338 lines
9.9 KiB
C
338 lines
9.9 KiB
C
/* $OpenBSD: rt2661reg.h,v 1.5 2006/01/14 12:43:27 damien Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2006
|
|
* Damien Bergamini <damien.bergamini@free.fr>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#define RT2661_TX_RING_COUNT 32
|
|
#define RT2661_MGT_RING_COUNT 32
|
|
#define RT2661_RX_RING_COUNT 64
|
|
|
|
#define RT2661_TX_DESC_SIZE (sizeof (struct rt2661_tx_desc))
|
|
#define RT2661_TX_DESC_WSIZE (RT2661_TX_DESC_SIZE / 4)
|
|
#define RT2661_RX_DESC_SIZE (sizeof (struct rt2661_rx_desc))
|
|
#define RT2661_RX_DESC_WSIZE (RT2661_RX_DESC_SIZE / 4)
|
|
|
|
#define RT2661_MAX_SCATTER 5
|
|
|
|
/*
|
|
* Control and status registers.
|
|
*/
|
|
#define RT2661_HOST_CMD_CSR 0x0008
|
|
#define RT2661_MCU_CNTL_CSR 0x000c
|
|
#define RT2661_SOFT_RESET_CSR 0x0010
|
|
#define RT2661_MCU_INT_SOURCE_CSR 0x0014
|
|
#define RT2661_MCU_INT_MASK_CSR 0x0018
|
|
#define RT2661_PCI_USEC_CSR 0x001c
|
|
#define RT2661_H2M_MAILBOX_CSR 0x2100
|
|
#define RT2661_M2H_CMD_DONE_CSR 0x2104
|
|
#define RT2661_HW_BEACON_BASE0 0x2c00
|
|
#define RT2661_MAC_CSR0 0x3000
|
|
#define RT2661_MAC_CSR1 0x3004
|
|
#define RT2661_MAC_CSR2 0x3008
|
|
#define RT2661_MAC_CSR3 0x300c
|
|
#define RT2661_MAC_CSR4 0x3010
|
|
#define RT2661_MAC_CSR5 0x3014
|
|
#define RT2661_MAC_CSR6 0x3018
|
|
#define RT2661_MAC_CSR7 0x301c
|
|
#define RT2661_MAC_CSR8 0x3020
|
|
#define RT2661_MAC_CSR9 0x3024
|
|
#define RT2661_MAC_CSR10 0x3028
|
|
#define RT2661_MAC_CSR11 0x302c
|
|
#define RT2661_MAC_CSR12 0x3030
|
|
#define RT2661_MAC_CSR13 0x3034
|
|
#define RT2661_MAC_CSR14 0x3038
|
|
#define RT2661_MAC_CSR15 0x303c
|
|
#define RT2661_TXRX_CSR0 0x3040
|
|
#define RT2661_TXRX_CSR1 0x3044
|
|
#define RT2661_TXRX_CSR2 0x3048
|
|
#define RT2661_TXRX_CSR3 0x304c
|
|
#define RT2661_TXRX_CSR4 0x3050
|
|
#define RT2661_TXRX_CSR5 0x3054
|
|
#define RT2661_TXRX_CSR6 0x3058
|
|
#define RT2661_TXRX_CSR7 0x305c
|
|
#define RT2661_TXRX_CSR8 0x3060
|
|
#define RT2661_TXRX_CSR9 0x3064
|
|
#define RT2661_TXRX_CSR10 0x3068
|
|
#define RT2661_TXRX_CSR11 0x306c
|
|
#define RT2661_TXRX_CSR12 0x3070
|
|
#define RT2661_TXRX_CSR13 0x3074
|
|
#define RT2661_TXRX_CSR14 0x3078
|
|
#define RT2661_TXRX_CSR15 0x307c
|
|
#define RT2661_PHY_CSR0 0x3080
|
|
#define RT2661_PHY_CSR1 0x3084
|
|
#define RT2661_PHY_CSR2 0x3088
|
|
#define RT2661_PHY_CSR3 0x308c
|
|
#define RT2661_PHY_CSR4 0x3090
|
|
#define RT2661_PHY_CSR5 0x3094
|
|
#define RT2661_PHY_CSR6 0x3098
|
|
#define RT2661_PHY_CSR7 0x309c
|
|
#define RT2661_SEC_CSR0 0x30a0
|
|
#define RT2661_SEC_CSR1 0x30a4
|
|
#define RT2661_SEC_CSR2 0x30a8
|
|
