Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e12540ddf3
NetBSD/gnu/libexec/uucp/uucp.info-3
cgd 61f282557f initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00

1194 lines
49 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Info file uucp.info, produced by Makeinfo, -*- Text -*- from input
file uucp.texi.
This file documents Taylor UUCP, version 1.03.
Copyright (C) 1992 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the section entitled "Copying" are included exactly as in the
original, and provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this
one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the section entitled "Copying" may be included
in a translation approved by the author instead of in the original
English.

File: uucp.info, Node: Miscellaneous (sys), Next: Default sys File Values, Prev: File Transfer Control, Up: sys File
Miscellaneous sys File Commands
-------------------------------
`sequence BOOLEAN'
If BOOLEAN is true, then conversation sequencing is automatically
used for the remote system, so that if somebody manages to spoof
as the remote system, it will be detected the next time the
remote system actually calls. This is false by default.
`command-path STRING'
Specifies the path (a list of whitespace separated directories)
to be searched to locate commands to execute. This is only used
for commands requested by `uux', not for chat programs. The
default is from `policy.h'.
`commands STRINGS'
The list of commands which the remote system is permitted to
execute locally. For example: `commands rnews rmail'. If the
value is `ALL' (case significant), all commands may be executed.
The default is `rnews rmail'.
`free-space NUMBER'
Specify the minimum amount of file system space (in bytes) to
leave free after receiving a file. If the incoming file will not
fit, it will be rejected. This will only work when talking to
another instance of this package, since older UUCP packages do
not provide the file size of incoming files. There is no
provision for reserving space, so it is still possible for
multiple `uucico' daemons to use up all available file space; a
sufficiently large value for `free-space' will avoid this problem
to some extent. The default is from `policy.h'. Not all systems
may be able to provide the amount of available space.
`pubdir STRING'
Specifies the public directory that is used when `~' is specifed
in a file transfer or a list of directories. This essentially
overrides the public directory specified in the main
configuration file for this system only. The default is the
public directory specified in the main configuration file (which
defaults to a value from `policy.h').
`debug STRING ...'
Set additional debugging for calls to or from the system. This
may be used to debug a connection with a specific system. It is
particularly useful when debugging incoming calls, since
debugging information will be generated whenever the call comes
in. See the `debug' command in the main configuration file
(*note Debugging Levels::.) for more details. The debugging
information specified here is in addition to that specified in
the main configuration file or on the command line.
`max-remote-debug STRING ...'
When the system calls in, it may request that the debugging level
be set to a certain value. This command may be used to put a
limit on the debugging level which the system may request, to
avoid filling up the disk with debugging information. Only the
debugging types named in the `max-remote-debug' command may be
turned on by the remote system. To prohibit any debugging, use
`max-remote-debug none'. The default is
`abnormal,chat,handshake'; to turn off these default entries, you
must use `max-remote-debug none' followed by other
`max-remote-debug' commands specifying the settings you want.
`timetable STRING STRING'
This is actually not specific to a system; it can appear anywhere
in the file(s). In a future release this command will probably
be moved to the main configuration file.
The `timetable' defines a timetable that may be used in
subsequently appearing time strings; *Note Time Strings::. The
first string names the timetable entry; the second is a time
string.
The following `timetable' commands are predefined. The NonPeak
timetable is included for compatibility. It originally described
the offpeak hours of Tymnet and Telenet, but both have since
changed their schedules.
timetable Evening Wk1705-0755,Sa,Su
timetable Night Wk2305-0755,Sa,Su2305-1655
timetable NonPeak Wk1805-0655,Sa,Su
If this command does not appear, then obviously no additional
timetables will be defined.

File: uucp.info, Node: Default sys File Values, Prev: Miscellaneous (sys), Up: sys File
Default sys File Values
-----------------------
The following are used as default values for all systems; they can
be considered as appearing before the start of the file.
timetable Evening Wk1705-0755,Sa,Su
timetable Night Wk2305-0755,Sa,Su2305-1655
timetable NonPeak Wk1805-0655,Sa,Su
time Never
chat "" \r\c ogin:-BREAK-ogin:-BREAK-ogin: \L word: \P
chat-timeout 10
callback n
sequence n
request y
transfer y
local-send /
remote-send ~
local-receive ~
remove-receive ~
command-path [ from `policy.h' ]
commands rnews rmail
max-remote-debug abnormal,chat,handshake

