NetBSD/sys/arch/hp300/include/cpu.h

266 lines
8.2 KiB
C

/* $NetBSD: cpu.h,v 1.28 1998/02/13 07:41:51 scottr Exp $ */
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1982, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: cpu.h 1.16 91/03/25$
*
* @(#)cpu.h 8.4 (Berkeley) 1/5/94
*/
#ifndef _HP300_CPU_H_
#define _HP300_CPU_H_
/*
* Exported definitions unique to hp300/68k cpu support.
*/
/*
* Get common m68k CPU definitions.
*/
#include <m68k/cpu.h>
/*
* Get interrupt glue.
*/
#include <machine/intr.h>
/*
* definitions of cpu-dependent requirements
* referenced in generic code
*/
#define cpu_swapin(p) /* nothing */
#define cpu_wait(p) /* nothing */
#define cpu_swapout(p) /* nothing */
/*
* Arguments to hardclock and gatherstats encapsulate the previous
* machine state in an opaque clockframe. One the hp300, we use
* what the hardware pushes on an interrupt (frame format 0).
*/
struct clockframe {
u_short sr; /* sr at time of interrupt */
u_long pc; /* pc at time of interrupt */
u_short vo; /* vector offset (4-word frame) */
};
#define CLKF_USERMODE(framep) (((framep)->sr & PSL_S) == 0)
#define CLKF_BASEPRI(framep) (((framep)->sr & PSL_IPL) == 0)
#define CLKF_PC(framep) ((framep)->pc)
#if 0
/* We would like to do it this way... */
#define CLKF_INTR(framep) (((framep)->sr & PSL_M) == 0)
#else
/* but until we start using PSL_M, we have to do this instead */
#define CLKF_INTR(framep) (0) /* XXX */
#endif
/*
* Preempt the current process if in interrupt from user mode,
* or after the current trap/syscall if in system mode.
*/
extern int want_resched; /* resched() was called */
#define need_resched() { want_resched++; aston(); }
/*
* Give a profiling tick to the current process when the user profiling
* buffer pages are invalid. On the hp300, request an ast to send us
* through trap, marking the proc as needing a profiling tick.
*/
#define need_proftick(p) { (p)->p_flag |= P_OWEUPC; aston(); }
/*
* Notify the current process (p) that it has a signal pending,
* process as soon as possible.
*/
#define signotify(p) aston()
extern int astpending; /* need to trap before returning to user mode */
#define aston() (astpending++)
/*
* CTL_MACHDEP definitions.
*/
#define CPU_CONSDEV 1 /* dev_t: console terminal device */
#define CPU_MAXID 2 /* number of valid machdep ids */
#define CTL_MACHDEP_NAMES { \
{ 0, 0 }, \
{ "console_device", CTLTYPE_STRUCT }, \
}
/*
* The rest of this should probably be moved to <machine/hp300spu.h>,
* although some of it could probably be put into generic 68k headers.
