576 lines
16 KiB
C
576 lines
16 KiB
C
/* $NetBSD: if_aereg.h,v 1.3 1994/10/26 08:46:12 cgd Exp $ */
|
|
|
|
/*
|
|
* National Semiconductor DS8390 NIC register definitions
|
|
*/
|
|
|
|
/*
|
|
* Page 0 register offsets
|
|
*/
|
|
#define AE_P0_CR 0x00 /* Command Register */
|
|
|
|
#define AE_P0_CLDA0 0x01 /* Current Local DMA Addr low (read) */
|
|
#define AE_P0_PSTART 0x01 /* Page Start register (write) */
|
|
|
|
#define AE_P0_CLDA1 0x02 /* Current Local DMA Addr high (read) */
|
|
#define AE_P0_PSTOP 0x02 /* Page Stop register (write) */
|
|
|
|
#define AE_P0_BNRY 0x03 /* Boundary Pointer */
|
|
|
|
#define AE_P0_TSR 0x04 /* Transmit Status Register (read) */
|
|
#define AE_P0_TPSR 0x04 /* Transmit Page Start (write) */
|
|
|
|
#define AE_P0_NCR 0x05 /* Number of Collisions Reg (read) */
|
|
#define AE_P0_TBCR0 0x05 /* Transmit Byte count, low (write) */
|
|
|
|
#define AE_P0_FIFO 0x06 /* FIFO register (read) */
|
|
#define AE_P0_TBCR1 0x06 /* Transmit Byte count, high (write) */
|
|
|
|
#define AE_P0_ISR 0x07 /* Interrupt Status Register */
|
|
|
|
#define AE_P0_CRDA0 0x08 /* Current Remote DMA Addr low (read) */
|
|
#define AE_P0_RSAR0 0x08 /* Remote Start Address low (write) */
|
|
|
|
#define AE_P0_CRDA1 0x09 /* Current Remote DMA Addr high (read) */
|
|
#define AE_P0_RSAR1 0x09 /* Remote Start Address high (write) */
|
|
|
|
#define AE_P0_RBCR0 0x0a /* Remote Byte Count low (write) */
|
|
|
|
#define AE_P0_RBCR1 0x0b /* Remote Byte Count high (write) */
|
|
|
|
#define AE_P0_RSR 0x0c /* Receive Status (read) */
|
|
#define AE_P0_RCR 0x0c /* Receive Configuration Reg (write) */
|
|
|
|
#define AE_P0_CNTR0 0x0d /* frame alignment error counter (read) */
|
|
#define AE_P0_TCR 0x0d /* Transmit Configuration Reg (write) */
|
|
|
|
#define AE_P0_CNTR1 0x0e /* CRC error counter (read) */
|
|
#define AE_P0_DCR 0x0e /* Data Configuration Reg (write) */
|
|
|
|
#define AE_P0_CNTR2 0x0f /* missed packet counter (read) */
|
|
#define AE_P0_IMR 0x0f /* Interrupt Mask Register (write) */
|
|
|
|
/*
|
|
* Page 1 register offsets
|
|
*/
|
|
#define AE_P1_CR 0x00 /* Command Register */
|
|
#define AE_P1_PAR0 0x01 /* Physical Address Register 0 */
|
|
#define AE_P1_PAR1 0x02 /* Physical Address Register 1 */
|
|
#define AE_P1_PAR2 0x03 /* Physical Address Register 2 */
|
|
#define AE_P1_PAR3 0x04 /* Physical Address Register 3 */
|
|
#define AE_P1_PAR4 0x05 /* Physical Address Register 4 */
|
|
#define AE_P1_PAR5 0x06 /* Physical Address Register 5 */
|
|
#define AE_P1_CURR 0x07 /* Current RX ring-buffer page */
|
|
#define AE_P1_MAR0 0x08 /* Multicast Address Register 0 */
|
|
#define AE_P1_MAR1 0x09 /* Multicast Address Register 1 */
|
|
#define AE_P1_MAR2 0x0a /* Multicast Address Register 2 */
|
|
#define AE_P1_MAR3 0x0b /* Multicast Address Register 3 */
|
|
#define AE_P1_MAR4 0x0c /* Multicast Address Register 4 */
|
|
#define AE_P1_MAR5 0x0d /* Multicast Address Register 5 */
|
|
#define AE_P1_MAR6 0x0e /* Multicast Address Register 6 */
|
|
#define AE_P1_MAR7 0x0f /* Multicast Address Register 7 */
|
|
|
|
/*
|
|
* Page 2 register offsets