File: uucp.info, Node: port File, Next: dial File, Prev: sys File, Up: Configuration Files
The Port Configuration File
===========================
The port files may be used to name and describe ports. The first
command in each file must be `port'. All command up to the next
`port' command then describe that port. There are different types of
ports; each type supports its own set of commands. Each command
indicates which types of ports support it. There may be many ports
with the same name; if a system requests a port by name then each port
with that name will be tried until an unlocked one is found.
`port STRING'
Introduces and names a port.
`type STRING'
Define the type of port. The default is `modem'. If this command
appears, it must immediately follow the `port' command. The type
defines what commands are subsequently allowed. Currently the
types are:
`modem'
For a modem hookup.
`stdin'
For a connection through standard input and standard output,
as when `uucico' is run as a login shell.
`direct'
For a direct connection to another system.
`tcp'
For a connection using TCP.
`protocol STRING'
Specify a list of protocols to use for this port. This is just
like the corresponding command for a system (*note Protocol
Selection::.). A protocol list for a system takes precedence
over a list for a port.
`protocol-parameter CHARACTER STRINGS [ any type ]'
The same command as the `protocol-parameter' command used for
systems (*note Protocol Selection::.). This one takes precedence.
`seven-bit BOOLEAN [ any type ]'
This is only used during protocol negotiation; if the argument is
`true', it forces the selection of a protocol which works across a
seven-bit link. It does not prevent eight bit characters from
being transmitted. The default is `false'.
`reliable BOOLEAN [ any type ]'
This is only used during protocol negotiation; if the argument is
`false', it forces the selection of a protocol which works across
an unreliable communication link. The default is `true'. It
would be more common to specify this for a dialer rather than a
port.
`device STRING [ modem and direct only ]'
Names the device associated with this port. If the device is not
named, the port name is taken as the device. Device names are
system dependent, but a Unix example would be `/dev/ttyd0'.
`baud NUMBER [ modem and direct only ]'
`speed NUMBER [modem and direct only ]'
The speed this port runs at. If a system specifies a speed but
no port name, then all ports which match the speed will be tried
in order. If the speed is not specified here and is not
specified by the system, the natural speed of the port will be
used by default.
`baud-range NUMBER NUMBER [ modem only ]'
`speed-range NUMBER NUMBER [ modem only ]'
Specify a range of speeds this port can run at. The first number
is the minimum speed, the second number is the maximum speed.
These numbers will be used when matching a system which specifies
a desired speed. The simple `speed' (or `baud') command is still
used to determine the speed to run at if the system does not
specify a speed. For example, the command `speed-range 300
19200' means that the port will match any system which uses a
speed from 300 to 19200 baud (and will use the speed specified by
the system); this could be combined with `speed 2400', which
means that when this port is used with a system that does not
specify a speed, the port will be used at 2400 baud.
`carrier BOOLEAN [ modem only ]'
The argument indicates whether the port supports carrier. If it
does not, carrier will never be required on this port, regardless
of what the modem chat script indicates. The default is `true'.
`dial-device STRING [ modem only ]'
Dialing instructions should be output to the named device, rather
than to the normal port device. The default is to output to the
normal port device.
`dialer STRING [ modem only ]'
Name a dialer to use. The information is looked up in the dialer
file. There is no default. Some sort of dialer information must
be specified to call out on a modem.
`dialer STRING ... [ modem only ]'
Execute a dialer command. If a dialer is named (by using the
first form of this command, described just above), these commands
are ignored. They may be used to specify dialer information
directly in simple situations without needing to go to a separate
file. There is no default. Some sort of dialer information must
be specified to call out on a modem.
`dialer-sequence STRINGS [ modem only ]'
Name a sequence of dialers and tokens (phone numbers) to use.
The first argument names a dialer, and the second argument names
a token. The third argument names another dialer, and so on. If
there are an odd number of arguments, the phone number specified
with a `phone' command in the system file is used as the final
token. The token is what is used for `\D' or `\T' in the dialer
chat script. If the token in this string is `\D', the system
phone number will be used; if it is `\T', the system phone number
will be used after undergoing dialcodes translation. A missing
final token is taken as `\D'.
This command currently does not work if `dial-device' is
specified; to handle this correctly will require a more
systematic notion of chat scripts. Moreover, only the `complete'
and `abort' chat scripts from the first dialer specified are
used, and only the protocol parameters from the first dialer are
used.
`lockname STRING [ modem and direct only ]'
Give the name to use when locking this port. On Unix, this is
the name of the file that will be created in the lock directory.
It is used as is, so on Unix it should generally start with
`LCK..'. For example, if a single port were named both
`/dev/ttycu0' and `/dev/tty0' (perhaps with different
characteristics keyed on the minor device number), then the
command `lockname LCK..ttycu0' could be used to force the latter
to use the same lock file name as the former.
`service STRING [ tcp only ]'
Name the TCP port number to use. This may be a number. If not,
it will be looked up in `/etc/services'. If this is not
specified, the string `uucp' is looked up in `/etc/services'. If
it is not found, port number 540 (the standard UUCP-over-TCP port
number) will be used.

