2412 lines
65 KiB
C
2412 lines
65 KiB
C
/* $NetBSD: sdhc.c,v 1.95 2016/08/10 04:24:17 nonaka Exp $ */
|
|
/* $OpenBSD: sdhc.c,v 1.25 2009/01/13 19:44:20 grange Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2006 Uwe Stuehler <uwe@openbsd.org>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
/*
|
|
* SD Host Controller driver based on the SD Host Controller Standard
|
|
* Simplified Specification Version 1.00 (www.sdcard.com).
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: sdhc.c,v 1.95 2016/08/10 04:24:17 nonaka Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_sdmmc.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/device.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/atomic.h>
|
|
|
|
#include <dev/sdmmc/sdhcreg.h>
|
|
#include <dev/sdmmc/sdhcvar.h>
|
|
#include <dev/sdmmc/sdmmcchip.h>
|
|
#include <dev/sdmmc/sdmmcreg.h>
|
|
#include <dev/sdmmc/sdmmcvar.h>
|
|
|
|
#ifdef SDHC_DEBUG
|
|
int sdhcdebug = 1;
|
|
#define DPRINTF(n,s) do { if ((n) <= sdhcdebug) printf s; } while (0)
|
|
void sdhc_dump_regs(struct sdhc_host *);
|
|
#else
|
|
#define DPRINTF(n,s) do {} while (0)
|
|
#endif
|
|
|
|
#define SDHC_COMMAND_TIMEOUT hz
|
|
#define SDHC_BUFFER_TIMEOUT hz
|
|
#define SDHC_TRANSFER_TIMEOUT hz
|
|
#define SDHC_DMA_TIMEOUT (hz*3)
|
|
#define SDHC_TUNING_TIMEOUT hz
|
|
|
|
struct sdhc_host {
|
|
struct sdhc_softc *sc; /* host controller device */
|
|
|
|
bus_space_tag_t iot; /* host register set tag */
|
|
bus_space_handle_t ioh; /* host register set handle */
|
|
bus_size_t ios; /* host register space size */
|
|
bus_dma_tag_t dmat; /* host DMA tag */
|
|
|
|
device_t sdmmc; /* generic SD/MMC device */
|
|
|
|
u_int clkbase; /* base clock frequency in KHz */
|
|
int maxblklen; /* maximum block length */
|
|
uint32_t ocr; /* OCR value from capabilities */
|
|
|
|
uint8_t regs[14]; /* host controller state */
|
|
|
|
uint16_t intr_status; /* soft interrupt status */
|
|
uint16_t intr_error_status; /* soft error status */
|
|
kmutex_t intr_lock;
|
|
kcondvar_t intr_cv;
|
|
|
|
callout_t tuning_timer;
|
|
int tuning_timing;
|
|
u_int tuning_timer_count;
|
|
u_int tuning_timer_pending;
|
|
|
|
int specver; /* spec. version */
|
|
|
|
uint32_t flags; /* flags for this host */
|
|
#define SHF_USE_DMA 0x0001
|
|
#define SHF_USE_4BIT_MODE 0x0002
|
|
#define SHF_USE_8BIT_MODE 0x0004
|
|
#define SHF_MODE_DMAEN 0x0008 /* needs SDHC_DMA_ENABLE in mode */
|
|
#define SHF_USE_ADMA2_32 0x0010
|
|
#define SHF_USE_ADMA2_64 0x0020
|
|
#define SHF_USE_ADMA2_MASK 0x0030
|
|
|
|
bus_dmamap_t adma_map;
|
|
bus_dma_segment_t adma_segs[1];
|
|
void *adma2;
|
|
};
|
|
|
|
#define HDEVNAME(hp) (device_xname((hp)->sc->sc_dev))
|
|
|
|
static uint8_t
|
|
hread1(struct sdhc_host *hp, bus_size_t reg)
|
|
{
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS))
|
|
return bus_space_read_1(hp->iot, hp->ioh, reg);
|
|
return bus_space_read_4(hp->iot, hp->ioh, reg & -4) >> (8 * (reg & 3));
|
|
}
|
|
|
|
static uint16_t
|
|
hread2(struct sdhc_host *hp, bus_size_t reg)
|
|
{
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS))
|
|
return bus_space_read_2(hp->iot, hp->ioh, reg);
|
|
return bus_space_read_4(hp->iot, hp->ioh, reg & -4) >> (8 * (reg & 2));
|
|
}
|
|
|
|
#define HREAD1(hp, reg) hread1(hp, reg)
|
|
#define HREAD2(hp, reg) hread2(hp, reg)
|
|
#define HREAD4(hp, reg) \
|
|
(bus_space_read_4((hp)->iot, (hp)->ioh, (reg)))
|
|
|
|
|
|
static void
|
|
hwrite1(struct sdhc_host *hp, bus_size_t o, uint8_t val)
|
|
{
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
bus_space_write_1(hp->iot, hp->ioh, o, val);
|
|
} else {
|
|
const size_t shift = 8 * (o & 3);
|
|
o &= -4;
|
|
uint32_t tmp = bus_space_read_4(hp->iot, hp->ioh, o);
|
|
tmp = (val << shift) | (tmp & ~(0xff << shift));
|
|
bus_space_write_4(hp->iot, hp->ioh, o, tmp);
|
|
}
|
|
}
|
|
|
|
static void
|
|
hwrite2(struct sdhc_host *hp, bus_size_t o, uint16_t val)
|
|
{
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
bus_space_write_2(hp->iot, hp->ioh, o, val);
|
|
} else {
|
|
const size_t shift = 8 * (o & 2);
|
|
o &= -4;
|
|
uint32_t tmp = bus_space_read_4(hp->iot, hp->ioh, o);
|
|
tmp = (val << shift) | (tmp & ~(0xffff << shift));
|
|
bus_space_write_4(hp->iot, hp->ioh, o, tmp);
|
|
}
|
|
}
|
|
|
|
#define HWRITE1(hp, reg, val) hwrite1(hp, reg, val)
|
|
#define HWRITE2(hp, reg, val) hwrite2(hp, reg, val)
|
|
#define HWRITE4(hp, reg, val) \
|
|
bus_space_write_4((hp)->iot, (hp)->ioh, (reg), (val))
|
|
|
|
#define HCLR1(hp, reg, bits) \
|
|
do if (bits) HWRITE1((hp), (reg), HREAD1((hp), (reg)) & ~(bits)); while (0)
|
|
#define HCLR2(hp, reg, bits) \
|
|
do if (bits) HWRITE2((hp), (reg), HREAD2((hp), (reg)) & ~(bits)); while (0)
|
|
#define HCLR4(hp, reg, bits) \
|
|
do if (bits) HWRITE4((hp), (reg), HREAD4((hp), (reg)) & ~(bits)); while (0)
|
|
#define HSET1(hp, reg, bits) \
|
|
do if (bits) HWRITE1((hp), (reg), HREAD1((hp), (reg)) | (bits)); while (0)
|
|
#define HSET2(hp, reg, bits) \
|
|
do if (bits) HWRITE2((hp), (reg), HREAD2((hp), (reg)) | (bits)); while (0)
|
|
#define HSET4(hp, reg, bits) \
|
|
do if (bits) HWRITE4((hp), (reg), HREAD4((hp), (reg)) | (bits)); while (0)
|
|
|
|
static int sdhc_host_reset(sdmmc_chipset_handle_t);
|
|
static int sdhc_host_reset1(sdmmc_chipset_handle_t);
|
|
static uint32_t sdhc_host_ocr(sdmmc_chipset_handle_t);
|
|
static int sdhc_host_maxblklen(sdmmc_chipset_handle_t);
|
|
static int sdhc_card_detect(sdmmc_chipset_handle_t);
|
|
static int sdhc_write_protect(sdmmc_chipset_handle_t);
|
|
static int sdhc_bus_power(sdmmc_chipset_handle_t, uint32_t);
|
|
static int sdhc_bus_clock_ddr(sdmmc_chipset_handle_t, int, bool);
|
|
static int sdhc_bus_width(sdmmc_chipset_handle_t, int);
|
|
static int sdhc_bus_rod(sdmmc_chipset_handle_t, int);
|
|
static void sdhc_card_enable_intr(sdmmc_chipset_handle_t, int);
|
|
static void sdhc_card_intr_ack(sdmmc_chipset_handle_t);
|
|
static void sdhc_exec_command(sdmmc_chipset_handle_t,
|
|
struct sdmmc_command *);
|
|
static int sdhc_signal_voltage(sdmmc_chipset_handle_t, int);
|
|
static int sdhc_execute_tuning1(struct sdhc_host *, int);
|
|
static int sdhc_execute_tuning(sdmmc_chipset_handle_t, int);
|
|
static void sdhc_tuning_timer(void *);
|
|
static int sdhc_start_command(struct sdhc_host *, struct sdmmc_command *);
|
|
static int sdhc_wait_state(struct sdhc_host *, uint32_t, uint32_t);
|
|
static int sdhc_soft_reset(struct sdhc_host *, int);
|
|
static int sdhc_wait_intr(struct sdhc_host *, int, int, bool);
|
|
static void sdhc_transfer_data(struct sdhc_host *, struct sdmmc_command *);
|
|
static int sdhc_transfer_data_dma(struct sdhc_host *, struct sdmmc_command *);
|
|
static int sdhc_transfer_data_pio(struct sdhc_host *, struct sdmmc_command *);
|
|
static void sdhc_read_data_pio(struct sdhc_host *, uint8_t *, u_int);
|
|
static void sdhc_write_data_pio(struct sdhc_host *, uint8_t *, u_int);
|
|
static void esdhc_read_data_pio(struct sdhc_host *, uint8_t *, u_int);
|
|
static void esdhc_write_data_pio(struct sdhc_host *, uint8_t *, u_int);
|
|
|
|
static struct sdmmc_chip_functions sdhc_functions = {
|
|
/* host controller reset */
|
|
.host_reset = sdhc_host_reset,
|
|
|
|
/* host controller capabilities */
|
|
.host_ocr = sdhc_host_ocr,
|
|
.host_maxblklen = sdhc_host_maxblklen,
|
|
|
|
/* card detection */
|
|
.card_detect = sdhc_card_detect,
|
|
|
|
/* write protect */
|
|
.write_protect = sdhc_write_protect,
|
|
|
|
/* bus power, clock frequency, width and ROD(OpenDrain/PushPull) */
|
|
.bus_power = sdhc_bus_power,
|
|
.bus_clock = NULL, /* see sdhc_bus_clock_ddr */
|
|
.bus_width = sdhc_bus_width,
|
|
.bus_rod = sdhc_bus_rod,
|
|
|
|
/* command execution */
|
|
.exec_command = sdhc_exec_command,
|
|
|
|
/* card interrupt */
|
|
.card_enable_intr = sdhc_card_enable_intr,
|
|
.card_intr_ack = sdhc_card_intr_ack,
|
|
|
|
/* UHS functions */
|
|
.signal_voltage = sdhc_signal_voltage,
|
|
.bus_clock_ddr = sdhc_bus_clock_ddr,
|
|
.execute_tuning = sdhc_execute_tuning,
|
|
};
|
|
|
|
static int
|
|
sdhc_cfprint(void *aux, const char *pnp)
|
|
{
|
|
const struct sdmmcbus_attach_args * const saa = aux;
|
|
const struct sdhc_host * const hp = saa->saa_sch;
|
|
|
|
if (pnp) {
|
|
aprint_normal("sdmmc at %s", pnp);
|
|
}
|
|
for (size_t host = 0; host < hp->sc->sc_nhosts; host++) {
|
|
if (hp->sc->sc_host[host] == hp) {
|
|
aprint_normal(" slot %zu", host);
|
|
}
|
|
}
|
|
|
|
return UNCONF;
|
|
}
|
|
|
|
/*
|
|
* Called by attachment driver. For each SD card slot there is one SD
|
|
* host controller standard register set. (1.3)
|
|
*/
|
|
int
|
|
sdhc_host_found(struct sdhc_softc *sc, bus_space_tag_t iot,
|
|
bus_space_handle_t ioh, bus_size_t iosize)
|
|
{
|
|
struct sdmmcbus_attach_args saa;
|
|
struct sdhc_host *hp;
|
|
uint32_t caps, caps2;
|
|
uint16_t sdhcver;
|
|
int error;
|
|
|
|
/* Allocate one more host structure. */
|
|
hp = malloc(sizeof(struct sdhc_host), M_DEVBUF, M_WAITOK|M_ZERO);
|
|
if (hp == NULL) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"couldn't alloc memory (sdhc host)\n");
|
|
goto err1;
|
|
}
|
|
sc->sc_host[sc->sc_nhosts++] = hp;
|
|
|
|
/* Fill in the new host structure. */
|
|
hp->sc = sc;
|
|
hp->iot = iot;
|
|
hp->ioh = ioh;
|
|
hp->ios = iosize;
|
|
hp->dmat = sc->sc_dmat;
|
|
|
|
mutex_init(&hp->intr_lock, MUTEX_DEFAULT, IPL_SDMMC);
|
|
cv_init(&hp->intr_cv, "sdhcintr");
|
|
callout_init(&hp->tuning_timer, CALLOUT_MPSAFE);
|
|
callout_setfunc(&hp->tuning_timer, sdhc_tuning_timer, hp);
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
sdhcver = SDHC_SPEC_VERS_300 << SDHC_SPEC_VERS_SHIFT;
|
|
} else if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
sdhcver = HREAD4(hp, SDHC_ESDHC_HOST_CTL_VERSION);
|
|
} else {
|
|
sdhcver = HREAD2(hp, SDHC_HOST_CTL_VERSION);
|
|
}
|
|
aprint_normal_dev(sc->sc_dev, "SDHC ");
|
|
hp->specver = SDHC_SPEC_VERSION(sdhcver);
|
|
switch (SDHC_SPEC_VERSION(sdhcver)) {
|
|
case SDHC_SPEC_VERS_100:
|
|
aprint_normal("1.0");
|
|
break;
|
|
|
|
case SDHC_SPEC_VERS_200:
|
|
aprint_normal("2.0");
|
|
break;
|
|
|
|
case SDHC_SPEC_VERS_300:
|
|
aprint_normal("3.0");
|
|
break;
|
|
|
|
case SDHC_SPEC_VERS_400:
|
|
aprint_normal("4.0");
|
|
break;
|
|
|
|
default:
|
|
aprint_normal("unknown version(0x%x)",
|
|
SDHC_SPEC_VERSION(sdhcver));
|
|
break;
|
|
}
|
|
aprint_normal(", rev %u", SDHC_VENDOR_VERSION(sdhcver));
|
|
|
|
/*
|
|
* Reset the host controller and enable interrupts.
