1606 lines
34 KiB
C
1606 lines
34 KiB
C
/* $NetBSD: scif.c,v 1.7 2000/02/22 01:37:11 msaitoh Exp $ */
|
|
|
|
/*-
|
|
* Copyright (C) 1999 T.Horiuchi and SAITOH Masanobu. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Charles M. Hannum.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)com.c 7.5 (Berkeley) 5/16/91
|
|
*/
|
|
|
|
/*
|
|
* SH internal serial driver
|
|
*
|
|
* This code is derived from both z8530tty.c and com.c
|
|
*/
|
|
|
|
#include "opt_pclock.h"
|
|
#include "opt_scif.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/file.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <dev/cons.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <sh3/scifreg.h>
|
|
#include <sh3/tmureg.h>
|
|
|
|
#include <machine/shbvar.h>
|
|
|
|
static void scifstart __P((struct tty *));
|
|
static int scifparam __P((struct tty *, struct termios *));
|
|
|
|
void scifcnprobe __P((struct consdev *));
|
|
void scifcninit __P((struct consdev *));
|
|
void scifcnputc __P((dev_t, int));
|
|
int scifcngetc __P((dev_t));
|
|
void scifcnpoolc __P((dev_t, int));
|
|
void scif_intr_init __P((void));
|
|
int scifintr __P((void *));
|
|
|
|
struct scif_softc {
|
|
struct device sc_dev; /* boilerplate */
|
|
struct tty *sc_tty;
|
|
void *sc_ih;
|
|
|
|
#if 0
|
|
bus_space_tag_t sc_iot; /* ISA i/o space identifier */
|
|
bus_space_handle_t sc_ioh; /* ISA io handle */
|
|
|
|
int sc_drq;
|
|
|
|
int sc_frequency;
|
|
#endif
|
|
|
|
u_int sc_overflows,
|
|
sc_floods,
|
|
sc_errors; /* number of retries so far */
|
|
u_char sc_status[7]; /* copy of registers */
|
|
|
|
int sc_hwflags;
|
|
int sc_swflags;
|
|
u_int sc_fifolen;
|
|
|
|
u_int sc_r_hiwat,
|
|
sc_r_lowat;
|
|
u_char *volatile sc_rbget,
|
|
*volatile sc_rbput;
|
|
volatile u_int sc_rbavail;
|
|
u_char *sc_rbuf,
|
|
*sc_ebuf;
|
|
|
|
u_char *sc_tba; /* transmit buffer address */
|
|
u_int sc_tbc, /* transmit byte count */
|
|
sc_heldtbc;
|
|
|
|
volatile u_char sc_rx_flags,
|
|
#define RX_TTY_BLOCKED 0x01
|
|
#define RX_TTY_OVERFLOWED 0x02
|
|
#define RX_IBUF_BLOCKED 0x04
|
|
#define RX_IBUF_OVERFLOWED 0x08
|
|
#define RX_ANY_BLOCK 0x0f
|
|
sc_tx_busy, /* working on an output chunk */
|
|
sc_tx_done, /* done with one output chunk */
|
|
sc_tx_stopped, /* H/W level stop (lost CTS) */
|
|
sc_st_check, /* got a status interrupt */
|
|
sc_rx_ready;
|
|
|
|
volatile u_char sc_heldchange;
|
|
};
|
|
|
|
/* controller driver configuration */
|
|
static int scif_match __P((struct device *, struct cfdata *, void *));
|
|
static void scif_attach __P((struct device *, struct device *, void *));
|
|
|
|
void scif_break __P((struct scif_softc *, int));
|
|
void scif_iflush __P((struct scif_softc *));
|
|
|
|
#define integrate static inline
|
|
#ifdef __GENERIC_SOFT_INTERRUPTS
|
|
void scifsoft __P((void *));
|
|
#else
|
|
#ifndef __NO_SOFT_SERIAL_INTERRUPT
|
|
void scifsoft __P((void));
|
|
#else
|
|
void scifsoft __P((void *));
|
|
#endif
|
|
#endif
|
|
integrate void scif_rxsoft __P((struct scif_softc *, struct tty *));
|
|
integrate void scif_txsoft __P((struct scif_softc *, struct tty *));
|
|
integrate void scif_stsoft __P((struct scif_softc *, struct tty *));
|
|
integrate void scif_schedrx __P((struct scif_softc *));
|
|
void scifdiag __P((void *));
|
|
|
|
|
|
#define SCIFUNIT_MASK 0x7ffff
|
|
#define SCIFDIALOUT_MASK 0x80000
|
|
|
|
#define SCIFUNIT(x) (minor(x) & SCIFUNIT_MASK)
|
|
#define SCIFDIALOUT(x) (minor(x) & SCIFDIALOUT_MASK)
|
|
|
|
/* Macros to clear/set/test flags. */
|
|
#define SET(t, f) (t) |= (f)