#define RT2661_SEC_CSR3 0x30ac
|
|
#define RT2661_SEC_CSR4 0x30b0
|
|
#define RT2661_SEC_CSR5 0x30b4
|
|
#define RT2661_STA_CSR0 0x30c0
|
|
#define RT2661_STA_CSR1 0x30c4
|
|
#define RT2661_STA_CSR2 0x30c8
|
|
#define RT2661_STA_CSR3 0x30cc
|
|
#define RT2661_STA_CSR4 0x30d0
|
|
#define RT2661_AC0_BASE_CSR 0x3400
|
|
#define RT2661_AC1_BASE_CSR 0x3404
|
|
#define RT2661_AC2_BASE_CSR 0x3408
|
|
#define RT2661_AC3_BASE_CSR 0x340c
|
|
#define RT2661_MGT_BASE_CSR 0x3410
|
|
#define RT2661_TX_RING_CSR0 0x3418
|
|
#define RT2661_TX_RING_CSR1 0x341c
|
|
#define RT2661_AIFSN_CSR 0x3420
|
|
#define RT2661_CWMIN_CSR 0x3424
|
|
#define RT2661_CWMAX_CSR 0x3428
|
|
#define RT2661_TX_DMA_DST_CSR 0x342c
|
|
#define RT2661_TX_CNTL_CSR 0x3430
|
|
#define RT2661_LOAD_TX_RING_CSR 0x3434
|
|
#define RT2661_RX_BASE_CSR 0x3450
|
|
#define RT2661_RX_RING_CSR 0x3454
|
|
#define RT2661_RX_CNTL_CSR 0x3458
|
|
#define RT2661_PCI_CFG_CSR 0x3460
|
|
#define RT2661_INT_SOURCE_CSR 0x3468
|
|
#define RT2661_INT_MASK_CSR 0x346c
|
|
#define RT2661_E2PROM_CSR 0x3470
|
|
#define RT2661_AC_TXOP_CSR0 0x3474
|
|
#define RT2661_AC_TXOP_CSR1 0x3478
|
|
#define RT2661_TEST_MODE_CSR 0x3484
|
|
#define RT2661_IO_CNTL_CSR 0x3498
|
|
#define RT2661_MCU_CODE_BASE 0x4000
|
|
|
|
|
|
/* possible flags for register HOST_CMD_CSR */
|
|
#define RT2661_KICK_CMD (1 << 7)
|
|
/* Host to MCU (8051) command identifiers */
|
|
#define RT2661_MCU_CMD_SLEEP 0x30
|
|
#define RT2661_MCU_CMD_WAKEUP 0x31
|
|
#define RT2661_MCU_SET_LED 0x50
|
|
#define RT2661_MCU_SET_RSSI_LED 0x52
|
|
|
|
/* possible flags for register MCU_CNTL_CSR */
|
|
#define RT2661_MCU_SEL (1 << 0)
|
|
#define RT2661_MCU_RESET (1 << 1)
|
|
#define RT2661_MCU_READY (1 << 2)
|
|
|
|
/* possible flags for register MCU_INT_SOURCE_CSR */
|
|
#define RT2661_MCU_CMD_DONE 0xff
|
|
#define RT2661_MCU_WAKEUP (1 << 8)
|
|
#define RT2661_MCU_BEACON_EXPIRE (1 << 9)
|
|
|
|
/* possible flags for register H2M_MAILBOX_CSR */
|
|
#define RT2661_H2M_BUSY (1 << 24)
|
|
#define RT2661_TOKEN_NO_INTR 0xff
|
|
|
|
/* possible flags for register MAC_CSR5 */
|
|
#define RT2661_ONE_BSSID 3
|
|
|
|
/* possible flags for register TXRX_CSR0 */
|
|
/* Tx filter flags are in the low 16 bits */
|
|
#define RT2661_AUTO_TX_SEQ (1 << 15)
|
|
/* Rx filter flags are in the high 16 bits */
|
|
#define RT2661_DISABLE_RX (1 << 16)
|
|
#define RT2661_DROP_CRC_ERROR (1 << 17)
|
|
#define RT2661_DROP_PHY_ERROR (1 << 18)
|
|
#define RT2661_DROP_CTL (1 << 19)
|
|
#define RT2661_DROP_NOT_TO_ME (1 << 20)
|
|
#define RT2661_DROP_TODS (1 << 21)
|
|
#define RT2661_DROP_VER_ERROR (1 << 22)
|
|
#define RT2661_DROP_MULTICAST (1 << 23)
