NetBSD/sys/arch/mipsco/obio/asc.c

555 lines
15 KiB
C

/* $NetBSD: asc.c,v 1.10 2001/12/15 11:11:49 wdk Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Wayne Knowles
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/malloc.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <machine/cpu.h>
#include <machine/autoconf.h>
#include <machine/mainboard.h>
#include <machine/bus.h>
#include <mipsco/obio/rambo.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
struct asc_softc {
struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
struct evcnt sc_intrcnt; /* Interrupt counter */
bus_space_tag_t sc_bst;
bus_space_handle_t sc_bsh; /* NCR 53c94 registers */
bus_space_handle_t dm_bsh; /* RAMBO registers */
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmamap;
caddr_t *sc_dmaaddr;
size_t *sc_dmalen;
size_t sc_dmasize;
int sc_flags;
#define DMA_IDLE 0x0
#define DMA_PULLUP 0x1
#define DMA_ACTIVE 0x2
#define DMA_MAPLOADED 0x4
u_int32_t dm_mode;
int dm_curseg;
};
static int ascmatch (struct device *, struct cfdata *, void *);
static void ascattach (struct device *, struct device *, void *);
struct cfattach asc_ca = {
sizeof(struct asc_softc), ascmatch, ascattach
};
/*
* Functions and the switch for the MI code.
*/
static u_char asc_read_reg (struct ncr53c9x_softc *, int);
static void asc_write_reg (struct ncr53c9x_softc *, int, u_char);
static int asc_dma_isintr (struct ncr53c9x_softc *);
static void asc_dma_reset (struct ncr53c9x_softc *);
static int asc_dma_intr (struct ncr53c9x_softc *);
static int asc_dma_setup (struct ncr53c9x_softc *, caddr_t *,
size_t *, int, size_t *);
static void asc_dma_go (struct ncr53c9x_softc *);
static void asc_dma_stop (struct ncr53c9x_softc *);
static int asc_dma_isactive (struct ncr53c9x_softc *);
static struct ncr53c9x_glue asc_glue = {
asc_read_reg,
asc_write_reg,
asc_dma_isintr,
asc_dma_reset,
asc_dma_intr,
asc_dma_setup,
asc_dma_go,
asc_dma_stop,
asc_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
static int asc_intr (void *);
#define MAX_SCSI_XFER (64*1024)
#define MAX_DMA_SZ MAX_SCSI_XFER
#define DMA_SEGS (MAX_DMA_SZ/NBPG)
static int
ascmatch(struct device *parent, struct cfdata *cf, void *aux)
{
return 1;
}
static void
ascattach(struct device *parent, struct device *self, void *aux)
{
struct confargs *ca = aux;
struct asc_softc *esc = (void *)self;
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
/*
* Set up glue for MI code early; we use some of it here.
*/
sc->sc_glue = &asc_glue;
esc->sc_bst = ca->ca_bustag;
esc->sc_dmat = ca->ca_dmatag;
if (bus_space_map(ca->ca_bustag, ca->ca_addr,
16*4, /* sizeof (ncr53c9xreg) */
BUS_SPACE_MAP_LINEAR,
&esc->sc_bsh) != 0) {
printf(": cannot map registers\n");
return;
}
if (bus_space_map(ca->ca_bustag, RAMBO_BASE, sizeof(struct rambo_ch),
BUS_SPACE_MAP_LINEAR,
&esc->dm_bsh) != 0) {
printf(": cannot map dma registers\n");
return;
}
if (bus_dmamap_create(esc->sc_dmat, MAX_DMA_SZ,
DMA_SEGS, MAX_DMA_SZ, RB_BOUNDRY,
BUS_DMA_WAITOK,
&esc->sc_dmamap) != 0) {
printf(": failed to create dmamap\n");
return;
}
evcnt_attach_dynamic(&esc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
self->dv_xname, "intr");
esc->sc_flags = DMA_IDLE;
asc_dma_reset(sc);
/* Other settings */
sc->sc_id = 7;
sc->sc_freq = 24; /* 24 MHz clock */
/*
* Setup for genuine NCR 53C94 SCSI Controller
*/
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE;
sc->sc_cfg3 = NCRCFG3_CDB | NCRCFG3_QTE | NCRCFG3_FSCSI;
sc->sc_rev = NCR_VARIANT_NCR53C94;
sc->sc_minsync = (1000 / sc->sc_freq) * 5 / 4;
sc->sc_maxxfer = MAX_SCSI_XFER;
#ifdef OLDNCR
if (!NCR_READ_REG(sc, NCR_CFG3)) {
printf(" [old revision]");
sc->sc_cfg2 = 0;
sc->sc_cfg3 = 0;
sc->sc_minsync = 0;
}
#endif
sc->sc_adapter.adapt_minphys = minphys;
sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request;
ncr53c9x_attach(sc);
bus_intr_establish(esc->sc_bst, SYS_INTR_SCSI, 0, 0, asc_intr, esc);
}
/*
* Glue functions.