File: uucp.info, Node: dial File, Next: Security, Prev: port File, Up: Configuration Files
The Dialer Configuration File
=============================
The dialer configuration files define dialers. The first command in
each file must be a `dialer' command, which names the dialer.
Subsequent commands up to the next `dialer' command are associated
with the named dialer.
`dialer STRING'
Introduces and names a dialer.
`chat STRINGS'
`chat-timeout NUMBER'
`chat-fail STRING'
`chat-seven-bit BOOLEAN'
`chat-program STRINGS'
Specify a chat script to be used to dial the phone. See *Note
Chat Scripts:: for full details on chat scripts.
Taylor UUCP will sleep for one second between attempts to dial
out on a modem. If your modem requires a longer wait period, you
must start your chat script with delays (`\d' in a send string).
The chat script will be read from and sent to the port specified
by the `dial-device' command for the port, if there is one.
The following escape addition escape sequences may appear in send
strings:
`\D'
send phone number without dialcode translation
`\T'
send phone number with dialcode translation
`\M'
do not require carrier
`\m'
require carrier (fail if not present)
See the description of the dialcodes file (*note Configuration
File Names::.) for a description of dialcode translation. If the
port does not support carrier (as set by the `carrier' command in
the port file) `\M' and `\m' are ignored. If both the port and
the dialer support carrier (as set by the `carrier' command in
the port file and the `carrier' command in the dialer file), then
every chat script implicitly begins with `\M' and ends with `\m'.
There is no default chat script for dialers.
The following additional escape sequences may be used in
`chat-program':
`\D'
phone number without dialcode translation
`\T'
phone number with dialcode translation
If the program changes the port in any way (e.g., sets parity) the
changes will be preserved during protocol negotiation, but once
the protocol is selected it will change the port settings.
`dialtone STRING'
A string to output when dialing the phone number which causes the
modem to wait for a secondary dial tone. This is used to
translate the `=' character in a phone number. The default is a
comma.
`pause STRING'
A string to output when dialing the phone number which causes the
modem to wait for 1 second. This is used to translate the `-'
character in a phone number. The default is a comma.
`carrier BOOLEAN'
If the argument is `true', the dialer supports the modem carrier
signal. After the phone number is dialed, `uucico' will require
that carrier be on. One some systems, it will be able to wait
for it. If the argument is `false', carrier will not be
required. The default is `true'.
`carrier-wait NUMBER'
If the port is supposed to wait for carrier, this may be used to
indicate how many seconds to wait. The default is 60 seconds.
Only some systems support waiting for carrier.
`dtr-toggle BOOLEAN BOOLEAN'
If the first argument is `true', then DTR is toggled before using
the modem. This is only supported on some systems and some
ports. The second BOOLEAN need not be present; if it is, and it
is `true', the program will sleep for 1 second after toggling DTR.
The default is not to toggle DTR.
`complete-chat STRINGS'
`complete-chat-timeout NUMBER'
`complete-chat-fail STRING'
`complete-chat-seven-bit BOOLEAN'
`complete-chat-program STRINGS'
These commands define a chat script (*note Chat Scripts::.) which
is run when a call is finished normally. This allows the modem
to be reset. There is no default. No additional escape
sequences may be used.
`complete STRING'
This is a simple use of `complete-chat'. It is equivalent to
`complete-chat "" STRING'; this has the effect of sending STRING
to the modem when a call finishes normally.
`abort-chat STRINGS'
`abort-chat-timeout NUMBER'
`abort-chat-fail STRING'
`abort-chat-seven-bit BOOLEAN'
`abort-chat-program STRINGS'
These commands define a chat script (*note Chat Scripts::.) to be
run when a call is aborted. They may be used to interrupt and
reset the modem. There is no default. No additional escape
sequences may be used.
`abort STRING'
This is a simple use of `abort-chat'. It is equivalent to
`abort-chat "" STRING'; this has the effect of sending STRING to
the modem when a call is aborted.
`protocol-parameter CHARACTER STRINGS'
Set protocol parameters, just like the `protocol-parameter'
command in the system configuration file or the port
configuration file; see *Note Protocol Selection::. These
parameters take precedence, then those for the port, then those
for the system.
`seven-bit BOOLEAN'
This is only used during protocol negotiation; if it is `true', it
forces selection of a protocol which works across a seven-bit
link. It does not prevent eight bit characters from being
transmitted. The default is `false'. It would be more common to
specify this for a port than for a dialer.
`reliable BOOLEAN'
This is only used during protocol negotiation; if it is `false',
it forces selection of a protocol which works across an unreliable
communication link. The default is `true'.