|
|
#define RT2661_DROP_BROADCAST (1 << 24)
|
|
#define RT2661_DROP_ACKCTS (1 << 25)
|
|
|
|
/* possible flags for register TXRX_CSR4 */
|
|
#define RT2661_SHORT_PREAMBLE (1 << 19)
|
|
#define RT2661_MRR_ENABLED (1 << 20)
|
|
#define RT2661_MRR_CCK_FALLBACK (1 << 23)
|
|
|
|
/* possible flags for register TXRX_CSR9 */
|
|
#define RT2661_TSF_TICKING (1 << 16)
|
|
#define RT2661_TSF_MODE(x) (((x) & 0x3) << 17)
|
|
/* TBTT stands for Target Beacon Transmission Time */
|
|
#define RT2661_ENABLE_TBTT (1 << 19)
|
|
#define RT2661_GENERATE_BEACON (1 << 20)
|
|
|
|
/* possible flags for register PHY_CSR0 */
|
|
#define RT2661_PA_PE_2GHZ (1 << 16)
|
|
#define RT2661_PA_PE_5GHZ (1 << 17)
|
|
|
|
/* possible flags for register PHY_CSR3 */
|
|
#define RT2661_BBP_READ (1 << 15)
|
|
#define RT2661_BBP_BUSY (1 << 16)
|
|
|
|
/* possible flags for register PHY_CSR4 */
|
|
#define RT2661_RF_21BIT (21 << 24)
|
|
#define RT2661_RF_BUSY (1 << 31)
|
|
|
|
/* possible values for register STA_CSR4 */
|
|
#define RT2661_TX_STAT_VALID (1 << 0)
|
|
#define RT2661_TX_RESULT(v) (((v) >> 1) & 0x7)
|
|
#define RT2661_TX_RETRYCNT(v) (((v) >> 4) & 0xf)
|
|
#define RT2661_TX_QID(v) (((v) >> 8) & 0xf)
|
|
#define RT2661_TX_SUCCESS 0
|
|
#define RT2661_TX_RETRY_FAIL 6
|
|
|
|
/* possible flags for register TX_CNTL_CSR */
|
|
#define RT2661_KICK_MGT (1 << 4)
|
|
|
|
/* possible flags for register INT_SOURCE_CSR */
|
|
#define RT2661_TX_DONE (1 << 0)
|
|
#define RT2661_RX_DONE (1 << 1)
|
|
#define RT2661_TX0_DMA_DONE (1 << 16)
|
|
#define RT2661_TX1_DMA_DONE (1 << 17)
|
|
#define RT2661_TX2_DMA_DONE (1 << 18)
|
|
#define RT2661_TX3_DMA_DONE (1 << 19)
|
|
#define RT2661_MGT_DONE (1 << 20)
|
|
|
|
/* possible flags for register E2PROM_CSR */
|
|
#define RT2661_C (1 << 1)
|
|
#define RT2661_S (1 << 2)
|
|
#define RT2661_D (1 << 3)
|
|
#define RT2661_Q (1 << 4)
|
|
#define RT2661_93C46 (1 << 5)
|
|
|
|
/* Tx descriptor */
|
|
struct rt2661_tx_desc {
|
|
uint32_t flags;
|
|
#define RT2661_TX_BUSY (1 << 0)
|
|
#define RT2661_TX_VALID (1 << 1)
|
|
#define RT2661_TX_MORE_FRAG (1 << 2)
|
|
#define RT2661_TX_NEED_ACK (1 << 3)
|
|
#define RT2661_TX_TIMESTAMP (1 << 4)
|
|
#define RT2661_TX_OFDM (1 << 5)
|
|
#define RT2661_TX_IFS (1 << 6)
|
|
#define RT2661_TX_LONG_RETRY (1 << 7)
|
|
#define RT2661_TX_BURST (1 << 28)
|
|
|
|
uint16_t wme;
|
|
#define RT2661_QID(v) (v)
|
|
#define RT2661_AIFSN(v) ((v) << 4)
|
|
#define RT2661_LOGCWMIN(v) ((v) << 8)
|
|
#define RT2661_LOGCWMAX(v) ((v) << 12)
|
|
|
|
uint16_t xflags;
|
|
#define RT2661_TX_HWSEQ (1 << 12)
|
|
|
|
uint8_t plcp_signal;
|
|
uint8_t plcp_service;
|
|