*/
static u_char
asc_read_reg(struct ncr53c9x_softc *sc, int reg)
{
struct asc_softc *esc = (struct asc_softc *)sc;
return bus_space_read_1(esc->sc_bst, esc->sc_bsh, reg * 4 + 3);
}
static void
asc_write_reg(struct ncr53c9x_softc *sc, int reg, u_char val)
{
struct asc_softc *esc = (struct asc_softc *)sc;
bus_space_write_1(esc->sc_bst, esc->sc_bsh, reg * 4 + 3, val);
}
static void
dma_status(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
int count;
int stat;
void *addr;
u_int32_t tc;
tc = (asc_read_reg(sc, NCR_TCM)<<8) + asc_read_reg(sc, NCR_TCL);
count = bus_space_read_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT);
stat = bus_space_read_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE);
addr = (void *)
bus_space_read_4(esc->sc_bst, esc->dm_bsh, RAMBO_CADDR);
printf("rambo status: cnt=%x addr=%p stat=%08x tc=%04x "
"ncr_stat=0x%02x ncr_fifo=0x%02x\n",
count, addr, stat, tc,
asc_read_reg(sc, NCR_STAT),
asc_read_reg(sc, NCR_FFLAG));
}
static __inline void
check_fifo(struct asc_softc *esc)
{
register int i=100;
while (i && !(bus_space_read_4(esc->sc_bst, esc->dm_bsh,
RAMBO_MODE) & RB_FIFO_EMPTY)) {
DELAY(1); i--;
}
if (!i) {
dma_status((void *)esc);
panic("fifo didn't flush");
}
}
static int
asc_dma_isintr(struct ncr53c9x_softc *sc)
{
return NCR_READ_REG(sc, NCR_STAT) & NCRSTAT_INT;
}
static void
asc_dma_reset(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
bus_space_write_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT, 0);
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE,
RB_CLRFIFO|RB_CLRERROR);
DELAY(10);
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE, 0);
if (esc->sc_flags & DMA_MAPLOADED)
bus_dmamap_unload(esc->sc_dmat, esc->sc_dmamap);
esc->sc_flags = DMA_IDLE;
}
/*
* Setup a DMA transfer
*/
static int
asc_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr, size_t *len,
int datain, size_t *dmasize)
{
struct asc_softc *esc = (struct asc_softc *)sc;
paddr_t paddr;
size_t count, blocks;
int prime, err;
#ifdef DIAGNOSTIC
if (esc->sc_flags & DMA_ACTIVE) {
dma_status(sc);
panic("DMA active");
}
#endif
esc->sc_dmaaddr = addr;
esc->sc_dmalen = len;
esc->sc_dmasize = *dmasize;
esc->sc_flags = datain ? DMA_PULLUP : 0;
NCR_DMA(("asc_dma_setup va=%p len=%d datain=%d count=%d\n",
*addr, *len, datain, esc->sc_dmasize));
if (esc->sc_dmasize == 0)
return 0;
/* have dmamap for the transfering addresses */
if ((err=bus_dmamap_load(esc->sc_dmat, esc->sc_dmamap,
*esc->sc_dmaaddr, esc->sc_dmasize,
NULL /* kernel address */,
BUS_DMA_NOWAIT)) != 0)
panic("%s: bus_dmamap_load err=%d", sc->sc_dev.dv_xname, err);
esc->sc_flags |= DMA_MAPLOADED;
paddr = esc->sc_dmamap->dm_segs[0].ds_addr;
count = esc->sc_dmamap->dm_segs[0].ds_len;
prime = (u_int32_t)paddr & 0x3f;
