455 lines
17 KiB
C
455 lines
17 KiB
C
/* $NetBSD: sbicreg.h,v 1.1 2001/10/05 22:27:58 reinoud Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)scsireg.h 7.3 (Berkeley) 2/5/91
|
|
*/
|
|
|
|
/*
|
|
* AMD AM33C93A SCSI interface hardware description.
|
|
*
|
|
* Using parts of the Mach scsi driver for the 33C93
|
|
*/
|
|
|
|
#define SBIC_myid 0
|
|
#define SBIC_cdbsize 0
|
|
#define SBIC_control 1
|
|
#define SBIC_timeo 2
|
|
#define SBIC_cdb1 3
|
|
#define SBIC_tsecs 3
|
|
#define SBIC_cdb2 4
|
|
#define SBIC_theads 4
|
|
#define SBIC_cdb3 5
|
|
#define SBIC_tcyl_hi 5
|
|
#define SBIC_cdb4 6
|
|
#define SBIC_tcyl_lo 6
|
|
#define SBIC_cdb5 7
|
|
#define SBIC_addr_hi 7
|
|
#define SBIC_cdb6 8
|
|
#define SBIC_addr_2 8
|
|
#define SBIC_cdb7 9
|
|
#define SBIC_addr_3 9
|
|
#define SBIC_cdb8 10
|
|
#define SBIC_addr_lo 10
|
|
#define SBIC_cdb9 11
|
|
#define SBIC_secno 11
|
|
#define SBIC_cdb10 12
|
|
#define SBIC_headno 12
|
|
#define SBIC_cdb11 13
|
|
#define SBIC_cylno_hi 13
|
|
#define SBIC_cdb12 14
|
|
#define SBIC_cylno_lo 14
|
|
#define SBIC_tlun 15
|
|
#define SBIC_cmd_phase 16
|
|
#define SBIC_syn 17
|
|
#define SBIC_count_hi 18
|
|
#define SBIC_count_med 19
|
|
#define SBIC_count_lo 20
|
|
#define SBIC_selid 21
|
|
#define SBIC_rselid 22
|
|
#define SBIC_csr 23
|
|
#define SBIC_cmd 24
|
|
#define SBIC_data 25
|
|
/* sbic_asr is addressed directly */
|
|
|
|
/*
|
|
* Register defines
|
|
*/
|
|
|
|
/*
|
|
* Auxiliary Status Register
|
|
*/
|
|
|
|
#define SBIC_ASR_INT 0x80 /* Interrupt pending */
|
|
#define SBIC_ASR_LCI 0x40 /* Last command ignored */
|
|
#define SBIC_ASR_BSY 0x20 /* Busy, only cmd/data/asr readable */
|
|
#define SBIC_ASR_CIP 0x10 /* Busy, cmd unavail also */
|
|
#define SBIC_ASR_xxx 0x0c
|
|
#define SBIC_ASR_PE 0x02 /* Parity error (even) */
|
|
#define SBIC_ASR_DBR 0x01 /* Data Buffer Ready */
|
|
|
|
/*
|
|
* My ID register, and/or CDB Size
|
|
*/
|
|
|
|
#define SBIC_ID_FS_8_10 0x00 /* Input clock is 8-10 Mhz */
|
|
/* 11 Mhz is invalid */
|
|
#define SBIC_ID_FS_12_15 0x40 /* Input clock is 12-15 Mhz */
|
|
#define SBIC_ID_FS_16_20 0x80 /* Input clock is 16-20 Mhz */
|
|
#define SBIC_ID_EHP 0x10 /* Enable host parity */
|
|
#define SBIC_ID_EAF 0x08 /* Enable Advanced Features */
|
|
#define SBIC_ID_MASK 0x07
|
|
#define SBIC_ID_CBDSIZE_MASK 0x0f /* if unk SCSI cmd group */
|
|
|
|
/*
|
|
* Control register
|
|
*/
|
|
|
|
#define SBIC_CTL_DMA 0x80 /* Single byte dma */
|
|
#define SBIC_CTL_DBA_DMA 0x40 /* direct buffer acces (bus master)*/
|
|
#define SBIC_CTL_BURST_DMA 0x20 /* continuous mode (8237) */
|
|
#define SBIC_CTL_NO_DMA 0x00 /* Programmed I/O */
|
|
#define SBIC_CTL_HHP 0x10 /* Halt on host parity error */
|
|
