NetBSD/sys/dev/ic/atppcvar.h

261 lines
7.7 KiB
C

/* $NetBSD: atppcvar.h,v 1.8 2007/03/04 06:01:50 christos Exp $ */
/*-
* Copyright (c) 2001 Alcove - Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* FreeBSD: src/sys/isa/ppcreg.h,v 1.10.2.4 2001/10/02 05:21:45 nsouch Exp
*
*/
#ifndef __ATPPCVAR_H
#define __ATPPCVAR_H
#include <machine/bus.h>
#include <machine/types.h>
#include <sys/device.h>
#include <sys/callout.h>
#include <dev/ppbus/ppbus_conf.h>
/* Maximum time to wait for device response */
#define MAXBUSYWAIT (5 * (hz))
/* Poll interval when wating for device to become ready */
#define ATPPC_POLL ((hz)/10)
/* Interrupt priority level for atppc device */
#define IPL_ATPPC IPL_TTY
#define splatppc spltty
/* Diagnostic and verbose printing macros */
#ifdef ATPPC_DEBUG
extern int atppc_debug;
#define ATPPC_DPRINTF(arg) if(atppc_debug) printf arg
#else
#define ATPPC_DPRINTF(arg)
#endif
#ifdef ATPPC_VERBOSE
extern int atppc_verbose;
#define ATPPC_VPRINTF(arg) if(atppc_verbose) printf arg
#else
#define ATPPC_VPRINTF(arg)
#endif
/* Flag used in DMA transfer */
#define ATPPC_DMA_MODE_READ 0x0
#define ATPPC_DMA_MODE_WRITE 0x1
/* Flags passed via config */
#define ATPPC_FLAG_DISABLE_INTR 0x01
#define ATPPC_FLAG_DISABLE_DMA 0x02
/* Locking for atppc device */
#if defined(MULTIPROCESSOR) || defined (LOCKDEBUG)
#include <sys/lock.h>
#define ATPPC_SC_LOCK(sc) (&((sc)->sc_lock))
#define ATPPC_LOCK_INIT(sc) simple_lock_init(ATPPC_SC_LOCK((sc)))
#define ATPPC_LOCK(sc) simple_lock(ATPPC_SC_LOCK((sc)))
#define ATPPC_UNLOCK(sc) simple_unlock(ATPPC_SC_LOCK((sc)))
#else /* !(MULTIPROCESSOR) && !(LOCKDEBUG) */
#define ATPPC_LOCK_INIT(sc)
#define ATPPC_LOCK(sc)
#define ATPPC_UNLOCK(sc)
#define ATPPC_SC_LOCK(sc) NULL
#endif /* MULTIPROCESSOR || LOCKDEBUG */
/* Single softintr callback entry */
struct atppc_handler_node {
void (*func)(void *);
void *arg;
SLIST_ENTRY(atppc_handler_node) entries;
};
/* Generic structure to hold parallel port chipset info. */
struct atppc_softc {
/* Generic device attributes */
struct device sc_dev;
#if defined(MULTIPROCESSOR) || defined(LOCKDEBUG)
/* Simple lock */
struct simplelock sc_lock;
#endif
/* Machine independent bus infrastructure */
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmapt;
bus_size_t sc_dma_maxsize;
/* Child device */
struct device * child;
/* Opaque handle used for interrupt handler establishment */
void *sc_ieh;
/* List of soft interrupts to call */
SLIST_HEAD(handler_list, atppc_handler_node) sc_handler_listhead;
/* Input buffer: working pointers, and size in bytes. */
char * sc_inb;
char * sc_inbstart;
u_int32_t sc_inb_nbytes;
int sc_inerr;
/* Output buffer pointer, working pointer, and size in bytes. */
char * sc_outb;
char * sc_outbstart;
u_int32_t sc_outb_nbytes;
int sc_outerr;
/* DMA functions: setup by bus specific attach code */
int (*sc_dma_start)(struct atppc_softc *, void *, u_int, u_int8_t);
int (*sc_dma_finish)(struct atppc_softc *);
int (*sc_dma_abort)(struct atppc_softc *);
int (*sc_dma_malloc)(struct device *, void **, bus_addr_t *,
bus_size_t);
void (*sc_dma_free)(struct device *, void **, bus_addr_t *,
bus_size_t);
/* Microsequence related members */
char * sc_ptr; /* microseq current pointer */
int sc_accum; /* microseq accumulator */
/* Device attachment state */
#define ATPPC_ATTACHED 1
#define ATPPC_NOATTACH 0
u_int8_t sc_dev_ok;
/*
* Hardware capabilities flags: standard mode and nibble mode are
* assumed to always be available since if they aren't you don't
* HAVE a parallel port.
