395 lines
14 KiB
Plaintext
395 lines
14 KiB
Plaintext
# $NetBSD: LAMB,v 1.39 2004/07/29 22:29:37 jmmv Exp $
|
|
#
|
|
# LAMB - a complete kernel for wildlab LAMB, http://www.wildlab.com/
|
|
#
|
|
|
|
include "arch/i386/conf/std.i386"
|
|
|
|
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-Revision: 1.503"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# CPU support. At least one is REQUIRED.
|
|
options I386_CPU
|
|
options I486_CPU
|
|
options I586_CPU
|
|
options I686_CPU
|
|
|
|
# CPU-related options.
|
|
options MATH_EMULATE # floating point emulation
|
|
options VM86 # virtual 8086 emulation
|
|
options USER_LDT # user-settable LDT; used by WINE
|
|
|
|
options MTRR # memory-type range register syscall support
|
|
#options PERFCTRS # performance-monitoring counters support
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
# I/O address. see console(4) for details.
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
# you don't want the option below ON iff you are using the
|
|
# serial console option of the new boot strap code.
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
# The following options override the memory sizes passed in from the boot
|
|
# block. Use them *only* if the boot block is unable to determine the correct
|
|
# values. Note that the BIOS may *correctly* report less than 640k of base
|
|
# memory if the extended BIOS data area is located at the top of base memory
|
|
# (as is the case on most recent systems).
|
|
#options REALBASEMEM=639 # size of base memory (in KB)
|
|
#options REALEXTMEM=15360 # size of extended memory (in KB)
|
|
|
|
# Standard system options
|
|
|
|
options INSECURE # disable kernel security levels
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=2048 # 2048 pages is the default
|
|
|
|
options LKM # loadable kernel modules
|
|
|
|
#options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
options TIMER_FREQ=1189200 # LAMB uses nonstandard timer freq
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # expensive kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
|
|
options COMPAT_09 # NetBSD 0.9
|
|
options COMPAT_10 # NetBSD 1.0
|
|
options COMPAT_11 # NetBSD 1.1
|
|
options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
|
|
options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
|
|
options COMPAT_14 # NetBSD 1.4
|
|
options COMPAT_15 # NetBSD 1.5
|
|
options COMPAT_16 # NetBSD 1.6
|
|
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
#options COMPAT_SVR4 # binary compatibility with SVR4
|
|
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
|
|
#options COMPAT_MACH # binary compatibility with Mach binaries
|
|
#options EXEC_MACHO # exec MACH-O binaries
|
|
#options COMPAT_PECOFF # kernel support to run Win32 apps
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
#file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
#file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
#file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
options QUOTA # UFS quotas
|
|
options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
#options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
|
|
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
#
|
|
# wscons options
|
|
#
|
|
# builtin terminal emulations
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
|
|
options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
|
|
#options WS_DEFAULT_FG=WSCOL_WHITE
|
|
#options WS_DEFAULT_BG=WSCOL_BLACK
|
|
#options WS_DEFAULT_COLATTR=""
|
|
#options WS_DEFAULT_MONOATTR=""
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
#options WS_KERNEL_COLATTR=""
|
|
#options WS_KERNEL_MONOATTR=""
|
|
# customization of console border color
|
|
options WSDISPLAY_CUSTOM_BORDER # border customization from wsconsctl(8)
|
|
#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color
|
|
# compatibility to other console drivers
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
# use a large software cursor that doesn't blink
|
|
options PCDISPLAY_SOFTCURSOR
|
|
# modify the screen type of the console; defaults to "80x25"
|
|
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
|
|
# work around a hardware bug that loaded fonts don't work; found on ATI cards
|
|
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
|
|
# the following enables some functions to get mouse console support.
|
|
# if you want a really secure system, it may be better not to enable them,
|
|
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
|
|
#options WSDISPLAY_CHARFUNCS # mouse console support
|
|
|
|
# Kernel root file system and dump configuration.
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on sd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
cpu0 at mainbus0
|
|
#apm0 at mainbus0 # Advanced power management
|
|
|
|
# Tuning for power management, see apm(4) for more details.
|
|
#options APM_NO_IDLE # Don't call BIOS CPU idle function
|
|
#options APM_V10_ONLY # Use only the APM 1.0 calls
|
|
#options APM_NO_POWEROFF # Don't power off on halt(8)
|
|
#options APM_POWER_PRINT # Print stats on the console
|
|
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
|
|
|
|
|
|
# Basic Bus Support
|
|
|
|
# Plug-and-Play BIOS and attached devices
|
|
|
|
#pnpbios* at mainbus?