#define SBIC_CTL_EDI 0x08 /* Ending disconnect interrupt */
|
|
#define SBIC_CTL_IDI 0x04 /* Intermediate disconnect interrupt*/
|
|
#define SBIC_CTL_HA 0x02 /* Halt on ATN */
|
|
#define SBIC_CTL_HSP 0x01 /* Halt on SCSI parity error */
|
|
|
|
/*
|
|
* Timeout period register
|
|
* [val in msecs, input clk in 0.1 Mhz]
|
|
*/
|
|
|
|
#define SBIC_TIMEOUT(val,clk) ((((val) * (clk)) / 800) + 1)
|
|
|
|
/*
|
|
* CDBn registers, note that
|
|
* cdb11 is used for status byte in target mode (send-status-and-cc)
|
|
* cdb12 sez if linked command complete, and w/flag if so
|
|
*/
|
|
|
|
/*
|
|
* Target LUN register
|
|
* [holds target status when select-and-xfer]
|
|
*/
|
|
|
|
#define SBIC_TLUN_VALID 0x80 /* did we receive an Identify msg */
|
|
#define SBIC_TLUN_DOK 0x40 /* Disconnect OK */
|
|
#define SBIC_TLUN_xxx 0x38
|
|
#define SBIC_TLUN_MASK 0x07
|
|
|
|
/*
|
|
* Command Phase register
|
|
*/
|
|
|
|
#define SBIC_CPH_MASK 0x7f /* values/restarts are cmd specific */
|
|
#define SBIC_CPH(p) ((p) & SBIC_CPH_MASK)
|
|
|
|
/*
|
|
* FIFO register
|
|
*/
|
|
|
|
#define SBIC_FIFO_DEEP 12
|
|
|
|
/*
|
|
* maximum possible size in TC registers. Since this is 24 bit, it's easy
|
|
*/
|
|
#define SBIC_TC_MAX ((1 << 24) - 1)
|
|
|
|
/*
|
|
* Synchronous xfer register
|
|
*/
|
|
|
|
#define SBIC_SYN_OFF_MASK 0x0f
|
|
#define SBIC_SYN_MAX_OFFSET SBIC_FIFO_DEEP
|
|
#define SBIC_SYN_PER_MASK 0x70
|
|
#define SBIC_SYN_MIN_PERIOD 2 /* upto 8, encoded as 0 */
|
|
|
|
#define SBIC_SYN(o,p) \
|
|
(((o) & SBIC_SYN_OFF_MASK) | (((p) << 4) & SBIC_SYN_PER_MASK))
|
|
|
|
/*
|
|
* Transfer count register
|
|
* optimal access macros depend on addressing
|
|
*/
|
|
|
|
/*
|
|
* Destination ID (selid) register
|
|
*/
|
|
|
|
#define SBIC_SID_SCC 0x80 /* Select command chaining (tgt) */
|
|
#define SBIC_SID_DPD 0x40 /* Data phase direction (inittor) */
|
|
#define SBIC_SID_FROM_SCSI 0x40
|
|
#define SBIC_SID_TO_SCSI 0x00
|
|
#define SBIC_SID_xxx 0x38
|
|
#define SBIC_SID_IDMASK 0x07
|
|
|
|
/*
|
|
* Source ID (rselid) register
|
|
*/
|
|
|
|
#define SBIC_RID_ER 0x80 /* Enable reselection */
|
|
#define SBIC_RID_ES 0x40 /* Enable selection */
|
|
#define SBIC_RID_DSP 0x20 /* Disable select parity */
|
|
#define SBIC_RID_SIV 0x08 /* Source ID valid */
|
|
#define SBIC_RID_MASK 0x07
|
|
|
|
/*
|
|
* Status register
|
|
*/
|
|
|
|
#define SBIC_CSR_CAUSE 0xf0
|
|
#define SBIC_CSR_RESET 0x00 /* chip was reset */
|
|
#define SBIC_CSR_CMD_DONE 0x10 /* cmd completed */
|
|
#define SBIC_CSR_CMD_STOPPED 0x20 /* interrupted or abrted*/
|
|
#define SBIC_CSR_CMD_ERR 0x40 /* end with error */
|
|
#define SBIC_CSR_BUS_SERVICE 0x80 /* REQ pending on the bus */
|
|
|
|
|
|
#define SBIC_CSR_QUALIFIER 0x0f
|
|
/* Reset State Interrupts */
|
|
