NetBSD/sys/netinet6/in6_pcb.c
itojun e1f4f77960 to sync with kame better, (1) remove register declaration for variables,
(2) sync whitespaces, (3) update comments. (4) bring in some of portability
and logging enhancements.  no functional changes here.
2001-02-10 04:14:26 +00:00

821 lines
22 KiB
C

/* $NetBSD: in6_pcb.c,v 1.34 2001/02/10 04:14:27 itojun Exp $ */
/* $KAME: in6_pcb.c,v 1.64 2000/10/01 12:37:20 itojun Exp $ */
/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
*/
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/proc.h>
#include <net/if.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/nd6.h>
#include "loop.h"
extern struct ifnet loif[NLOOP];
#include "faith.h"
#ifdef IPSEC
#include <netinet6/ipsec.h>
#include <netkey/key.h>
#endif /* IPSEC */
struct in6_addr zeroin6_addr;
int ip6_anonportmin = IPV6PORT_ANONMIN;
int ip6_anonportmax = IPV6PORT_ANONMAX;
int ip6_lowportmin = IPV6PORT_RESERVEDMIN;
int ip6_lowportmax = IPV6PORT_RESERVEDMAX;
int
in6_pcballoc(so, head)
struct socket *so;
struct in6pcb *head;
{
struct in6pcb *in6p;
MALLOC(in6p, struct in6pcb *, sizeof(*in6p), M_PCB, M_NOWAIT);
if (in6p == NULL)
return(ENOBUFS);
bzero((caddr_t)in6p, sizeof(*in6p));
in6p->in6p_head = head;
in6p->in6p_socket = so;
in6p->in6p_hops = -1; /* use kernel default */
in6p->in6p_icmp6filt = NULL;
in6p->in6p_next = head->in6p_next;
head->in6p_next = in6p;
in6p->in6p_prev = head;
in6p->in6p_next->in6p_prev = in6p;
#ifndef INET6_BINDV6ONLY
if (ip6_bindv6only)
in6p->in6p_flags |= IN6P_BINDV6ONLY;
#else
in6p->in6p_flags |= IN6P_BINDV6ONLY; /*just for safety*/
#endif
so->so_pcb = (caddr_t)in6p;
return(0);
}
int
in6_pcbbind(in6p, nam, p)
struct in6pcb *in6p;
struct mbuf *nam;
struct proc *p;
{
struct socket *so = in6p->in6p_socket;
struct in6pcb *head = in6p->in6p_head;
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
u_int16_t lport = 0;
int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
if (in6p->in6p_lport || !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
return(EINVAL);
if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
(so->so_options & SO_ACCEPTCONN) == 0))
wild = IN6PLOOKUP_WILDCARD;
if (nam) {
sin6 = mtod(nam, struct sockaddr_in6 *);
if (nam->m_len != sizeof(*sin6))
return(EINVAL);
/*
* We should check the family, but old programs
* incorrectly fail to intialize it.
*/
if (sin6->sin6_family != AF_INET6)
return(EAFNOSUPPORT);
/*
* since we do not check port number duplicate with IPv4 space,
* we reject it at this moment. If we leave it, we make normal
* user to hijack port number from other users.
*/
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr))
return(EADDRNOTAVAIL);
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0)
return EINVAL;
/* this must be cleared for ifa_ifwithaddr() */
sin6->sin6_scope_id = 0;
lport = sin6->sin6_port;
if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
/*
* Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
* allow compepte duplication of binding if
* SO_REUSEPORT is set, or if SO_REUSEADDR is set
* and a multicast address is bound on both
* new and duplicated sockets.
*/
if (so->so_options & SO_REUSEADDR)
reuseport = SO_REUSEADDR|SO_REUSEPORT;
} else if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
bzero(&sin, sizeof(sin));
sin.sin_len = sizeof(sin);
sin.sin_family = AF_INET;
bcopy(&sin6->sin6_addr.s6_addr32[3], &sin.sin_addr,
sizeof(sin.sin_addr));
if (ifa_ifwithaddr((struct sockaddr *)&sin) == 0)
return EADDRNOTAVAIL;
} else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
struct ifaddr *ia = NULL;
sin6->sin6_port = 0; /* yech... */
#if defined(NFAITH) && NFAITH > 0
if ((in6p->in6p_flags & IN6P_FAITH) == 0
&& (ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
#else
if ((ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
#endif
return(EADDRNOTAVAIL);
/*
* XXX: bind to an anycast address might accidentally
* cause sending a packet with anycast source address.
