149 lines
5.5 KiB
C
149 lines
5.5 KiB
C
/*-
|
|
* Copyright (c) 2002-2004 Sam Leffler, Errno Consulting, Atheros
|
|
* Communications, Inc. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms are permitted
|
|
* provided that the following conditions are met:
|
|
* 1. The materials contained herein are unmodified and are used
|
|
* unmodified.
|
|
* 2. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following NO
|
|
* ''WARRANTY'' disclaimer below (''Disclaimer''), without
|
|
* modification.
|
|
* 3. Redistributions in binary form must reproduce at minimum a
|
|
* disclaimer similar to the Disclaimer below and any redistribution
|
|
* must be conditioned upon including a substantially similar
|
|
* Disclaimer requirement for further binary redistribution.
|
|
* 4. Neither the names of the above-listed copyright holders nor the
|
|
* names of any contributors may be used to endorse or promote
|
|
* product derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT,
|
|
* MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
|
|
* FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGES.
|
|
*
|
|
* $Id: ah_osdep.h,v 1.4 2007/01/14 01:05:49 cube Exp $
|
|
*/
|
|
#ifndef _ATH_AH_OSDEP_H_
|
|
#define _ATH_AH_OSDEP_H_
|
|
/*
|
|
* Atheros Hardware Access Layer (HAL) OS Dependent Definitions.
|
|
*/
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/endian.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include "athhal_options.h"
|
|
|
|
/*
|
|
* Delay n microseconds.
|
|
*/
|
|
extern void ath_hal_delay(int);
|
|
#define OS_DELAY(_n) ath_hal_delay(_n)
|
|
|
|
#define OS_INLINE __inline
|
|
#define OS_MEMZERO(_a, _n) ath_hal_memzero((_a), (_n))
|
|
extern void ath_hal_memzero(void *, size_t);
|
|
#define OS_MEMCPY(_d, _s, _n) ath_hal_memcpy(_d,_s,_n)
|
|
extern void *ath_hal_memcpy(void *, const void *, size_t);
|
|
|
|
#define abs(_a) __builtin_abs(_a)
|
|
|
|
struct ath_hal;
|
|
extern u_int32_t ath_hal_getuptime(struct ath_hal *);
|
|
#define OS_GETUPTIME(_ah) ath_hal_getuptime(_ah)
|
|
|
|
/*
|
|
* WiSoC boards overload the bus tag with information about the
|
|
* board layout. We must extract the bus space tag from that
|
|
* indirect structure. For everyone else the tag is passed in
|
|
* directly.
|
|
* XXX cache indirect ref privately
|
|
*/
|
|
#ifdef AH_SUPPORT_AR5312
|
|
#define BUSTAG(ah) \
|
|
((bus_space_tag_t) ((struct ar531x_config *)((ah)->ah_st))->tag)
|
|
#define BUSHANDLE(ah) ((bus_space_handle_t)((ah)->ah_sh))
|
|
|
|
#elif defined(AH_REGOPS_FUNC)
|
|
#define BUSTAG(ah) (*(bus_space_tag_t *) (ah)->ah_st)
|
|
#define BUSHANDLE(ah) (*(bus_space_handle_t *)((ah)->ah_sh))
|
|
#define HALTAG(t) (HAL_BUS_TAG) &(t)
|
|
#define HALHANDLE(h) (HAL_BUS_HANDLE) &(h)
|
|
#else
|
|
#define BUSTAG(ah) ((bus_space_tag_t) (ah)->ah_st)
|
|
#define BUSHANDLE(ah) ((bus_space_handle_t) ((ah)->ah_sh))
|
|
#define HALTAG(t) (NULL)
|
|
#define HALHANDLE(h) (HAL_BUS_HANDLE) (h)
|
|
#endif
|
|
|
|
/*
|
|
* Register read/write; we assume the registers will always
|
|
* be memory-mapped. Note that register accesses are done
|
|
* using target-specific functions when debugging is enabled
|
|
* (ATHHAL_DEBUG) or we are explicitly configured this way. The
|
|
* latter is used on some platforms where the full i/o space
|
|
* cannot be directly mapped.
|
|
*/
|
|
#if defined(ATHHAL_DEBUG) || defined(AH_REGOPS_FUNC) || defined(ATHHAL_DEBUG_ALQ)
|
|
#define OS_REG_WRITE(_ah, _reg, _val) ath_hal_reg_write(_ah, _reg, _val)
|
|
#define OS_REG_READ(_ah, _reg) ath_hal_reg_read(_ah, _reg)
|
|
|
|
extern void ath_hal_reg_write(struct ath_hal *ah, u_int reg, u_int32_t val);
|
|
extern u_int32_t ath_hal_reg_read(struct ath_hal *ah, u_int reg);
|
|
#else
|
|
/*
|
|
* The hardware registers are native little-endian byte order.
|
|
* Big-endian hosts are handled by enabling hardware byte-swap
|
|
* of register reads and writes at reset. But the PCI clock
|
|
* domain registers are not byte swapped! Thus, on big-endian
|
|
* platforms we have to byte-swap thoese registers specifically.
|
|
* Most of this code is collapsed at compile time because the
|
|
* register values are constants.
|
|
*/
|
|
#define AH_LITTLE_ENDIAN 1234
|
|
#define AH_BIG_ENDIAN 4321
|
|
|
|
#if _BYTE_ORDER == _BIG_ENDIAN
|
|
#define OS_REG_WRITE(_ah, _reg, _val) do { \
|
|
if ( (_reg) >= 0x4000 && (_reg) < 0x5000) \
|
|
bus_space_write_4((_ah)->ah_st, (_ah)->ah_sh, \
|
|
(_reg), (_val)); \
|
|
else \
|
|
bus_space_write_stream_4((_ah)->ah_st, (_ah)->ah_sh, \
|
|
(_reg), (_val)); \
|
|
} while (0)
|
|
#define OS_REG_READ(_ah, _reg) \
|
|
(((_reg) >= 0x4000 && (_reg) < 0x5000) ? \
|
|
bus_space_read_4((_ah)->ah_st, (_ah)->ah_sh, \
|
|
(_reg))) : \
|
|
bus_space_read_stream_4((_ah)->ah_st, (_ah)->ah_sh, (_reg)))
|
|
#else /* _BYTE_ORDER == _LITTLE_ENDIAN */
|
|
#define OS_REG_WRITE(_ah, _reg, _val) \
|
|
bus_space_write_4((_ah)->ah_st, (_ah)->ah_sh, (_reg), (_val))
|
|
#define OS_REG_READ(_ah, _reg) \
|
|
((u_int32_t) bus_space_read_4((_ah)->ah_st, (_ah)->ah_sh, (_reg)))
|
|
#endif /* _BYTE_ORDER */
|
|
#endif /* ATHHAL_DEBUG || AH_REGFUNC || ATHHAL_DEBUG_ALQ */
|
|
|
|
#ifdef ATHHAL_DEBUG_ALQ
|
|
extern void OS_MARK(struct ath_hal *, u_int id, u_int32_t value);
|
|
#else
|
|
#define OS_MARK(_ah, _id, _v)
|
|
#endif
|
|
|
|
#endif /* _ATH_AH_OSDEP_H_ */
|