|
|
*/
|
|
#define AE_P2_CR 0x00 /* Command Register */
|
|
#define AE_P2_PSTART 0x01 /* Page Start (read) */
|
|
#define AE_P2_CLDA0 0x01 /* Current Local DMA Addr 0 (write) */
|
|
#define AE_P2_PSTOP 0x02 /* Page Stop (read) */
|
|
#define AE_P2_CLDA1 0x02 /* Current Local DMA Addr 1 (write) */
|
|
#define AE_P2_RNPP 0x03 /* Remote Next Packet Pointer */
|
|
#define AE_P2_TPSR 0x04 /* Transmit Page Start (read) */
|
|
#define AE_P2_LNPP 0x05 /* Local Next Packet Pointer */
|
|
#define AE_P2_ACU 0x06 /* Address Counter Upper */
|
|
#define AE_P2_ACL 0x07 /* Address Counter Lower */
|
|
#define AE_P2_RCR 0x0c /* Receive Configuration Register (read) */
|
|
#define AE_P2_TCR 0x0d /* Transmit Configuration Register (read) */
|
|
#define AE_P2_DCR 0x0e /* Data Configuration Register (read) */
|
|
#define AE_P2_IMR 0x0f /* Interrupt Mask Register (read) */
|
|
|
|
/*
|
|
* Command Register (CR) definitions
|
|
*/
|
|
|
|
/*
|
|
* STP: SToP. Software reset command. Takes the controller offline. No
|
|
* packets will be received or transmitted. Any reception or
|
|
* transmission in progress will continue to completion before
|
|
* entering reset state. To exit this state, the STP bit must
|
|
* reset and the STA bit must be set. The software reset has
|
|
* executed only when indicated by the RST bit in the ISR being
|
|
* set.
|
|
*/
|
|
#define AE_CR_STP 0x01
|
|
|
|
/*
|
|
* STA: STArt. This bit is used to activate the NIC after either power-up,
|
|
* or when the NIC has been put in reset mode by software command
|
|
* or error.
|
|
*/
|
|
#define AE_CR_STA 0x02
|
|
|
|
/*
|
|
* TXP: Transmit Packet. This bit must be set to indicate transmission of
|
|
* a packet. TXP is internally reset either after the transmission is
|
|
* completed or aborted. This bit should be set only after the Transmit
|
|
* Byte Count and Transmit Page Start register have been programmed.
|
|
*/
|
|
#define AE_CR_TXP 0x04
|
|
|
|
/*
|
|
* RD0, RD1, RD2: Remote DMA Command. These three bits control the operation
|
|
* of the remote DMA channel. RD2 can be set to abort any remote DMA
|
|
* command in progress. The Remote Byte Count registers should be cleared
|
|
* when a remote DMA has been aborted. The Remote Start Addresses are not
|
|
* restored to the starting address if the remote DMA is aborted.
|
|
*
|
|
* RD2 RD1 RD0 function
|
|
* 0 0 0 not allowed
|
|
* 0 0 1 remote read
|
|
* 0 1 0 remote write
|
|
* 0 1 1 send packet
|
|
* 1 X X abort
|
|
*/
|
|
#define AE_CR_RD0 0x08
|
|
#define AE_CR_RD1 0x10
|
|
#define AE_CR_RD2 0x20
|
|
|
|
/*
|
|
* PS0, PS1: Page Select. The two bits select which register set or 'page' to
|
|
* access.
|
|
*
|
|
* PS1 PS0 page
|
|
* 0 0 0
|
|
* 0 1 1
|
|
* 1 0 2
|
|
* 1 1 reserved
|
|
*/
|
|
#define AE_CR_PS0 0x40
|
|
#define AE_CR_PS1 0x80
|
|
/* bit encoded aliases */
|
|
#define AE_CR_PAGE_0 0x00 /* (for consistency) */
|
|
#define AE_CR_PAGE_1 0x40
|
|
#define AE_CR_PAGE_2 0x80
|
|
|
|
/*
|
|
* Interrupt Status Register (ISR) definitions
|
|
*/
|
|
|
|
/*
|
|
* PRX: Packet Received. Indicates packet received with no errors.