blocks = (prime + count + 63) >> 6;
esc->dm_mode = (datain ? RB_DMA_WR : RB_DMA_RD);
/* Set transfer direction and disable DMA */
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE, esc->dm_mode);
/* Load DMA transfer address */
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_LADDR,
paddr & ~0x3f);
/* Load number of blocks to DMA (1 block = 64 bytes) */
bus_space_write_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT, blocks);
/* If non block-aligned transfer prime FIFO manually */
if (prime) {
/* Enable DMA to prime the FIFO buffer */
bus_space_write_4(esc->sc_bst, esc->dm_bsh,
RAMBO_MODE, esc->dm_mode | RB_DMA_ENABLE);
if (esc->sc_flags & DMA_PULLUP) {
/* Read from NCR 53c94 controller*/
u_int16_t *p;
p = (u_int16_t *)((u_int32_t)*esc->sc_dmaaddr & ~0x3f);
bus_space_write_multi_2(esc->sc_bst, esc->dm_bsh,
RAMBO_FIFO, p, prime>>1);
} else
/* Write to NCR 53C94 controller */
while (prime > 0) {
(void)bus_space_read_2(esc->sc_bst,
esc->dm_bsh,
RAMBO_FIFO);
prime -= 2;
}
/* Leave DMA disabled while we setup NCR controller */
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE,
esc->dm_mode);
}
bus_dmamap_sync(esc->sc_dmat, esc->sc_dmamap, 0, esc->sc_dmasize,
datain ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
esc->dm_curseg = 0;
esc->dm_mode |= RB_DMA_ENABLE;
if (esc->sc_dmamap->dm_nsegs > 1)
esc->dm_mode |= RB_INT_ENABLE; /* Requires DMA chaining */
return 0;
}
static void
asc_dma_go(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
/* Start DMA */
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE, esc->dm_mode);
esc->sc_flags |= DMA_ACTIVE;
}
static int
asc_dma_intr(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
size_t resid, len;
int trans;
u_int32_t status;
u_int tcl, tcm;
#ifdef DIAGNOSTIC
if (!(esc->sc_flags & DMA_ACTIVE)) {
dma_status(sc);
panic("DMA not active");
}
#endif
resid = 0;
if (!(esc->sc_flags & DMA_PULLUP) &&
(resid = (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
NCR_DMA(("asc_intr: empty FIFO of %d ", resid));
DELAY(10);
}
resid += (tcl = NCR_READ_REG(sc, NCR_TCL)) +
((tcm = NCR_READ_REG(sc, NCR_TCM)) << 8);
if (esc->sc_dmasize == 0) { /* Transfer pad operation */
NCR_DMA(("asc_intr: discard %d bytes\n", resid));
return 0;
}
trans = esc->sc_dmasize - resid;
if (trans < 0) { /* transferred < 0 ? */
printf("asc_intr: xfer (%d) > req (%d)\n",
trans, esc->sc_dmasize);
trans = esc->sc_dmasize;
}
NCR_DMA(("asc_intr: tcl=%d, tcm=%d; trans=%d, resid=%d\n",
tcl, tcm, trans, resid));
status = bus_space_read_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE);
if (!(status & RB_FIFO_EMPTY)) { /* Data left in RAMBO FIFO */
if (esc->sc_flags & DMA_PULLUP) { /* SCSI Read */
paddr_t ptr;
u_int16_t *p;
resid = status & 0x1f;
