NetBSD/sys/arch/i386/isa/ic/cd1400.h

122 lines
4.9 KiB
C

/*
* cyclades cyclom-y serial driver
* Andrew Herbert <andrew@werple.apana.org.au>, 17 August 1993
*
* Copyright (c) 1993 Andrew Herbert.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name Andrew Herbert may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#define CD1400_NO_OF_CHANNELS 4 /* four serial channels per chip */
#define CD1400_FIFOSIZE 12 /* 12 chars */
/* register definitions */
#define CD1400_CCR 2*0x05 /* channel control */
#define CD1400_CMD_RESET 0x81 /* full reset */
#define CD1400_SRER 2*0x06 /* service request enable */
#define CD1400_GFRCR 2*0x40 /* global firmware revision code */
#define CD1400_LIVR 2*0x18 /* local intr vector */
#define CD1400_MIVR 2*0x41 /* modem intr vector */
#define CD1400_TIVR 2*0x42 /* transmit intr vector */
#define CD1400_RIVR 2*0x43 /* receive intr vector */
#define CD1400_RIVR_EXCEPTION (1<<2) /* receive exception bit */
#define CD1400_RICR 2*0x44 /* receive intr channel */
#define CD1400_TICR 2*0x45 /* transmit intr channel */
#define CD1400_MICR 2*0x46 /* modem intr channel */
#define CD1400_RDCR 2*0x0e /* rx data count */
#define CD1400_EOSRR 2*0x60 /* end of service request */
#define CD1400_RDSR 2*0x62 /* rx data/status */
#define CD1400_RDSR_OVERRUN (1<<0) /* rx overrun error */
#define CD1400_RDSR_FRAMING (1<<1) /* rx framing error */
#define CD1400_RDSR_PARITY (1<<2) /* rx parity error */
#define CD1400_RDSR_BREAK (1<<3) /* rx break */
#define CD1400_RDSR_SPECIAL (7<<4) /* rx special char */
#define CD1400_RDSR_SPECIAL_SHIFT 4 /* rx special char shift */
#define CD1400_RDSR_TIMEOUT (1<<7) /* rx timeout */
#define CD1400_TDR 2*0x63 /* tx data */
#define CD1400_MISR 2*0x4c /* modem intr status */
#define CD1400_MISR_DSRd (1<<7) /* DSR delta */
#define CD1400_MISR_CTSd (1<<6) /* CTS delta */
#define CD1400_MISR_RId (1<<5) /* RI delta */
#define CD1400_MISR_CDd (1<<4) /* CD delta */
#define CD1400_MSVR 2*0x6d /* modem signals */
#define CD1400_MSVR_DSR (1<<7) /* !DSR line */
#define CD1400_MSVR_CTS (1<<6) /* !CTS line */
#define CD1400_MSVR_RI (1<<5) /* !RI line */
#define CD1400_MSVR_CD (1<<4) /* !CD line */
#define CD1400_MSVR_DTR (1<<1) /* DTR line */
#define CD1400_DTR 2*0x6d /* dtr control */
#define CD1400_DTR_CLEAR 0
#define CD1400_DTR_SET (1<<1)
#define CD1400_PPR 2*0x7e
#define CD1400_CLOCK_25_1MS 0x31
#define CD1400_CAR 2*0x68 /* channel access */
#define CD1400_RIR 2*0x6B /* receive interrupt status */
#define CD1400_TIR 2*0x6A /* transmit interrupt status */
#define CD1400_MIR 2*0x69 /* modem interrupt status */
#define CD1400_RBPR 2*0x78 /* receive baud rate period */
#define CD1400_RCOR 2*0x7C /* receive clock option */
#define CD1400_TBPR 2*0x72 /* transmit baud rate period */
#define CD1400_TCOR 2*0x76 /* transmit clock option */
#define CD1400_COR1 2*0x08 /* channel option 1 */
#define CD1400_COR2 2*0x09 /* channel option 2 */
#define CD1400_COR3 2*0x0A /* channel option 3 */
#define CD1400_COR4 2*0x1E /* channel option 4 */
#define CD1400_COR5 2*0x1F /* channel option 5 */
#define CD1400_SCHR1 2*0x1A /* special character 1 */
#define CD1400_SCHR2 2*0x1B /* special character 2 */
#define CD1400_SCHR3 2*0x1C /* special character 3 */
#define CD1400_SCHR4 2*0x1D /* special character 4 */
#define CD1400_MCOR1 2*0x15 /* modem change 1 */
#define CD1400_MCOR2 2*0x16 /* modem change 2 */
#define CD1400_RTPR 2*0x21 /* receive timeout period */
#define CD1400_SVRR 2*0x67 /* service request */
#define CD1400_SVRR_RX (1<<0)
#define CD1400_SVRR_TX (1<<1)
#define CD1400_SVRR_MDM (1<<2)
/* hardware SVCACK addresses, for use in interrupt handlers */
#define CD1400_SVCACKR 0x100
#define CD1400_SVCACKT 0x200
#define CD1400_SVCACKM 0x300