|
|
*/
|
|
#define AE_ISR_PRX 0x01
|
|
|
|
/*
|
|
* PTX: Packet Transmitted. Indicates packet transmitted with no errors.
|
|
*/
|
|
#define AE_ISR_PTX 0x02
|
|
|
|
/*
|
|
* RXE: Receive Error. Indicates that a packet was received with one or more
|
|
* the following errors: CRC error, frame alignment error, FIFO overrun,
|
|
* missed packet.
|
|
*/
|
|
#define AE_ISR_RXE 0x04
|
|
|
|
/*
|
|
* TXE: Transmission Error. Indicates that an attempt to transmit a packet
|
|
* resulted in one or more of the following errors: excessive
|
|
* collisions, FIFO underrun.
|
|
*/
|
|
#define AE_ISR_TXE 0x08
|
|
|
|
/*
|
|
* OVW: OverWrite. Indicates a receive ring-buffer overrun. Incoming network
|
|
* would exceed (has exceeded?) the boundry pointer, resulting in data
|
|
* that was previously received and not yet read from the buffer to be
|
|
* overwritten.
|
|
*/
|
|
#define AE_ISR_OVW 0x10
|
|
|
|
/*
|
|
* CNT: Counter Overflow. Set when the MSB of one or more of the Network Talley
|
|
* Counters has been set.
|
|
*/
|
|
#define AE_ISR_CNT 0x20
|
|
|
|
/*
|
|
* RDC: Remote Data Complete. Indicates that a Remote DMA operation has completed.
|
|
*/
|
|
#define AE_ISR_RDC 0x40
|
|
|
|
/*
|
|
* RST: Reset status. Set when the NIC enters the reset state and cleared when a
|
|
* Start Command is issued to the CR. This bit is also set when a receive
|
|
* ring-buffer overrun (OverWrite) occurs and is cleared when one or more
|
|
* packets have been removed from the ring. This is a read-only bit.
|
|
*/
|
|
#define AE_ISR_RST 0x80
|
|
|
|
/*
|
|
* Interrupt Mask Register (IMR) definitions
|
|
*/
|
|
|
|
/*
|
|
* PRXE: Packet Received interrupt Enable. If set, a received packet will cause
|
|
* an interrupt.
|
|
*/
|
|
#define AE_IMR_PRXE 0x01
|
|
|
|
/*
|
|
* PTXE: Packet Transmit interrupt Enable. If set, an interrupt is generated when
|
|
* a packet transmission completes.
|
|
*/
|
|
#define AE_IMR_PTXE 0x02
|
|
|
|
/*
|
|
* RXEE: Receive Error interrupt Enable. If set, an interrupt will occur whenever a
|
|
* packet is received with an error.
|
|
*/
|
|
#define AE_IMR_RXEE 0x04
|
|
|
|
/*
|
|
* TXEE: Transmit Error interrupt Enable. If set, an interrupt will occur whenever
|
|
* a transmission results in an error.
|
|
*/
|
|
#define AE_IMR_TXEE 0x08
|
|
|
|
/*
|
|
* OVWE: OverWrite error interrupt Enable. If set, an interrupt is generated whenever
|
|
* the receive ring-buffer is overrun. i.e. when the boundry pointer is exceeded.
|
|
*/
|
|
#define AE_IMR_OVWE 0x10
|
|
|
|
/*
|
|
* CNTE: Counter overflow interrupt Enable. If set, an interrupt is generated whenever
|
|
* the MSB of one or more of the Network Statistics counters has been set.
|
|
*/
|
|
#define AE_IMR_CNTE 0x20
|
|
|
|
/*
|
|
* RDCE: Remote DMA Complete interrupt Enable. If set, an interrupt is generated
|
|
* when a remote DMA transfer has completed.
|
|
*/
|
|
#define AE_IMR_RDCE 0x40
|
|
|
|
/*
|
|
* bit 7 is unused/reserved
|
|
*/
|
|
|
|
/*
|
|
* Data Configuration Register (DCR) definitions
|
|
*/
|
|
|
|
/*
|
|
* WTS: Word Transfer Select. WTS establishes byte or word transfers for
|
|
* both remote and local DMA transfers
|
|
*/
|
|
#define AE_DCR_WTS 0x01
|
|
|
|
/*
|
|
* BOS: Byte Order Select. BOS sets the byte order for the host.
