NetBSD/sys/arch/x68k/conf/ALL

296 lines
9.9 KiB
Plaintext

# $NetBSD: ALL,v 1.26 1999/01/18 07:39:51 itohy Exp $
#
# ALL -- everything that's currently supported
#
include "arch/x68k/conf/std.x68k"
maxusers 32
## System kernel configuration. See options(4) for more detail.
## Options for variants of the m68k MPU
## you must have at least the correct one; REQUIRED
options M68030
options M68040
options M68060
#### System options specific to the x68k port
options UVM # new virtual memory system
options MACHINE_NONCONTIG # support for noncontiguous memory
options FPU_EMULATE # software fpu emulation for MC68030
options FPSP # floating point emulation for MC68040
options M060SP # int/fp emulation for MC68060
options JUPITER # support for "Jupiter-X" accelerator
options MAPPEDCOPY # use page mapping for large copyin/copyout
options EIOMAPSIZE=0 # do not map PCI address space
#### System options that are the same for all ports
## Root device configuration: change the ?'s if you are going to use a
## nonstandard root partition (other than where the kernel is booted from)
## and/or nonstandard root type (not ffs or nfs). Normally this can be
## automagically determined at boot time.
config netbsd root on ? type ?
## RTC is offset from GMT; -540 means JST-9
options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
## System call tracing (see ktrace(1)).
options KTRACE
## Collect statistics on kernel malloc's and free's. This does have a
## significant performance hit on slower machines, so it is intended for
## diagnostic use only.
#options KMEMSTATS
## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
options SHMMAXPGS=1024 # 1024 pages is the default
## Loadable kernel module support
options LKM
## NFS boot options; not supported currently: needs nfsboot program
#options NFS_BOOT_BOOTPARAM
#options NFS_BOOT_BOOTP
#options NFS_BOOT_DHCP
#### Debugging options
## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
## serial console break or keyboard reset, where the PROM would normally
## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
options DDB # kernel dynamic debugger
options DDB_HISTORY_SIZE=100 # enable history editing in DDB
options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options PANICBUTTON # interrupt switch invokes DDB
## You may also use gdb, on another computer connected to this machine over
## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
## a dev_t encoded device number of the serial port to use.
## KGDB is not supported for now.
#options KGDB # support for kernel gdb
#options KGDBDEV=0xc00 # kgdb device number
#options KGDBRATE=9600 # baud rate
## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
## such that gdb(1) can be used on a kernel coredump.
#makeoptions DEBUG="-g"
## Adds code to the kernel that does internal consistency checks, and will
## cause the kernel to panic if corruption of internal data structures
## is detected.
options DIAGNOSTIC # extra kernel sanity checking
## Enable (possibly expensive) debugging code that may also display messages
## on the system console
options DEBUG
## Make SCSI error messages more verbose when explaining their meanings.
options SCSIVERBOSE
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
## This allows writing to /dev/mem, loading kernel modules while multi-user,
## and other insecurities good only for development work. Do not use this
## option on a production machine.
#options INSECURE
## Allow non-root users to grab /dev/console with programs such as xconsole.
## `xconsole' therefore does not need setuid root with this option enabled.
#options UCONSOLE
## `FDSCRIPTS' allows non-readable but executable scripts by providing a
## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
## opaque file mechanism. Perl calls this "secure setuid scripts."
#options FDSCRIPTS
#options SETUIDSCRIPTS
## Options for compatibility with previous releases foreign system binaries.
options COMPAT_43 # 4.3BSD system interfaces
options COMPAT_09 # NetBSD 0.9 binary compatibility
options COMPAT_10 # NetBSD 1.0 binary compatibility
options COMPAT_11 # NetBSD 1.1 binary compatibility
options COMPAT_12 # NetBSD 1.2 binary compatibility
options COMPAT_13 # NetBSD 1.3 binary compatibility
options COMPAT_M68K4K # NetBSD/m68k4k binaries
#options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken
options COMPAT_LINUX # Linux/m68k binary compatibility
options EXEC_ELF32 # 32-bit ELF executables (Linux)
## File systems.
file-system FFS # Berkeley Fast Filesystem
file-system NFS # Sun NFS-compatible filesystem client
file-system KERNFS # kernel data-structure filesystem
file-system NULLFS # NULL layered filesystem
file-system MFS # memory-based filesystem
file-system FDESC # user file descriptor filesystem
file-system UMAPFS # uid/gid remapping filesystem
file-system LFS # Log-based filesystem (still experimental)
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system UNION # union file system
file-system MSDOSFS # MS-DOS FAT filesystem(s).