*/
if (ia &&
((struct in6_ifaddr *)ia)->ia6_flags &
(IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|
IN6_IFF_DETACHED|IN6_IFF_DEPRECATED)) {
return(EADDRNOTAVAIL);
}
}
if (lport) {
#ifndef IPNOPRIVPORTS
int priv;
/*
* NOTE: all operating systems use suser() for
* privilege check! do not rewrite it into SS_PRIV.
*/
priv = (p && !suser(p->p_ucred, &p->p_acflag)) ? 1 : 0;
/* GROSS */
if (ntohs(lport) < IPV6PORT_RESERVED && !priv)
return(EACCES);
#endif
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
/* should check this but we can't ... */
#if 0
struct inpcb *t;
t = in_pcblookup_bind(&tcbtable,
(struct in_addr *)&sin6->sin6_addr.s6_addr32[3],
lport);
if (t && (reuseport & t->inp_socket->so_options) == 0)
return EADDRINUSE;
#endif
} else {
struct in6pcb *t;
t = in6_pcblookup(head, &zeroin6_addr, 0,
&sin6->sin6_addr, lport, wild);
if (t && (reuseport & t->in6p_socket->so_options) == 0)
return(EADDRINUSE);
}
}
in6p->in6p_laddr = sin6->sin6_addr;
}
if (lport == 0) {
int e;
if ((e = in6_pcbsetport(&in6p->in6p_laddr, in6p)) != 0)
return(e);
}
else
in6p->in6p_lport = lport;
in6p->in6p_flowinfo = sin6 ? sin6->sin6_flowinfo : 0; /*XXX*/
return(0);
}
/*
* Connect from a socket to a specified address.
* Both address and port must be specified in argument sin6.
* If don't have a local address for this socket yet,
* then pick one.
*/
int
in6_pcbconnect(in6p, nam)
struct in6pcb *in6p;
struct mbuf *nam;
{
struct in6_addr *in6a = NULL;
struct sockaddr_in6 *sin6 = mtod(nam, struct sockaddr_in6 *);
struct ifnet *ifp = NULL; /* outgoing interface */
int error = 0;
#ifdef INET
struct in6_addr mapped;
#endif
struct sockaddr_in6 tmp;
(void)&in6a; /* XXX fool gcc */
if (nam->m_len != sizeof(*sin6))
return(EINVAL);
if (sin6->sin6_family != AF_INET6)
return(EAFNOSUPPORT);
if (sin6->sin6_port == 0)
return(EADDRNOTAVAIL);
/* sanity check for mapped address case */
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
in6p->in6p_laddr.s6_addr16[5] = htons(0xffff);
if (!IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr))
return EINVAL;
} else {
if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr))
return EINVAL;
}
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, &ifp) != 0)
return EINVAL;
/* Source address selection. */
if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
&& in6p->in6p_laddr.s6_addr32[3] == 0) {
#ifdef INET
struct sockaddr_in sin, *sinp;
bzero(&sin, sizeof(sin));
sin.sin_len = sizeof(sin);
sin.sin_family = AF_INET;
bcopy(&sin6->sin6_addr.s6_addr32[3], &sin.sin_addr,
sizeof(sin.sin_addr));
sinp = in_selectsrc(&sin, (struct route *)&in6p->in6p_route,
in6p->in6p_socket->so_options, NULL, &error);
if (sinp == 0) {
if (error == 0)
error = EADDRNOTAVAIL;
return(error);
}
bzero(&mapped, sizeof(mapped));
mapped.s6_addr16[5] = htons(0xffff);
bcopy(&sinp->sin_addr, &mapped.s6_addr32[3], sizeof(sinp->sin_addr));
in6a = &mapped;
#else
return EADDRNOTAVAIL;
#endif
} else {
/*
* XXX: in6_selectsrc might replace the bound local address
* with the address specified by setsockopt(IPV6_PKTINFO).
* Is it the intended behavior?
