NetBSD/sys/arch/hpcmips/dev/ucb1200reg.h

227 lines
7.6 KiB
C

/* $NetBSD: ucb1200reg.h,v 1.5 2000/03/12 15:36:11 uch Exp $ */
/*
* Copyright (c) 2000, by UCHIYAMA Yasushi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the developer may NOT be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* PHILIPS UCB1200 Advanced modem/audio analog front-end
*/
/* Internal register. access via SIB */
#define UCB1200_IO_DATA_REG 0
#define UCB1200_IO_DIR_REG 1
#define UCB1200_POSINTEN_REG 2
#define UCB1200_NEGINTEN_REG 3
#define UCB1200_INTSTAT_REG 4
#define UCB1200_TELECOMCTRLA_REG 5
#define UCB1200_TELECOMCTRLB_REG 6
#define UCB1200_AUDIOCTRLA_REG 7
#define UCB1200_AUDIOCTRLB_REG 8
#define UCB1200_TSCTRL_REG 9
#define UCB1200_ADCCTRL_REG 10
#define UCB1200_ADCDATA_REG 11
#define UCB1200_ID_REG 12
#define UCB1200_MODE_REG 13
#define UCB1200_RESERVED_REG 14
#define UCB1200_NULL_REG 15 /* always returns 0xffff */
/*
* I/O port data register
*/
#define UCB1200_IOPORT_MAX 10
#define UCB1200_IO_DATA_SPEAKER 0x100 /* XXX general? */
/*
* Telecom control register A
*/
#define UCB1200_TELECOMCTRLA_DIV_MIN 16
#define UCB1200_TELECOMCTRLA_DIV_MAX 127
#define UCB1200_TELECOMCTRLA_DIV_SHIFT 0
#define UCB1200_TELECOMCTRLA_DIV_MASK 0x7f
#define UCB1200_TELECOMCTRLA_DIV(cr) \
(((cr) >> UCB1200_TELECOMCTRLA_DIV_SHIFT) & \
UCB1200_TELECOMCTRLA_DIV_MASK)
#define UCB1200_TELECOMCTRLA_DIV_SET(cr, val) \
((cr) | (((val) << UCB1200_TELECOMCTRLA_DIV_SHIFT) & \
(UCB1200_TELECOMCTRLA_DIV_MASK << UCB1200_TELECOMCTRLA_DIV_SHIFT)))
#define UCB1200_TELECOMCTRLA_LOOP 0x0080
/*
* Telecom control register B
*/
#define UCB1200_TELECOMCTRLB_VBF 0x0008
#define UCB1200_TELECOMCTRLB_CLIPSTATCLR 0x0010
#define UCB1200_TELECOMCTRLB_ATT 0x0040
#define UCB1200_TELECOMCTRLB_STS 0x0800
#define UCB1200_TELECOMCTRLB_MUTE 0x2000
#define UCB1200_TELECOMCTRLB_INEN 0x4000
#define UCB1200_TELECOMCTRLB_OUTEN 0x8000
/*
* Audio control register A
*/
#define UCB1200_AUDIOCTRLA_DIV_MIN 6
#define UCB1200_AUDIOCTRLA_DIV_MAX 127
#define UCB1200_AUDIOCTRLA_DIV_SHIFT 0
#define UCB1200_AUDIOCTRLA_DIV_MASK 0x7f
#define UCB1200_AUDIOCTRLA_DIV(cr) \
(((cr) >> UCB1200_AUDIOCTRLA_DIV_SHIFT) & \
UCB1200_AUDIOCTRLA_DIV_MASK)
#define UCB1200_AUDIOCTRLA_DIV_SET(cr, val) \
((cr) | (((val) << UCB1200_AUDIOCTRLA_DIV_SHIFT) & \
(UCB1200_AUDIOCTRLA_DIV_MASK << UCB1200_AUDIOCTRLA_DIV_SHIFT)))
#define UCB1200_AUDIOCTRLA_GAIN_SHIFT 7
#define UCB1200_AUDIOCTRLA_GAIN_MASK 0x1f
#define UCB1200_AUDIOCTRLA_GAIN(cr) \
(((cr) >> UCB1200_AUDIOCTRLA_GAIN_SHIFT) & \
UCB1200_AUDIOCTRLA_GAIN_MASK)
#define UCB1200_AUDIOCTRLA_GAIN_SET(cr, val) \
((cr) | (((val) << UCB1200_AUDIOCTRLA_GAIN_SHIFT) & \
(UCB1200_AUDIOCTRLA_GAIN_MASK << UCB1200_AUDIOCTRLA_GAIN_SHIFT)))
/*
* Audio control register B
*/
#define UCB1200_AUDIOCTRLB_ATT_MIN 0
#define UCB1200_AUDIOCTRLB_ATT_MAX 0x1f
#define UCB1200_AUDIOCTRLB_ATT_SHIFT 0
#define UCB1200_AUDIOCTRLB_ATT_MASK 0x1f
#define UCB1200_AUDIOCTRLB_ATT(cr) \
(((cr) >> UCB1200_AUDIOCTRLB_ATT_SHIFT) & \
UCB1200_AUDIOCTRLB_ATT_MASK)
#define UCB1200_AUDIOCTRLB_ATT_CLR(cr) \
((cr) & ~(UCB1200_AUDIOCTRLB_ATT_MASK << \
UCB1200_AUDIOCTRLB_ATT_SHIFT))
#define UCB1200_AUDIOCTRLB_ATT_SET(cr, val) \
((cr) | (((val) << UCB1200_AUDIOCTRLB_ATT_SHIFT) & \
(UCB1200_AUDIOCTRLB_ATT_MASK << UCB1200_AUDIOCTRLB_ATT_SHIFT)))