|
|
* Should be 0 for 80x86, and 1 for 68000 series processors
|
|
*/
|
|
#define AE_DCR_BOS 0x02
|
|
|
|
/*
|
|
* LAS: Long Address Select. When LAS is 1, the contents of the remote
|
|
* DMA registers RSAR0 and RSAR1 are used to provide A16-A31
|
|
*/
|
|
#define AE_DCR_LAS 0x04
|
|
|
|
#ifdef huh
|
|
/*
|
|
* LS: Loopback Select. When 0, loopback mode is selected. Bits D1 and D2
|
|
* of the TCR must also be programmed for loopback operation.
|
|
* When 1, normal operation is selected.
|
|
*/
|
|
#define AE_DCR_LS 0x08
|
|
#endif
|
|
/*
|
|
* BMS: Burst Mode Select
|
|
*/
|
|
#define AE_DCR_BMS 0x08
|
|
|
|
/*
|
|
* AR: Auto-initialize Remote. When 0, data must be removed from ring-buffer
|
|
* under program control. When 1, remote DMA is automatically initiated
|
|
* and the boundry pointer is automatically updated
|
|
*/
|
|
#define AE_DCR_AR 0x10
|
|
|
|
/*
|
|
* FT0, FT1: Fifo Threshold select.
|
|
* FT1 FT0 Word-width Byte-width
|
|
* 0 0 1 word 2 bytes
|
|
* 0 1 2 words 4 bytes
|
|
* 1 0 4 words 8 bytes
|
|
* 1 1 8 words 12 bytes
|
|
*
|
|
* During transmission, the FIFO threshold indicates the number of bytes
|
|
* or words that the FIFO has filled from the local DMA before BREQ is
|
|
* asserted. The transmission threshold is 16 bytes minus the receiver
|
|
* threshold.
|
|
*/
|
|
#define AE_DCR_FT0 0x20
|
|
#define AE_DCR_FT1 0x40
|
|
|
|
/*
|
|
* bit 7 (0x80) is unused/reserved
|
|
*/
|
|
|
|
/*
|
|
* Transmit Configuration Register (TCR) definitions
|
|
*/
|
|
|
|
/*
|
|
* CRC: Inhibit CRC. If 0, CRC will be appended by the transmitter, if 0, CRC
|
|
* is not appended by the transmitter.
|
|
*/
|
|
#define AE_TCR_CRC 0x01
|
|
|
|
/*
|
|
* LB0, LB1: Loopback control. These two bits set the type of loopback that is
|
|
* to be performed.
|
|
*
|
|
* LB1 LB0 mode
|
|
* 0 0 0 - normal operation (DCR_LS = 0)
|
|
* 0 1 1 - internal loopback (DCR_LS = 0)
|
|
* 1 0 2 - external loopback (DCR_LS = 1)
|
|
* 1 1 3 - external loopback (DCR_LS = 0)
|
|
*/
|
|
#define AE_TCR_LB0 0x02
|
|
#define AE_TCR_LB1 0x04
|
|
|
|
/*
|
|
* ATD: Auto Transmit Disable. Clear for normal operation. When set, allows
|
|
* another station to disable the NIC's transmitter by transmitting to
|
|
* a multicast address hashing to bit 62. Reception of a multicast address
|
|
* hashing to bit 63 enables the transmitter.
|
|
*/
|
|
#define AE_TCR_ATD 0x08
|
|
|
|
/*
|
|
* OFST: Collision Offset enable. This bit when set modifies the backoff
|
|
* algorithm to allow prioritization of nodes.
|
|
*/
|
|
#define AE_TCR_OFST 0x10
|
|
|
|
/*
|
|
* bits 5, 6, and 7 are unused/reserved
|
|
*/
|
|
|
|
/*
|
|
* Transmit Status Register (TSR) definitions
|
|
*/
|
|
|
|
/*
|
|
* PTX: Packet Transmitted. Indicates successful transmission of packet.
