADDR(ifp->if_sadl)[loop]);
/* Configure rx. */
dprintf(("Configuring rx...\n"));
if (ifp->if_flags & IFF_PROMISC)
sc->sc_config1 = EA_CFG1_PROMISCUOUS;
else
sc->sc_config1 = EA_CFG1_BROADCAST;
sc->sc_config1 |= EA_CFG1_STATION_ADDR0;
bus_space_write_2(iot, ioh, EA_8005_CONFIG1, sc->sc_config1);
/* Setup the Rx pointers */
sc->sc_rx_ptr = EA_TX_BUFFER_SIZE;
bus_space_write_2(iot, ioh, EA_8005_RX_PTR, sc->sc_rx_ptr);
bus_space_write_2(iot, ioh, EA_8005_RX_END, sc->sc_rx_ptr >> 8);
/* Place a NULL header at the beginning of the receive area */
ea_writebuf(sc, NULL, sc->sc_rx_ptr, 0);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
/* Turn on Rx */
sc->sc_command |= EA_CMD_RX_INTEN;
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_ON);
/* Configure TX. */
dprintf(("Configuring tx...\n"));
bus_space_write_2(iot, ioh, EA_8005_TX_PTR, 0x0000);
sc->sc_config2 |= EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
/* Place a NULL header at the beginning of the transmit area */
ea_writebuf(sc, NULL, 0x0000, 0);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
sc->sc_command |= EA_CMD_TX_INTEN;
bus_space_write_2(iot, ioh, EA_8005_COMMAND, sc->sc_command);
/* TX_ON gets set by ea_txpacket when there's something to transmit. */
/* Set flags appropriately. */
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
dprintf(("init: st=%04x\n",
bus_space_read_2(iot, ioh, EA_8005_STATUS)));
/* And start output. */
ea_start(ifp);
splx(s);
return 0;
}
/*
* Start output on interface. Get datagrams from the queue and output them,
* giving the receiver a chance between datagrams. Call only from splnet or
* interrupt level!
*/
static void
ea_start(struct ifnet *ifp)
{
struct seeq8005_softc *sc = ifp->if_softc;
int s;
s = splnet();
#ifdef EA_TX_DEBUG
dprintf(("ea_start()...\n"));
#endif
/* Don't do anything if output is active. */
if (ifp->if_flags & IFF_OACTIVE)
return;
/* Mark interface as output active */
ifp->if_flags |= IFF_OACTIVE;
/* tx packets */
eatxpacket(sc);
splx(s);
}
/*
* Transfer a packet to the interface buffer and start transmission
*
* Called at splnet()
*/
void
eatxpacket(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct mbuf *m, *m0;
struct ifnet *ifp;
int len, nextpacket;
u_int8_t hdr[4];
ifp = &sc->sc_ethercom.ec_if;
/* Dequeue the next packet. */
IF_DEQUEUE(&ifp->if_snd, m0);
/* If there's nothing to send, return. */
if (!m0) {
ifp->if_flags &= ~IFF_OACTIVE;
sc->sc_config2 |= EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
#ifdef EA_TX_DEBUG
dprintf(("tx finished\n"));
#endif
return;
}
#if NBPFILTER > 0
/* Give the packet to the bpf, if any. */
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif
#ifdef EA_TX_DEBUG
dprintf(("Tx new packet\n"));
#endif
sc->sc_config2 &= ~EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
/*
* Copy the frame to the start of the transmit area on the card,
* leaving four bytes for the transmit header.