*/
in6a = in6_selectsrc(sin6, in6p->in6p_outputopts,
in6p->in6p_moptions,
&in6p->in6p_route,
&in6p->in6p_laddr, &error);
if (in6a == 0) {
if (error == 0)
error = EADDRNOTAVAIL;
return(error);
}
}
if (in6p->in6p_route.ro_rt)
ifp = in6p->in6p_route.ro_rt->rt_ifp;
in6p->in6p_ip6.ip6_hlim = (u_int8_t)in6_selecthlim(in6p, ifp);
if (in6_pcblookup(in6p->in6p_head,
&sin6->sin6_addr,
sin6->sin6_port,
IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) ?
in6a : &in6p->in6p_laddr,
in6p->in6p_lport,
0))
return(EADDRINUSE);
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)
|| (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
&& in6p->in6p_laddr.s6_addr32[3] == 0)) {
if (in6p->in6p_lport == 0) {
#ifdef __NetBSD__
(void)in6_pcbbind(in6p, (struct mbuf *)0,
(struct proc *)0);
#else
(void)in6_pcbbind(in6p, (struct mbuf *)0);
#endif
}
in6p->in6p_laddr = *in6a;
}
in6p->in6p_faddr = sin6->sin6_addr;
in6p->in6p_fport = sin6->sin6_port;
/*
* xxx kazu flowlabel is necessary for connect?
* but if this line is missing, the garbage value remains.
*/
in6p->in6p_flowinfo = sin6->sin6_flowinfo;
return(0);
}
void
in6_pcbdisconnect(in6p)
struct in6pcb *in6p;
{
bzero((caddr_t)&in6p->in6p_faddr, sizeof(in6p->in6p_faddr));
in6p->in6p_fport = 0;
if (in6p->in6p_socket->so_state & SS_NOFDREF)
in6_pcbdetach(in6p);
}
void
in6_pcbdetach(in6p)
struct in6pcb *in6p;
{
struct socket *so = in6p->in6p_socket;
#ifdef IPSEC
ipsec6_delete_pcbpolicy(in6p);
#endif /* IPSEC */
sotoin6pcb(so) = 0;
sofree(so);
if (in6p->in6p_options)
m_freem(in6p->in6p_options);
if (in6p->in6p_outputopts) {
if (in6p->in6p_outputopts->ip6po_rthdr &&
in6p->in6p_outputopts->ip6po_route.ro_rt)
RTFREE(in6p->in6p_outputopts->ip6po_route.ro_rt);
if (in6p->in6p_outputopts->ip6po_m)
(void)m_free(in6p->in6p_outputopts->ip6po_m);
free(in6p->in6p_outputopts, M_IP6OPT);
}
if (in6p->in6p_route.ro_rt)
rtfree(in6p->in6p_route.ro_rt);
ip6_freemoptions(in6p->in6p_moptions);
in6p->in6p_next->in6p_prev = in6p->in6p_prev;
in6p->in6p_prev->in6p_next = in6p->in6p_next;
in6p->in6p_prev = NULL;
FREE(in6p, M_PCB);
}
void
in6_setsockaddr(in6p, nam)
struct in6pcb *in6p;
struct mbuf *nam;
{
struct sockaddr_in6 *sin6;
nam->m_len = sizeof(*sin6);
sin6 = mtod(nam, struct sockaddr_in6 *);
bzero((caddr_t)sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = in6p->in6p_lport;
/* KAME hack: recover scopeid */
(void)in6_recoverscope(sin6, &in6p->in6p_laddr, NULL);
}
void
in6_setpeeraddr(in6p, nam)
struct in6pcb *in6p;
struct mbuf *nam;
{
struct sockaddr_in6 *sin6;
nam->m_len = sizeof(*sin6);
sin6 = mtod(nam, struct sockaddr_in6 *);
bzero((caddr_t)sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = in6p->in6p_fport;
/* KAME hack: recover scopeid */
(void)in6_recoverscope(sin6, &in6p->in6p_faddr, NULL);
}
/*
* Pass some notification to all connections of a protocol
* associated with address dst. The local address and/or port numbers
* may be specified to limit the search. The "usual action" will be
* taken, depending on the ctlinput cmd. The caller must filter any
* cmds that are uninteresting (e.g., no error in the map).
* Call the protocol specific routine (if any) to report
* any errors for each matching socket.
*
* Must be called at splsoftnet.