|
|
*/
|
|
(void)sdhc_host_reset(hp);
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
/* init uSDHC registers */
|
|
HWRITE4(hp, SDHC_MMC_BOOT, 0);
|
|
HWRITE4(hp, SDHC_HOST_CTL, SDHC_USDHC_BURST_LEN_EN |
|
|
SDHC_USDHC_HOST_CTL_RESV23 | SDHC_USDHC_EMODE_LE);
|
|
HWRITE4(hp, SDHC_WATERMARK_LEVEL,
|
|
(0x10 << SDHC_WATERMARK_WR_BRST_SHIFT) |
|
|
(0x40 << SDHC_WATERMARK_WRITE_SHIFT) |
|
|
(0x10 << SDHC_WATERMARK_RD_BRST_SHIFT) |
|
|
(0x40 << SDHC_WATERMARK_READ_SHIFT));
|
|
HSET4(hp, SDHC_VEND_SPEC,
|
|
SDHC_VEND_SPEC_MBO |
|
|
SDHC_VEND_SPEC_CARD_CLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_IPG_PERCLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_HCLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_IPG_CLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_AC12_WR_CHKBUSY_EN |
|
|
SDHC_VEND_SPEC_FRC_SDCLK_ON);
|
|
}
|
|
|
|
/* Determine host capabilities. */
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_HOSTCAPS)) {
|
|
caps = sc->sc_caps;
|
|
caps2 = sc->sc_caps2;
|
|
} else if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
/* uSDHC capability register is little bit different */
|
|
caps = HREAD4(hp, SDHC_CAPABILITIES);
|
|
caps |= SDHC_8BIT_SUPP;
|
|
if (caps & SDHC_ADMA1_SUPP)
|
|
caps |= SDHC_ADMA2_SUPP;
|
|
sc->sc_caps = caps;
|
|
/* uSDHC has no SDHC_CAPABILITIES2 register */
|
|
caps2 = sc->sc_caps2 = SDHC_SDR50_SUPP | SDHC_DDR50_SUPP;
|
|
} else {
|
|
caps = sc->sc_caps = HREAD4(hp, SDHC_CAPABILITIES);
|
|
if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
caps2 = sc->sc_caps2 = HREAD4(hp, SDHC_CAPABILITIES2);
|
|
} else {
|
|
caps2 = sc->sc_caps2 = 0;
|
|
}
|
|
}
|
|
|
|
const u_int retuning_mode = (caps2 >> SDHC_RETUNING_MODES_SHIFT) &
|
|
SDHC_RETUNING_MODES_MASK;
|
|
if (retuning_mode == SDHC_RETUNING_MODE_1) {
|
|
hp->tuning_timer_count = (caps2 >> SDHC_TIMER_COUNT_SHIFT) &
|
|
SDHC_TIMER_COUNT_MASK;
|
|
if (hp->tuning_timer_count == 0xf)
|
|
hp->tuning_timer_count = 0;
|
|
if (hp->tuning_timer_count)
|
|
hp->tuning_timer_count =
|
|
1 << (hp->tuning_timer_count - 1);
|
|
}
|
|
|
|
/*
|
|
* Use DMA if the host system and the controller support it.
|
|
* Suports integrated or external DMA egine, with or without
|
|
* SDHC_DMA_ENABLE in the command.
|
|
*/
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_FORCE_DMA) ||
|
|
(ISSET(sc->sc_flags, SDHC_FLAG_USE_DMA &&
|
|
ISSET(caps, SDHC_DMA_SUPPORT)))) {
|
|
SET(hp->flags, SHF_USE_DMA);
|
|
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_USE_ADMA2) &&
|
|
ISSET(caps, SDHC_ADMA2_SUPP)) {
|
|
SET(hp->flags, SHF_MODE_DMAEN);
|
|
/*
|
|
* 64-bit mode was present in the 2.00 spec, removed
|
|
* from 3.00, and re-added in 4.00 with a different
|
|
* descriptor layout. We only support 2.00 and 3.00
|
|
* descriptors for now.
|
|
*/
|
|
if (hp->specver == SDHC_SPEC_VERS_200 &&
|
|
ISSET(caps, SDHC_64BIT_SYS_BUS)) {
|
|
SET(hp->flags, SHF_USE_ADMA2_64);
|
|
aprint_normal(", 64-bit ADMA2");
|
|
} else {
|
|
SET(hp->flags, SHF_USE_ADMA2_32);
|
|
aprint_normal(", 32-bit ADMA2");
|
|
}
|
|
} else {
|
|
if (!ISSET(sc->sc_flags, SDHC_FLAG_EXTERNAL_DMA) ||
|
|
ISSET(sc->sc_flags, SDHC_FLAG_EXTDMA_DMAEN))
|
|
SET(hp->flags, SHF_MODE_DMAEN);
|
|
if (sc->sc_vendor_transfer_data_dma) {
|
|
aprint_normal(", platform DMA");
|
|
} else {
|
|
aprint_normal(", SDMA");
|
|
}
|
|
}
|
|
} else {
|
|
aprint_normal(", PIO");
|
|
}
|
|
|
|
/*
|
|
* Determine the base clock frequency. (2.2.24)
|
|
*/
|
|
if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
hp->clkbase = SDHC_BASE_V3_FREQ_KHZ(caps);
|
|
} else {
|
|
hp->clkbase = SDHC_BASE_FREQ_KHZ(caps);
|
|
}
|
|
if (hp->clkbase == 0 ||
|
|
ISSET(sc->sc_flags, SDHC_FLAG_NO_CLKBASE)) {
|
|
if (sc->sc_clkbase == 0) {
|
|
/* The attachment driver must tell us. */
|
|
aprint_error_dev(sc->sc_dev,
|
|
"unknown base clock frequency\n");
|
|
goto err;
|
|
}
|
|
hp->clkbase = sc->sc_clkbase;
|
|
}
|
|
if (hp->clkbase < 10000 || hp->clkbase > 10000 * 256) {
|
|
/* SDHC 1.0 supports only 10-63 MHz. */
|
|
aprint_error_dev(sc->sc_dev,
|
|
"base clock frequency out of range: %u MHz\n",
|
|
hp->clkbase / 1000);
|
|
goto err;
|
|
}
|
|
aprint_normal(", %u kHz", hp->clkbase);
|
|
|
|
/*
|
|
* XXX Set the data timeout counter value according to
|
|
* capabilities. (2.2.15)
|
|
*/
|
|
HWRITE1(hp, SDHC_TIMEOUT_CTL, SDHC_TIMEOUT_MAX);
|
|
#if 1
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
|
|
HWRITE4(hp, SDHC_NINTR_STATUS, SDHC_CMD_TIMEOUT_ERROR << 16);
|
|
#endif
|
|
|
|
if (ISSET(caps, SDHC_EMBEDDED_SLOT))
|
|
aprint_normal(", embedded slot");
|
|
|
|
/*
|
|
* Determine SD bus voltage levels supported by the controller.
|
|
*/
|
|
aprint_normal(",");
|
|
if (ISSET(caps, SDHC_HIGH_SPEED_SUPP)) {
|
|
SET(hp->ocr, MMC_OCR_HCS);
|
|
aprint_normal(" HS");
|
|
}
|
|
if (ISSET(caps2, SDHC_SDR50_SUPP)) {
|
|
SET(hp->ocr, MMC_OCR_S18A);
|
|
aprint_normal(" SDR50");
|
|
}
|
|
if (ISSET(caps2, SDHC_DDR50_SUPP)) {
|
|
SET(hp->ocr, MMC_OCR_S18A);
|
|
aprint_normal(" DDR50");
|
|
}
|
|
if (ISSET(caps2, SDHC_SDR104_SUPP)) {
|
|
SET(hp->ocr, MMC_OCR_S18A);
|
|
aprint_normal(" SDR104 HS200");
|
|
}
|
|
if (ISSET(caps, SDHC_VOLTAGE_SUPP_1_8V)) {
|
|
SET(hp->ocr, MMC_OCR_1_65V_1_95V);
|
|
aprint_normal(" 1.8V");
|
|
}
|
|
if (ISSET(caps, SDHC_VOLTAGE_SUPP_3_0V)) {
|
|
SET(hp->ocr, MMC_OCR_2_9V_3_0V | MMC_OCR_3_0V_3_1V);
|
|
aprint_normal(" 3.0V");
|
|
}
|
|
if (ISSET(caps, SDHC_VOLTAGE_SUPP_3_3V)) {
|
|
SET(hp->ocr, MMC_OCR_3_2V_3_3V | MMC_OCR_3_3V_3_4V);
|
|
aprint_normal(" 3.3V");
|
|
}
|
|
if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
aprint_normal(", re-tuning mode %d", retuning_mode + 1);
|
|
if (hp->tuning_timer_count)
|
|
aprint_normal(" (%us timer)", hp->tuning_timer_count);
|
|
}
|
|
|
|
/*
|
|
* Determine the maximum block length supported by the host
|
|
* controller. (2.2.24)
|
|
*/
|
|
switch((caps >> SDHC_MAX_BLK_LEN_SHIFT) & SDHC_MAX_BLK_LEN_MASK) {
|
|
case SDHC_MAX_BLK_LEN_512:
|
|
hp->maxblklen = 512;
|
|
break;
|
|
|
|
case SDHC_MAX_BLK_LEN_1024:
|
|
hp->maxblklen = 1024;
|
|
break;
|
|
|
|
case SDHC_MAX_BLK_LEN_2048:
|
|
hp->maxblklen = 2048;
|
|
break;
|
|
|
|
case SDHC_MAX_BLK_LEN_4096:
|
|
hp->maxblklen = 4096;
|
|
break;
|
|
|
|
default:
|
|
aprint_error_dev(sc->sc_dev, "max block length unknown\n");
|
|
goto err;
|
|
}
|
|
aprint_normal(", %u byte blocks", hp->maxblklen);
|
|
aprint_normal("\n");
|
|
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_MASK)) {
|
|
int rseg;
|
|
|
|
/* Allocate ADMA2 descriptor memory */
|
|
error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE,
|
|
PAGE_SIZE, hp->adma_segs, 1, &rseg, BUS_DMA_WAITOK);
|
|
if (error) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"ADMA2 dmamem_alloc failed (%d)\n", error);
|
|
goto adma_done;
|
|
}
|
|
error = bus_dmamem_map(sc->sc_dmat, hp->adma_segs, rseg,
|
|
PAGE_SIZE, (void **)&hp->adma2, BUS_DMA_WAITOK);
|
|
if (error) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"ADMA2 dmamem_map failed (%d)\n", error);
|
|
goto adma_done;
|
|
}
|
|
error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE,
|
|
0, BUS_DMA_WAITOK, &hp->adma_map);
|
|
if (error) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"ADMA2 dmamap_create failed (%d)\n", error);
|
|
goto adma_done;
|
|
}
|
|
error = bus_dmamap_load(sc->sc_dmat, hp->adma_map,
|
|
hp->adma2, PAGE_SIZE, NULL,
|
|
BUS_DMA_WAITOK|BUS_DMA_WRITE);
|
|
if (error) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"ADMA2 dmamap_load failed (%d)\n", error);
|
|
goto adma_done;
|
|
}
|
|
|
|
memset(hp->adma2, 0, PAGE_SIZE);
|
|
|
|
adma_done:
|
|
if (error)
|
|
CLR(hp->flags, SHF_USE_ADMA2_MASK);
|
|
}
|
|
|
|
/*
|
|
* Attach the generic SD/MMC bus driver. (The bus driver must
|
|
* not invoke any chipset functions before it is attached.)