File: uucp.info, Node: Security, Prev: dial File, Up: Configuration Files
Security
========
This discussion of UUCP security applies only to Unix. It is a bit
cursory; suggestions for improvement are solicited.
UUCP is traditionally not very secure. Taylor UUCP addresses some
security issues, but is still far from being a secure system.
If security is very important to you, then you should not permit any
external access to your computer, including UUCP. Any opening to the
outside world is a potential security risk.
By default Taylor UUCP provides few mechanisms to secure local
users of the system from each other. You can allow increased security
by putting the owner of the UUCP programs (normally `uucp') into a
separate group; the use of this is explained in the following
paragraphs, which refer to this separate group as `uucp-group'.
When the `uucp' program is invoked to copy a file to a remote
system, it will by default copy the file into the UUCP spool directory.
When the `uux' program is used, the `-C' switch must be used to copy
the file into the UUCP spool directory. In any case, once the file
has been copied into the spool directory, other local users will not
be able to access it. In version 1.03 there is a security hole in
that for the file to be copied it must be readable by `uucp'.
Changing the group of the file to `uucp-group' and making it group
readable will permit UUCP to read it without granting access to other
users.
When a file is requested from a remote system, UUCP will only
permit it to be placed in a directory which is writable by the
requesting user. The directory must also be writable by UUCP. A
local user can create a directory with a group of `uucp-group' and set
the mode to permit group write access. This will allow the file be
requested without permitting it to be viewed by any other user.
There is no provision for security for `uucp' requests (as opposed
to `uux' requests) made by a user on a remote system. A file sent
over by a remote request may only be placed in a directory which is
world writable, and the file will be world readable and writable. This
will permit any local user to destroy or replace the contents of the
file. A file requested by a remote system must be world readable, and
the directory it is in must be world readable. Any local user will be
able to examine, although not necessarily modify, the file before it is
sent.
There are some security holes and race conditions that apply to the
above discussion which I will not elaborate on. They are not hidden
from anybody who reads the source code, but they are somewhat technical
and difficult (but scarcely impossible) to exploit. Suffice it to say
that even under the best of conditions UUCP is not completely secure.
For many sites, security from remote sites is a more important
consideration. Fortunately, Taylor UUCP does provide some support in
this area.
The greatest security is provided by always dialing out to the other
site. This prevents anybody from pretending to be the other site. Of
course, only one side of the connection can do this.
If remote dialins must be permitted, then it is best if the dialin
line is used only for UUCP. If this is the case, then you should
create a call-in password file (*note Configuration File Names::.) and
let `uucico' do its own login prompting. For example, to let remote
sites log in on a port named `entry' in the port file (*note port
file::.) you might invoke `uucico -p entry'. This would cause
`uucico' to enter an endless loop of login prompts and daemon
executions. The advantage of this approach is that even if remote
users break into the system by guessing or learning the password, they
will only be able to do whatever `uucico' permits them to do. They
will not be able to start a shell on your system.
If remote users can dial in and log on to your system, then you
have a security hazard more serious than that posed by UUCP. But
then, you probably knew that already.
Once your system has connected with the remote UUCP, there is a fair
amount of control you can exercise. You can use the `remote-send' and
`remote-receive' commands to control the directories the remote UUCP
can access. You can use the `request' command to prevent the remote
UUCP from making any requests of your system at all; however, if you
do this it will not even be able to send you mail or news. If you do
permit remote requests, you should be careful to restrict what
commands may be executed at the remote system's request. The default
is `rmail' and `rnews', which will suffice for most systems.
If different remote systems call in and they must be granted
different privileges (perhaps some systems are within the same
organization and some are not) then the `called-login' command should
be used for each system to require that they different login names.
Otherwise it would be simple for a remote system to use the `myname'
command and pretend to be a different system. The `sequence' command
can be used to detect when one system pretended to be another, but
since the sequence numbers must be reset manually after a failed
handshake this can sometimes be more trouble than it's worth.

File: uucp.info, Node: Protocols, Next: Hacking, Prev: Configuration Files, Up: Top
UUCP protocol internals
***********************
This chapter describes how the various UUCP protocols work, and
discusses some other internal UUCP issues.
This chapter is quite technical. You do not need to understand it,
or even read it, in order to use Taylor UUCP. It is intended for
people who are interested in how UUCP code works.
Most of the discussion covers the protocols used by all UUCP
packages, not just Taylor UUCP. Any information specific to Taylor
UUCP is indicated as such. There are some pointers to the actual
functions in the Taylor UUCP source code, for those who are extremely
interested in actual UUCP implementation.
* Menu:
* Grades:: UUCP grades
* Lock Files:: UUCP lock file format
* UUCP Protocol:: The common UUCP protocol
* g Protocol:: The UUCP `g' protocol
* f Protocol:: The UUCP `f' protocol
* t Protocol:: The UUCP `t' protocol
* e Protocol:: The UUCP `e' protocol
* x Protocol:: The UUCP `x' protocol
* d Protocol:: The UUCP `d' protocol
* Capital G Protocol:: The UUCP `G' protocol
* Documentation References:: Documentation references