|
|
|
|
# mainboard audio chips
|
|
#ess* at pnpbios? index ? # ESS AudioDrive
|
|
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
|
|
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
|
|
#ym* at pnpbios? index ? # OPL3-SA3
|
|
|
|
# com port
|
|
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
|
|
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
|
|
# will be no com0. A side effect is pcmcia (and other) com? previously
|
|
# starting at com3 may attach as com1 or com2.
|
|
#com* at pnpbios? index ? # serial ports
|
|
|
|
# parallel port
|
|
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
|
|
# "printer interfaces".
|
|
#lpt* at pnpbios? index ? # parallel ports
|
|
|
|
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
|
|
#fdc* at pnpbios? index ? # floppy controller
|
|
|
|
# Configure PCI using BIOS information
|
|
#options PCIBIOS # PCI BIOS support
|
|
#options PCIBIOSVERBOSE # PCI BIOS verbose info
|
|
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
|
|
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
|
|
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
|
|
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
|
|
#options PCIBIOS_INTR_GUESS # see pcibios(4)
|
|
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
|
|
|
|
# ISA bus support
|
|
isa0 at mainbus?
|
|
|
|
# ISA Plug-and-Play bus support
|
|
isapnp0 at isa?
|
|
|
|
# Coprocessor Support
|
|
|
|
# Math Coprocessor support
|
|
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
|
|
|
|
|
|
# Console Devices
|
|
|
|
# ISA console
|
|
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
|
|
# Keyboard layout configuration for pccons
|
|
#options FRENCH_KBD
|
|
#options FINNISH_KBD
|
|
#options GERMAN_KBD
|
|
#options NORWEGIAN_KBD
|
|
|
|
|
|
# wscons
|
|
#pckbc0 at isa? # pc keyboard controller
|
|
#pckbd* at pckbc? # PC keyboard
|
|
#pms* at pckbc? # PS/2 mouse for wsmouse
|
|
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
|
|
#vga0 at isa?
|
|
#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
|
|
#wsdisplay* at vga? console ?
|
|
#wsdisplay* at pcdisplay? console ?
|
|
#wskbd* at pckbd? console ?
|
|
#wsmouse* at pms? mux 0
|
|
|
|
# no buzzer installed
|
|
#pcppi0 at isa?
|
|
#sysbeep0 at pcppi?
|
|
|
|
# Serial Devices
|
|
|
|
# ISA serial interfaces
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
# ISA parallel printer interfaces
|
|
#lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
#lpt1 at isa? port 0x278
|
|
#lpt2 at isa? port 0x3bc
|
|
|
|
# IDE and related devices
|
|
# ISA Plug-and-Play IDE controllers
|
|
wdc* at isapnp?
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
|
|
# Network Interfaces
|
|
|
|
# ISA network interfaces
|
|
ne0 at isa? port 0x200 irq 3 # LOCAL (left)
|
|
ne1 at isa? port 0x300 irq 10 # GLOBAL (right)
|
|
|
|
|
|
|
|
# Pull in optional local configuration
|
|
#include "arch/i386/conf/LAMB.local"
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device sl 2 # Serial Line IP
|
|
pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
#pseudo-device irframetty # IrDA frame line discipline
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device tb 1 # tablet line discipline
|
|
#pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port i386 yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# wscons pseudo-devices
|
|
#pseudo-device wsmux # mouse & keyboard multiplexor
|
|
#pseudo-device wsfont
|