#define SBIC_CSR_RESET 0x00 /* reset w/advanced features*/
|
|
#define SBIC_CSR_RESET_AM 0x01 /* reset w/advanced features*/
|
|
/* Successful Completion Interrupts */
|
|
#define SBIC_CSR_TARGET 0x10 /* reselect complete */
|
|
#define SBIC_CSR_INITIATOR 0x11 /* select complete */
|
|
#define SBIC_CSR_WO_ATN 0x13 /* tgt mode completion */
|
|
#define SBIC_CSR_W_ATN 0x14 /* ditto */
|
|
#define SBIC_CSR_XLATED 0x15 /* translate address cmd */
|
|
#define SBIC_CSR_S_XFERRED 0x16 /* initiator mode completion*/
|
|
#define SBIC_CSR_XFERRED 0x18 /* phase in low bits */
|
|
/* Paused or Aborted Interrupts */
|
|
#define SBIC_CSR_MSGIN_W_ACK 0x20 /* (I) msgin, ACK asserted*/
|
|
#define SBIC_CSR_SDP 0x21 /* (I) SDP msg received */
|
|
#define SBIC_CSR_SEL_ABRT 0x22 /* sel/resel aborted */
|
|
#define SBIC_CSR_XFR_PAUSED 0x23 /* (T) no ATN */
|
|
#define SBIC_CSR_XFR_PAUSED_ATN 0x24 /* (T) ATN is asserted */
|
|
#define SBIC_CSR_RSLT_AM 0x27 /* (I) lost selection (AM) */
|
|
#define SBIC_CSR_MIS 0x28 /* (I) xfer aborted, ph mis */
|
|
/* Terminated Interrupts */
|
|
#define SBIC_CSR_CMD_INVALID 0x40
|
|
#define SBIC_CSR_DISC 0x41 /* (I) tgt disconnected */
|
|
#define SBIC_CSR_SEL_TIMEO 0x42
|
|
#define SBIC_CSR_PE 0x43 /* parity error */
|
|
#define SBIC_CSR_PE_ATN 0x44 /* ditto, ATN is asserted */
|
|
#define SBIC_CSR_XLATE_TOOBIG 0x45
|
|
#define SBIC_CSR_RSLT_NOAM 0x46 /* (I) lost sel, no AM mode */
|
|
#define SBIC_CSR_BAD_STATUS 0x47 /* status byte was nok */
|
|
#define SBIC_CSR_MIS_1 0x48 /* ph mis, see low bits */
|
|
/* Service Required Interrupts */
|
|
#define SBIC_CSR_RSLT_NI 0x80 /* reselected, no ify msg */
|
|
#define SBIC_CSR_RSLT_IFY 0x81 /* ditto, AM mode, got ify */
|
|
#define SBIC_CSR_SLT 0x82 /* selected, no ATN */
|
|
#define SBIC_CSR_SLT_ATN 0x83 /* selected with ATN */
|
|
#define SBIC_CSR_ATN 0x84 /* (T) ATN asserted */
|
|
#define SBIC_CSR_DISC_1 0x85 /* (I) bus is free */
|
|
#define SBIC_CSR_UNK_GROUP 0x87 /* strange CDB1 */
|
|
#define SBIC_CSR_MIS_2 0x88 /* (I) ph mis, see low bits */
|
|
|
|
#define SBIC_PHASE(csr) ((csr) & PHASE_MASK)
|
|
|
|
/*
|
|
* Command register (command codes)
|
|
*/
|
|
|
|
#define SBIC_CMD_SBT 0x80 /* Single byte xfer qualifier */
|
|
#define SBIC_CMD_MASK 0x7f
|
|
|
|
/* Miscellaneous */
|
|
#define SBIC_CMD_RESET 0x00 /* (DTI) lev I */
|
|
#define SBIC_CMD_ABORT 0x01 /* (DTI) lev I */
|
|
#define SBIC_CMD_DISC 0x04 /* ( TI) lev I */
|
|
#define SBIC_CMD_SSCC 0x0d /* ( TI) lev I */
|
|
#define SBIC_CMD_SET_IDI 0x0f /* (DTI) lev I */
|
|
#define SBIC_CMD_XLATE 0x18 /* (DT ) lev II */
|
|
|
|
/* Initiator state */
|
|
#define SBIC_CMD_SET_ATN 0x02 /* ( I) lev I */
|
|
#define SBIC_CMD_CLR_ACK 0x03 /* ( I) lev I */
|
|
#define SBIC_CMD_XFER_PAD 0x19 /* ( I) lev II */