*/
len = 0;
for (m = m0; m; m = m->m_next) {
if (m->m_len == 0)
continue;
ea_writebuf(sc, mtod(m, caddr_t), 4 + len, m->m_len);
len += m->m_len;
}
m_freem(m0);
/* If packet size is odd round up to the next 16 bit boundry */
if (len % 2)
++len;
len = max(len, ETHER_MIN_LEN);
if (len > (ETHER_MAX_LEN - ETHER_CRC_LEN))
log(LOG_WARNING, "%s: oversize packet = %d bytes\n",
sc->sc_dev.dv_xname, len);
#if 0 /*def EA_TX_DEBUG*/
dprintf(("ea: xfr pkt length=%d...\n", len));
dprintf(("%s-->", ether_sprintf(sc->sc_pktbuf+6)));
dprintf(("%s\n", ether_sprintf(sc->sc_pktbuf)));
#endif
/* dprintf(("st=%04x\n", bus_space_read_2(iot, ioh, EA_8005_STATUS)));*/
/* Follow it with a NULL packet header */
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
bus_space_write_2(iot, ioh, EA_8005_BUFWIN, 0x0000);
/* Write the packet header */
nextpacket = len + 4;
hdr[0] = (nextpacket >> 8) & 0xff;
hdr[1] = nextpacket & 0xff;
hdr[2] = EA_PKTHDR_TX | EA_PKTHDR_DATA_FOLLOWS |
EA_TXHDR_XMIT_SUCCESS_INT | EA_TXHDR_COLLISION_INT;
hdr[3] = 0; /* Status byte -- will be update by hardware. */
ea_writebuf(sc, hdr, 0x0000, 4);
bus_space_write_2(iot, ioh, EA_8005_TX_PTR, 0x0000);
/* dprintf(("st=%04x\n", bus_space_read_2(iot, ioh, EA_8005_STATUS)));*/
#ifdef EA_PACKET_DEBUG
ea_dump_buffer(sc, 0);
#endif
/* Now transmit the datagram. */
/* dprintf(("st=%04x\n", bus_space_read_2(iot, ioh, EA_8005_STATUS)));*/
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_TX_ON);
#ifdef EA_TX_DEBUG
dprintf(("st=%04x\n", bus_space_read_2(iot, ioh, EA_8005_STATUS)));
dprintf(("tx: queued\n"));
#endif
}
/*
* Ethernet controller interrupt.
*/
int
seeq8005intr(void *arg)
{
struct seeq8005_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int status, s, handled;
u_int8_t txhdr[4];
u_int txstatus;
handled = 0;
dprintf(("eaintr: "));
/* Get the controller status */
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
dprintf(("st=%04x ", status));
/* Tx interrupt ? */
if (status & EA_STATUS_TX_INT) {
dprintf(("txint "));
handled = 1;
/* Acknowledge the interrupt */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_TX_INTACK);
ea_readbuf(sc, txhdr, 0x0000, 4);
#ifdef EA_TX_DEBUG
dprintf(("txstatus=%02x %02x %02x %02x\n",
txhdr[0], txhdr[1], txhdr[2], txhdr[3]));
#endif
txstatus = txhdr[3];
/*
* Did it succeed ? Did we collide ?
*
* The exact proceedure here is not clear. We should get
* an interrupt on a sucessfull tx or on a collision.
* The done flag is set after successfull tx or 16 collisions
* We should thus get a interrupt for each of collision
* and the done bit should not be set. However it does appear
* to be set at the same time as the collision bit ...
*
* So we will count collisions and output errors and will
* assume that if the done bit is set the packet was
* transmitted. Stats may be wrong if 16 collisions occur on
* a packet as the done flag should be set but the packet
* may not have been transmitted. so the output count might
* not require incrementing if the 16 collisions flags is
* set. I don;t know abou this until it happens.
*/
if (txstatus & EA_TXHDR_COLLISION)
ifp->if_collisions++;
else if (txstatus & EA_TXHDR_ERROR_MASK)
ifp->if_oerrors++;
#if 0
if (txstatus & EA_TXHDR_ERROR_MASK)
log(LOG_WARNING, "tx packet error =%02x\n", txstatus);
#endif
if (txstatus & EA_PKTHDR_DONE) {
ifp->if_opackets++;
/* Tx next packet */
s = splnet();
eatxpacket(sc);
splx(s);
}
}
/* Rx interrupt ? */
if (status & EA_STATUS_RX_INT) {
dprintf(("rxint "));
handled = 1;
/* Acknowledge the interrupt */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_INTACK);
/* Install a watchdog timer needed atm to fixed rx lockups */
ifp->if_timer = EA_TIMEOUT;
/* Processes the received packets */