*/
int
in6_pcbnotify(head, dst, fport_arg, laddr6, lport_arg, cmd, notify)
struct in6pcb *head;
struct sockaddr *dst;
u_int fport_arg, lport_arg;
struct in6_addr *laddr6;
int cmd;
void (*notify) __P((struct in6pcb *, int));
{
struct in6pcb *in6p, *nin6p;
struct in6_addr faddr6;
u_int16_t fport = fport_arg, lport = lport_arg;
int errno;
int nmatch = 0;
int do_rtchange = (notify == in6_rtchange);
if ((unsigned)cmd > PRC_NCMDS || dst->sa_family != AF_INET6)
return 0;
faddr6 = ((struct sockaddr_in6 *)dst)->sin6_addr;
if (IN6_IS_ADDR_UNSPECIFIED(&faddr6))
return 0;
/*
* Redirects go to all references to the destination,
* and use in6_rtchange to invalidate the route cache.
* Dead host indications: also use in6_rtchange to invalidate
* the cache, and deliver the error to all the sockets.
* Otherwise, if we have knowledge of the local port and address,
* deliver only to that socket.
*/
if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
fport = 0;
lport = 0;
bzero((caddr_t)laddr6, sizeof(*laddr6));
do_rtchange = 1;
}
if (notify == NULL)
return 0;
errno = inet6ctlerrmap[cmd];
for (in6p = head->in6p_next; in6p != head; in6p = nin6p) {
nin6p = in6p->in6p_next;
if (do_rtchange) {
/*
* Since a non-connected PCB might have a cached route,
* we always call in6_rtchange without matching
* the PCB to the src/dst pair.
*
* XXX: we assume in6_rtchange does not free the PCB.
*/
if (IN6_ARE_ADDR_EQUAL(&in6p->in6p_route.ro_dst.sin6_addr,
&faddr6)) {
in6_rtchange(in6p, errno);
if (notify == in6_rtchange) {
/* there's nothing to do any more */
continue;
}
}
}
/* at this point, we can assume that NOTIFY is not NULL. */
if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, &faddr6) ||
in6p->in6p_socket == 0 ||
(lport && in6p->in6p_lport != lport) ||
(!IN6_IS_ADDR_UNSPECIFIED(laddr6) &&
!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6)) ||
(fport && in6p->in6p_fport != fport))
continue;
(*notify)(in6p, errno);
nmatch++;
}
return nmatch;
}
void
in6_pcbpurgeif(head, ifp)
struct in6pcb *head;
struct ifnet *ifp;
{
struct in6pcb *in6p, *nin6p;
for (in6p = head->in6p_next; in6p != head; in6p = nin6p) {
nin6p = in6p->in6p_next;
if (in6p->in6p_route.ro_rt != NULL &&
in6p->in6p_route.ro_rt->rt_ifp == ifp)
in6_rtchange(in6p, 0);
}
}
/*
* Check for alternatives when higher level complains
* about service problems. For now, invalidate cached
* routing information. If the route was created dynamically
* (by a redirect), time to try a default gateway again.
*/
void
in6_losing(in6p)
struct in6pcb *in6p;
{
struct rtentry *rt;
struct rt_addrinfo info;
if ((rt = in6p->in6p_route.ro_rt) != NULL) {
in6p->in6p_route.ro_rt = 0;
bzero((caddr_t)&info, sizeof(info));
info.rti_info[RTAX_DST] =
(struct sockaddr *)&in6p->in6p_route.ro_dst;
info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
info.rti_info[RTAX_NETMASK] = rt_mask(rt);
rt_missmsg(RTM_LOSING, &info, rt->rt_flags, 0);
if (rt->rt_flags & RTF_DYNAMIC)
(void)rtrequest(RTM_DELETE, rt_key(rt),
rt->rt_gateway, rt_mask(rt), rt->rt_flags,
(struct rtentry **)0);
else
/*
* A new route can be allocated
* the next time output is attempted.
*/
rtfree(rt);
}
}
/*
* After a routing change, flush old routing
* and allocate a (hopefully) better one.
*/
void
in6_rtchange(in6p, errno)
struct in6pcb *in6p;
int errno;
{
if (in6p->in6p_route.ro_rt) {
rtfree(in6p->in6p_route.ro_rt);
in6p->in6p_route.ro_rt = 0;
/*
* A new route can be allocated the next time
* output is attempted.