|
|
*/
|
|
memset(&saa, 0, sizeof(saa));
|
|
saa.saa_busname = "sdmmc";
|
|
saa.saa_sct = &sdhc_functions;
|
|
saa.saa_sch = hp;
|
|
saa.saa_dmat = hp->dmat;
|
|
saa.saa_clkmax = hp->clkbase;
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_HAVE_CGM))
|
|
saa.saa_clkmin = hp->clkbase / 256 / 2046;
|
|
else if (ISSET(sc->sc_flags, SDHC_FLAG_HAVE_DVS))
|
|
saa.saa_clkmin = hp->clkbase / 256 / 16;
|
|
else if (hp->sc->sc_clkmsk != 0)
|
|
saa.saa_clkmin = hp->clkbase / (hp->sc->sc_clkmsk >>
|
|
(ffs(hp->sc->sc_clkmsk) - 1));
|
|
else if (hp->specver >= SDHC_SPEC_VERS_300)
|
|
saa.saa_clkmin = hp->clkbase / 0x3ff;
|
|
else
|
|
saa.saa_clkmin = hp->clkbase / 256;
|
|
saa.saa_caps = SMC_CAPS_4BIT_MODE|SMC_CAPS_AUTO_STOP;
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_8BIT_MODE))
|
|
saa.saa_caps |= SMC_CAPS_8BIT_MODE;
|
|
if (ISSET(caps, SDHC_HIGH_SPEED_SUPP))
|
|
saa.saa_caps |= SMC_CAPS_SD_HIGHSPEED;
|
|
if (ISSET(caps2, SDHC_SDR104_SUPP))
|
|
saa.saa_caps |= SMC_CAPS_UHS_SDR104 |
|
|
SMC_CAPS_UHS_SDR50 |
|
|
SMC_CAPS_MMC_HS200;
|
|
if (ISSET(caps2, SDHC_SDR50_SUPP))
|
|
saa.saa_caps |= SMC_CAPS_UHS_SDR50;
|
|
if (ISSET(caps2, SDHC_DDR50_SUPP))
|
|
saa.saa_caps |= SMC_CAPS_UHS_DDR50;
|
|
if (ISSET(hp->flags, SHF_USE_DMA)) {
|
|
saa.saa_caps |= SMC_CAPS_DMA;
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
|
|
saa.saa_caps |= SMC_CAPS_MULTI_SEG_DMA;
|
|
}
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_SINGLE_ONLY))
|
|
saa.saa_caps |= SMC_CAPS_SINGLE_ONLY;
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_POLL_CARD_DET))
|
|
saa.saa_caps |= SMC_CAPS_POLL_CARD_DET;
|
|
hp->sdmmc = config_found(sc->sc_dev, &saa, sdhc_cfprint);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
callout_destroy(&hp->tuning_timer);
|
|
cv_destroy(&hp->intr_cv);
|
|
mutex_destroy(&hp->intr_lock);
|
|
free(hp, M_DEVBUF);
|
|
sc->sc_host[--sc->sc_nhosts] = NULL;
|
|
err1:
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
sdhc_detach(struct sdhc_softc *sc, int flags)
|
|
{
|
|
struct sdhc_host *hp;
|
|
int rv = 0;
|
|
|
|
for (size_t n = 0; n < sc->sc_nhosts; n++) {
|
|
hp = sc->sc_host[n];
|
|
if (hp == NULL)
|
|
continue;
|
|
if (hp->sdmmc != NULL) {
|
|
rv = config_detach(hp->sdmmc, flags);
|
|
if (rv)
|
|
break;
|
|
hp->sdmmc = NULL;
|
|
}
|
|
/* disable interrupts */
|
|
if ((flags & DETACH_FORCE) == 0) {
|
|
mutex_enter(&hp->intr_lock);
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, 0);
|
|
} else {
|
|
HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, 0);
|
|
}
|
|
sdhc_soft_reset(hp, SDHC_RESET_ALL);
|
|
mutex_exit(&hp->intr_lock);
|
|
}
|
|
callout_halt(&hp->tuning_timer, NULL);
|
|
callout_destroy(&hp->tuning_timer);
|
|
cv_destroy(&hp->intr_cv);
|
|
mutex_destroy(&hp->intr_lock);
|
|
if (hp->ios > 0) {
|
|
bus_space_unmap(hp->iot, hp->ioh, hp->ios);
|
|
hp->ios = 0;
|
|
}
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_MASK)) {
|
|
bus_dmamap_unload(sc->sc_dmat, hp->adma_map);
|
|
bus_dmamap_destroy(sc->sc_dmat, hp->adma_map);
|
|
bus_dmamem_unmap(sc->sc_dmat, hp->adma2, PAGE_SIZE);
|
|
bus_dmamem_free(sc->sc_dmat, hp->adma_segs, 1);
|
|
}
|
|
free(hp, M_DEVBUF);
|
|
sc->sc_host[n] = NULL;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
bool
|
|
sdhc_suspend(device_t dev, const pmf_qual_t *qual)
|
|
{
|
|
struct sdhc_softc *sc = device_private(dev);
|
|
struct sdhc_host *hp;
|
|
size_t i;
|
|
|
|
/* XXX poll for command completion or suspend command
|
|
* in progress */
|
|
|
|
/* Save the host controller state. */
|
|
for (size_t n = 0; n < sc->sc_nhosts; n++) {
|
|
hp = sc->sc_host[n];
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
for (i = 0; i < sizeof hp->regs; i += 4) {
|
|
uint32_t v = HREAD4(hp, i);
|
|
hp->regs[i + 0] = (v >> 0);
|
|
hp->regs[i + 1] = (v >> 8);
|
|
if (i + 3 < sizeof hp->regs) {
|
|
hp->regs[i + 2] = (v >> 16);
|
|
hp->regs[i + 3] = (v >> 24);
|
|
}
|
|
}
|
|
} else {
|
|
for (i = 0; i < sizeof hp->regs; i++) {
|
|
hp->regs[i] = HREAD1(hp, i);
|
|
}
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
sdhc_resume(device_t dev, const pmf_qual_t *qual)
|
|
{
|
|
struct sdhc_softc *sc = device_private(dev);
|
|
struct sdhc_host *hp;
|
|
size_t i;
|
|
|
|
/* Restore the host controller state. */
|
|
for (size_t n = 0; n < sc->sc_nhosts; n++) {
|
|
hp = sc->sc_host[n];
|
|
(void)sdhc_host_reset(hp);
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
for (i = 0; i < sizeof hp->regs; i += 4) {
|
|
if (i + 3 < sizeof hp->regs) {
|
|
HWRITE4(hp, i,
|
|
(hp->regs[i + 0] << 0)
|
|
| (hp->regs[i + 1] << 8)
|
|
| (hp->regs[i + 2] << 16)
|
|
| (hp->regs[i + 3] << 24));
|
|
} else {
|
|
HWRITE4(hp, i,
|
|
(hp->regs[i + 0] << 0)
|
|
| (hp->regs[i + 1] << 8));
|
|
}
|
|
}
|
|
} else {
|
|
for (i = 0; i < sizeof hp->regs; i++) {
|
|
HWRITE1(hp, i, hp->regs[i]);
|
|
}
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
sdhc_shutdown(device_t dev, int flags)
|
|
{
|
|
struct sdhc_softc *sc = device_private(dev);
|
|
struct sdhc_host *hp;
|
|
|
|
/* XXX chip locks up if we don't disable it before reboot. */
|
|
for (size_t i = 0; i < sc->sc_nhosts; i++) {
|
|
hp = sc->sc_host[i];
|
|
(void)sdhc_host_reset(hp);
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Reset the host controller. Called during initialization, when
|
|
* cards are removed, upon resume, and during error recovery.
|
|
*/
|
|
static int
|
|
sdhc_host_reset1(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
uint32_t sdhcimask;
|
|
int error;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
/* Disable all interrupts. */
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, 0);
|
|
} else {
|
|
HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, 0);
|
|
}
|
|
|
|
/*
|
|
* Reset the entire host controller and wait up to 100ms for
|
|
* the controller to clear the reset bit.
|
|
*/
|
|
error = sdhc_soft_reset(hp, SDHC_RESET_ALL);
|
|
if (error)
|
|
goto out;
|
|
|
|
/* Set data timeout counter value to max for now. */
|
|
HWRITE1(hp, SDHC_TIMEOUT_CTL, SDHC_TIMEOUT_MAX);
|
|
#if 1
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
|
|
HWRITE4(hp, SDHC_NINTR_STATUS, SDHC_CMD_TIMEOUT_ERROR << 16);
|
|
#endif
|
|
|
|
/* Enable interrupts. */
|
|
sdhcimask = SDHC_CARD_REMOVAL | SDHC_CARD_INSERTION |
|
|
SDHC_BUFFER_READ_READY | SDHC_BUFFER_WRITE_READY |
|
|
SDHC_DMA_INTERRUPT | SDHC_BLOCK_GAP_EVENT |
|
|
SDHC_TRANSFER_COMPLETE | SDHC_COMMAND_COMPLETE;
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
sdhcimask |= SDHC_EINTR_STATUS_MASK << 16;
|
|
HWRITE4(hp, SDHC_NINTR_STATUS_EN, sdhcimask);
|
|
sdhcimask ^=
|
|
(SDHC_EINTR_STATUS_MASK ^ SDHC_EINTR_SIGNAL_MASK) << 16;
|
|
sdhcimask ^= SDHC_BUFFER_READ_READY ^ SDHC_BUFFER_WRITE_READY;
|
|
HWRITE4(hp, SDHC_NINTR_SIGNAL_EN, sdhcimask);
|
|
} else {
|
|
HWRITE2(hp, SDHC_NINTR_STATUS_EN, sdhcimask);
|
|
HWRITE2(hp, SDHC_EINTR_STATUS_EN, SDHC_EINTR_STATUS_MASK);
|
|
sdhcimask ^= SDHC_BUFFER_READ_READY ^ SDHC_BUFFER_WRITE_READY;
|
|
HWRITE2(hp, SDHC_NINTR_SIGNAL_EN, sdhcimask);
|
|
HWRITE2(hp, SDHC_EINTR_SIGNAL_EN, SDHC_EINTR_SIGNAL_MASK);
|
|
}
|
|
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
sdhc_host_reset(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int error;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
error = sdhc_host_reset1(sch);
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
return error;
|
|
}
|
|
|
|
static uint32_t
|
|
sdhc_host_ocr(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
return hp->ocr;
|
|
}
|
|
|
|
static int
|
|
sdhc_host_maxblklen(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
return hp->maxblklen;
|
|
}
|
|
|
|
/*
|
|
* Return non-zero if the card is currently inserted.
|
|
*/
|
|
static int
|
|
sdhc_card_detect(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int r;
|
|
|
|
if (hp->sc->sc_vendor_card_detect)
|
|
return (*hp->sc->sc_vendor_card_detect)(hp->sc);
|
|
|
|
r = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_CARD_INSERTED);
|
|
|
|
return r ? 1 : 0;
|
|
}
|
|
|
|
/*
|
|
* Return non-zero if the card is currently write-protected.
|
|
*/
|
|
static int
|
|
sdhc_write_protect(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int r;
|
|
|
|
if (hp->sc->sc_vendor_write_protect)
|
|
return (*hp->sc->sc_vendor_write_protect)(hp->sc);
|
|
|
|
r = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_WRITE_PROTECT_SWITCH);
|
|
|
|
return r ? 0 : 1;
|
|
}
|
|
|
|
/*
|
|
* Set or change SD bus voltage and enable or disable SD bus power.
|
|
* Return zero on success.