|
|
#define CLR(t, f) (t) &= ~(f)
|
|
#define ISSET(t, f) ((t) & (f))
|
|
|
|
/* Hardware flag masks */
|
|
#define SCIF_HW_NOIEN 0x01
|
|
#define SCIF_HW_FIFO 0x02
|
|
#define SCIF_HW_FLOW 0x08
|
|
#define SCIF_HW_DEV_OK 0x20
|
|
#define SCIF_HW_CONSOLE 0x40
|
|
#define SCIF_HW_KGDB 0x80
|
|
|
|
/* Buffer size for character buffer */
|
|
#define SCIF_RING_SIZE 2048
|
|
|
|
/* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */
|
|
u_int scif_rbuf_hiwat = (SCIF_RING_SIZE * 1) / 4;
|
|
u_int scif_rbuf_lowat = (SCIF_RING_SIZE * 3) / 4;
|
|
|
|
#define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */
|
|
int scifconscflag = CONMODE;
|
|
|
|
#ifdef SCIFCN_SPEED
|
|
unsigned int scifcn_speed = SCIFCN_SPEED;
|
|
#else
|
|
unsigned int scifcn_speed = 9600;
|
|
#endif
|
|
|
|
#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */
|
|
|
|
#ifndef __GENERIC_SOFT_INTERRUPTS
|
|
#ifdef __NO_SOFT_SERIAL_INTERRUPT
|
|
volatile int scif_softintr_scheduled;
|
|
#endif
|
|
#endif
|
|
|
|
u_int scif_rbuf_size = SCIF_RING_SIZE;
|
|
|
|
struct cfattach scif_ca = {
|
|
sizeof(struct scif_softc), scif_match, scif_attach
|
|
};
|
|
|
|
extern struct cfdriver scif_cd;
|
|
|
|
cdev_decl(scif);
|
|
|
|
void InitializeScif __P((unsigned int));
|
|
|
|
/*
|
|
* following functions are debugging prupose only
|
|
*/
|
|
#define CR 0x0D
|
|
#define USART_ON (unsigned int)~0x08
|
|
|
|
static void WaitFor __P((int));
|
|
void PutcScif __P((unsigned char));
|
|
void PutStrScif __P((unsigned char *));
|
|
int ScifErrCheck __P((void));
|
|
unsigned char GetcScif __P((void));
|
|
int GetStrScif __P((unsigned char *, int));
|
|
|
|
/*
|
|
* WaitFor
|
|
* : int mSec;
|
|
*/
|
|
static void
|
|
WaitFor(mSec)
|
|
int mSec;
|
|
{
|
|
|
|
/* Disable Under Flow interrupt, rising edge, 1/4 */
|
|
SHREG_TCR2 = 0x0000;
|
|
|
|
/* Set counter value (count down with 4 KHz) */
|
|
SHREG_TCNT2 = mSec * 4;
|
|
|
|
/* start Channel2 */
|
|
SHREG_TSTR |= TSTR_STR2;
|
|
|
|
/* wait for under flag ON of channel2 */
|
|
while ((SHREG_TCR2 & TCR_UNF) == 0)
|
|
;
|
|
|
|
/* stop channel2 */
|
|
SHREG_TSTR &= ~TSTR_STR2;
|
|
}
|
|
|
|
/*
|
|
* InitializeScif
|
|
* : unsigned int bps;
|
|
* : SCIF(Serial Communication Interface)
|
|
*/
|
|
|
|
void
|
|
InitializeScif(bps)
|
|
unsigned int bps;
|
|
{
|
|
|
|
/* Initialize SCR */
|
|
SHREG_SCSCR2 = 0x00;
|
|
|
|
#if 0
|
|
SHREG_SCFCR2 = SCFCR2_TFRST | SCFCR2_RFRST | SCFCR2_MCE;
|
|
#else
|
|
SHREG_SCFCR2 = SCFCR2_TFRST | SCFCR2_RFRST;
|
|
#endif
|
|
/* Serial Mode Register */
|
|
SHREG_SCSMR2 = 0x00; /* 8bit,NonParity,Even,1Stop */
|
|
|
|
/* Bit Rate Register */
|
|
SHREG_SCBRR2 = divrnd(PCLOCK, 32 * bps) - 1;
|
|
|
|
/*
|
|
* wait 1mSec, because Send/Recv must begin 1 bit period after
|
|
* BRR is set.
|
|
*/
|
|
WaitFor(1);
|
|
|
|
#if 0
|
|
SHREG_SCFCR2 = FIFO_RCV_TRIGGER_14 | FIFO_XMT_TRIGGER_1 | SCFCR2_MCE;
|
|
#else
|
|
SHREG_SCFCR2 = FIFO_RCV_TRIGGER_14 | FIFO_XMT_TRIGGER_1;
|
|
#endif
|
|
|
|
/* Send permission, Recieve permission ON */
|
|
SHREG_SCSCR2 = SCSCR2_TE | SCSCR2_RE;
|
|
|
|
/* Serial Status Register */
|
|
SHREG_SCSSR2 &= SCSSR2_TDFE; /* Clear Status */
|
|
}
|
|
|
|
|
|
/*
|
|
* PutcScif
|
|
* : unsigned char c;
|
|
*/
|
|
|
|
void
|
|
PutcScif(c)
|
|
unsigned char c;
|
|
{
|
|
|
|
/* wait for ready */
|
|
while ((SHREG_SCFDR2 & SCFDR2_TXCNT) == SCFDR2_TXF_FULL)
|
|
;
|
|
|
|
/* write send data to send register */
|
|
SHREG_SCFTDR2 = c;
|
|
|
|
/* clear ready flag */
|
|
SHREG_SCSSR2 &= ~(SCSSR2_TDFE | SCSSR2_TEND);