eagetpackets(sc);
#if 0
/* Make sure the receiver is on */
if ((status & EA_STATUS_RX_ON) == 0) {
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_ON);
printf("rxintr: rx is off st=%04x\n",status);
}
#endif
}
#ifdef EA_DEBUG
status = bus_space_read_2(iot, ioh, EA_8005_STATUS);
dprintf(("st=%04x\n", status));
#endif
return handled;
}
void
eagetpackets(struct seeq8005_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int addr;
int len;
int ctrl;
int ptr;
int pack;
int status;
u_int8_t rxhdr[4];
struct ifnet *ifp;
ifp = &sc->sc_ethercom.ec_if;
/* We start from the last rx pointer position */
addr = sc->sc_rx_ptr;
sc->sc_config2 &= ~EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
do {
/* Read rx header */
ea_readbuf(sc, rxhdr, addr, 4);
/* Split the packet header */
ptr = (rxhdr[0] << 8) | rxhdr[1];
ctrl = rxhdr[2];
status = rxhdr[3];
#ifdef EA_RX_DEBUG
dprintf(("addr=%04x ptr=%04x ctrl=%02x status=%02x\n",
addr, ptr, ctrl, status));
#endif
/* Zero packet ptr ? then must be null header so exit */
if (ptr == 0) break;
/* Get packet length */
len = (ptr - addr) - 4;
if (len < 0)
len += EA_RX_BUFFER_SIZE;
#ifdef EA_RX_DEBUG
dprintf(("len=%04x\n", len));
#endif
/* Has the packet rx completed ? if not then exit */
if ((status & EA_PKTHDR_DONE) == 0)
break;
/*
* Did we have any errors? then note error and go to
* next packet
*/
if (__predict_false(status & 0x0f)) {
++ifp->if_ierrors;
log(LOG_WARNING,
"%s: rx packet error (%02x) - dropping packet\n",
sc->sc_dev.dv_xname, status & 0x0f);
sc->sc_config2 |= EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2,
sc->sc_config2);
ea_init(sc);
return;
}
/*
* Is the packet too big ? - this will probably be trapped
* above as a receive error
*/
if (__predict_false(len > (ETHER_MAX_LEN - ETHER_CRC_LEN))) {
++ifp->if_ierrors;
log(LOG_WARNING, "%s: rx packet size error len=%d\n",
sc->sc_dev.dv_xname, len);
sc->sc_config2 |= EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2,
sc->sc_config2);
ea_init(sc);
return;
}
ifp->if_ipackets++;
/* Pass data up to upper levels. */
earead(sc, addr + 4, len);
addr = ptr;
++pack;
} while (len != 0);
sc->sc_config2 |= EA_CFG2_OUTPUT;
bus_space_write_2(iot, ioh, EA_8005_CONFIG2, sc->sc_config2);
#ifdef EA_RX_DEBUG
dprintf(("new rx ptr=%04x\n", addr));
#endif
/* Store new rx pointer */
sc->sc_rx_ptr = addr;
bus_space_write_2(iot, ioh, EA_8005_RX_END, sc->sc_rx_ptr >> 8);
/* Make sure the receiver is on */
bus_space_write_2(iot, ioh, EA_8005_COMMAND,
sc->sc_command | EA_CMD_RX_ON);
}
/*
* Pass a packet up to the higher levels.
*/
static void
earead(struct seeq8005_softc *sc, int addr, int len)
{
register struct ether_header *eh;
struct mbuf *m;
struct ifnet *ifp;
ifp = &sc->sc_ethercom.ec_if;
/* Pull packet off interface. */
m = eaget(sc, addr, len, ifp);
if (m == 0)
return;
eh = mtod(m, struct ether_header *);
#ifdef EA_RX_DEBUG
dprintf(("%s-->", ether_sprintf(eh->ether_shost)));
dprintf(("%s\n", ether_sprintf(eh->ether_dhost)));
#endif
#if NBPFILTER > 0
/*
* Check if there's a BPF listener on this interface.
* If so, hand off the raw packet to bpf.
*/
if (ifp->if_bpf) {
bpf_mtap(ifp->if_bpf, m);
/*
* Note that the interface cannot be in promiscuous mode if
* there are no BPF listeners. And if we are in promiscuous
* mode, we have to check if this packet is really ours.
*/
if ((ifp->if_flags & IFF_PROMISC) &&
!ETHER_IS_MULTICAST(eh->ether_dhost) &&
bcmp(eh->ether_dhost, LLADDR(ifp->if_sadl),
sizeof(eh->ether_dhost)) != 0) {
m_freem(m);
return;
}
}
#endif
(*ifp->if_input)(ifp, m);
}
/*
* Pull read data off a interface. Len is length of data, with local net
* header stripped. We copy the data into mbufs. When full cluster sized
* units are present we copy into clusters.