|
|
#define SBIC_CMD_XFER_INFO 0x20 /* ( I) lev II */
|
|
|
|
/* Target state */
|
|
#define SBIC_CMD_SND_DISC 0x0e /* ( T ) lev II */
|
|
#define SBIC_CMD_RCV_CMD 0x10 /* ( T ) lev II */
|
|
#define SBIC_CMD_RCV_DATA 0x11 /* ( T ) lev II */
|
|
#define SBIC_CMD_RCV_MSG_OUT 0x12 /* ( T ) lev II */
|
|
#define SBIC_CMD_RCV 0x13 /* ( T ) lev II */
|
|
#define SBIC_CMD_SND_STATUS 0x14 /* ( T ) lev II */
|
|
#define SBIC_CMD_SND_DATA 0x15 /* ( T ) lev II */
|
|
#define SBIC_CMD_SND_MSG_IN 0x16 /* ( T ) lev II */
|
|
#define SBIC_CMD_SND 0x17 /* ( T ) lev II */
|
|
|
|
/* Disconnected state */
|
|
#define SBIC_CMD_RESELECT 0x05 /* (D ) lev II */
|
|
#define SBIC_CMD_SEL_ATN 0x06 /* (D ) lev II */
|
|
#define SBIC_CMD_SEL 0x07 /* (D ) lev II */
|
|
#define SBIC_CMD_SEL_ATN_XFER 0x08 /* (D I) lev II */
|
|
#define SBIC_CMD_SEL_XFER 0x09 /* (D I) lev II */
|
|
#define SBIC_CMD_RESELECT_RECV 0x0a /* (DT ) lev II */
|
|
#define SBIC_CMD_RESELECT_SEND 0x0b /* (DT ) lev II */
|
|
#define SBIC_CMD_WAIT_SEL_RECV 0x0c /* (DT ) lev II */
|
|
|
|
/* approximate, but we won't do SBT on selects */
|
|
#define sbic_isa_select(cmd) (((cmd) > 0x5) && ((cmd) < 0xa))
|
|
|
|
#define SBIC_MACHINE_DMA_MODE SBIC_CTL_DMA
|
|
|
|
typedef struct {
|
|
bus_space_tag_t sc_sbiciot;
|
|
bus_space_handle_t sc_sbicioh;
|
|
} sbic_regmap, *sbic_regmap_p;
|
|
|
|
#define SBIC_ASR 0
|
|
#define SBIC_ADDR 0
|
|
#define SBIC_VAL 1
|
|
|
|
#define sbic_read_reg(regs,regno,val) do { \
|
|
bus_space_write_1((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
(regno)); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE | BUS_SPACE_BARRIER_READ); \
|
|
(val) = bus_space_read_1((regs)->sc_sbiciot, (regs)->sc_sbicioh, \
|
|
SBIC_VAL); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_READ); \
|
|
} while (0)
|
|
|
|
#define sbic_write_reg(regs,regno,val) do { \
|
|
bus_space_write_1((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
(regno)); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE); \
|
|
bus_space_write_1((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_VAL, \
|
|
(val)); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE); \
|
|
} while (0)
|
|
|
|
#define SET_SBIC_myid(regs,val) sbic_write_reg(regs,SBIC_myid,val)
|
|
#define GET_SBIC_myid(regs,val) sbic_read_reg(regs,SBIC_myid,val)
|
|
#define SET_SBIC_cdbsize(regs,val) sbic_write_reg(regs,SBIC_cdbsize,val)
|
|
#define GET_SBIC_cdbsize(regs,val) sbic_read_reg(regs,SBIC_cdbsize,val)
|
|
#define SET_SBIC_control(regs,val) sbic_write_reg(regs,SBIC_control,val)
|
|
#define GET_SBIC_control(regs,val) sbic_read_reg(regs,SBIC_control,val)
|
|
#define SET_SBIC_timeo(regs,val) sbic_write_reg(regs,SBIC_timeo,val)
|
|