|
|
|
|
if (c == '\n') {
|
|
while ((SHREG_SCFDR2 & SCFDR2_TXCNT) == SCFDR2_TXF_FULL)
|
|
;
|
|
|
|
SHREG_SCFTDR2 = '\r';
|
|
|
|
SHREG_SCSSR2 &= ~(SCSSR2_TDFE | SCSSR2_TEND);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* PutStrScif
|
|
* : unsigned char *s;
|
|
*/
|
|
void
|
|
PutStrScif(s)
|
|
unsigned char *s;
|
|
{
|
|
|
|
while (*s)
|
|
PutcScif(*s++);
|
|
}
|
|
|
|
/*
|
|
* : ScifErrCheck
|
|
* 0x80 = error
|
|
* 0x08 = frame error
|
|
* 0x04 = parity error
|
|
*/
|
|
int
|
|
ScifErrCheck(void)
|
|
{
|
|
|
|
return(SHREG_SCSSR2 & (SCSSR2_ER | SCSSR2_FER | SCSSR2_PER));
|
|
}
|
|
|
|
/*
|
|
* GetcScif
|
|
*/
|
|
#if 0
|
|
/* Old code */
|
|
unsigned char
|
|
GetcScif(void)
|
|
{
|
|
unsigned char c, err_c;
|
|
|
|
while (((err_c = SHREG_SCSSR2)
|
|
& (SCSSR2_RDF | SCSSR2_ER | SCSSR2_FER | SCSSR2_PER | SCSSR2_DR)) == 0)
|
|
;
|
|
if ((err_c & (SCSSR2_ER | SCSSR2_FER | SCSSR2_PER)) != 0)
|
|
return(err_c |= 0x80);
|
|
|
|
c = SHREG_SCFRDR2;
|
|
|
|
SHREG_SCSSR2 &= ~(SCSSR2_RDF | SCSSR2_DR);
|
|
|
|
return(c);
|
|
}
|
|
#else
|
|
unsigned char
|
|
GetcScif(void)
|
|
{
|
|
unsigned char c, err_c;
|
|
|
|
/* wait for ready */
|
|
while ((SHREG_SCFDR2 & SCFDR2_RECVCNT) == 0)
|
|
;
|
|
err_c = SHREG_SCSSR2;
|
|
if ((err_c & (SCSSR2_ER | SCSSR2_BRK | SCSSR2_FER | SCSSR2_PER)) != 0)
|
|
return(err_c |= 0x80);
|
|
|
|
c = SHREG_SCFRDR2;
|
|
|
|
SHREG_SCSSR2 &= ~(SCSSR2_ER | SCSSR2_BRK | SCSSR2_RDF | SCSSR2_DR);
|
|
|
|
return(c);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* GetStrScif
|
|
* : unsigned char *s;
|
|
* : int size;
|
|
*/
|
|
int
|
|
GetStrScif(s, size)
|
|
unsigned char *s;
|
|
int size;
|
|
{
|
|
|
|
for (; size ; size--) {
|
|
*s = GetcScif();
|
|
if (*s & 0x80)
|
|
return -1;
|
|
if (*s == CR) {
|
|
*s = 0;
|
|
break;
|
|
}
|
|
s++;
|
|
}
|
|
if (size == 0)
|
|
*s = 0;
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
#define SCIF_MAX_UNITS 2
|
|
#else
|
|
#define SCIF_MAX_UNITS 1
|
|
#endif
|
|
|
|
|
|
static int
|
|
scif_match(parent, cfp, aux)
|
|
struct device *parent;
|
|
struct cfdata *cfp;
|
|
void *aux;
|
|
{
|
|
struct shb_attach_args *sa = aux;
|
|
|
|
if (strcmp(cfp->cf_driver->cd_name, "scif")
|
|
|| cfp->cf_unit >= SCIF_MAX_UNITS)
|
|
return 0;
|
|
|
|
sa->ia_iosize = 0x10;
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
scif_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct scif_softc *sc = (struct scif_softc *)self;
|
|
struct tty *tp;
|
|
int irq;
|
|
struct shb_attach_args *ia = aux;
|
|
|
|
sc->sc_hwflags = 0; /* XXX */
|
|
sc->sc_swflags = 0; /* XXX */
|
|
sc->sc_fifolen = 16;
|
|
|
|
irq = ia->ia_irq;
|
|
|
|
SET(sc->sc_hwflags, SCIF_HW_DEV_OK);
|
|
SET(sc->sc_hwflags, SCIF_HW_CONSOLE);
|
|
|
|
#if 0
|
|
if (irq != IRQUNK) {
|
|
sc->sc_ih = shb_intr_establish(irq,
|
|
IST_EDGE, IPL_SERIAL, scifintr, sc);
|
|
}
|
|
#else
|
|
if (irq != IRQUNK) {
|
|
sc->sc_ih = shb_intr_establish(SCIF_IRQ,
|
|
IST_EDGE, IPL_SERIAL, scifintr, sc);
|
|
}
|
|
#endif
|
|
|
|
printf("\n");
|
|
|
|
printf("%s: console\n", sc->sc_dev.dv_xname);
|
|
|
|
tp = ttymalloc();
|
|
tp->t_oproc = scifstart;
|
|
tp->t_param = scifparam;
|
|
tp->t_hwiflow = NULL;
|
|
|
|
sc->sc_tty = tp;
|
|
sc->sc_rbuf = malloc(scif_rbuf_size << 1, M_DEVBUF, M_NOWAIT);
|
|
if (sc->sc_rbuf == NULL) {
|
|
printf("%s: unable to allocate ring buffer\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
sc->sc_ebuf = sc->sc_rbuf + (scif_rbuf_size << 1);
|
|
|
|
tty_attach(tp);
|
|
}
|
|
|
|
/*
|
|
* Start or restart transmission.