*/
struct mbuf *
eaget(struct seeq8005_softc *sc, int addr, int totlen, struct ifnet *ifp)
{
struct mbuf *top, **mp, *m;
int len;
u_int cp, epkt;
cp = addr;
epkt = cp + totlen;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
return 0;
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = totlen;
m->m_len = MHLEN;
top = 0;
mp = &top;
while (totlen > 0) {
if (top) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
m_freem(top);
return 0;
}
m->m_len = MLEN;
}
len = min(totlen, epkt - cp);
if (len >= MINCLSIZE) {
MCLGET(m, M_DONTWAIT);
if (m->m_flags & M_EXT)
m->m_len = len = min(len, MCLBYTES);
else
len = m->m_len;
} else {
/*
* Place initial small packet/header at end of mbuf.
*/
if (len < m->m_len) {
if (top == 0 && len + max_linkhdr <= m->m_len)
m->m_data += max_linkhdr;
m->m_len = len;
} else
len = m->m_len;
}
if (top == 0) {
/* Make sure the payload is aligned */
caddr_t newdata = (caddr_t)
ALIGN(m->m_data + sizeof(struct ether_header)) -
sizeof(struct ether_header);
len -= newdata - m->m_data;
m->m_len = len;
m->m_data = newdata;
}
ea_readbuf(sc, mtod(m, u_char *),
cp < EA_BUFFER_SIZE ? cp : cp - EA_RX_BUFFER_SIZE,
len);
cp += len;
*mp = m;
mp = &m->m_next;
totlen -= len;
if (cp == epkt)
cp = addr;
}
return top;
}
/*
* Process an ioctl request. Mostly boilerplate.
*/
static int
ea_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct seeq8005_softc *sc = ifp->if_softc;
struct ifaddr *ifa = (struct ifaddr *)data;
/* struct ifreq *ifr = (struct ifreq *)data;*/
int s, error = 0;
s = splnet();
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
dprintf(("if_flags=%08x\n", ifp->if_flags));
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
arp_ifinit(ifp, ifa);
dprintf(("Interface ea is coming up (AF_INET)\n"));
ea_init(sc);
break;
#endif
#ifdef NS
/* XXX - This code is probably wrong. */
case AF_NS:
{
register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
if (ns_nullhost(*ina))
ina->x_host =
*(union ns_host *)LLADDR(ifp->if_sadl);
else
bcopy(ina->x_host.c_host,
LLADDR(ifp->if_sadl), ETHER_ADDR_LEN);
/* Set new address. */
dprintf(("Interface ea is coming up (AF_NS)\n"));
ea_init(sc);
break;
}
#endif
default:
dprintf(("Interface ea is coming up (default)\n"));
ea_init(sc);
break;
}
break;
case SIOCSIFFLAGS:
dprintf(("if_flags=%08x\n", ifp->if_flags));
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_flags & IFF_RUNNING) != 0) {
/*
* If interface is marked down and it is running, then
* stop it.
*/
dprintf(("Interface ea is stopping\n"));
ea_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_flags & IFF_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
dprintf(("Interface ea is restarting(1)\n"));
ea_init(sc);
} else {
/*
* Some other important flag might have changed, so
* reset.
*/
dprintf(("Interface ea is reinitialising\n"));
ea_init(sc);
}
break;
default:
error = EINVAL;
break;
}
splx(s);
return error;
}
/*
* Device timeout routine.
*
* Ok I am not sure exactly how the device timeout should work....
* Currently what will happens is that that the device timeout is only
* set when a packet it received. This indicates we are on an active
* network and thus we should expect more packets. If non arrive in
* in the timeout period then we reinitialise as we may have jammed.
* We zero the timeout at this point so that we don't end up with
* an endless stream of timeouts if the network goes down.
*/
static void
ea_watchdog(struct ifnet *ifp)
{
struct seeq8005_softc *sc = ifp->if_softc;
log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
ifp->if_oerrors++;
dprintf(("ea_watchdog: "));
dprintf(("st=%04x\n",
bus_space_read_2(sc->sc_iot, sc->sc_ioh, EA_8005_STATUS)));
/* Kick the interface */
ea_init(sc);
/* ifp->if_timer = EA_TIMEOUT;*/
ifp->if_timer = 0;
}
/* End of if_ea.c */
Reference in New Issue View Git Blame Copy Permalink