File: uucp.info, Node: Grades, Next: Lock Files, Prev: Protocols, Up: Protocols
UUCP Grades
===========
Modern UUCP packages support grades for each command. The grades
generally range from `A' (the highest) to `Z' followed by `a' to `z'.
Taylor UUCP also supports `0' to `9' before `A'. Some UUCP packages
may permit any ASCII character as a grade.
On Unix, these grades are encoded in the name of the command file.
A command file name generally has the form
C.nnnngssss
where NNNN is the remote system name for which the command is queued,
G is a single character grade, and SSSS is a four character sequence
number. For example, a command file created for the system `airs' at
grade `Z' might be named
C.airsZ2551
The remote system name will be truncated to seven characters, to
ensure that the command file name will fit in the 14 character file
name limit of the traditional Unix file system. UUCP packages which
have no other means of distinguishing which command files are intended
for which systems thus require all *systems they connect to* to have
names that are unique in the first seven characters. Some UUCP
packages use a variant of this format which truncates the system name
to six characters. BNU uses a different spool directory format, which
allows up to fourteen characters to be used for each system name. The
Taylor UUCP spool directory format is configurable. The new Taylor
spool directory format permits system names to be as long as file
names; the maximum length of a file name depends on the particular
Unix file system being used.
The sequence number in the command file name may be a decimal
integer, or it may be a hexadecimal integer, or it may contain any
alphanumeric character. Different UUCP packages are different.
Taylor UUCP creates command files in the function
`zsysdep_spool_commands'. The file name is constructed by the
function `zsfile_name', which knows about all the different types of
spool directories supported by Taylor UUCP. The Taylor UUCP sequence
number can contain any alphanumeric character; the next sequence number
is determined by the function `fscmd_seq'.
I do not know how command grades are handled in non-Unix UUCP
packages.
Modern UUCP packages allow you to restrict file transfer by grade
depending on the time of day. Typically this is done with a line in
the `Systems' (or `L.sys') file like this:
airs Any/Z,Any2305-0855 ...
This allows only grades `Z' and above to be transferred at any
time. Lower grades may only be transferred at night. I believe that
this grade restriction applies to local commands as well as to remote
commands, but I am not sure. It may only apply if the UUCP package
places the call, not if it is called by the remote system. Taylor UUCP
can use the `timegrade' and `call-timegrade' commands (*note When to
Call::.) to achieve the same effect (and supports the above format
when reading `Systems' or `L.sys').
This sort of grade restriction is most useful if you know what
grades are being used at the remote site. The default grades used
depend on the UUCP package. Generally `uucp' and `uux' have different
defaults. A particular grade can be specified with the `-g' option to
`uucp' or `uux'. For example, to request execution of rnews on airs
with grade `d', you might use something like
uux -gd - airs!rnews <article
`uunet' queues up mail at grade `Z' and news at grade `d'. The
example above would allow mail to be received at any time, but would
only permit news to be transferred at night.

File: uucp.info, Node: Lock Files, Next: UUCP Protocol, Prev: Grades, Up: Protocols
UUCP Lock File Format
=====================
This discussion applies only to Unix. I have no idea how UUCP locks
ports on other systems.
UUCP creates files to lock serial ports and systems. On most (if
not all) systems, these same lock files are also used by cu to
coordinate access to serial ports. On some systems getty also uses
these lock files.
The lock file normally contains the process ID of the locking
process. This makes it easy to determine whether a lock is still
valid. The algorithm is to create a temporary file and then link it
to the name that must be locked. If the link fails because a file
with that name already exists, the existing file is read to get the
process ID. If the process still exists, the lock attempt fails.
Otherwise the lock file is deleted and the locking algorithm is
retried.
Older UUCP packages put the lock files in the main UUCP spool
directory, /usr/spool/uucp. BNU UUCP generally puts the lock files in
a directory of their own, usually /usr/spool/locks or /etc/locks.
The original UUCP lock file format encoded the process ID as a four
byte binary number. The order of the bytes was host-dependent. BNU
UUCP stores the process ID as a ten byte ASCII decimal number, with a
trailing newline. For example, if process 1570 holds a lock file, it
would contain the eleven characters space, space, space, space, space,
space, one, five, seven, zero, newline. Some versions of UUCP add a
second line indicating which program created the lock (uucp, cu, or
getty). I have also seen a third type of UUCP lock file which did not
contain the process ID at all.
The name of the lock file is generally "LCK.." followed by the base
name of the device. For example, to lock /dev/ttyd0 the file
LCK..ttyd0 would be created. There are various exceptions. On SCO
Unix, the lock file name is always forced to lower case even if the
device name has upper case letters. System V Release 4 UUCP forms the
lock file name using the major and minor device numbers rather than
the device name (this is pretty sensible if you think about it).
Taylor UUCP can be configured to use various different types of
locking. The actual locking code is in the function `fsdo_lock'.

File: uucp.info, Node: UUCP Protocol, Next: g Protocol, Prev: Lock Files, Up: Protocols
The Common UUCP Protocol
========================
The UUCP protocol is a conversation between two UUCP packages. A
UUCP conversation consists of three parts: an initial handshake, a
series of file transfer requests, and a final handshake.
Before the initial handshake, the caller will usually have logged
in the called machine and somehow started the UUCP package there. On
Unix this is normally done by setting the shell of the login name used
to `uucico'.
* Menu:
* Initial Handshake:: Initial handshake
* File Requests:: File requests
* Final Handshake:: Final handshake