|
|
*/
|
|
#define AE_TSR_PTX 0x01
|
|
|
|
/*
|
|
* bit 1 (0x02) is unused/reserved
|
|
*/
|
|
|
|
/*
|
|
* COL: Transmit Collided. Indicates that the transmission collided at least
|
|
* once with another station on the network.
|
|
*/
|
|
#define AE_TSR_COL 0x04
|
|
|
|
/*
|
|
* ABT: Transmit aborted. Indicates that the transmission was aborted due to
|
|
* excessive collisions.
|
|
*/
|
|
#define AE_TSR_ABT 0x08
|
|
|
|
/*
|
|
* CRS: Carrier Sense Lost. Indicates that carrier was lost during the
|
|
* transmission of the packet. (Transmission is not aborted because
|
|
* of a loss of carrier)
|
|
*/
|
|
#define AE_TSR_CRS 0x10
|
|
|
|
/*
|
|
* FU: FIFO Underrun. Indicates that the NIC wasn't able to access bus/
|
|
* transmission memory before the FIFO emptied. Transmission of the
|
|
* packet was aborted.
|
|
*/
|
|
#define AE_TSR_FU 0x20
|
|
|
|
/*
|
|
* CDH: CD Heartbeat. Indicates that the collision detection circuitry
|
|
* isn't working correctly during a collision heartbeat test.
|
|
*/
|
|
#define AE_TSR_CDH 0x40
|
|
|
|
/*
|
|
* OWC: Out of Window Collision: Indicates that a collision occurred after
|
|
* a slot time (51.2us). The transmission is rescheduled just as in
|
|
* normal collisions.
|
|
*/
|
|
#define AE_TSR_OWC 0x80
|
|
|
|
/*
|
|
* Receiver Configuration Register (RCR) definitions
|
|
*/
|
|
|
|
/*
|
|
* SEP: Save Errored Packets. If 0, error packets are discarded. If set to 1,
|
|
* packets with CRC and frame errors are not discarded.
|
|
*/
|
|
#define AE_RCR_SEP 0x01
|
|
|
|
/*
|
|
* AR: Accept Runt packet. If 0, packet with less than 64 byte are discarded.
|
|
* If set to 1, packets with less than 64 byte are not discarded.
|
|
*/
|
|
#define AE_RCR_AR 0x02
|
|
|
|
/*
|
|
* AB: Accept Broadcast. If set, packets sent to the broadcast address will be
|
|
* accepted.
|
|
*/
|
|
#define AE_RCR_AB 0x04
|
|
|
|
/*
|
|
* AM: Accept Multicast. If set, packets sent to a multicast address are checked
|
|
* for a match in the hashing array. If clear, multicast packets are ignored.
|
|
*/
|
|
#define AE_RCR_AM 0x08
|
|
|
|
/*
|
|
* PRO: Promiscuous Physical. If set, all packets with a physical addresses are
|
|
* accepted. If clear, a physical destination address must match this
|
|
* station's address. Note: for full promiscuous mode, RCR_AB and RCR_AM
|
|
* must also be set. In addition, the multicast hashing array must be set
|
|
* to all 1's so that all multicast addresses are accepted.
|
|
*/
|
|
#define AE_RCR_PRO 0x10
|
|
|
|
/*
|
|
* MON: Monitor Mode. If set, packets will be checked for good CRC and framing,
|
|
* but are not stored in the ring-buffer. If clear, packets are stored (normal
|
|
* operation).
|
|
*/
|
|
#define AE_RCR_MON 0x20
|
|
|
|
/*
|
|
* bits 6 and 7 are unused/reserved.
|
|
*/
|
|
|
|
/*
|
|
* Receiver Status Register (RSR) definitions
|
|
*/
|
|
|
|
/*
|
|
* PRX: Packet Received without error.
|
|
*/
|
|
#define AE_RSR_PRX 0x01
|
|
|
|
/*
|
|
* CRC: CRC error. Indicates that a packet has a CRC error. Also set for frame
|
|
* alignment errors.
|
|
*/
|
|
#define AE_RSR_CRC 0x02
|
|
|
|
/*
|
|
* FAE: Frame Alignment Error. Indicates that the incoming packet did not end on
|
|
* a byte boundry and the CRC did not match at the last byte boundry.