|
|
*/
|
|
static void
|
|
scifstart(tp)
|
|
struct tty *tp;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(tp->t_dev)];
|
|
int s;
|
|
|
|
s = spltty();
|
|
if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
|
|
goto out;
|
|
if (sc->sc_tx_stopped)
|
|
goto out;
|
|
|
|
if (tp->t_outq.c_cc <= tp->t_lowat) {
|
|
if (ISSET(tp->t_state, TS_ASLEEP)) {
|
|
CLR(tp->t_state, TS_ASLEEP);
|
|
wakeup(&tp->t_outq);
|
|
}
|
|
selwakeup(&tp->t_wsel);
|
|
if (tp->t_outq.c_cc == 0)
|
|
goto out;
|
|
}
|
|
|
|
/* Grab the first contiguous region of buffer space. */
|
|
{
|
|
u_char *tba;
|
|
int tbc;
|
|
|
|
tba = tp->t_outq.c_cf;
|
|
tbc = ndqb(&tp->t_outq, 0);
|
|
|
|
(void)splserial();
|
|
|
|
sc->sc_tba = tba;
|
|
sc->sc_tbc = tbc;
|
|
}
|
|
|
|
SET(tp->t_state, TS_BUSY);
|
|
sc->sc_tx_busy = 1;
|
|
|
|
/* Enable transmit completion interrupts if necessary. */
|
|
SHREG_SCSCR2 |= SCSCR2_TIE | SCSCR2_RIE;
|
|
|
|
/* Output the first chunk of the contiguous buffer. */
|
|
{
|
|
int n;
|
|
int max;
|
|
int i;
|
|
|
|
n = sc->sc_tbc;
|
|
max = sc->sc_fifolen - ((SHREG_SCFDR2 & SCFDR2_TXCNT) >> 8);
|
|
if (n > max)
|
|
n = max;
|
|
|
|
for (i = 0; i < n; i++) {
|
|
PutcScif(*(sc->sc_tba));
|
|
sc->sc_tba++;
|
|
}
|
|
sc->sc_tbc -= n;
|
|
}
|
|
out:
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set SCIF tty parameters from termios.
|
|
* XXX - Should just copy the whole termios after
|
|
* making sure all the changes could be done.
|
|
*/
|
|
static int
|
|
scifparam(tp, t)
|
|
struct tty *tp;
|
|
struct termios *t;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(tp->t_dev)];
|
|
int ospeed = t->c_ospeed;
|
|
int s;
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return (EIO);
|
|
|
|
/* Check requested parameters. */
|
|
if (ospeed < 0)
|
|
return (EINVAL);
|
|
if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
|
|
return (EINVAL);
|
|
|
|
/*
|
|
* For the console, always force CLOCAL and !HUPCL, so that the port
|
|
* is always active.
|
|
*/
|
|
if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) ||
|
|
ISSET(sc->sc_hwflags, SCIF_HW_CONSOLE)) {
|
|
SET(t->c_cflag, CLOCAL);
|
|
CLR(t->c_cflag, HUPCL);
|
|
}
|
|
|
|
/*
|
|
* If there were no changes, don't do anything. This avoids dropping
|
|
* input and improves performance when all we did was frob things like
|
|
* VMIN and VTIME.
|
|
*/
|
|
if (tp->t_ospeed == t->c_ospeed &&
|
|
tp->t_cflag == t->c_cflag)
|
|
return (0);
|
|
|
|
#if 0
|
|
/* XXX (msaitoh) */
|
|
lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag);
|
|
#endif
|
|
|
|
s = splserial();
|
|
|
|
/*
|
|
* Set the flow control pins depending on the current flow control
|
|
* mode.
|
|
*/
|
|
if (ISSET(t->c_cflag, CRTSCTS)) {
|
|
SHREG_SCFCR2 |= SCFCR2_MCE;
|
|
} else {
|
|
SHREG_SCFCR2 &= ~SCFCR2_MCE;
|
|
}
|
|
|
|
SHREG_SCBRR2 = divrnd(PCLOCK, 32 * ospeed) -1;
|
|
|
|
/*
|
|
* Set the FIFO threshold based on the receive speed.
|
|
*
|
|
* * If it's a low speed, it's probably a mouse or some other
|
|
* interactive device, so set the threshold low.
|
|
* * If it's a high speed, trim the trigger level down to prevent
|
|
* overflows.
|
|
* * Otherwise set it a bit higher.