file-system ADOSFS # AmigaDOS filesystem
## File system options.
options NFSSERVER # Sun NFS-compatible filesystem server
options QUOTA # FFS quotas
options FFS_EI # FFS Endian Independent support
## Network protocol support. In most environments, INET is required.
options INET # IP (Internet Protocol) v4
options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
options GATEWAY # packet forwarding ("router switch")
options MROUTING # packet forwarding of multicast packets
options DIRECTED_BROADCAST # allow broadcasts through routers
options NS # Xerox NS networking
#options NSIP # Xerox NS tunneling over IP
#options ISO,TPIP # OSI networking
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25 packet switched protocol
options NETATALK # AppleTalk (over Ethernet) protocol
options NTP # Network Time Protocol in-kernel support
#options PPS_SYNC # Add serial line synchronization for NTP
#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
options PPP_BSDCOMP # Add BSD compression to ppp device
options PPP_DEFLATE # Add deflate (libz) compression to ppp device
options PPP_FILTER # Add active filters for ppp (via bpf)
#### Device configurations
## Fundamental devices
mainbus0 at root # MANDATORY
## Display devices and console
grfbus0 at mainbus0 # bitmapped displays
grf0 at grfbus0 # multiplane graphics
grf1 at grfbus0 # flexible graphics
ite0 at grf0 # internal terminal emulator
pseudo-device kbd # standard keyboard
pseudo-device pow 2 # software power switch
## floppy disks
fdc0 at mainbus0 # floppy controller
fd* at fdc0 unit ? # builtin floppy drives
## SCSI devices
spc0 at mainbus0 # builtin scsi
spc1 at mainbus0 # external scsi
scsibus* at spc?
mha0 at mainbus0 # MK-HA1 mach-2 SCSI
scsibus* at mha0
sd* at scsibus? target ? lun ? # SCSI disks
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
st* at scsibus? target ? lun ? # SCSI tapes
ss* at scsibus? target ? lun ? # SCSI scanners
ch* at scsibus? target ? lun ? # SCSI changer devices
uk* at scsibus? target ? lun ? # SCSI unknown devices
## Serial ports
zsc0 at mainbus0
zstty0 at zsc0 channel 0 # built-in RS-232C
ms0 at zsc0 channel 1 # standard mouse
zsc1 at mainbus0
zstty2 at zsc1 channel 0
zstty3 at zsc1 channel 1
zsc2 at mainbus0
zstty4 at zsc2 channel 0
zstty5 at zsc2 channel 1
xcom0 at mainbus0 # NS16550 fast serial
xcom1 at mainbus0
pseudo-device sram # battery-backuped static RAM
pseudo-device bell # OPM bell
## Audio device; broken
#okiadpcm0 at mainbus0
#audio* at okiadpcm*
## Network interfaces
ed0 at mainbus0 # Neptune-X
#se0 at scsibus? target ? lun ? # Ether+; not supported
#### Pseudo devices
## A disk-like interface to files. Can be used to create floppy, CD,
## miniroot images, etc.
pseudo-device vnd 4
## Concatenated and striped disks; with this, you can create a software-based
## disk array similar to a "RAID 0" setup. See ccd(4).
pseudo-device ccd 4
## RAIDframe disk driver: software RAID driver. See raid(4).
pseudo-device raid 4
## Memory disk device, used on boot floppies with compressed
## kernel-plus-root-disk images.
pseudo-device md 1
## Loopback network interface; required
pseudo-device loop
## SLIP and CSLIP interfaces, for IP over a serial line.
pseudo-device sl 2
## PPP, the successor to SLIP. See pppd(8).
pseudo-device ppp 2
## Network "tunnel" device, allowing protocol stacks to run in the userland.
## This is used by the third-party user-mode "ppp" program, and others.
pseudo-device tun 4
## Generic L3 over IP tunnel
#pseudo-device gre 2 # generic L3 over IP tunnel
## Berkeley Packet Filter, required to run RARPD. A generic C-language
## interface that allows selective examining of incoming packets.
pseudo-device bpfilter 8
## IP Filter, used in firewall and NAT applications. See ipnat(8) for
## one example of the use of the IP Filter.
pseudo-device ipfilter
#### Other device configuration
## Pseudo ttys, required for network logins and programs like screen.
## 32 is a good number for average systems; you may have as many as you
## like, though 256 is more or less the upper limit. Increasing this
## number still requires you to run /dev/MAKEDEV to create the files
## for the ptys.
pseudo-device pty 64 # pseudo-ttys (for network, etc.)
## Random device, used to implement /dev/random (a source of random noise),
## and generate randomness for some kernel formulae.
## THIS DEVICE IS EXPERIMENTAL; use at your own risk.
pseudo-device rnd