|
|
*/
|
|
static int
|
|
sdhc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
uint8_t vdd;
|
|
int error = 0;
|
|
const uint32_t pcmask =
|
|
~(SDHC_BUS_POWER | (SDHC_VOLTAGE_MASK << SDHC_VOLTAGE_SHIFT));
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
|
|
/*
|
|
* Disable bus power before voltage change.
|
|
*/
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)
|
|
&& !ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_PWR0))
|
|
HWRITE1(hp, SDHC_POWER_CTL, 0);
|
|
|
|
/* If power is disabled, reset the host and return now. */
|
|
if (ocr == 0) {
|
|
(void)sdhc_host_reset1(hp);
|
|
callout_halt(&hp->tuning_timer, &hp->intr_lock);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Select the lowest voltage according to capabilities.
|
|
*/
|
|
ocr &= hp->ocr;
|
|
if (ISSET(ocr, MMC_OCR_1_65V_1_95V)) {
|
|
vdd = SDHC_VOLTAGE_1_8V;
|
|
} else if (ISSET(ocr, MMC_OCR_2_9V_3_0V|MMC_OCR_3_0V_3_1V)) {
|
|
vdd = SDHC_VOLTAGE_3_0V;
|
|
} else if (ISSET(ocr, MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) {
|
|
vdd = SDHC_VOLTAGE_3_3V;
|
|
} else {
|
|
/* Unsupported voltage level requested. */
|
|
error = EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
/*
|
|
* Enable bus power. Wait at least 1 ms (or 74 clocks) plus
|
|
* voltage ramp until power rises.
|
|
*/
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_SINGLE_POWER_WRITE)) {
|
|
HWRITE1(hp, SDHC_POWER_CTL,
|
|
(vdd << SDHC_VOLTAGE_SHIFT) | SDHC_BUS_POWER);
|
|
} else {
|
|
HWRITE1(hp, SDHC_POWER_CTL,
|
|
HREAD1(hp, SDHC_POWER_CTL) & pcmask);
|
|
sdmmc_delay(1);
|
|
HWRITE1(hp, SDHC_POWER_CTL,
|
|
(vdd << SDHC_VOLTAGE_SHIFT));
|
|
sdmmc_delay(1);
|
|
HSET1(hp, SDHC_POWER_CTL, SDHC_BUS_POWER);
|
|
sdmmc_delay(10000);
|
|
}
|
|
|
|
/*
|
|
* The host system may not power the bus due to battery low,
|
|
* etc. In that case, the host controller should clear the
|
|
* bus power bit.
|
|
*/
|
|
if (!ISSET(HREAD1(hp, SDHC_POWER_CTL), SDHC_BUS_POWER)) {
|
|
error = ENXIO;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Return the smallest possible base clock frequency divisor value
|
|
* for the CLOCK_CTL register to produce `freq' (KHz).
|
|
*/
|
|
static bool
|
|
sdhc_clock_divisor(struct sdhc_host *hp, u_int freq, u_int *divp)
|
|
{
|
|
u_int div;
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_HAVE_CGM)) {
|
|
for (div = hp->clkbase / freq; div <= 0x3ff; div++) {
|
|
if ((hp->clkbase / div) <= freq) {
|
|
*divp = SDHC_SDCLK_CGM
|
|
| ((div & 0x300) << SDHC_SDCLK_XDIV_SHIFT)
|
|
| ((div & 0x0ff) << SDHC_SDCLK_DIV_SHIFT);
|
|
//freq = hp->clkbase / div;
|
|
return true;
|
|
}
|
|
}
|
|
/* No divisor found. */
|
|
return false;
|
|
}
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_HAVE_DVS)) {
|
|
u_int dvs = (hp->clkbase + freq - 1) / freq;
|
|
u_int roundup = dvs & 1;
|
|
for (dvs >>= 1, div = 1; div <= 256; div <<= 1, dvs >>= 1) {
|
|
if (dvs + roundup <= 16) {
|
|
dvs += roundup - 1;
|
|
*divp = (div << SDHC_SDCLK_DIV_SHIFT)
|
|
| (dvs << SDHC_SDCLK_DVS_SHIFT);
|
|
DPRINTF(2,
|
|
("%s: divisor for freq %u is %u * %u\n",
|
|
HDEVNAME(hp), freq, div * 2, dvs + 1));
|
|
//freq = hp->clkbase / (div * 2) * (dvs + 1);
|
|
return true;
|
|
}
|
|
/*
|
|
* If we drop bits, we need to round up the divisor.
|
|
*/
|
|
roundup |= dvs & 1;
|
|
}
|
|
/* No divisor found. */
|
|
return false;
|
|
}
|
|
if (hp->sc->sc_clkmsk != 0) {
|
|
div = howmany(hp->clkbase, freq);
|
|
if (div > (hp->sc->sc_clkmsk >> (ffs(hp->sc->sc_clkmsk) - 1)))
|
|
return false;
|
|
*divp = div << (ffs(hp->sc->sc_clkmsk) - 1);
|
|
//freq = hp->clkbase / div;
|
|
return true;
|
|
}
|
|
if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
div = howmany(hp->clkbase, freq);
|
|
div = div > 1 ? howmany(div, 2) : 0;
|
|
if (div > 0x3ff)
|
|
return false;
|
|
*divp = (((div >> 8) & SDHC_SDCLK_XDIV_MASK)
|
|
<< SDHC_SDCLK_XDIV_SHIFT) |
|
|
(((div >> 0) & SDHC_SDCLK_DIV_MASK)
|
|
<< SDHC_SDCLK_DIV_SHIFT);
|
|
//freq = hp->clkbase / (div ? div * 2 : 1);
|
|
return true;
|
|
} else {
|
|
for (div = 1; div <= 256; div *= 2) {
|
|
if ((hp->clkbase / div) <= freq) {
|
|
*divp = (div / 2) << SDHC_SDCLK_DIV_SHIFT;
|
|
//freq = hp->clkbase / div;
|
|
return true;
|
|
}
|
|
}
|
|
/* No divisor found. */
|
|
return false;
|
|
}
|
|
/* No divisor found. */
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Set or change SDCLK frequency or disable the SD clock.
|
|
* Return zero on success.
|
|
*/
|
|
static int
|
|
sdhc_bus_clock_ddr(sdmmc_chipset_handle_t sch, int freq, bool ddr)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
u_int div;
|
|
u_int timo;
|
|
int16_t reg;
|
|
int error = 0;
|
|
bool present __diagused;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
present = ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_CMD_INHIBIT_MASK);
|
|
|
|
/* Must not stop the clock if commands are in progress. */
|
|
if (present && sdhc_card_detect(hp)) {
|
|
aprint_normal_dev(hp->sc->sc_dev,
|
|
"%s: command in progress\n", __func__);
|
|
}
|
|
#endif
|
|
|
|
if (hp->sc->sc_vendor_bus_clock) {
|
|
error = (*hp->sc->sc_vendor_bus_clock)(hp->sc, freq);
|
|
if (error != 0)
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Stop SD clock before changing the frequency.
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
HCLR4(hp, SDHC_VEND_SPEC,
|
|
SDHC_VEND_SPEC_CARD_CLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_FRC_SDCLK_ON);
|
|
if (freq == SDMMC_SDCLK_OFF) {
|
|
goto out;
|
|
}
|
|
} else if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
HCLR4(hp, SDHC_CLOCK_CTL, 0xfff8);
|
|
if (freq == SDMMC_SDCLK_OFF) {
|
|
HSET4(hp, SDHC_CLOCK_CTL, 0x80f0);
|
|
goto out;
|
|
}
|
|
} else {
|
|
HCLR2(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
|
|
if (freq == SDMMC_SDCLK_OFF)
|
|
goto out;
|
|
}
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
if (ddr)
|
|
HSET4(hp, SDHC_MIX_CTRL, SDHC_USDHC_DDR_EN);
|
|
else
|
|
HCLR4(hp, SDHC_MIX_CTRL, SDHC_USDHC_DDR_EN);
|
|
} else if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
HCLR2(hp, SDHC_HOST_CTL2, SDHC_UHS_MODE_SELECT_MASK);
|
|
if (freq > 100000) {
|
|
HSET2(hp, SDHC_HOST_CTL2, SDHC_UHS_MODE_SELECT_SDR104);
|
|
} else if (freq > 50000) {
|
|
HSET2(hp, SDHC_HOST_CTL2, SDHC_UHS_MODE_SELECT_SDR50);
|
|
} else if (freq > 25000) {
|
|
if (ddr) {
|
|
HSET2(hp, SDHC_HOST_CTL2,
|
|
SDHC_UHS_MODE_SELECT_DDR50);
|
|
} else {
|
|
HSET2(hp, SDHC_HOST_CTL2,
|
|
SDHC_UHS_MODE_SELECT_SDR25);
|
|
}
|
|
} else if (freq > 400) {
|
|
HSET2(hp, SDHC_HOST_CTL2, SDHC_UHS_MODE_SELECT_SDR12);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Slow down Ricoh 5U823 controller that isn't reliable
|
|
* at 100MHz bus clock.
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_SLOW_SDR50)) {
|
|
if (freq == 100000)
|
|
--freq;
|
|
}
|
|
|
|
/*
|
|
* Set the minimum base clock frequency divisor.
|
|
*/
|
|
if (!sdhc_clock_divisor(hp, freq, &div)) {
|
|
/* Invalid base clock frequency or `freq' value. */
|
|
aprint_error_dev(hp->sc->sc_dev,
|
|
"Invalid bus clock %d kHz\n", freq);
|
|
error = EINVAL;
|
|
goto out;
|
|
}
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
if (ddr) {
|
|
/* in ddr mode, divisor >>= 1 */
|
|
div = ((div >> 1) & (SDHC_SDCLK_DIV_MASK <<
|
|
SDHC_SDCLK_DIV_SHIFT)) |
|
|
(div & (SDHC_SDCLK_DVS_MASK <<
|
|
SDHC_SDCLK_DVS_SHIFT));
|
|
}
|
|
for (timo = 1000; timo > 0; timo--) {
|
|
if (ISSET(HREAD4(hp, SDHC_PRESENT_STATE), SDHC_SDSTB))
|
|
break;
|
|
sdmmc_delay(10);
|
|
}
|
|
HWRITE4(hp, SDHC_CLOCK_CTL,
|
|
div | (SDHC_TIMEOUT_MAX << 16) | 0x0f);
|
|
} else if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
HWRITE4(hp, SDHC_CLOCK_CTL,
|
|
div | (SDHC_TIMEOUT_MAX << 16));
|
|
} else {
|
|
reg = HREAD2(hp, SDHC_CLOCK_CTL);
|
|
reg &= (SDHC_INTCLK_STABLE | SDHC_INTCLK_ENABLE);
|
|
HWRITE2(hp, SDHC_CLOCK_CTL, reg | div);
|
|
}
|
|
|
|
/*
|
|
* Start internal clock. Wait 10ms for stabilization.
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
HSET4(hp, SDHC_VEND_SPEC,
|
|
SDHC_VEND_SPEC_CARD_CLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_FRC_SDCLK_ON);
|
|
} else if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
sdmmc_delay(10000);
|
|
HSET4(hp, SDHC_CLOCK_CTL,
|
|
8 | SDHC_INTCLK_ENABLE | SDHC_INTCLK_STABLE);
|
|
} else {
|
|
HSET2(hp, SDHC_CLOCK_CTL, SDHC_INTCLK_ENABLE);
|
|
for (timo = 1000; timo > 0; timo--) {
|
|
if (ISSET(HREAD2(hp, SDHC_CLOCK_CTL),
|
|
SDHC_INTCLK_STABLE))
|
|
break;
|
|
sdmmc_delay(10);
|
|
}
|
|
if (timo == 0) {
|
|
error = ETIMEDOUT;
|
|
DPRINTF(1,("%s: timeout\n", __func__));
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
HSET1(hp, SDHC_SOFTWARE_RESET, SDHC_INIT_ACTIVE);
|
|
/*
|
|
* Sending 80 clocks at 400kHz takes 200us.
|
|
* So delay for that time + slop and then
|
|
* check a few times for completion.
|
|
*/
|
|
sdmmc_delay(210);
|
|
for (timo = 10; timo > 0; timo--) {
|
|
if (!ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET),
|
|
SDHC_INIT_ACTIVE))
|
|
break;
|
|
sdmmc_delay(10);
|
|
}
|
|
DPRINTF(2,("%s: %u init spins\n", __func__, 10 - timo));
|
|
|
|
/*
|
|
* Enable SD clock.