#define GET_SBIC_timeo(regs,val) sbic_read_reg(regs,SBIC_timeo,val)
|
|
#define SET_SBIC_cdb1(regs,val) sbic_write_reg(regs,SBIC_cdb1,val)
|
|
#define GET_SBIC_cdb1(regs,val) sbic_read_reg(regs,SBIC_cdb1,val)
|
|
#define SET_SBIC_cdb2(regs,val) sbic_write_reg(regs,SBIC_cdb2,val)
|
|
#define GET_SBIC_cdb2(regs,val) sbic_read_reg(regs,SBIC_cdb2,val)
|
|
#define SET_SBIC_cdb3(regs,val) sbic_write_reg(regs,SBIC_cdb3,val)
|
|
#define GET_SBIC_cdb3(regs,val) sbic_read_reg(regs,SBIC_cdb3,val)
|
|
#define SET_SBIC_cdb4(regs,val) sbic_write_reg(regs,SBIC_cdb4,val)
|
|
#define GET_SBIC_cdb4(regs,val) sbic_read_reg(regs,SBIC_cdb4,val)
|
|
#define SET_SBIC_cdb5(regs,val) sbic_write_reg(regs,SBIC_cdb5,val)
|
|
#define GET_SBIC_cdb5(regs,val) sbic_read_reg(regs,SBIC_cdb5,val)
|
|
#define SET_SBIC_cdb6(regs,val) sbic_write_reg(regs,SBIC_cdb6,val)
|
|
#define GET_SBIC_cdb6(regs,val) sbic_read_reg(regs,SBIC_cdb6,val)
|
|
#define SET_SBIC_cdb7(regs,val) sbic_write_reg(regs,SBIC_cdb7,val)
|
|
#define GET_SBIC_cdb7(regs,val) sbic_read_reg(regs,SBIC_cdb7,val)
|
|
#define SET_SBIC_cdb8(regs,val) sbic_write_reg(regs,SBIC_cdb8,val)
|
|
#define GET_SBIC_cdb8(regs,val) sbic_read_reg(regs,SBIC_cdb8,val)
|
|
#define SET_SBIC_cdb9(regs,val) sbic_write_reg(regs,SBIC_cdb9,val)
|
|
#define GET_SBIC_cdb9(regs,val) sbic_read_reg(regs,SBIC_cdb9,val)
|
|
#define SET_SBIC_cdb10(regs,val) sbic_write_reg(regs,SBIC_cdb10,val)
|
|
#define GET_SBIC_cdb10(regs,val) sbic_read_reg(regs,SBIC_cdb10,val)
|
|
#define SET_SBIC_cdb11(regs,val) sbic_write_reg(regs,SBIC_cdb11,val)
|
|
#define GET_SBIC_cdb11(regs,val) sbic_read_reg(regs,SBIC_cdb11,val)
|
|
#define SET_SBIC_cdb12(regs,val) sbic_write_reg(regs,SBIC_cdb12,val)
|
|
#define GET_SBIC_cdb12(regs,val) sbic_read_reg(regs,SBIC_cdb12,val)
|
|
#define SET_SBIC_tlun(regs,val) sbic_write_reg(regs,SBIC_tlun,val)
|
|
#define GET_SBIC_tlun(regs,val) sbic_read_reg(regs,SBIC_tlun,val)
|
|
#define SET_SBIC_cmd_phase(regs,val) sbic_write_reg(regs,SBIC_cmd_phase,val)
|
|
#define GET_SBIC_cmd_phase(regs,val) sbic_read_reg(regs,SBIC_cmd_phase,val)
|
|
#define SET_SBIC_syn(regs,val) sbic_write_reg(regs,SBIC_syn,val)
|
|
#define GET_SBIC_syn(regs,val) sbic_read_reg(regs,SBIC_syn,val)
|
|
#define SET_SBIC_count_hi(regs,val) sbic_write_reg(regs,SBIC_count_hi,val)
|
|
#define GET_SBIC_count_hi(regs,val) sbic_read_reg(regs,SBIC_count_hi,val)
|
|
#define SET_SBIC_count_med(regs,val) sbic_write_reg(regs,SBIC_count_med,val)
|
|
#define GET_SBIC_count_med(regs,val) sbic_read_reg(regs,SBIC_count_med,val)
|
|
#define SET_SBIC_count_lo(regs,val) sbic_write_reg(regs,SBIC_count_lo,val)
|
|
#define GET_SBIC_count_lo(regs,val) sbic_read_reg(regs,SBIC_count_lo,val)
|
|
#define SET_SBIC_selid(regs,val) sbic_write_reg(regs,SBIC_selid,val)