File: uucp.info, Node: Initial Handshake, Next: File Requests, Prev: UUCP Protocol, Up: UUCP Protocol
Initial Handshake
-----------------
All messages in the initial handshake begin with a `^P' (a byte
with the octal value \020) and end with a null byte (\000).
Taylor UUCP implements the initial handshake for the calling
machine in `fdo_call', and for the called machine in `faccept_call'.
The initial handshake goes as follows. It is begun by the called
machine.
called: `\020Shere=HOSTNAME\000'
The HOSTNAME is the UUCP name of the called machine. Older UUCP
packages do not output it, and simply send `\020Shere\000'.
caller: `\020SHOSTNAME OPTIONS\000'
The HOSTNAME is the UUCP name of the calling machine. The
following OPTIONS may appear (or there may be none):
`-QSEQ'
Report sequence number for this conversation. The sequence
number is stored at both sites, and incremented after each
call. If there is a sequence number mismatch, something has
gone wrong (somebody may have broken security by pretending
to be one of the machines) and the call is denied. If the
sequence number changes on one of the machines, perhaps
because of an attempted breakin or because a disk backup was
restored, the sequence numbers on the two machines must be
reconciled manually.
`-xLEVEL'
Requests the called system to set its debugging level to the
specified value. This is not supported by all systems.
Taylor UUCP currently never generates this switch. When it
sees it, it restricts the value according to
`max-remote-debug' (*note Miscellaneous (sys)::.).
`-pGRADE'
`-vgrade=GRADE'
Requests the called system to only transfer files of the
specified grade or higher. This is not supported by all
systems. Some systems support `-p', some support
`-vgrade='. Taylor UUCP supports both.
`-R'
Indicates that the calling UUCP understands how to restart
failed file transmissions. Supported only by System V
Release 4 UUCP.
`-ULIMIT'
Reports the `ulimit' value of the calling UUCP. The limit is
specified as a base 16 number in C notation (e.g.,
`-U0x1000000'). This number is the number of 512 byte
blocks in the largest file which the calling UUCP can
create. The called UUCP may not transfer a file larger than
this. Supported by System V Release 4 UUCP. Taylor UUCP
understands this option, but never generates it.
`-N'
Indicates that the calling UUCP understands the Taylor UUCP
size limiting extensions. Supported only by Taylor UUCP.
called: `\020ROK\000'
There are actually several possible responses.
`ROK'
The calling UUCP is acceptable, and the handshake proceeds
to the protocol negotiation. Some options may also appear;
see below.
`ROKN'
The calling UUCP is acceptable, it specified `-N', and the
called UUCP also understands the Taylor UUCP size limiting
extensions. Supported only by Taylor UUCP.
`RLCK'
The called UUCP already has a lock for the calling UUCP,
which normally indicates the two machines are already
communicating.
`RCB'
The called UUCP will call back. This may be used to avoid
impostors. Note that only one machine out of each pair
should call back, or no conversation will ever begin.
`RBADSEQ'
The call sequence number is wrong (see the `-Q' discussion
above).
`RLOGIN'
The calling UUCP is using the wrong login name.
`RYou are unknown to me'
The calling UUCP is not known to the called UUCP, and the
called UUCP does not permit connections from unknown systems.
If the response is `ROK', the following options are supported by
System V Release 4 UUCP.
`-R'
The called UUCP knows how to restart failed file
transmissions.
`-ULIMIT'
Reports the ulimit value of the called UUCP. The limit is
specified as a base 16 number in C notation. This number is
the number of 512 byte blocks in the largest file which the
called UUCP can create. The calling UUCP may not send a
file larger than this.
`-xLEVEL'
I'm told that this is sometimes sent by SVR4 UUCP, but I'm
not sure exactly what it means. It may request the calling
UUCP to set its debugging level to the specified value.
If the response is not `ROK' (or `ROKN') both sides hang up the
phone, abandoning the call.
called: `\020PPROTOCOLS\000'
The `P' is a literal character. Note that the called UUCP outputs
two strings in a row. The PROTOCOLS string is a list of UUCP
protocols supported by the caller. Each UUCP protocol has a
single character name. For example, the called UUCP might send
`\020Pgf\000'.
caller: `\020UPROTOCOL\000'
The `U' is a literal character. The calling UUCP selects which
PROTOCOL to use out of the protocols offered by the called UUCP.
If there are no mutually supported protocols, the calling UUCP
sends `\020UN\000' and both sides hang up the phone. Otherwise
the calling UUCP sends something like `\020Ug\000'.
Most UUCP packages will consider each locally supported protocol in
turn and select the first one supported by the called UUCP. With some
versions of BNU UUCP, this can be modified by giving a list of
protocols after the device name in the Devices file or the `Systems'
file. Taylor UUCP provides the `protocol' command which may be used
either for a system (*note Protocol Selection::.) or a port (*note
port file::.).
After the protocol has been selected and the initial handshake has
been completed, both sides turn on the selected protocol. For some
protocols (notably `g') a further handshake is done at this point.
Each protocol supports a method for sending a command to the remote
system. This method is used to transmit a series of commands between
the two UUCP packages. At all times, one package is the master and the
other is the slave. Initially, the calling UUCP is the master.
If a protocol error occurs during the exchange of commands, both
sides move immediately to the final handshake.