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
HSET4(hp, SDHC_VEND_SPEC,
|
|
SDHC_VEND_SPEC_CARD_CLK_SOFT_EN |
|
|
SDHC_VEND_SPEC_FRC_SDCLK_ON);
|
|
} else {
|
|
HSET4(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
|
|
}
|
|
} else {
|
|
/*
|
|
* Enable SD clock.
|
|
*/
|
|
HSET2(hp, SDHC_CLOCK_CTL, SDHC_SDCLK_ENABLE);
|
|
|
|
if (freq > 25000 &&
|
|
!ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_HS_BIT))
|
|
HSET1(hp, SDHC_HOST_CTL, SDHC_HIGH_SPEED);
|
|
else
|
|
HCLR1(hp, SDHC_HOST_CTL, SDHC_HIGH_SPEED);
|
|
}
|
|
|
|
out:
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
sdhc_bus_width(sdmmc_chipset_handle_t sch, int width)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int reg;
|
|
|
|
switch (width) {
|
|
case 1:
|
|
case 4:
|
|
break;
|
|
|
|
case 8:
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_8BIT_MODE))
|
|
break;
|
|
/* FALLTHROUGH */
|
|
default:
|
|
DPRINTF(0,("%s: unsupported bus width (%d)\n",
|
|
HDEVNAME(hp), width));
|
|
return 1;
|
|
}
|
|
|
|
if (hp->sc->sc_vendor_bus_width) {
|
|
const int error = hp->sc->sc_vendor_bus_width(hp->sc, width);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
|
|
reg = HREAD1(hp, SDHC_HOST_CTL);
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
reg &= ~(SDHC_4BIT_MODE|SDHC_ESDHC_8BIT_MODE);
|
|
if (width == 4)
|
|
reg |= SDHC_4BIT_MODE;
|
|
else if (width == 8)
|
|
reg |= SDHC_ESDHC_8BIT_MODE;
|
|
} else {
|
|
reg &= ~SDHC_4BIT_MODE;
|
|
if (hp->specver >= SDHC_SPEC_VERS_300) {
|
|
reg &= ~SDHC_8BIT_MODE;
|
|
}
|
|
if (width == 4) {
|
|
reg |= SDHC_4BIT_MODE;
|
|
} else if (width == 8 && hp->specver >= SDHC_SPEC_VERS_300) {
|
|
reg |= SDHC_8BIT_MODE;
|
|
}
|
|
}
|
|
HWRITE1(hp, SDHC_HOST_CTL, reg);
|
|
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sdhc_bus_rod(sdmmc_chipset_handle_t sch, int on)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
if (hp->sc->sc_vendor_rod)
|
|
return (*hp->sc->sc_vendor_rod)(hp->sc, on);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
sdhc_card_enable_intr(sdmmc_chipset_handle_t sch, int enable)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
mutex_enter(&hp->intr_lock);
|
|
if (enable) {
|
|
HSET2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
|
|
HSET2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_CARD_INTERRUPT);
|
|
} else {
|
|
HCLR2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_CARD_INTERRUPT);
|
|
HCLR2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
|
|
}
|
|
mutex_exit(&hp->intr_lock);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sdhc_card_intr_ack(sdmmc_chipset_handle_t sch)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
mutex_enter(&hp->intr_lock);
|
|
HSET2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
|
|
mutex_exit(&hp->intr_lock);
|
|
}
|
|
}
|
|
|
|
static int
|
|
sdhc_signal_voltage(sdmmc_chipset_handle_t sch, int signal_voltage)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
switch (signal_voltage) {
|
|
case SDMMC_SIGNAL_VOLTAGE_180:
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC))
|
|
HSET2(hp, SDHC_HOST_CTL2, SDHC_1_8V_SIGNAL_EN);
|
|
break;
|
|
case SDMMC_SIGNAL_VOLTAGE_330:
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC))
|
|
HCLR2(hp, SDHC_HOST_CTL2, SDHC_1_8V_SIGNAL_EN);
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sampling clock tuning procedure (UHS)
|
|
*/
|
|
static int
|
|
sdhc_execute_tuning1(struct sdhc_host *hp, int timing)
|
|
{
|
|
struct sdmmc_command cmd;
|
|
uint8_t hostctl;
|
|
int opcode, error, retry = 40;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
hp->tuning_timing = timing;
|
|
|
|
switch (timing) {
|
|
case SDMMC_TIMING_MMC_HS200:
|
|
opcode = MMC_SEND_TUNING_BLOCK_HS200;
|
|
break;
|
|
case SDMMC_TIMING_UHS_SDR50:
|
|
if (!ISSET(hp->sc->sc_caps2, SDHC_TUNING_SDR50))
|
|
return 0;
|
|
/* FALLTHROUGH */
|
|
case SDMMC_TIMING_UHS_SDR104:
|
|
opcode = MMC_SEND_TUNING_BLOCK;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
hostctl = HREAD1(hp, SDHC_HOST_CTL);
|
|
|
|
/* enable buffer read ready interrupt */
|
|
HSET2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_BUFFER_READ_READY);
|
|
HSET2(hp, SDHC_NINTR_STATUS_EN, SDHC_BUFFER_READ_READY);
|
|
|
|
/* disable DMA */
|
|
HCLR1(hp, SDHC_HOST_CTL, SDHC_DMA_SELECT);
|
|
|
|
/* reset tuning circuit */
|
|
HCLR2(hp, SDHC_HOST_CTL2, SDHC_SAMPLING_CLOCK_SEL);
|
|
|
|
/* start of tuning */
|
|
HWRITE2(hp, SDHC_HOST_CTL2, SDHC_EXECUTE_TUNING);
|
|
|
|
do {
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.c_opcode = opcode;
|
|
cmd.c_arg = 0;
|
|
cmd.c_flags = SCF_CMD_ADTC | SCF_CMD_READ | SCF_RSP_R1;
|
|
if (ISSET(hostctl, SDHC_8BIT_MODE)) {
|
|
cmd.c_blklen = cmd.c_datalen = 128;
|
|
} else {
|
|
cmd.c_blklen = cmd.c_datalen = 64;
|
|
}
|
|
|
|
error = sdhc_start_command(hp, &cmd);
|
|
if (error)
|
|
break;
|
|
|
|
if (!sdhc_wait_intr(hp, SDHC_BUFFER_READ_READY,
|
|
SDHC_TUNING_TIMEOUT, false)) {
|
|
break;
|
|
}
|
|
|
|
delay(1000);
|
|
} while (HREAD2(hp, SDHC_HOST_CTL2) & SDHC_EXECUTE_TUNING && --retry);
|
|
|
|
/* disable buffer read ready interrupt */
|
|
HCLR2(hp, SDHC_NINTR_SIGNAL_EN, SDHC_BUFFER_READ_READY);
|
|
HCLR2(hp, SDHC_NINTR_STATUS_EN, SDHC_BUFFER_READ_READY);
|
|
|
|
if (HREAD2(hp, SDHC_HOST_CTL2) & SDHC_EXECUTE_TUNING) {
|
|
HCLR2(hp, SDHC_HOST_CTL2,
|
|
SDHC_SAMPLING_CLOCK_SEL|SDHC_EXECUTE_TUNING);
|
|
sdhc_soft_reset(hp, SDHC_RESET_DAT|SDHC_RESET_CMD);
|
|
aprint_error_dev(hp->sc->sc_dev,
|
|
"tuning did not complete, using fixed sampling clock\n");
|
|
return EIO; /* tuning did not complete */
|
|
}
|
|
|
|
if ((HREAD2(hp, SDHC_HOST_CTL2) & SDHC_SAMPLING_CLOCK_SEL) == 0) {
|
|
HCLR2(hp, SDHC_HOST_CTL2,
|
|
SDHC_SAMPLING_CLOCK_SEL|SDHC_EXECUTE_TUNING);
|
|
sdhc_soft_reset(hp, SDHC_RESET_DAT|SDHC_RESET_CMD);
|
|
aprint_error_dev(hp->sc->sc_dev,
|
|
"tuning failed, using fixed sampling clock\n");
|
|
return EIO; /* tuning failed */
|
|
}
|
|
|
|
if (hp->tuning_timer_count) {
|
|
callout_schedule(&hp->tuning_timer,
|
|
hz * hp->tuning_timer_count);
|
|
}
|
|
|
|
return 0; /* tuning completed */
|
|
}
|
|
|
|
static int
|
|
sdhc_execute_tuning(sdmmc_chipset_handle_t sch, int timing)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int error;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
error = sdhc_execute_tuning1(hp, timing);
|
|
mutex_exit(&hp->intr_lock);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
sdhc_tuning_timer(void *arg)
|
|
{
|
|
struct sdhc_host *hp = arg;
|
|
|
|
atomic_swap_uint(&hp->tuning_timer_pending, 1);
|
|
}
|
|
|
|
static int
|
|
sdhc_wait_state(struct sdhc_host *hp, uint32_t mask, uint32_t value)
|
|
{
|
|
uint32_t state;
|
|
int timeout;
|
|
|
|
for (timeout = 10000; timeout > 0; timeout--) {
|
|
if (((state = HREAD4(hp, SDHC_PRESENT_STATE)) & mask) == value)
|
|
return 0;
|
|
sdmmc_delay(10);
|
|
}
|
|
aprint_error_dev(hp->sc->sc_dev, "timeout waiting for mask %#x value %#x (state=%#x)\n",
|
|
mask, value, state);
|
|
return ETIMEDOUT;
|
|
}
|
|
|
|
static void
|
|
sdhc_exec_command(sdmmc_chipset_handle_t sch, struct sdmmc_command *cmd)
|
|
{
|
|
struct sdhc_host *hp = (struct sdhc_host *)sch;
|
|
int error;
|
|
bool probing;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
|
|
if (atomic_cas_uint(&hp->tuning_timer_pending, 1, 0) == 1) {
|
|
(void)sdhc_execute_tuning1(hp, hp->tuning_timing);
|
|
}
|
|
|
|
if (cmd->c_data &&
|
|
ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
const uint16_t ready = SDHC_BUFFER_READ_READY | SDHC_BUFFER_WRITE_READY;
|
|
if (ISSET(hp->flags, SHF_USE_DMA)) {
|
|
HCLR2(hp, SDHC_NINTR_SIGNAL_EN, ready);
|
|
HCLR2(hp, SDHC_NINTR_STATUS_EN, ready);
|
|
} else {
|
|
HSET2(hp, SDHC_NINTR_SIGNAL_EN, ready);
|
|
HSET2(hp, SDHC_NINTR_STATUS_EN, ready);
|
|
}
|
|
}
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_TIMEOUT)) {
|
|
const uint16_t eintr = SDHC_CMD_TIMEOUT_ERROR;
|
|
if (cmd->c_data != NULL) {
|
|
HCLR2(hp, SDHC_EINTR_SIGNAL_EN, eintr);
|
|
HCLR2(hp, SDHC_EINTR_STATUS_EN, eintr);
|
|
} else {
|
|
HSET2(hp, SDHC_EINTR_SIGNAL_EN, eintr);
|
|
HSET2(hp, SDHC_EINTR_STATUS_EN, eintr);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Start the MMC command, or mark `cmd' as failed and return.
|
|
*/
|
|
error = sdhc_start_command(hp, cmd);
|
|
if (error) {
|
|
cmd->c_error = error;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Wait until the command phase is done, or until the command
|
|
* is marked done for any other reason.
|
|
*/
|
|
probing = (cmd->c_flags & SCF_TOUT_OK) != 0;
|
|
if (!sdhc_wait_intr(hp, SDHC_COMMAND_COMPLETE, SDHC_COMMAND_TIMEOUT, probing)) {
|
|
DPRINTF(1,("%s: timeout for command\n", __func__));
|
|
sdmmc_delay(50);
|
|
cmd->c_error = ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* The host controller removes bits [0:7] from the response
|
|
* data (CRC) and we pass the data up unchanged to the bus
|
|
* driver (without padding).
|
|
*/
|
|
if (cmd->c_error == 0 && ISSET(cmd->c_flags, SCF_RSP_PRESENT)) {
|
|
cmd->c_resp[0] = HREAD4(hp, SDHC_RESPONSE + 0);
|
|
if (ISSET(cmd->c_flags, SCF_RSP_136)) {
|
|
cmd->c_resp[1] = HREAD4(hp, SDHC_RESPONSE + 4);
|
|
cmd->c_resp[2] = HREAD4(hp, SDHC_RESPONSE + 8);
|
|
cmd->c_resp[3] = HREAD4(hp, SDHC_RESPONSE + 12);
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_RSP136_CRC)) {
|
|
cmd->c_resp[0] = (cmd->c_resp[0] >> 8) |
|
|
(cmd->c_resp[1] << 24);
|
|
cmd->c_resp[1] = (cmd->c_resp[1] >> 8) |
|
|
(cmd->c_resp[2] << 24);
|
|
cmd->c_resp[2] = (cmd->c_resp[2] >> 8) |
|
|
(cmd->c_resp[3] << 24);
|
|
cmd->c_resp[3] = (cmd->c_resp[3] >> 8);
|
|
}
|
|
}
|
|
}
|
|
DPRINTF(1,("%s: resp = %08x\n", HDEVNAME(hp), cmd->c_resp[0]));
|
|
|
|
/*
|
|
* If the command has data to transfer in any direction,
|
|
* execute the transfer now.