|
|
*/
|
|
#if 0
|
|
/* XXX (msaitoh) */
|
|
if (ISSET(sc->sc_hwflags, SCIF_HW_HAYESP))
|
|
sc->sc_fifo = FIFO_DMA_MODE | FIFO_ENABLE | FIFO_TRIGGER_8;
|
|
else if (ISSET(sc->sc_hwflags, SCIF_HW_FIFO))
|
|
sc->sc_fifo = FIFO_ENABLE |
|
|
(t->c_ospeed <= 1200 ? FIFO_TRIGGER_1 :
|
|
t->c_ospeed <= 38400 ? FIFO_TRIGGER_8 : FIFO_TRIGGER_4);
|
|
else
|
|
sc->sc_fifo = 0;
|
|
#endif
|
|
|
|
/* And copy to tty. */
|
|
tp->t_ispeed = 0;
|
|
tp->t_ospeed = t->c_ospeed;
|
|
tp->t_cflag = t->c_cflag;
|
|
|
|
if (!sc->sc_heldchange) {
|
|
if (sc->sc_tx_busy) {
|
|
sc->sc_heldtbc = sc->sc_tbc;
|
|
sc->sc_tbc = 0;
|
|
sc->sc_heldchange = 1;
|
|
}
|
|
#if 0
|
|
/* XXX (msaitoh) */
|
|
else
|
|
scif_loadchannelregs(sc);
|
|
#endif
|
|
}
|
|
|
|
if (!ISSET(t->c_cflag, CHWFLOW)) {
|
|
/* Disable the high water mark. */
|
|
sc->sc_r_hiwat = 0;
|
|
sc->sc_r_lowat = 0;
|
|
if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) {
|
|
CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED);
|
|
scif_schedrx(sc);
|
|
}
|
|
} else {
|
|
sc->sc_r_hiwat = scif_rbuf_hiwat;
|
|
sc->sc_r_lowat = scif_rbuf_lowat;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
#ifdef SCIF_DEBUG
|
|
if (scif_debug)
|
|
scifstatus(sc, "scifparam ");
|
|
#endif
|
|
|
|
if (!ISSET(t->c_cflag, CHWFLOW)) {
|
|
if (sc->sc_tx_stopped) {
|
|
sc->sc_tx_stopped = 0;
|
|
scifstart(tp);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
scif_iflush(sc)
|
|
struct scif_softc *sc;
|
|
{
|
|
int i;
|
|
unsigned char c;
|
|
|
|
i = SHREG_SCFDR2 & SCFDR2_RECVCNT;
|
|
|
|
while (i > 0) {
|
|
c = SHREG_SCFRDR2;
|
|
SHREG_SCSSR2 &= ~(SCSSR2_RDF | SCSSR2_DR);
|
|
i--;
|
|
}
|
|
}
|
|
|
|
int scif_getc __P((void));
|
|
void scif_putc __P((int));
|
|
|
|
int
|
|
scif_getc()
|
|
{
|
|
|
|
return (GetcScif());
|
|
}
|
|
|
|
void
|
|
scif_putc(int c)
|
|
{
|
|
|
|
PutcScif(c);
|
|
}
|
|
|
|
int
|
|
scifopen(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag, mode;
|
|
struct proc *p;
|
|
{
|
|
int unit = SCIFUNIT(dev);
|
|
struct scif_softc *sc;
|
|
struct tty *tp;
|
|
int s, s2;
|
|
int error;
|
|
|
|
if (unit >= scif_cd.cd_ndevs)
|
|
return (ENXIO);
|
|
sc = scif_cd.cd_devs[unit];
|
|
if (sc == 0 || !ISSET(sc->sc_hwflags, SCIF_HW_DEV_OK) ||
|
|
sc->sc_rbuf == NULL)
|
|
return (ENXIO);
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return (ENXIO);
|
|
|
|
#ifdef KGDB
|
|
/*
|
|
* If this is the kgdb port, no other use is permitted.
|
|
*/
|
|
if (ISSET(sc->sc_hwflags, SCIF_HW_KGDB))
|
|
return (EBUSY);
|
|
#endif
|
|
|
|
tp = sc->sc_tty;
|
|
|
|
if (ISSET(tp->t_state, TS_ISOPEN) &&
|
|
ISSET(tp->t_state, TS_XCLUDE) &&
|
|
p->p_ucred->cr_uid != 0)
|
|
return (EBUSY);
|
|
|
|
s = spltty();
|
|
|
|
/*
|
|
* Do the following iff this is a first open.
|
|
*/
|
|
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
|
|
struct termios t;
|
|
|
|
tp->t_dev = dev;
|
|
|
|
s2 = splserial();
|
|
|
|
/* Turn on interrupts. */
|
|
SHREG_SCSCR2 |= SCSCR2_TIE | SCSCR2_RIE;
|
|
|
|
splx(s2);
|
|
|
|
/*
|
|
* Initialize the termios status to the defaults. Add in the
|
|
* sticky bits from TIOCSFLAGS.
|
|
*/
|
|
t.c_ispeed = 0;
|
|
if (ISSET(sc->sc_hwflags, SCIF_HW_CONSOLE)) {
|
|
t.c_ospeed = scifcn_speed; /* XXX (msaitoh) */
|
|
t.c_cflag = scifconscflag;
|
|
} else {
|
|
t.c_ospeed = TTYDEF_SPEED;
|
|
t.c_cflag = TTYDEF_CFLAG;
|
|
}
|
|
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
|
|
SET(t.c_cflag, CLOCAL);
|
|
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
|
|
SET(t.c_cflag, CRTSCTS);
|
|
if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
|
|
SET(t.c_cflag, MDMBUF);
|
|
/* Make sure scifparam() will do something. */
|
|
tp->t_ospeed = 0;
|
|
(void) scifparam(tp, &t);
|
|
tp->t_iflag = TTYDEF_IFLAG;
|
|
tp->t_oflag = TTYDEF_OFLAG;
|
|
tp->t_lflag = TTYDEF_LFLAG;
|
|
ttychars(tp);
|
|
ttsetwater(tp);
|
|
|
|
s2 = splserial();
|
|
|
|
/* Clear the input ring, and unblock. */
|
|
sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf;
|
|
sc->sc_rbavail = scif_rbuf_size;
|
|
scif_iflush(sc);
|
|
CLR(sc->sc_rx_flags, RX_ANY_BLOCK);
|
|
#if 0
|
|
/* XXX (msaitoh) */
|
|
scif_hwiflow(sc);
|
|
#endif
|
|
|
|
#ifdef SCIF_DEBUG
|
|
if (scif_debug)
|
|
scifstatus(sc, "scifopen ");
|
|
#endif
|
|
|
|
splx(s2);
|
|
}
|
|
|
|
splx(s);
|
|
|
|
error = ttyopen(tp, SCIFDIALOUT(dev), ISSET(flag, O_NONBLOCK));
|
|
if (error)
|
|
goto bad;
|
|
|
|
error = (*linesw[tp->t_line].l_open)(dev, tp);
|
|
if (error)
|
|
goto bad;
|
|
|
|
return (0);
|
|
|
|
bad:
|
|
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