*/
#define ATPPC_HAS_INTR 0x01 /* Interrupt available */
#define ATPPC_HAS_DMA 0x02 /* DMA available */
#define ATPPC_HAS_FIFO 0x04 /* FIFO available */
#define ATPPC_HAS_PS2 0x08 /* PS2 mode capable */
#define ATPPC_HAS_ECP 0x10 /* ECP mode available */
#define ATPPC_HAS_EPP 0x20 /* EPP mode available */
u_int8_t sc_has; /* Chipset detected capabilities */
/* Flags specifying mode of chipset operation . */
#define ATPPC_MODE_STD 0x01 /* Use centronics-compatible mode */
#define ATPPC_MODE_PS2 0x02 /* Use PS2 mode */
#define ATPPC_MODE_EPP 0x04 /* Use EPP mode */
#define ATPPC_MODE_ECP 0x08 /* Use ECP mode */
#define ATPPC_MODE_NIBBLE 0x10 /* Use nibble mode */
#define ATPPC_MODE_FAST 0x20 /* Use Fast Centronics mode */
u_int8_t sc_mode; /* Current operational mode */
/* Flags which further define chipset operation */
#define ATPPC_USE_INTR 0x01 /* Use interrupts */
#define ATPPC_USE_DMA 0x02 /* Use DMA */
u_int8_t sc_use; /* Capabilities to use */
/* Parallel Port Chipset model. */
#define SMC_LIKE 0
#define SMC_37C665GT 1
#define SMC_37C666GT 2
#define NS_PC87332 3
#define NS_PC87306 4
#define INTEL_820191AA 5 /* XXX not implemented */
#define GENERIC 6
#define WINB_W83877F 7
#define WINB_W83877AF 8
#define WINB_UNKNOWN 9
#define NS_PC87334 10
#define SMC_37C935 11
#define NS_PC87303 12
u_int8_t sc_model; /* chipset model */
/* EPP mode */
#define ATPPC_EPP_1_9 0x0
#define ATPPC_EPP_1_7 0x1
u_int8_t sc_epp;
/* Parallel Port Chipset Type. SMC versus GENERIC (others) */
#define ATPPC_TYPE_SMCLIKE 0
#define ATPPC_TYPE_GENERIC 1
u_int8_t sc_type; /* generic or smclike chipset type */
/* Stored register values after an interrupt occurs */
u_int8_t sc_ecr_intr;
u_int8_t sc_ctr_intr;
u_int8_t sc_str_intr;
#define ATPPC_IRQ_NONE 0x0
#define ATPPC_IRQ_nACK 0x1
#define ATPPC_IRQ_DMA 0x2
#define ATPPC_IRQ_FIFO 0x4
#define ATPPC_IRQ_nFAULT 0x8
u_int8_t sc_irqstat; /* Record irq settings */
#define ATPPC_DMA_INIT 0x01
#define ATPPC_DMA_STARTED 0x02
#define ATPPC_DMA_COMPLETE 0x03
#define ATPPC_DMA_INTERRUPTED 0x04
#define ATPPC_DMA_ERROR 0x05
u_int8_t sc_dmastat; /* Record dma state */
#define ATPPC_PWORD_MASK 0x30
#define ATPPC_PWORD_16 0x00
#define ATPPC_PWORD_8 0x10
#define ATPPC_PWORD_32 0x20
u_int8_t sc_pword; /* PWord size: used for FIFO DMA transfers */
u_int8_t sc_fifo; /* FIFO size */
/* Indicates number of PWords in FIFO queues that generate interrupt */
u_int8_t sc_wthr; /* writeIntrThresold */
u_int8_t sc_rthr; /* readIntrThresold */
};
#ifdef _KERNEL
/* Function prototypes */
/* Soft config attach/detach routines */
void atppc_sc_attach(struct atppc_softc *);
int atppc_sc_detach(struct atppc_softc *, int);
/* Detection routines */
int atppc_detect_port(bus_space_tag_t, bus_space_handle_t);
/* Interrupt handler for atppc device */
int atppcintr(void *);
#endif /* _KERNEL */
#endif /* __ATPPCVAR_H */