|
|
#define GET_SBIC_selid(regs,val) sbic_read_reg(regs,SBIC_selid,val)
|
|
#define SET_SBIC_rselid(regs,val) sbic_write_reg(regs,SBIC_rselid,val)
|
|
#define GET_SBIC_rselid(regs,val) sbic_read_reg(regs,SBIC_rselid,val)
|
|
#define SET_SBIC_csr(regs,val) sbic_write_reg(regs,SBIC_csr,val)
|
|
#define GET_SBIC_csr(regs,val) sbic_read_reg(regs,SBIC_csr,val)
|
|
#define SET_SBIC_cmd(regs,val) sbic_write_reg(regs,SBIC_cmd,val)
|
|
#define GET_SBIC_cmd(regs,val) sbic_read_reg(regs,SBIC_cmd,val)
|
|
#define SET_SBIC_data(regs,val) sbic_write_reg(regs,SBIC_data,val)
|
|
#define GET_SBIC_data(regs,val) sbic_read_reg(regs,SBIC_data,val)
|
|
|
|
#define SBIC_TC_PUT(regs,val) do { \
|
|
sbic_write_reg(regs,SBIC_count_hi,((val)>>16)); \
|
|
bus_space_write_1(regs->sc_sbiciot, regs->sc_sbicioh, SBIC_VAL, \
|
|
(val) >> 8); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_VAL, \
|
|
1, BUS_SPACE_BARRIER_WRITE); \
|
|
bus_space_write_1(regs->sc_sbiciot, regs->sc_sbicioh, SBIC_VAL, \
|
|
(val)); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE); \
|
|
} while (0)
|
|
|
|
#define SBIC_TC_GET(regs,val) do { \
|
|
sbic_read_reg(regs,SBIC_count_hi,(val)); \
|
|
(val) = ((val)<<8) | bus_space_read_1(regs->sc_sbiciot, \
|
|
regs->sc_sbicioh, SBIC_VAL); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_VAL, \
|
|
1, BUS_SPACE_BARRIER_READ); \
|
|
(val) = ((val)<<8) | bus_space_read_1(regs->sc_sbiciot, \
|
|
regs->sc_sbicioh, SBIC_VAL); \
|
|
} while (0)
|
|
|
|
#define SBIC_LOAD_COMMAND(regs,cmd,cmdsize) do { \
|
|
bus_space_write_1(regs->sc_sbiciot, regs->sc_sbicioh, SBIC_ADDR, \
|
|
SBIC_cdb1); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE); \
|
|
bus_space_write_multi_1(regs->sc_sbiciot, regs->sbic_ioh, SBIC_VAL, \
|
|
(char *)(cmd), cmdsize); \
|
|
bus_space_barrier((regs)->sc_sbiciot, (regs)->sc_sbicioh, SBIC_ADDR, \
|
|
2, BUS_SPACE_BARRIER_WRITE); \
|
|
} while (0)
|
|
|
|
#define GET_SBIC_asr(regs,val) \
|
|
(val) = bus_space_read_1((regs)->sc_sbiciot, (regs)->sc_sbicioh, \
|
|
SBIC_ASR)
|
|
|
|
#define WAIT_CIP(regs) do { \
|
|
while (bus_space_read_1(regs->sc_sbiciot, regs->sc_sbicioh, SBIC_ASR) \
|
|
& SBIC_ASR_CIP) \
|
|
; \
|
|
} while (0)
|
|
|
|
/* transmit a byte in programmed I/O mode */
|
|
#define SEND_BYTE(regs, ch) do { \
|
|
WAIT_CIP(regs); \
|
|
SET_SBIC_cmd(regs, SBIC_CMD_SBT | SBIC_CMD_XFER_INFO); \
|
|
SBIC_WAIT(regs, SBIC_ASR_DBR, 0); \
|
|
SET_SBIC_data(regs, ch); \
|
|
} while (0)
|
|
|
|
/* receive a byte in programmed I/O mode */
|
|
#define RECV_BYTE(regs, ch) do { \
|
|
WAIT_CIP(regs); \
|
|
SET_SBIC_cmd(regs, SBIC_CMD_SBT | SBIC_CMD_XFER_INFO); \
|
|
SBIC_WAIT(regs, SBIC_ASR_DBR, 0); \
|
|
GET_SBIC_data(regs, ch); \
|
|
} while (0)
|