|
|
*/
|
|
if (cmd->c_error == 0 && cmd->c_data != NULL)
|
|
sdhc_transfer_data(hp, cmd);
|
|
else if (ISSET(cmd->c_flags, SCF_RSP_BSY)) {
|
|
if (!sdhc_wait_intr(hp, SDHC_TRANSFER_COMPLETE, hz * 10, false)) {
|
|
DPRINTF(1,("%s: sdhc_exec_command: RSP_BSY\n",
|
|
HDEVNAME(hp)));
|
|
cmd->c_error = ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)
|
|
&& !ISSET(hp->sc->sc_flags, SDHC_FLAG_NO_LED_ON)) {
|
|
/* Turn off the LED. */
|
|
HCLR1(hp, SDHC_HOST_CTL, SDHC_LED_ON);
|
|
}
|
|
SET(cmd->c_flags, SCF_ITSDONE);
|
|
|
|
mutex_exit(&hp->intr_lock);
|
|
|
|
DPRINTF(1,("%s: cmd %d %s (flags=%08x error=%d)\n", HDEVNAME(hp),
|
|
cmd->c_opcode, (cmd->c_error == 0) ? "done" : "abort",
|
|
cmd->c_flags, cmd->c_error));
|
|
}
|
|
|
|
static int
|
|
sdhc_start_command(struct sdhc_host *hp, struct sdmmc_command *cmd)
|
|
{
|
|
struct sdhc_softc * const sc = hp->sc;
|
|
uint16_t blksize = 0;
|
|
uint16_t blkcount = 0;
|
|
uint16_t mode;
|
|
uint16_t command;
|
|
uint32_t pmask;
|
|
int error;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
DPRINTF(1,("%s: start cmd %d arg=%08x data=%p dlen=%d flags=%08x, status=%#x\n",
|
|
HDEVNAME(hp), cmd->c_opcode, cmd->c_arg, cmd->c_data,
|
|
cmd->c_datalen, cmd->c_flags, HREAD4(hp, SDHC_NINTR_STATUS)));
|
|
|
|
/*
|
|
* The maximum block length for commands should be the minimum
|
|
* of the host buffer size and the card buffer size. (1.7.2)
|
|
*/
|
|
|
|
/* Fragment the data into proper blocks. */
|
|
if (cmd->c_datalen > 0) {
|
|
blksize = MIN(cmd->c_datalen, cmd->c_blklen);
|
|
blkcount = cmd->c_datalen / blksize;
|
|
if (cmd->c_datalen % blksize > 0) {
|
|
/* XXX: Split this command. (1.7.4) */
|
|
aprint_error_dev(sc->sc_dev,
|
|
"data not a multiple of %u bytes\n", blksize);
|
|
return EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check limit imposed by 9-bit block count. (1.7.2) */
|
|
if (blkcount > SDHC_BLOCK_COUNT_MAX) {
|
|
aprint_error_dev(sc->sc_dev, "too much data\n");
|
|
return EINVAL;
|
|
}
|
|
|
|
/* Prepare transfer mode register value. (2.2.5) */
|
|
mode = SDHC_BLOCK_COUNT_ENABLE;
|
|
if (ISSET(cmd->c_flags, SCF_CMD_READ))
|
|
mode |= SDHC_READ_MODE;
|
|
if (blkcount > 1) {
|
|
mode |= SDHC_MULTI_BLOCK_MODE;
|
|
/* XXX only for memory commands? */
|
|
mode |= SDHC_AUTO_CMD12_ENABLE;
|
|
}
|
|
if (cmd->c_dmamap != NULL && cmd->c_datalen > 0 &&
|
|
ISSET(hp->flags, SHF_MODE_DMAEN)) {
|
|
mode |= SDHC_DMA_ENABLE;
|
|
}
|
|
|
|
/*
|
|
* Prepare command register value. (2.2.6)
|
|
*/
|
|
command = (cmd->c_opcode & SDHC_COMMAND_INDEX_MASK) << SDHC_COMMAND_INDEX_SHIFT;
|
|
|
|
if (ISSET(cmd->c_flags, SCF_RSP_CRC))
|
|
command |= SDHC_CRC_CHECK_ENABLE;
|
|
if (ISSET(cmd->c_flags, SCF_RSP_IDX))
|
|
command |= SDHC_INDEX_CHECK_ENABLE;
|
|
if (cmd->c_datalen > 0)
|
|
command |= SDHC_DATA_PRESENT_SELECT;
|
|
|
|
if (!ISSET(cmd->c_flags, SCF_RSP_PRESENT))
|
|
command |= SDHC_NO_RESPONSE;
|
|
else if (ISSET(cmd->c_flags, SCF_RSP_136))
|
|
command |= SDHC_RESP_LEN_136;
|
|
else if (ISSET(cmd->c_flags, SCF_RSP_BSY))
|
|
command |= SDHC_RESP_LEN_48_CHK_BUSY;
|
|
else
|
|
command |= SDHC_RESP_LEN_48;
|
|
|
|
/* Wait until command and optionally data inhibit bits are clear. (1.5) */
|
|
pmask = SDHC_CMD_INHIBIT_CMD;
|
|
if (cmd->c_flags & (SCF_CMD_ADTC|SCF_RSP_BSY))
|
|
pmask |= SDHC_CMD_INHIBIT_DAT;
|
|
error = sdhc_wait_state(hp, pmask, 0);
|
|
if (error) {
|
|
(void) sdhc_soft_reset(hp, SDHC_RESET_DAT|SDHC_RESET_CMD);
|
|
device_printf(sc->sc_dev, "command or data phase inhibited\n");
|
|
return error;
|
|
}
|
|
|
|
DPRINTF(1,("%s: writing cmd: blksize=%d blkcnt=%d mode=%04x cmd=%04x\n",
|
|
HDEVNAME(hp), blksize, blkcount, mode, command));
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
blksize |= (MAX(0, PAGE_SHIFT - 12) & SDHC_DMA_BOUNDARY_MASK) <<
|
|
SDHC_DMA_BOUNDARY_SHIFT; /* PAGE_SIZE DMA boundary */
|
|
}
|
|
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
/* Alert the user not to remove the card. */
|
|
HSET1(hp, SDHC_HOST_CTL, SDHC_LED_ON);
|
|
}
|
|
|
|
/* Set DMA start address. */
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_MASK) && cmd->c_data != NULL) {
|
|
for (int seg = 0; seg < cmd->c_dmamap->dm_nsegs; seg++) {
|
|
bus_addr_t paddr =
|
|
cmd->c_dmamap->dm_segs[seg].ds_addr;
|
|
uint16_t len =
|
|
cmd->c_dmamap->dm_segs[seg].ds_len == 65536 ?
|
|
0 : cmd->c_dmamap->dm_segs[seg].ds_len;
|
|
uint16_t attr =
|
|
SDHC_ADMA2_VALID | SDHC_ADMA2_ACT_TRANS;
|
|
if (seg == cmd->c_dmamap->dm_nsegs - 1) {
|
|
attr |= SDHC_ADMA2_END;
|
|
}
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_32)) {
|
|
struct sdhc_adma2_descriptor32 *desc =
|
|
hp->adma2;
|
|
desc[seg].attribute = htole16(attr);
|
|
desc[seg].length = htole16(len);
|
|
desc[seg].address = htole32(paddr);
|
|
} else {
|
|
struct sdhc_adma2_descriptor64 *desc =
|
|
hp->adma2;
|
|
desc[seg].attribute = htole16(attr);
|
|
desc[seg].length = htole16(len);
|
|
desc[seg].address = htole32(paddr & 0xffffffff);
|
|
desc[seg].address_hi = htole32(
|
|
(uint64_t)paddr >> 32);
|
|
}
|
|
}
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_32)) {
|
|
struct sdhc_adma2_descriptor32 *desc = hp->adma2;
|
|
desc[cmd->c_dmamap->dm_nsegs].attribute = htole16(0);
|
|
} else {
|
|
struct sdhc_adma2_descriptor64 *desc = hp->adma2;
|
|
desc[cmd->c_dmamap->dm_nsegs].attribute = htole16(0);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, hp->adma_map, 0, PAGE_SIZE,
|
|
BUS_DMASYNC_PREWRITE);
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
HCLR4(hp, SDHC_HOST_CTL, SDHC_USDHC_DMA_SELECT);
|
|
HSET4(hp, SDHC_HOST_CTL, SDHC_USDHC_DMA_SELECT_ADMA2);
|
|
} else {
|
|
HCLR1(hp, SDHC_HOST_CTL, SDHC_DMA_SELECT);
|
|
HSET1(hp, SDHC_HOST_CTL, SDHC_DMA_SELECT_ADMA2);
|
|
}
|
|
|
|
const bus_addr_t desc_addr = hp->adma_map->dm_segs[0].ds_addr;
|
|
|
|
HWRITE4(hp, SDHC_ADMA_SYSTEM_ADDR, desc_addr & 0xffffffff);
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_64)) {
|
|
HWRITE4(hp, SDHC_ADMA_SYSTEM_ADDR + 4,
|
|
(uint64_t)desc_addr >> 32);
|
|
}
|
|
} else if (ISSET(mode, SDHC_DMA_ENABLE) &&
|
|
!ISSET(sc->sc_flags, SDHC_FLAG_EXTERNAL_DMA)) {
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
HCLR4(hp, SDHC_HOST_CTL, SDHC_USDHC_DMA_SELECT);
|
|
}
|
|
HWRITE4(hp, SDHC_DMA_ADDR, cmd->c_dmamap->dm_segs[0].ds_addr);
|
|
}
|
|
|
|
/*
|
|
* Start a CPU data transfer. Writing to the high order byte
|
|
* of the SDHC_COMMAND register triggers the SD command. (1.5)
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
HWRITE4(hp, SDHC_BLOCK_SIZE, blksize | (blkcount << 16));
|
|
HWRITE4(hp, SDHC_ARGUMENT, cmd->c_arg);
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_USDHC)) {
|
|
/* mode bits is in MIX_CTRL register on uSDHC */
|
|
HWRITE4(hp, SDHC_MIX_CTRL, mode |
|
|
(HREAD4(hp, SDHC_MIX_CTRL) &
|
|
~(SDHC_MULTI_BLOCK_MODE |
|
|
SDHC_READ_MODE |
|
|
SDHC_AUTO_CMD12_ENABLE |
|
|
SDHC_BLOCK_COUNT_ENABLE |
|
|
SDHC_DMA_ENABLE)));
|
|
HWRITE4(hp, SDHC_TRANSFER_MODE, command << 16);
|
|
} else {
|
|
HWRITE4(hp, SDHC_TRANSFER_MODE, mode | (command << 16));
|
|
}
|
|
} else {
|
|
HWRITE2(hp, SDHC_BLOCK_SIZE, blksize);
|
|
HWRITE2(hp, SDHC_BLOCK_COUNT, blkcount);
|
|
HWRITE4(hp, SDHC_ARGUMENT, cmd->c_arg);
|
|
HWRITE2(hp, SDHC_TRANSFER_MODE, mode);
|
|
HWRITE2(hp, SDHC_COMMAND, command);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
sdhc_transfer_data(struct sdhc_host *hp, struct sdmmc_command *cmd)
|
|
{
|
|
struct sdhc_softc *sc = hp->sc;
|
|
int error;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
DPRINTF(1,("%s: data transfer: resp=%08x datalen=%u\n", HDEVNAME(hp),
|
|
MMC_R1(cmd->c_resp), cmd->c_datalen));
|
|
|
|
#ifdef SDHC_DEBUG
|
|
/* XXX I forgot why I wanted to know when this happens :-( */
|
|
if ((cmd->c_opcode == 52 || cmd->c_opcode == 53) &&
|
|
ISSET(MMC_R1(cmd->c_resp), 0xcb00)) {
|
|
aprint_error_dev(hp->sc->sc_dev,
|
|
"CMD52/53 error response flags %#x\n",
|
|
MMC_R1(cmd->c_resp) & 0xff00);
|
|
}
|
|
#endif
|
|
|
|
if (cmd->c_dmamap != NULL) {
|
|
if (hp->sc->sc_vendor_transfer_data_dma != NULL) {
|
|
error = hp->sc->sc_vendor_transfer_data_dma(sc, cmd);
|
|
if (error == 0 && !sdhc_wait_intr(hp,
|
|
SDHC_TRANSFER_COMPLETE, SDHC_DMA_TIMEOUT, false)) {
|
|
DPRINTF(1,("%s: timeout\n", __func__));
|
|
error = ETIMEDOUT;
|
|
}
|
|
} else {
|
|
error = sdhc_transfer_data_dma(hp, cmd);
|
|
}
|
|
} else
|
|
error = sdhc_transfer_data_pio(hp, cmd);
|
|
if (error)
|
|
cmd->c_error = error;
|
|
SET(cmd->c_flags, SCF_ITSDONE);
|
|
|
|
DPRINTF(1,("%s: data transfer done (error=%d)\n",