scifclose(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag, mode;
|
|
struct proc *p;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(dev)];
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
/* XXX This is for cons.c. */
|
|
if (!ISSET(tp->t_state, TS_ISOPEN))
|
|
return (0);
|
|
|
|
(*linesw[tp->t_line].l_close)(tp, flag);
|
|
ttyclose(tp);
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return (0);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
scifread(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(dev)];
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
|
|
}
|
|
|
|
int
|
|
scifwrite(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(dev)];
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
|
|
}
|
|
|
|
struct tty *
|
|
sciftty(dev)
|
|
dev_t dev;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(dev)];
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
return (tp);
|
|
}
|
|
|
|
int
|
|
scifioctl(dev, cmd, data, flag, p)
|
|
dev_t dev;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(dev)];
|
|
struct tty *tp = sc->sc_tty;
|
|
int error;
|
|
int s;
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return (EIO);
|
|
|
|
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
|
|
if (error >= 0)
|
|
return (error);
|
|
|
|
error = ttioctl(tp, cmd, data, flag, p);
|
|
if (error >= 0)
|
|
return (error);
|
|
|
|
error = 0;
|
|
|
|
s = splserial();
|
|
|
|
switch (cmd) {
|
|
case TIOCSBRK:
|
|
scif_break(sc, 1);
|
|
break;
|
|
|
|
case TIOCCBRK:
|
|
scif_break(sc, 0);
|
|
break;
|
|
|
|
case TIOCGFLAGS:
|
|
*(int *)data = sc->sc_swflags;
|
|
break;
|
|
|
|
case TIOCSFLAGS:
|
|
error = suser(p->p_ucred, &p->p_acflag);
|
|
if (error)
|
|
break;
|
|
sc->sc_swflags = *(int *)data;
|
|
break;
|
|
|
|
default:
|
|
error = ENOTTY;
|
|
break;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
return (error);
|
|
}
|
|
|
|
integrate void
|
|
scif_schedrx(sc)
|
|
struct scif_softc *sc;
|
|
{
|
|
|
|
sc->sc_rx_ready = 1;
|
|
|
|
/* Wake up the poller. */
|
|
#ifdef __GENERIC_SOFT_INTERRUPTS
|
|
softintr_schedule(sc->sc_si);
|
|
#else
|
|
#ifndef __NO_SOFT_SERIAL_INTERRUPT
|
|
setsoftserial();
|
|
#else
|
|
if (!scif_softintr_scheduled) {
|
|
scif_softintr_scheduled = 1;
|
|
timeout(scifsoft, NULL, 1);
|
|
}
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void
|
|
scif_break(sc, onoff)
|
|
struct scif_softc *sc;
|
|
int onoff;
|
|
{
|
|
|
|
if (onoff)
|
|
SHREG_SCSSR2 &= ~SCSSR2_TDFE;
|
|
else
|
|
SHREG_SCSSR2 |= SCSSR2_TDFE;
|
|
|
|
#if 0 /* XXX */
|
|
if (!sc->sc_heldchange) {
|
|
if (sc->sc_tx_busy) {
|
|
sc->sc_heldtbc = sc->sc_tbc;
|
|
sc->sc_tbc = 0;
|
|
sc->sc_heldchange = 1;
|
|
} else
|
|
scif_loadchannelregs(sc);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Stop output, e.g., for ^S or output flush.
|
|
*/
|
|
void
|
|
scifstop(tp, flag)
|
|
struct tty *tp;
|
|
int flag;
|
|
{
|
|
struct scif_softc *sc = scif_cd.cd_devs[SCIFUNIT(tp->t_dev)];
|
|
int s;
|
|
|
|
s = splserial();
|
|
if (ISSET(tp->t_state, TS_BUSY)) {
|
|
/* Stop transmitting at the next chunk. */
|
|
sc->sc_tbc = 0;
|
|
sc->sc_heldtbc = 0;
|
|
if (!ISSET(tp->t_state, TS_TTSTOP))
|
|
SET(tp->t_state, TS_FLUSH);
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
scif_intr_init()
|
|
{
|
|
/* XXX */
|
|
}
|
|
|
|
void
|
|
scifdiag(arg)
|
|
void *arg;
|
|
{
|
|
struct scif_softc *sc = arg;
|
|
int overflows, floods;
|
|
int s;
|
|
|
|
s = splserial();
|
|
overflows = sc->sc_overflows;
|
|
sc->sc_overflows = 0;
|
|
floods = sc->sc_floods;
|
|
sc->sc_floods = 0;
|
|
sc->sc_errors = 0;
|
|
splx(s);
|
|
|
|
log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n",
|
|
sc->sc_dev.dv_xname,
|
|
overflows, overflows == 1 ? "" : "s",
|
|
floods, floods == 1 ? "" : "s");
|
|
}
|
|
|
|
integrate void
|
|
scif_rxsoft(sc, tp)
|
|
struct scif_softc *sc;
|
|
struct tty *tp;
|
|
{
|
|
int (*rint) __P((int c, struct tty *tp)) = linesw[tp->t_line].l_rint;
|
|
u_char *get, *end;
|
|
u_int cc, scc;
|
|
u_char ssr2;
|
|
int code;
|
|
int s;
|
|
|
|
end = sc->sc_ebuf;
|
|
get = sc->sc_rbget;
|
|
scc = cc = scif_rbuf_size - sc->sc_rbavail;
|
|
|
|
if (cc == scif_rbuf_size) {
|
|
sc->sc_floods++;
|
|
if (sc->sc_errors++ == 0)
|
|
timeout(scifdiag, sc, 60 * hz);
|
|
}
|
|
|
|
while (cc) {
|
|
code = get[0];
|
|
ssr2 = get[1];
|
|
if (ISSET(ssr2, SCSSR2_BRK | SCSSR2_FER | SCSSR2_PER)) {
|
|
if (ISSET(ssr2, SCSSR2_BRK | SCSSR2_FER))
|
|
SET(code, TTY_FE);
|
|
if (ISSET(ssr2, SCSSR2_PER))
|
|
SET(code, TTY_PE);
|
|
}
|
|
if ((*rint)(code, tp) == -1) {
|
|
/*
|
|
* The line discipline's buffer is out of space.