*/
}
}
struct in6pcb *
in6_pcblookup(head, faddr6, fport_arg, laddr6, lport_arg, flags)
struct in6pcb *head;
struct in6_addr *faddr6, *laddr6;
u_int fport_arg, lport_arg;
int flags;
{
struct in6pcb *in6p, *match = 0;
int matchwild = 3, wildcard;
u_int16_t fport = fport_arg, lport = lport_arg;
for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
if (in6p->in6p_lport != lport)
continue;
wildcard = 0;
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
if (IN6_IS_ADDR_UNSPECIFIED(laddr6))
wildcard++;
else if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
continue;
}
else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)
&& in6p->in6p_laddr.s6_addr32[3] == 0) {
if (!IN6_IS_ADDR_V4MAPPED(laddr6))
continue;
if (laddr6->s6_addr32[3] == 0)
;
else
wildcard++;
}
else {
if (IN6_IS_ADDR_V4MAPPED(laddr6)) {
#ifndef INET6_BINDV6ONLY
if (in6p->in6p_flags & IN6P_BINDV6ONLY)
continue;
else
wildcard++;
#else
continue;
#endif
} else if (!IN6_IS_ADDR_UNSPECIFIED(laddr6))
wildcard++;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
if (IN6_IS_ADDR_UNSPECIFIED(faddr6))
wildcard++;
else if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, faddr6)
|| in6p->in6p_fport != fport)
continue;
}
else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)
&& in6p->in6p_faddr.s6_addr32[3] == 0) {
if (!IN6_IS_ADDR_V4MAPPED(faddr6))
continue;
if (faddr6->s6_addr32[3] == 0)
;
else
wildcard++;
}
else {
if (IN6_IS_ADDR_V4MAPPED(faddr6)) {
#ifndef INET6_BINDV6ONLY
if (in6p->in6p_flags & IN6P_BINDV6ONLY)
continue;
else
wildcard++;
#else
continue;
#endif
} else if (!IN6_IS_ADDR_UNSPECIFIED(faddr6))
wildcard++;
}
if (wildcard && (flags & IN6PLOOKUP_WILDCARD) == 0)
continue;
if (wildcard < matchwild) {
match = in6p;
matchwild = wildcard;
if (matchwild == 0)
break;
}
}
return(match);
}
struct rtentry *
in6_pcbrtentry(in6p)
struct in6pcb *in6p;
{
struct route_in6 *ro;
struct sockaddr_in6 *dst6;
ro = &in6p->in6p_route;
dst6 = (struct sockaddr_in6 *)&ro->ro_dst;
if (ro->ro_rt == NULL) {
/*
* No route yet, so try to acquire one.
*/
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
bzero(dst6, sizeof(*dst6));
dst6->sin6_family = AF_INET6;
dst6->sin6_len = sizeof(struct sockaddr_in6);
dst6->sin6_addr = in6p->in6p_faddr;
rtalloc((struct route *)ro);
}
}
return (ro->ro_rt);
}
struct in6pcb *
in6_pcblookup_connect(head, faddr6, fport_arg, laddr6, lport_arg, faith)
struct in6pcb *head;
struct in6_addr *faddr6, *laddr6;
u_int fport_arg, lport_arg;
int faith;
{
struct in6pcb *in6p;
u_int16_t fport = fport_arg, lport = lport_arg;
for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
/* find exact match on both source and dest */
if (in6p->in6p_fport != fport)
continue;
if (in6p->in6p_lport != lport)
continue;
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr))
continue;
if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, faddr6))
continue;
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr))
continue;
if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
continue;
return in6p;
}
return NULL;
}
struct in6pcb *
in6_pcblookup_bind(head, laddr6, lport_arg, faith)
struct in6pcb *head;
struct in6_addr *laddr6;
u_int lport_arg;
int faith;
{
struct in6pcb *in6p, *match;
u_int16_t lport = lport_arg;
match = NULL;
for (in6p = head->in6p_next; in6p != head; in6p = in6p->in6p_next) {
/*
* find destination match. exact match is preferred
* against wildcard match.
*/
#if defined(NFAITH) && NFAITH > 0
if (faith && (in6p->in6p_flags & IN6P_FAITH) == 0)
continue;
#endif
if (in6p->in6p_fport != 0)
continue;
if (in6p->in6p_lport != lport)
continue;
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
if (IN6_IS_ADDR_V4MAPPED(laddr6)) {
#ifndef INET6_BINDV6ONLY
if (in6p->in6p_flags & IN6P_BINDV6ONLY)
continue;
else
match = in6p;
#else
continue;
#endif
} else
match = in6p;
}
else if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr) &&
in6p->in6p_laddr.s6_addr32[3] == 0) {
if (IN6_IS_ADDR_V4MAPPED(laddr6) &&
laddr6->s6_addr32[3] != 0)
match = in6p;
}
else if (IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, laddr6))
return in6p;
}
return match;
}