|
|
HDEVNAME(hp), cmd->c_error));
|
|
}
|
|
|
|
static int
|
|
sdhc_transfer_data_dma(struct sdhc_host *hp, struct sdmmc_command *cmd)
|
|
{
|
|
bus_dma_segment_t *dm_segs = cmd->c_dmamap->dm_segs;
|
|
bus_addr_t posaddr;
|
|
bus_addr_t segaddr;
|
|
bus_size_t seglen;
|
|
u_int seg = 0;
|
|
int error = 0;
|
|
int status;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_DMA_INTERRUPT);
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_DMA_INTERRUPT);
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_TRANSFER_COMPLETE);
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_TRANSFER_COMPLETE);
|
|
|
|
for (;;) {
|
|
status = sdhc_wait_intr(hp,
|
|
SDHC_DMA_INTERRUPT|SDHC_TRANSFER_COMPLETE,
|
|
SDHC_DMA_TIMEOUT, false);
|
|
|
|
if (status & SDHC_TRANSFER_COMPLETE) {
|
|
break;
|
|
}
|
|
if (!status) {
|
|
DPRINTF(1,("%s: timeout\n", __func__));
|
|
error = ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_MASK)) {
|
|
continue;
|
|
}
|
|
|
|
if ((status & SDHC_DMA_INTERRUPT) == 0) {
|
|
continue;
|
|
}
|
|
|
|
/* DMA Interrupt (boundary crossing) */
|
|
|
|
segaddr = dm_segs[seg].ds_addr;
|
|
seglen = dm_segs[seg].ds_len;
|
|
posaddr = HREAD4(hp, SDHC_DMA_ADDR);
|
|
|
|
if ((seg == (cmd->c_dmamap->dm_nsegs-1)) && (posaddr == (segaddr + seglen))) {
|
|
continue;
|
|
}
|
|
if ((posaddr >= segaddr) && (posaddr < (segaddr + seglen)))
|
|
HWRITE4(hp, SDHC_DMA_ADDR, posaddr);
|
|
else if ((posaddr >= segaddr) && (posaddr == (segaddr + seglen)) && (seg + 1) < cmd->c_dmamap->dm_nsegs)
|
|
HWRITE4(hp, SDHC_DMA_ADDR, dm_segs[++seg].ds_addr);
|
|
KASSERT(seg < cmd->c_dmamap->dm_nsegs);
|
|
}
|
|
|
|
if (ISSET(hp->flags, SHF_USE_ADMA2_MASK)) {
|
|
bus_dmamap_sync(hp->sc->sc_dmat, hp->adma_map, 0,
|
|
PAGE_SIZE, BUS_DMASYNC_POSTWRITE);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
sdhc_transfer_data_pio(struct sdhc_host *hp, struct sdmmc_command *cmd)
|
|
{
|
|
uint8_t *data = cmd->c_data;
|
|
void (*pio_func)(struct sdhc_host *, uint8_t *, u_int);
|
|
u_int len, datalen;
|
|
u_int imask;
|
|
u_int pmask;
|
|
int error = 0;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
if (ISSET(cmd->c_flags, SCF_CMD_READ)) {
|
|
imask = SDHC_BUFFER_READ_READY;
|
|
pmask = SDHC_BUFFER_READ_ENABLE;
|
|
if (ISSET(hp->sc->sc_flags,
|
|
SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
pio_func = esdhc_read_data_pio;
|
|
} else {
|
|
pio_func = sdhc_read_data_pio;
|
|
}
|
|
} else {
|
|
imask = SDHC_BUFFER_WRITE_READY;
|
|
pmask = SDHC_BUFFER_WRITE_ENABLE;
|
|
if (ISSET(hp->sc->sc_flags,
|
|
SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
pio_func = esdhc_write_data_pio;
|
|
} else {
|
|
pio_func = sdhc_write_data_pio;
|
|
}
|
|
}
|
|
datalen = cmd->c_datalen;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & imask);
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_STATUS_EN) & SDHC_TRANSFER_COMPLETE);
|
|
KASSERT(HREAD2(hp, SDHC_NINTR_SIGNAL_EN) & SDHC_TRANSFER_COMPLETE);
|
|
|
|
while (datalen > 0) {
|
|
if (!ISSET(HREAD4(hp, SDHC_PRESENT_STATE), pmask)) {
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
HSET4(hp, SDHC_NINTR_SIGNAL_EN, imask);
|
|
} else {
|
|
HSET2(hp, SDHC_NINTR_SIGNAL_EN, imask);
|
|
}
|
|
if (!sdhc_wait_intr(hp, imask, SDHC_BUFFER_TIMEOUT, false)) {
|
|
DPRINTF(1,("%s: timeout\n", __func__));
|
|
error = ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
error = sdhc_wait_state(hp, pmask, pmask);
|
|
if (error)
|
|
break;
|
|
}
|
|
|
|
len = MIN(datalen, cmd->c_blklen);
|
|
(*pio_func)(hp, data, len);
|
|
DPRINTF(2,("%s: pio data transfer %u @ %p\n",
|
|
HDEVNAME(hp), len, data));
|
|
|
|
data += len;
|
|
datalen -= len;
|
|
}
|
|
|
|
if (error == 0 && !sdhc_wait_intr(hp, SDHC_TRANSFER_COMPLETE,
|
|
SDHC_TRANSFER_TIMEOUT, false)) {
|
|
DPRINTF(1,("%s: timeout for transfer\n", __func__));
|
|
error = ETIMEDOUT;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
sdhc_read_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
|
|
{
|
|
|
|
if (((__uintptr_t)data & 3) == 0) {
|
|
while (datalen > 3) {
|
|
*(uint32_t *)data = le32toh(HREAD4(hp, SDHC_DATA));
|
|
data += 4;
|
|
datalen -= 4;
|
|
}
|
|
if (datalen > 1) {
|
|
*(uint16_t *)data = le16toh(HREAD2(hp, SDHC_DATA));
|
|
data += 2;
|
|
datalen -= 2;
|
|
}
|
|
if (datalen > 0) {
|
|
*data = HREAD1(hp, SDHC_DATA);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
} else if (((__uintptr_t)data & 1) == 0) {
|
|
while (datalen > 1) {
|
|
*(uint16_t *)data = le16toh(HREAD2(hp, SDHC_DATA));
|
|
data += 2;
|
|
datalen -= 2;
|
|
}
|
|
if (datalen > 0) {
|
|
*data = HREAD1(hp, SDHC_DATA);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
} else {
|
|
while (datalen > 0) {
|
|
*data = HREAD1(hp, SDHC_DATA);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
sdhc_write_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
|
|
{
|
|
|
|
if (((__uintptr_t)data & 3) == 0) {
|
|
while (datalen > 3) {
|
|
HWRITE4(hp, SDHC_DATA, htole32(*(uint32_t *)data));
|
|
data += 4;
|
|
datalen -= 4;
|
|
}
|
|
if (datalen > 1) {
|
|
HWRITE2(hp, SDHC_DATA, htole16(*(uint16_t *)data));
|
|
data += 2;
|
|
datalen -= 2;
|
|
}
|
|
if (datalen > 0) {
|
|
HWRITE1(hp, SDHC_DATA, *data);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
} else if (((__uintptr_t)data & 1) == 0) {
|
|
while (datalen > 1) {
|
|
HWRITE2(hp, SDHC_DATA, htole16(*(uint16_t *)data));
|
|
data += 2;
|
|
datalen -= 2;
|
|
}
|
|
if (datalen > 0) {
|
|
HWRITE1(hp, SDHC_DATA, *data);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
} else {
|
|
while (datalen > 0) {
|
|
HWRITE1(hp, SDHC_DATA, *data);
|
|
data += 1;
|
|
datalen -= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
esdhc_read_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
|
|
{
|
|
uint16_t status = HREAD2(hp, SDHC_NINTR_STATUS);
|
|
uint32_t v;
|
|
|
|
const size_t watermark = (HREAD4(hp, SDHC_WATERMARK_LEVEL) >> SDHC_WATERMARK_READ_SHIFT) & SDHC_WATERMARK_READ_MASK;
|
|
size_t count = 0;
|
|
|
|
while (datalen > 3 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
|
|
if (count == 0) {
|
|
/*
|
|
* If we've drained "watermark" words, we need to wait
|
|
* a little bit so the read FIFO can refill.
|
|
*/
|
|
sdmmc_delay(10);
|
|
count = watermark;
|
|
}
|
|
v = HREAD4(hp, SDHC_DATA);
|
|
v = le32toh(v);
|
|
*(uint32_t *)data = v;
|
|
data += 4;
|
|
datalen -= 4;
|
|
status = HREAD2(hp, SDHC_NINTR_STATUS);
|
|
count--;
|
|
}
|
|
if (datalen > 0 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
|
|
if (count == 0) {
|
|
sdmmc_delay(10);
|
|
}
|
|
v = HREAD4(hp, SDHC_DATA);
|
|
v = le32toh(v);
|
|
do {
|
|
*data++ = v;
|
|
v >>= 8;
|
|
} while (--datalen > 0);
|
|
}
|
|
}
|
|
|
|
static void
|
|
esdhc_write_data_pio(struct sdhc_host *hp, uint8_t *data, u_int datalen)
|
|
{
|
|
uint16_t status = HREAD2(hp, SDHC_NINTR_STATUS);
|
|
uint32_t v;
|
|
|
|
const size_t watermark = (HREAD4(hp, SDHC_WATERMARK_LEVEL) >> SDHC_WATERMARK_WRITE_SHIFT) & SDHC_WATERMARK_WRITE_MASK;
|
|
size_t count = watermark;
|
|
|
|
while (datalen > 3 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
|
|
if (count == 0) {
|
|
sdmmc_delay(10);
|
|
count = watermark;
|
|
}
|
|
v = *(uint32_t *)data;
|
|
v = htole32(v);
|
|
HWRITE4(hp, SDHC_DATA, v);
|
|
data += 4;
|
|
datalen -= 4;
|
|
status = HREAD2(hp, SDHC_NINTR_STATUS);
|
|
count--;
|
|
}
|
|
if (datalen > 0 && !ISSET(status, SDHC_TRANSFER_COMPLETE)) {
|
|
if (count == 0) {
|
|
sdmmc_delay(10);
|
|
}
|
|
v = *(uint32_t *)data;
|
|
v = htole32(v);
|
|
HWRITE4(hp, SDHC_DATA, v);
|
|
}
|
|
}
|
|
|
|
/* Prepare for another command. */
|
|
static int
|
|
sdhc_soft_reset(struct sdhc_host *hp, int mask)
|
|
{
|
|
int timo;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
DPRINTF(1,("%s: software reset reg=%08x\n", HDEVNAME(hp), mask));
|
|
|
|
/* Request the reset. */
|
|
HWRITE1(hp, SDHC_SOFTWARE_RESET, mask);
|
|
|
|
/*
|
|
* If necessary, wait for the controller to set the bits to
|
|
* acknowledge the reset.
|
|
*/
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_WAIT_RESET) &&
|
|
ISSET(mask, (SDHC_RESET_DAT | SDHC_RESET_CMD))) {
|
|
for (timo = 10000; timo > 0; timo--) {
|
|
if (ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET), mask))
|
|
break;
|
|
/* Short delay because I worry we may miss it... */
|
|
sdmmc_delay(1);
|
|
}
|
|
if (timo == 0) {
|
|
DPRINTF(1,("%s: timeout for reset on\n", __func__));
|
|
return ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Wait for the controller to clear the bits to indicate that
|
|
* the reset has completed.