File: uucp.info, Node: File Requests, Next: Final Handshake, Prev: Initial Handshake, Up: UUCP Protocol
File Requests
-------------
The master will send one of four commands: `S', `R', `X' or `H'.
Any file name referred to below is either an absolute pathname
beginning with `/', a public directory pathname beginning with `~/', a
pathname relative to a user's home directory beginning with `~USER/',
or a spool directory file name. File names in the spool directory are
not pathnames, but instead are converted to pathnames within the spool
directory by UUCP. They always begin with `C.' (for a command file
created by `uucp' or `uux'), `D.' (for a data file created by `uucp',
`uux' or by an execution, or received from another system for an
execution), or `X.' (for an execution file created by `uux' or
received from another system).
Taylor UUCP chooses which request to send next in the function
`fuucp'. This is also where Taylor UUCP processes incoming commands
from the remote system.
* Menu:
* S Request:: S request
* R Request:: R request
* X Request:: X request
* H Request:: H request

File: uucp.info, Node: S Request, Next: R Request, Prev: File Requests, Up: File Requests
S Request
.........
master: `S FROM TO USER -OPTIONS TEMP MODE NOTIFY SIZE'
The `S' and the `-' are literal characters. This is a request by
the master to send a file to the slave. Taylor UUCP handles the `S'
request in the function `fsend_file'.
FROM
The name of the file to send. If the `C' option does not appear
in OPTIONS, the master will actually open and send this file.
Otherwise the file has been copied to the spool directory, where
it is named TEMP. The slave ignores this field unless TO is a
directory, in which case the basename of FROM will be used as the
file name. If FROM is a spool directory filename, it must be a
data file created for or by an execution, and must begin with
`D.'.
TO
The name to give the file on the slave. If this field names a
directory the file is placed within that directory with the
basename of FROM. A name ending in `/' is taken to be a
directory even if one does not already exist with that name. If
TO begins with `X.', an execution file will be created on the
slave. Otherwise, if TO begins with `D.' it names a data file to
be used by some execution file. Otherwise, TO should not be in
the spool directory.
USER
The name of the user who requested the transfer.
OPTIONS
A list of options to control the transfer. The following options
are defined (all options are single characters):
`C'
The file has been copied to the spool directory (the master
should use TEMP rather than FROM).
`c'
The file has not been copied to the spool directory (this is
the default).
`d'
The slave should create directories as necessary (this is
the default).
`f'
The slave should not create directories if necessary, but
should fail the transfer instead.
`m'
The master should send mail to USER when the transfer is
complete.
`n'
The slave should send mail to NOTIFY when the transfer is
complete.
TEMP
If the `C' option appears in OPTIONS, this names the file to be
sent. Otherwise if FROM is in the spool directory, TEMP is the
same as FROM. Otherwise TEMP is a dummy string, normally `D.0'.
After the transfer has been succesfully completed, the master
will delete the file TEMP.
MODE
This is an octal number giving the mode of the file on the
master. If the file is not in the spool directory, the slave
will always create it with mode 0666, except that if (MODE &
0111) is not zero (the file is executable), the slave will create
the file with mode 0777. If the file is in the spool directory,
some UUCP packages will use the algorithm above and some will
always create the file with mode 0600 (Taylor UUCP does the
latter).
NOTIFY
This field is only used if the `n' option appears in OPTIONS.
Otherwise, it may not appear, or it may be the string `dummy', or
it may simply be a pair of double quotes. If the `n' option is
specified, then when the transfer is successfully completed the
slave will send mail to NOTIFY, which must be a legal mailing
address on the slave.
SIZE
This field is only present when doing size negotiation, either
with Taylor UUCP or SVR4 UUCP. It is the size of the file in
bytes. SVR4 UUCP sends the size in base 16 as 0x... while Taylor
UUCP sends the size as a decimal integer (a later version of
Taylor UUCP will probably change to the SVR4 behaviour).
The slave then responds with an S command response. Taylor UUCP
generates these responses in `freceive_file' and `ftransfer_fail'.
`SY START'
The slave is willing to accept the file, and file transfer
begins. The START field will only be present when using SVR4
file restart. It specifies the byte offset into the file at
which to start sending. If this is a new file, START will be 0x0.
`SN2'
The slave denies permission to transfer the file. This can mean
that the destination directory may not be accessed, or that no
requests are permitted. It implies that the file transfer will
never succeed.
`SN4'
The slave is unable to create the necessary temporary file. This
implies that the file transfer might succeed later.
`SN6'
This is only used by Taylor UUCP size negotiation. It means that
the slave considers the file too large to transfer at the moment,
but it may be possible to transfer it at some other time.
`SN7'
This is only used by Taylor UUCP size negotiation. It means that
the slave considers the file too large to ever transfer.
If the slave responds with `SY', a file transfer begins. When the
file transfer is complete, the slave sends a `C' command response.
Taylor UUCP generates this confirmation in `fprecfile_confirm' and
checks it in `fpsendfile_confirm'.
`CY'
The file transfer was successful.
`CN5'
The temporary file could not be moved into the final location.
This implies that the file transfer will never succeed.
After the `C' command response has been received (in the `SY' case)
or immediately (in an `SN' case) the master will send another command.