|
|
*/
|
|
#define AE_RSR_FAE 0x04
|
|
|
|
/*
|
|
* FO: FIFO Overrun. Indicates that the FIFO was not serviced (during local DMA)
|
|
* causing it to overrun. Reception of the packet is aborted.
|
|
*/
|
|
#define AE_RSR_FO 0x08
|
|
|
|
/*
|
|
* MPA: Missed Packet. Indicates that the received packet couldn't be stored in
|
|
* the ring-buffer because of insufficient buffer space (exceeding the
|
|
* boundry pointer), or because the transfer to the ring-buffer was inhibited
|
|
* by RCR_MON - monitor mode.
|
|
*/
|
|
#define AE_RSR_MPA 0x10
|
|
|
|
/*
|
|
* PHY: Physical address. If 0, the packet received was sent to a physical address.
|
|
* If 1, the packet was accepted because of a multicast/broadcast address
|
|
* match.
|
|
*/
|
|
#define AE_RSR_PHY 0x20
|
|
|
|
/*
|
|
* DIS: Receiver Disabled. Set to indicate that the receiver has enetered monitor
|
|
* mode. Cleared when the receiver exits monitor mode.
|
|
*/
|
|
#define AE_RSR_DIS 0x40
|
|
|
|
/*
|
|
* DFR: Deferring. Set to indicate a 'jabber' condition. The CRS and COL inputs
|
|
* are active, and the transceiver has set the CD line as a result of the
|
|
* jabber.
|
|
*/
|
|
#define AE_RSR_DFR 0x80
|
|
|
|
/*
|
|
* receive ring discriptor
|
|
*
|
|
* The National Semiconductor DS8390 Network interface controller uses
|
|
* the following receive ring headers. The way this works is that the
|
|
* memory on the interface card is chopped up into 256 bytes blocks.
|
|
* A contiguous portion of those blocks are marked for receive packets
|
|
* by setting start and end block #'s in the NIC. For each packet that
|
|
* is put into the receive ring, one of these headers (4 bytes each) is
|
|
* tacked onto the front.
|
|
*/
|
|
struct ae_ring {
|
|
u_char rcv_status; /* received packet status */
|
|
u_char next_packet; /* pointer to next packet */
|
|
u_char count[2]; /* bytes in packet (length + 4) */
|
|
};
|
|
|
|
/*
|
|
* Common constants
|
|
*/
|
|
#define AE_PAGE_SIZE 256 /* Size of RAM pages in bytes */
|
|
#define AE_TXBUF_SIZE 6 /* Size of TX buffer in pages */
|
|
|
|
/*
|
|
* Vendor types
|
|
*/
|
|
#define AE_VENDOR_UNKNOWN 0xFF /* Unknown network card */
|
|
#define AE_VENDOR_APPLE 0x00 /* Apple Ethernet card */
|
|
#define AE_VENDOR_INTERLAN 0x01 /* Interlan A310 card (GatorCard) */
|
|
#define AE_VENDOR_DAYNA 0x02 /* DaynaPORT E/30s (and others?) */
|
|
|
|
/*
|
|
* Compile-time config flags
|
|
*/
|
|
/*
|
|
* this sets the default for enabling/disablng the tranceiver
|
|
*/
|
|
#define AE_FLAGS_DISABLE_TRANCEIVER 0x01
|
|
|
|
/*
|
|
* This disables the use of double transmit buffers.
|
|
*/
|
|
#define AE_FLAGS_NO_DOUBLE_BUFFERING 0x08
|
|
|
|
/* */
|
|
#define GC_RESET_OFFSET 0x000c0000 /* writes here reset NIC */
|
|
#define GC_ROM_OFFSET 0x000c0000 /* address prom */
|
|
#define GC_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */
|
|
#define GC_NIC_OFFSET 0x000e0000 /* Offset to NIC registers */
|
|
|
|
#define DP_ROM_OFFSET 0x000f0000
|
|
#define DP_DATA_OFFSET 0x000d0000 /* Offset to SONIC memory */
|
|
#define DP_NIC_OFFSET 0x000e0000 /* Offset to SONIC registers */
|
|
|
|
#define AE_ROM_OFFSET 0x000f0000
|
|
#define AE_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */
|
|
#define AE_NIC_OFFSET 0x000e0000 /* Offset to NIC registers */
|