/* take the address of block to fixed up */
ptr = bus_space_read_4(esc->sc_bst, esc->dm_bsh,
RAMBO_CADDR);
/* find the starting address of fractional data */
p = (u_int16_t *)MIPS_PHYS_TO_KSEG0(ptr+(resid<<1));
/* duplicate trailing data to FIFO for force flush */
len = RB_BLK_CNT - resid;
bus_space_write_multi_2(esc->sc_bst, esc->dm_bsh,
RAMBO_FIFO, p, len);
check_fifo(esc);
} else { /* SCSI Write */
bus_space_write_4(esc->sc_bst, esc->dm_bsh,
RAMBO_MODE, 0);
bus_space_write_4(esc->sc_bst, esc->dm_bsh,
RAMBO_MODE, RB_CLRFIFO);
}
}
bus_space_write_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT, 0);
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE, 0);
bus_dmamap_sync(esc->sc_dmat, esc->sc_dmamap,
0, esc->sc_dmasize,
(esc->sc_flags & DMA_PULLUP)
? BUS_DMASYNC_POSTREAD
: BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(esc->sc_dmat, esc->sc_dmamap);
*esc->sc_dmaaddr += trans;
*esc->sc_dmalen -= trans;
esc->sc_flags = DMA_IDLE;
return 0;
}
static void
asc_dma_stop(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE, 0);
if (esc->sc_flags & DMA_MAPLOADED)
bus_dmamap_unload(esc->sc_dmat, esc->sc_dmamap);
esc->sc_flags = DMA_IDLE;
}
static int
asc_dma_isactive(struct ncr53c9x_softc *sc)
{
struct asc_softc *esc = (struct asc_softc *)sc;
return (esc->sc_flags & DMA_ACTIVE)? 1 : 0;
}
static void
rambo_dma_chain(struct asc_softc *esc)
{
int seg;
size_t count, blocks;
paddr_t paddr;
seg = ++esc->dm_curseg;
#ifdef DIAGNOSTIC
if (!(esc->sc_flags & DMA_ACTIVE) || seg > esc->sc_dmamap->dm_nsegs)
panic("Unexpected DMA chaining intr");
/* Interrupt can only occur at terminal count, but double check */
if (bus_space_read_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT)) {
dma_status((void *)esc);
panic("rambo blkcnt != 0");
}
#endif
paddr = esc->sc_dmamap->dm_segs[seg].ds_addr;
count = esc->sc_dmamap->dm_segs[seg].ds_len;
blocks = (count + 63) >> 6;
/* Disable DMA interrupt if last segment */
if (seg+1 > esc->sc_dmamap->dm_nsegs) {
bus_space_write_4(esc->sc_bst, esc->dm_bsh,
RAMBO_MODE, esc->dm_mode & ~RB_INT_ENABLE);
}
/* Load transfer address for next DMA chain */
bus_space_write_4(esc->sc_bst, esc->dm_bsh, RAMBO_LADDR, paddr);
/* DMA restarts when we enter a new block count */
bus_space_write_2(esc->sc_bst, esc->dm_bsh, RAMBO_BLKCNT, blocks);
}
static int
asc_intr(void *arg)
{
register u_int32_t dma_stat;
struct asc_softc *esc = arg;
struct ncr53c9x_softc *sc = arg;
esc->sc_intrcnt.ev_count++;
/* Check for RAMBO DMA Interrupt */
dma_stat = bus_space_read_4(esc->sc_bst, esc->dm_bsh, RAMBO_MODE);
if (dma_stat & RB_INTR_PEND) {
rambo_dma_chain(esc);
}
/* Check for NCR 53c94 interrupt */
if (NCR_READ_REG(sc, NCR_STAT) & NCRSTAT_INT) {
ncr53c9x_intr(sc);
}
return 0;
}