|
|
*/
|
|
if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) {
|
|
/*
|
|
* We're either not using flow control, or the
|
|
* line discipline didn't tell us to block for
|
|
* some reason. Either way, we have no way to
|
|
* know when there's more space available, so
|
|
* just drop the rest of the data.
|
|
*/
|
|
get += cc << 1;
|
|
if (get >= end)
|
|
get -= scif_rbuf_size << 1;
|
|
cc = 0;
|
|
} else {
|
|
/*
|
|
* Don't schedule any more receive processing
|
|
* until the line discipline tells us there's
|
|
* space available (through scifhwiflow()).
|
|
* Leave the rest of the data in the input
|
|
* buffer.
|
|
*/
|
|
SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED);
|
|
}
|
|
break;
|
|
}
|
|
get += 2;
|
|
if (get >= end)
|
|
get = sc->sc_rbuf;
|
|
cc--;
|
|
}
|
|
|
|
if (cc != scc) {
|
|
sc->sc_rbget = get;
|
|
s = splserial();
|
|
cc = sc->sc_rbavail += scc - cc;
|
|
/* Buffers should be ok again, release possible block. */
|
|
if (cc >= sc->sc_r_lowat) {
|
|
if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) {
|
|
CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
|
|
SHREG_SCSCR2 |= SCSCR2_RIE;
|
|
}
|
|
#if 0
|
|
if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) {
|
|
CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED);
|
|
scif_hwiflow(sc);
|
|
}
|
|
#endif
|
|
}
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
integrate void
|
|
scif_txsoft(sc, tp)
|
|
struct scif_softc *sc;
|
|
struct tty *tp;
|
|
{
|
|
|
|
CLR(tp->t_state, TS_BUSY);
|
|
if (ISSET(tp->t_state, TS_FLUSH))
|
|
CLR(tp->t_state, TS_FLUSH);
|
|
else
|
|
ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf));
|
|
(*linesw[tp->t_line].l_start)(tp);
|
|
}
|
|
|
|
integrate void
|
|
scif_stsoft(sc, tp)
|
|
struct scif_softc *sc;
|
|
struct tty *tp;
|
|
{
|
|
#if 0
|
|
/* XXX (msaitoh) */
|
|
u_char msr, delta;
|
|
int s;
|
|
|
|
s = splserial();
|
|
msr = sc->sc_msr;
|
|
delta = sc->sc_msr_delta;
|
|
sc->sc_msr_delta = 0;
|
|
splx(s);
|
|
|
|
if (ISSET(delta, sc->sc_msr_dcd)) {
|
|
/*
|
|
* Inform the tty layer that carrier detect changed.
|
|
*/
|
|
(void) (*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD));
|
|
}
|
|
|
|
if (ISSET(delta, sc->sc_msr_cts)) {
|
|
/* Block or unblock output according to flow control. */
|
|
if (ISSET(msr, sc->sc_msr_cts)) {
|
|
sc->sc_tx_stopped = 0;
|
|
(*linesw[tp->t_line].l_start)(tp);
|
|
} else {
|
|
sc->sc_tx_stopped = 1;
|
|
}
|
|
}
|
|
|
|
#ifdef SCIF_DEBUG
|
|
if (scif_debug)
|
|
scifstatus(sc, "scif_stsoft");
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
#ifdef __GENERIC_SOFT_INTERRUPTS
|
|
void
|
|
scifsoft(arg)
|
|
void *arg;
|
|
{
|
|
struct scif_softc *sc = arg;
|
|
struct tty *tp;
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return;
|
|
|
|
{
|
|
#else
|
|
void
|
|
#ifndef __NO_SOFT_SERIAL_INTERRUPT
|
|
scifsoft()
|
|
#else
|
|
scifsoft(arg)
|
|
void *arg;
|
|
#endif
|
|
{
|
|
struct scif_softc *sc;
|
|
struct tty *tp;
|
|
int unit;
|
|
#ifdef __NO_SOFT_SERIAL_INTERRUPT
|
|
int s;
|
|
|
|
s = splsoftserial();
|
|
scif_softintr_scheduled = 0;
|
|
#endif
|
|
|
|
for (unit = 0; unit < scif_cd.cd_ndevs; unit++) {
|
|
sc = scif_cd.cd_devs[unit];
|
|
if (sc == NULL || !ISSET(sc->sc_hwflags, SCIF_HW_DEV_OK))
|
|
continue;
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
tp = sc->sc_tty;
|
|
if (tp == NULL)
|
|
continue;
|
|
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0)
|
|
continue;
|
|
#endif
|
|