File: uucp.info, Node: R Request, Next: X Request, Prev: S Request, Up: File Requests
R Request
.........
master: `R FROM TO USER -OPTIONS SIZE'
The `R' and the `-' are literal characters. This is a request by
the master to receive a file from the slave. I do not know how SVR4
UUCP implements file transfer restart in this case. Taylor UUCP
implements the `R' request in `freceive_file'.
FROM
This is the name of the file on the slave which the master wishes
to receive. It must not be in the spool directory, and it may
not contain any wildcards.
TO
This is the name of the file to create on the master. I do not
believe that it can be a directory. It may only be in the spool
directory if this file is being requested to support an execution
either on the master or on some system other than the slave.
USER
The name of the user who requested the transfer.
OPTIONS
A list of options to control the transfer. The following options
are defined (all options are single characters):
`d'
The master should create directories as necessary (this is
the default).
`f'
The master should not create directories if necessary, but
should fail the transfer instead.
`m'
The master should send mail to USER when the transfer is
complete.
SIZE
This only appears if Taylor UUCP size negotiation is being used.
It specifies the largest file which the master is prepared to
accept (when using SVR4 UUCP, this was specified in the `-U'
option during the initial handshake).
The slave then responds with an `R' command response. Taylor UUCP
generates these responses in `fsend_file' and `ftransfer_fail'.
`RY MODE'
The slave is willing to send the file, and file transfer begins.
MODE is the octal mode of the file on the slave. The master uses
this to set the mode of the file on the master's system just as
the slave does the MODE argument in the send command (*note S
Request::.).
`RN2'
The slave is not willing to send the file, either because it is
not permitted or because the file does not exist. This implies
that the file request will never succeed.
`RN6'
This is only used by Taylor UUCP size negotiation. It means that
the file is too large to send, either because of the size limit
specifies by the master or because the slave considers it too
large. The file transfer might succeed later, or it might not
(this will be cleared up in a later release of Taylor UUCP).
If the slave responds with `RY', a file transfer begins. When the
file transfer is complete, the master sends a `C' command. The slave
pretty much ignores this, although it may log it. Taylor UUCP sends
this confirmation in `fprecfile_confirm' and checks it in
`fpsendfile_confirm'.
`CY'
The file transfer was successful.
`CN5'
The temporary file could not be moved into the final location.
After the `C' command response has been sent (in the `RY' case) or
immediately (in an `RN' case) the master will send another command.

File: uucp.info, Node: X Request, Next: H Request, Prev: R Request, Up: File Requests
X Request
.........
master: `X FROM TO USER -OPTIONS'
The `X' and the `-' are literal characters. This is a request by
the master to, in essence, execute `uucp' on the slave. The slave
should execute `uucp FROM TO'. Taylor UUCP generates the `X' request
in `fxcmd' and handles it in `fdo_xcmd'.
FROM
This is the name of the file or files on the slave which the
master wishes to transfer. Any wildcards are expanded on the
slave. If the master is requesting that the files be transferred
to itself, the request would normally contain wildcard
characters, since otherwise an `R' command would suffice. The
master can also use this command to request that the slave
transfer files to a third system.
TO
This is the name of the file or directory to which the files
should be transferred. This will normally use a UUCP name. For
example, if the master wishes to receive the files itself, it
would use `MASTER!PATH'.
USER
The name of the user who requested the transfer.
OPTIONS
A list of options to control the transfer. It is not clear
which, if any, options are supported by most UUCP packages.
Taylor UUCP ignores the options field.
The slave then responds with an X command response. Taylor UUCP
sends this response in either `fxcmd_confirm' or `ftransfer_fail'.
`XY'
The request was accepted, and the appropriate file transfer
commands have been queued up for later processing.
`XN'
The request was denied. No particular reason is given.
In either case, the master will then send another command.

File: uucp.info, Node: H Request, Prev: X Request, Up: File Requests
H Request
.........
master: `H'
This is used by the master to hang up the connection. The slave
will respond with an `H' command response. Taylor UUCP processes this
request in `fhangup_request', `fhangup_reply', and `fgetcmd'.
`HY'
The slave agrees to hang up the connection. In this case the
master sends another `HY' command. In some UUCP packages,
including Taylor UUCP, the slave will then send a third `HY'
command. At this point the protocol is shut down, and the final
handshake is begun.
`HN'
The slave does not agree to hang up. In this case the master and
the slave exchange roles. The next command will be sent by the
former slave, which is the new master. The roles may be reversed
several times during a single connection.

Reference in New Issue View Git Blame Copy Permalink