#define RT2661_PLCP_LENGEXT 0x80
|
|
|
|
uint8_t plcp_length_lo;
|
|
uint8_t plcp_length_hi;
|
|
|
|
uint32_t iv;
|
|
uint32_t eiv;
|
|
|
|
uint8_t offset;
|
|
uint8_t qid;
|
|
#define RT2661_QID_MGT 13
|
|
|
|
uint8_t txpower;
|
|
#define RT2661_DEFAULT_TXPOWER 0
|
|
|
|
uint8_t reserved1;
|
|
|
|
uint32_t addr[RT2661_MAX_SCATTER];
|
|
uint16_t len[RT2661_MAX_SCATTER];
|
|
|
|
uint16_t reserved2;
|
|
} __packed;
|
|
|
|
/* Rx descriptor */
|
|
struct rt2661_rx_desc {
|
|
uint32_t flags;
|
|
#define RT2661_RX_BUSY (1 << 0)
|
|
#define RT2661_RX_DROP (1 << 1)
|
|
#define RT2661_RX_CRC_ERROR (1 << 6)
|
|
#define RT2661_RX_OFDM (1 << 7)
|
|
#define RT2661_RX_PHY_ERROR (1 << 8)
|
|
#define RT2661_RX_CIPHER_MASK 0x00000600
|
|
|
|
uint8_t rate;
|
|
uint8_t rssi;
|
|
uint8_t reserved1;
|
|
uint8_t offset;
|
|
uint32_t iv;
|
|
uint32_t eiv;
|
|
uint32_t reserved2;
|
|
uint32_t physaddr;
|
|
uint32_t reserved3[10];
|
|
} __packed;
|
|
|
|
#define RAL_RF1 0
|
|
#define RAL_RF2 2
|
|
#define RAL_RF3 1
|
|
#define RAL_RF4 3
|
|
|
|
/* dual-band RF */
|
|
#define RT2661_RF_5225 1
|
|
#define RT2661_RF_5325 2
|
|
/* single-band RF */
|
|
#define RT2661_RF_2527 3
|
|
#define RT2661_RF_2529 4
|
|
|
|
#define RT2661_RX_DESC_BACK 4
|
|
|
|
#define RT2661_SMART_MODE (1 << 0)
|
|
|
|
#define RT2661_BBPR94_DEFAULT 6
|
|
|
|
#define RT2661_SHIFT_D 3
|
|
#define RT2661_SHIFT_Q 4
|
|
|
|
#define RT2661_EEPROM_MAC01 0x02
|
|
#define RT2661_EEPROM_MAC23 0x03
|
|
#define RT2661_EEPROM_MAC45 0x04
|
|
#define RT2661_EEPROM_ANTENNA 0x10
|
|
#define RT2661_EEPROM_CONFIG2 0x11
|
|
#define RT2661_EEPROM_BBP_BASE 0x13
|
|
#define RT2661_EEPROM_TXPOWER 0x23
|
|
#define RT2661_EEPROM_FREQ_OFFSET 0x2f
|
|
#define RT2661_EEPROM_RSSI_2GHZ_OFFSET 0x4d
|
|
#define RT2661_EEPROM_RSSI_5GHZ_OFFSET 0x4e
|
|
|
|
#define RT2661_EEPROM_DELAY 1 /* minimum hold time (microsecond) */
|
|
|
|
/*
|
|
* control and status registers access macros
|
|
*/
|
|
#define RAL_READ(sc, reg) \
|
|
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
|
|
|
|
#define RAL_READ_REGION_4(sc, offset, datap, count) \
|
|
bus_space_read_region_4((sc)->sc_st, (sc)->sc_sh, (offset), \
|
|
(datap), (count))
|
|
|
|
#define RAL_WRITE(sc, reg, val) \
|
|
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
|
|
|
|
#define RAL_WRITE_REGION_1(sc, offset, datap, count) \
|
|
bus_space_write_region_1((sc)->sc_st, (sc)->sc_sh, (offset), \
|
|
(datap), (count))
|
|
|
|
/*
|
|
* EEPROM access macro
|
|
*/
|
|
#define RT2661_EEPROM_CTL(sc, val) do { \
|
|
RAL_WRITE((sc), RT2661_E2PROM_CSR, (val)); \
|
|
DELAY(RT2661_EEPROM_DELAY); \
|
|
} while (/* CONSTCOND */0)
|