|
|
*/
|
|
for (timo = 10; timo > 0; timo--) {
|
|
if (!ISSET(HREAD1(hp, SDHC_SOFTWARE_RESET), mask))
|
|
break;
|
|
sdmmc_delay(10000);
|
|
}
|
|
if (timo == 0) {
|
|
DPRINTF(1,("%s: timeout reg=%08x\n", HDEVNAME(hp),
|
|
HREAD1(hp, SDHC_SOFTWARE_RESET)));
|
|
return ETIMEDOUT;
|
|
}
|
|
|
|
if (ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED)) {
|
|
HSET4(hp, SDHC_DMA_CTL, SDHC_DMA_SNOOP);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sdhc_wait_intr(struct sdhc_host *hp, int mask, int timo, bool probing)
|
|
{
|
|
int status, error, nointr;
|
|
|
|
KASSERT(mutex_owned(&hp->intr_lock));
|
|
|
|
mask |= SDHC_ERROR_INTERRUPT;
|
|
|
|
nointr = 0;
|
|
status = hp->intr_status & mask;
|
|
while (status == 0) {
|
|
if (cv_timedwait(&hp->intr_cv, &hp->intr_lock, timo)
|
|
== EWOULDBLOCK) {
|
|
nointr = 1;
|
|
break;
|
|
}
|
|
status = hp->intr_status & mask;
|
|
}
|
|
error = hp->intr_error_status;
|
|
|
|
DPRINTF(2,("%s: intr status %#x error %#x\n", HDEVNAME(hp), status,
|
|
error));
|
|
|
|
hp->intr_status &= ~status;
|
|
hp->intr_error_status &= ~error;
|
|
|
|
if (ISSET(status, SDHC_ERROR_INTERRUPT)) {
|
|
if (ISSET(error, SDHC_DMA_ERROR))
|
|
device_printf(hp->sc->sc_dev,"dma error\n");
|
|
if (ISSET(error, SDHC_ADMA_ERROR))
|
|
device_printf(hp->sc->sc_dev,"adma error\n");
|
|
if (ISSET(error, SDHC_AUTO_CMD12_ERROR))
|
|
device_printf(hp->sc->sc_dev,"auto_cmd12 error\n");
|
|
if (ISSET(error, SDHC_CURRENT_LIMIT_ERROR))
|
|
device_printf(hp->sc->sc_dev,"current limit error\n");
|
|
if (ISSET(error, SDHC_DATA_END_BIT_ERROR))
|
|
device_printf(hp->sc->sc_dev,"data end bit error\n");
|
|
if (ISSET(error, SDHC_DATA_CRC_ERROR))
|
|
device_printf(hp->sc->sc_dev,"data crc error\n");
|
|
if (ISSET(error, SDHC_DATA_TIMEOUT_ERROR))
|
|
device_printf(hp->sc->sc_dev,"data timeout error\n");
|
|
if (ISSET(error, SDHC_CMD_INDEX_ERROR))
|
|
device_printf(hp->sc->sc_dev,"cmd index error\n");
|
|
if (ISSET(error, SDHC_CMD_END_BIT_ERROR))
|
|
device_printf(hp->sc->sc_dev,"cmd end bit error\n");
|
|
if (ISSET(error, SDHC_CMD_CRC_ERROR))
|
|
device_printf(hp->sc->sc_dev,"cmd crc error\n");
|
|
if (ISSET(error, SDHC_CMD_TIMEOUT_ERROR)) {
|
|
if (!probing)
|
|
device_printf(hp->sc->sc_dev,"cmd timeout error\n");
|
|
#ifdef SDHC_DEBUG
|
|
else if (sdhcdebug > 0)
|
|
device_printf(hp->sc->sc_dev,"cmd timeout (expected)\n");
|
|
#endif
|
|
}
|
|
if ((error & ~SDHC_EINTR_STATUS_MASK) != 0)
|
|
device_printf(hp->sc->sc_dev,"vendor error %#x\n",
|
|
(error & ~SDHC_EINTR_STATUS_MASK));
|
|
if (error == 0)
|
|
device_printf(hp->sc->sc_dev,"no error\n");
|
|
|
|
/* Command timeout has higher priority than command complete. */
|
|
if (ISSET(error, SDHC_CMD_TIMEOUT_ERROR))
|
|
CLR(status, SDHC_COMMAND_COMPLETE);
|
|
|
|
/* Transfer complete has higher priority than data timeout. */
|
|
if (ISSET(status, SDHC_TRANSFER_COMPLETE))
|
|
CLR(error, SDHC_DATA_TIMEOUT_ERROR);
|
|
}
|
|
|
|
if (nointr ||
|
|
(ISSET(status, SDHC_ERROR_INTERRUPT) && error)) {
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
|
|
(void)sdhc_soft_reset(hp, SDHC_RESET_CMD|SDHC_RESET_DAT);
|
|
hp->intr_error_status = 0;
|
|
status = 0;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Established by attachment driver at interrupt priority IPL_SDMMC.
|
|
*/
|
|
int
|
|
sdhc_intr(void *arg)
|
|
{
|
|
struct sdhc_softc *sc = (struct sdhc_softc *)arg;
|
|
struct sdhc_host *hp;
|
|
int done = 0;
|
|
uint16_t status;
|
|
uint16_t error;
|
|
|
|
/* We got an interrupt, but we don't know from which slot. */
|
|
for (size_t host = 0; host < sc->sc_nhosts; host++) {
|
|
hp = sc->sc_host[host];
|
|
if (hp == NULL)
|
|
continue;
|
|
|
|
mutex_enter(&hp->intr_lock);
|
|
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_32BIT_ACCESS)) {
|
|
/* Find out which interrupts are pending. */
|
|
uint32_t xstatus = HREAD4(hp, SDHC_NINTR_STATUS);
|
|
status = xstatus;
|
|
error = xstatus >> 16;
|
|
if (ISSET(sc->sc_flags, SDHC_FLAG_USDHC) &&
|
|
(xstatus & SDHC_TRANSFER_COMPLETE) &&
|
|
!(xstatus & SDHC_DMA_INTERRUPT)) {
|
|
/* read again due to uSDHC errata */
|
|
status = xstatus = HREAD4(hp,
|
|
SDHC_NINTR_STATUS);
|
|
error = xstatus >> 16;
|
|
}
|
|
if (ISSET(sc->sc_flags,
|
|
SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
if ((error & SDHC_NINTR_STATUS_MASK) != 0)
|
|
SET(status, SDHC_ERROR_INTERRUPT);
|
|
}
|
|
if (error)
|
|
xstatus |= SDHC_ERROR_INTERRUPT;
|
|
else if (!ISSET(status, SDHC_NINTR_STATUS_MASK))
|
|
goto next_port; /* no interrupt for us */
|
|
/* Acknowledge the interrupts we are about to handle. */
|
|
HWRITE4(hp, SDHC_NINTR_STATUS, xstatus);
|
|
} else {
|
|
/* Find out which interrupts are pending. */
|
|
error = 0;
|
|
status = HREAD2(hp, SDHC_NINTR_STATUS);
|
|
if (!ISSET(status, SDHC_NINTR_STATUS_MASK))
|
|
goto next_port; /* no interrupt for us */
|
|
/* Acknowledge the interrupts we are about to handle. */
|
|
HWRITE2(hp, SDHC_NINTR_STATUS, status);
|
|
if (ISSET(status, SDHC_ERROR_INTERRUPT)) {
|
|
/* Acknowledge error interrupts. */
|
|
error = HREAD2(hp, SDHC_EINTR_STATUS);
|
|
HWRITE2(hp, SDHC_EINTR_STATUS, error);
|
|
}
|
|
}
|
|
|
|
DPRINTF(2,("%s: interrupt status=%x error=%x\n", HDEVNAME(hp),
|
|
status, error));
|
|
|
|
/* Claim this interrupt. */
|
|
done = 1;
|
|
|
|
if (ISSET(status, SDHC_ERROR_INTERRUPT) &&
|
|
ISSET(error, SDHC_ADMA_ERROR)) {
|
|
uint8_t adma_err = HREAD1(hp, SDHC_ADMA_ERROR_STATUS);
|
|
printf("%s: ADMA error, status %02x\n", HDEVNAME(hp),
|
|
adma_err);
|
|
}
|
|
|
|
/*
|
|
* Wake up the sdmmc event thread to scan for cards.
|
|
*/
|
|
if (ISSET(status, SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION)) {
|
|
if (hp->sdmmc != NULL) {
|
|
sdmmc_needs_discover(hp->sdmmc);
|
|
}
|
|
if (ISSET(sc->sc_flags,
|
|
SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
HCLR4(hp, SDHC_NINTR_STATUS_EN,
|
|
status & (SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION));
|
|
HCLR4(hp, SDHC_NINTR_SIGNAL_EN,
|
|
status & (SDHC_CARD_REMOVAL|SDHC_CARD_INSERTION));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Schedule re-tuning process (UHS).
|
|
*/
|
|
if (ISSET(status, SDHC_RETUNING_EVENT)) {
|
|
atomic_swap_uint(&hp->tuning_timer_pending, 1);
|
|
}
|
|
|
|
/*
|
|
* Wake up the blocking process to service command
|
|
* related interrupt(s).
|
|
*/
|
|
if (ISSET(status, SDHC_COMMAND_COMPLETE|SDHC_ERROR_INTERRUPT|
|
|
SDHC_BUFFER_READ_READY|SDHC_BUFFER_WRITE_READY|
|
|
SDHC_TRANSFER_COMPLETE|SDHC_DMA_INTERRUPT)) {
|
|
hp->intr_error_status |= error;
|
|
hp->intr_status |= status;
|
|
if (ISSET(sc->sc_flags,
|
|
SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)) {
|
|
HCLR4(hp, SDHC_NINTR_SIGNAL_EN,
|
|
status & (SDHC_BUFFER_READ_READY|SDHC_BUFFER_WRITE_READY));
|
|
}
|
|
cv_broadcast(&hp->intr_cv);
|
|
}
|
|
|
|
/*
|
|
* Service SD card interrupts.
|
|
*/
|
|
if (!ISSET(sc->sc_flags, SDHC_FLAG_ENHANCED | SDHC_FLAG_USDHC)
|
|
&& ISSET(status, SDHC_CARD_INTERRUPT)) {
|
|
DPRINTF(0,("%s: card interrupt\n", HDEVNAME(hp)));
|
|
HCLR2(hp, SDHC_NINTR_STATUS_EN, SDHC_CARD_INTERRUPT);
|
|
sdmmc_card_intr(hp->sdmmc);
|
|
}
|
|
next_port:
|
|
mutex_exit(&hp->intr_lock);
|
|
}
|
|
|
|
return done;
|
|
}
|
|
|
|
kmutex_t *
|
|
sdhc_host_lock(struct sdhc_host *hp)
|
|
{
|
|
return &hp->intr_lock;
|
|
}
|
|
|
|
#ifdef SDHC_DEBUG
|
|
void
|
|
sdhc_dump_regs(struct sdhc_host *hp)
|
|
{
|
|
|
|
printf("0x%02x PRESENT_STATE: %x\n", SDHC_PRESENT_STATE,
|
|
HREAD4(hp, SDHC_PRESENT_STATE));
|
|
if (!ISSET(hp->sc->sc_flags, SDHC_FLAG_ENHANCED))
|
|
printf("0x%02x POWER_CTL: %x\n", SDHC_POWER_CTL,
|
|
HREAD1(hp, SDHC_POWER_CTL));
|
|
printf("0x%02x NINTR_STATUS: %x\n", SDHC_NINTR_STATUS,
|
|
HREAD2(hp, SDHC_NINTR_STATUS));
|
|
printf("0x%02x EINTR_STATUS: %x\n", SDHC_EINTR_STATUS,
|
|
HREAD2(hp, SDHC_EINTR_STATUS));
|
|
printf("0x%02x NINTR_STATUS_EN: %x\n", SDHC_NINTR_STATUS_EN,
|
|
HREAD2(hp, SDHC_NINTR_STATUS_EN));
|
|
printf("0x%02x EINTR_STATUS_EN: %x\n", SDHC_EINTR_STATUS_EN,
|
|
HREAD2(hp, SDHC_EINTR_STATUS_EN));
|
|
printf("0x%02x NINTR_SIGNAL_EN: %x\n", SDHC_NINTR_SIGNAL_EN,
|
|
HREAD2(hp, SDHC_NINTR_SIGNAL_EN));
|
|
printf("0x%02x EINTR_SIGNAL_EN: %x\n", SDHC_EINTR_SIGNAL_EN,
|
|
HREAD2(hp, SDHC_EINTR_SIGNAL_EN));
|
|
printf("0x%02x CAPABILITIES: %x\n", SDHC_CAPABILITIES,
|
|
HREAD4(hp, SDHC_CAPABILITIES));
|
|
printf("0x%02x MAX_CAPABILITIES: %x\n", SDHC_MAX_CAPABILITIES,
|
|
HREAD4(hp, SDHC_MAX_CAPABILITIES));
|
|
}
|
|
#endif
|