#define UCB1200_AUDIOCTRLB_CLIPSTATCLR 0x0040
#define UCB1200_AUDIOCTRLB_LOOP 0x0100
#define UCB1200_AUDIOCTRLB_MUTE 0x2000
#define UCB1200_AUDIOCTRLB_INEN 0x4000
#define UCB1200_AUDIOCTRLB_OUTEN 0x8000
/*
* Touch screen control register
*/
#define UCB1200_TSCTRL_MXLOW 0x00002000
#define UCB1200_TSCTRL_PXLOW 0x00001000
#define UCB1200_TSCTRL_BIAS 0x00000800
#define UCB1200_TSCTRL_MODE_SHIFT 8
#define UCB1200_TSCTRL_MODE_MASK 0x7f
#define UCB1200_TSCTRL_MODE(cr) \
(((cr) >> UCB1200_TSCTRL_MODE_SHIFT) & \
UCB1200_TSCTRL_MODE_MASK)
#define UCB1200_TSCTRL_MODE_INTERRUPT 0
#define UCB1200_TSCTRL_MODE_PRESSURE (1 << UCB1200_TSCTRL_MODE_SHIFT)
#define UCB1200_TSCTRL_MODE_POSITION0 (2 << UCB1200_TSCTRL_MODE_SHIFT)
#define UCB1200_TSCTRL_MODE_POSITION1 (3 << UCB1200_TSCTRL_MODE_SHIFT)
#define UCB1200_TSCTRL_PYGND 0x00000080
#define UCB1200_TSCTRL_MYGND 0x00000040
#define UCB1200_TSCTRL_PXGND 0x00000020
#define UCB1200_TSCTRL_MXGND 0x00000010
#define UCB1200_TSCTRL_PYPWR 0x00000008
#define UCB1200_TSCTRL_MYPWR 0x00000004
#define UCB1200_TSCTRL_PXPWR 0x00000002
#define UCB1200_TSCTRL_MXPWR 0x00000001
/* touch screen modes */
#define UCB1200_TSCTRL_YPOSITION \
(UCB1200_TSCTRL_PXPWR | UCB1200_TSCTRL_MXGND | \
UCB1200_TSCTRL_MODE_POSITION0 | UCB1200_TSCTRL_BIAS)
#define UCB1200_TSCTRL_XPOSITION \
(UCB1200_TSCTRL_PYPWR | UCB1200_TSCTRL_MYGND | \
UCB1200_TSCTRL_MODE_POSITION0 | UCB1200_TSCTRL_BIAS)
#define UCB1200_TSCTRL_PRESSURE \
(UCB1200_TSCTRL_PXPWR | UCB1200_TSCTRL_MXPWR | \
UCB1200_TSCTRL_PYGND | UCB1200_TSCTRL_MYGND | \
UCB1200_TSCTRL_MODE_PRESSURE | UCB1200_TSCTRL_BIAS)
#define UCB1200_TSCTRL_INTERRUPT \
(UCB1200_TSCTRL_PXPWR | UCB1200_TSCTRL_MXPWR | \
UCB1200_TSCTRL_PYGND | UCB1200_TSCTRL_MYGND | \
UCB1200_TSCTRL_MODE_INTERRUPT)
#define UCB1200_TSCTRL_PRESSURE1
#define UCB1200_TSCTRL_PRESSURE2
#define UCB1200_TSCTRL_PRESSURE3
#define UCB1200_TSCTRL_PRESSURE4
#define UCB1200_TSCTRL_PRESSURE5
#define UCB1200_TSCTRL_XRESISTANCE
#define UCB1200_TSCTRL_YRESISTANCE
/*
* ADC control register
*/
#define UCB1200_ADCCTRL_ENABLE 0x8000
#define UCB1200_ADCCTRL_START 0x0080
#define UCB1200_ADCCTRL_EXTREF 0x0020
#define UCB1200_ADCCTRL_INPUT_SHIFT 2
#define UCB1200_ADCCTRL_INPUT_MASK 0x7
#define UCB1200_ADCCTRL_INPUT_SET(cr, val) \
((cr) | (((val) << UCB1200_ADCCTRL_INPUT_SHIFT) & \
(UCB1200_ADCCTRL_INPUT_MASK << UCB1200_ADCCTRL_INPUT_SHIFT)))
#define UCB1200_ADCCTRL_INPUT_TSPX 0x0
#define UCB1200_ADCCTRL_INPUT_TSMX 0x1
#define UCB1200_ADCCTRL_INPUT_TSPY 0x2
#define UCB1200_ADCCTRL_INPUT_TSMY 0x3
#define UCB1200_ADCCTRL_INPUT_AD0 0x4
#define UCB1200_ADCCTRL_INPUT_AD1 0x5
#define UCB1200_ADCCTRL_INPUT_AD2 0x6
#define UCB1200_ADCCTRL_INPUT_AD3 0x7
#define UCB1200_ADCCTRL_VREFBYP 0x0002
#define UCB1200_ADCCTRL_SYNCMODE 0x0001
/*
* ADC data register
*/
#define UCB1200_ADCDATA_INPROGRESS 0x8000
#define UCB1200_ADCDATA_SHIFT 5
#define UCB1200_ADCDATA_MASK 0x3ff
#define UCB1200_ADCDATA(cr) \
(((cr) >> UCB1200_ADCDATA_SHIFT) & \
UCB1200_ADCDATA_MASK)
/*
* ID register
*/
/* PHILIPS products */
/* Version 3, Device 0, Supplier 1 */
#define UCB1100_ID 0x1003
/* Version 4, Device 0, Supplier 1 */
#define UCB1200_ID 0x1004
/* Version 10, Device 0, Supplier 1 */
#define UCB1300_ID 0x100a
/* TOSHIBA TC35413F */
#define TC35413F_ID 0x9712