*/
#ifdef _KERNEL
extern char *intiobase, *intiolimit;
extern void (*vectab[]) __P((void));
struct frame;
struct fpframe;
struct pcb;
/* locore.s functions */
void m68881_save __P((struct fpframe *));
void m68881_restore __P((struct fpframe *));
void DCIA __P((void));
void DCIS __P((void));
void DCIU __P((void));
void ICIA __P((void));
void ICPA __P((void));
void PCIA __P((void));
void TBIA __P((void));
void TBIS __P((vm_offset_t));
void TBIAS __P((void));
void TBIAU __P((void));
#if defined(M68040)
void DCFA __P((void));
void DCFP __P((vm_offset_t));
void DCFL __P((vm_offset_t));
void DCPL __P((vm_offset_t));
void DCPP __P((vm_offset_t));
void ICPL __P((vm_offset_t));
void ICPP __P((vm_offset_t));
#endif
int suline __P((caddr_t, caddr_t));
void savectx __P((struct pcb *));
void switch_exit __P((struct proc *));
void proc_trampoline __P((void));
void loadustp __P((int));
void doboot __P((void))
__attribute__((__noreturn__));
void ecacheon __P((void));
void ecacheoff __P((void));
/* clock.c functions */
void hp300_calibrate_delay __P((void));
/* machdep.c functions */
int badaddr __P((caddr_t));
int badbaddr __P((caddr_t));
/* sys_machdep.c functions */
int cachectl __P((int, caddr_t, int));
/* vm_machdep.c functions */
void physaccess __P((caddr_t, caddr_t, int, int));
void physunaccess __P((caddr_t, int));
int kvtop __P((caddr_t));
/* what is this supposed to do? i.e. how is it different than startrtclock? */
#define enablertclock()
#endif
/* physical memory sections */
#define ROMBASE (0x00000000)
#define INTIOBASE (0x00400000)
#define INTIOTOP (0x00600000)
#define EXTIOBASE (0x00600000)
#define EXTIOTOP (0x20000000)
#define MAXADDR (0xFFFFF000)
/*
* Internal IO space:
*
* Ranges from 0x400000 to 0x600000 (IIOMAPSIZE).
*
* Internal IO space is mapped in the kernel from ``intiobase'' to
* ``intiolimit'' (defined in locore.s). Since it is always mapped,
* conversion between physical and kernel virtual addresses is easy.
*/
#define ISIIOVA(va) \
((char *)(va) >= intiobase && (char *)(va) < intiolimit)
#define IIOV(pa) ((int)(pa)-INTIOBASE+(int)intiobase)
#define IIOP(va) ((int)(va)-(int)intiobase+INTIOBASE)
#define IIOPOFF(pa) ((int)(pa)-INTIOBASE)
#define IIOMAPSIZE btoc(INTIOTOP-INTIOBASE) /* 2mb */
/*
* External IO space:
*
* DIO ranges from select codes 0-63 at physical addresses given by:
* 0x600000 + (sc - 32) * 0x10000
* DIO cards are addressed in the range 0-31 [0x600000-0x800000) for
* their control space and the remaining areas, [0x200000-0x400000) and
* [0x800000-0x1000000), are for additional space required by a card;
* e.g. a display framebuffer.
*
* DIO-II ranges from select codes 132-255 at physical addresses given by:
* 0x1000000 + (sc - 132) * 0x400000
* The address range of DIO-II space is thus [0x1000000-0x20000000).
*
* DIO/DIO-II space is too large to map in its entirety, instead devices
* are mapped into kernel virtual address space allocated from a range
* of EIOMAPSIZE pages (vmparam.h) starting at ``extiobase''.
*/
#define DIOBASE (0x600000)
#define DIOTOP (0x1000000)
#define DIOCSIZE (0x10000)
#define DIOIIBASE (0x01000000)
#define DIOIITOP (0x20000000)
#define DIOIICSIZE (0x00400000)
/*
* HP MMU
*/
#define MMUBASE IIOPOFF(0x5F4000)
#define MMUSSTP 0x0
#define MMUUSTP 0x4
#define MMUTBINVAL 0x8
#define MMUSTAT 0xC
#define MMUCMD MMUSTAT
#define MMU_UMEN 0x0001 /* enable user mapping */
#define MMU_SMEN 0x0002 /* enable supervisor mapping */
#define MMU_CEN 0x0004 /* enable data cache */
#define MMU_BERR 0x0008 /* bus error */
#define MMU_IEN 0x0020 /* enable instruction cache */
#define MMU_FPE 0x0040 /* enable 68881 FP coprocessor */
#define MMU_WPF 0x2000 /* write protect fault */
#define MMU_PF 0x4000 /* page fault */
#define MMU_PTF 0x8000 /* page table fault */
#define MMU_FAULT (MMU_PTF|MMU_PF|MMU_WPF|MMU_BERR)
#define MMU_ENAB (MMU_UMEN|MMU_SMEN|MMU_IEN|MMU_FPE)
#endif /* _HP300_CPU_H_ */