tp = sc->sc_tty;
|
|
|
|
if (sc->sc_rx_ready) {
|
|
sc->sc_rx_ready = 0;
|
|
scif_rxsoft(sc, tp);
|
|
}
|
|
|
|
#if 0
|
|
if (sc->sc_st_check) {
|
|
sc->sc_st_check = 0;
|
|
scif_stsoft(sc, tp);
|
|
}
|
|
#endif
|
|
|
|
if (sc->sc_tx_done) {
|
|
sc->sc_tx_done = 0;
|
|
scif_txsoft(sc, tp);
|
|
}
|
|
}
|
|
|
|
#ifndef __GENERIC_SOFT_INTERRUPTS
|
|
#ifdef __NO_SOFT_SERIAL_INTERRUPT
|
|
splx(s);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
int
|
|
scifintr(arg)
|
|
void *arg;
|
|
{
|
|
struct scif_softc *sc = arg;
|
|
u_char *put, *end;
|
|
u_int cc;
|
|
u_short ssr2;
|
|
int count;
|
|
|
|
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
|
|
return (0);
|
|
|
|
end = sc->sc_ebuf;
|
|
put = sc->sc_rbput;
|
|
cc = sc->sc_rbavail;
|
|
|
|
ssr2 = SHREG_SCSSR2;
|
|
if (ISSET(ssr2, SCSSR2_BRK)) {
|
|
SHREG_SCSSR2 &= ~(SCSSR2_ER | SCSSR2_BRK | SCSSR2_DR);
|
|
#if defined(DDB) || defined(KGDB)
|
|
#ifdef DDB
|
|
if (ISSET(sc->sc_hwflags, SCIF_HW_CONSOLE)) {
|
|
console_debugger();
|
|
}
|
|
#endif
|
|
#ifdef KGDB
|
|
if (ISSET(sc->sc_hwflags, SCIF_HW_KGDB)) {
|
|
kgdb_connect(1);
|
|
}
|
|
#endif
|
|
#endif /* DDB || KGDB */
|
|
}
|
|
count = SHREG_SCFDR2 & SCFDR2_RECVCNT;
|
|
if (count != 0) {
|
|
while ((cc > 0) && (count > 0)) {
|
|
put[0] = SHREG_SCFRDR2;
|
|
put[1] = (u_char)(SHREG_SCSSR2 & 0x00ff);
|
|
|
|
SHREG_SCSSR2 &= ~(SCSSR2_RDF | SCSSR2_DR);
|
|
|
|
put += 2;
|
|
if (put >= end)
|
|
put = sc->sc_rbuf;
|
|
cc--;
|
|
count--;
|
|
}
|
|
|
|
/*
|
|
* Current string of incoming characters ended because
|
|
* no more data was available or we ran out of space.
|
|
* Schedule a receive event if any data was received.
|
|
* If we're out of space, turn off receive interrupts.
|
|
*/
|
|
sc->sc_rbput = put;
|
|
sc->sc_rbavail = cc;
|
|
if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED))
|
|
sc->sc_rx_ready = 1;
|
|
|
|
/*
|
|
* See if we are in danger of overflowing a buffer. If
|
|
* so, use hardware flow control to ease the pressure.
|
|
*/
|
|
if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) &&
|
|
cc < sc->sc_r_hiwat) {
|
|
SET(sc->sc_rx_flags, RX_IBUF_BLOCKED);
|
|
#if 0
|
|
scif_hwiflow(sc);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* If we're out of space, disable receive interrupts
|
|
* until the queue has drained a bit.
|
|
*/
|
|
if (!cc) {
|
|
SHREG_SCSCR2 &= ~SCSCR2_RIE;
|
|
}
|
|
} else {
|
|
if (SHREG_SCSSR2 & (SCSSR2_RDF | SCSSR2_DR)) {
|
|
SHREG_SCSCR2 &= ~(SCSCR2_TIE | SCSCR2_RIE);
|
|
}
|
|
}
|
|
|
|
#if 0
|
|
msr = bus_space_read_1(iot, ioh, scif_msr);
|
|
delta = msr ^ sc->sc_msr;
|
|
sc->sc_msr = msr;
|
|
if (ISSET(delta, sc->sc_msr_mask)) {
|
|
SET(sc->sc_msr_delta, delta);
|
|
|
|
/*
|
|
* Pulse-per-second clock signal on edge of DCD?
|
|
*/
|
|
if (ISSET(delta, sc->sc_ppsmask)) {
|
|
struct timeval tv;
|
|
if (ISSET(msr, sc->sc_ppsmask) ==
|
|
sc->sc_ppsassert) {
|
|
/* XXX nanotime() */
|
|
microtime(&tv);
|
|
TIMEVAL_TO_TIMESPEC(&tv,
|
|
&sc->ppsinfo.assert_timestamp);
|
|
if (sc->ppsparam.mode & PPS_OFFSETASSERT) {
|
|
timespecadd(&sc->ppsinfo.assert_timestamp,
|
|
&sc->ppsparam.assert_offset,
|
|
&sc->ppsinfo.assert_timestamp);
|
|
TIMESPEC_TO_TIMEVAL(&tv, &sc->ppsinfo.assert_timestamp);
|
|
}
|
|
|
|
#ifdef PPS_SYNC
|
|
if (sc->ppsparam.mode & PPS_HARDPPSONASSERT)
|
|
hardpps(&tv, tv.tv_usec);
|
|
#endif
|
|
sc->ppsinfo.assert_sequence++;
|
|
sc->ppsinfo.current_mode =
|
|
sc->ppsparam.mode;
|
|
|
|
} else if (ISSET(msr, sc->sc_ppsmask) ==
|
|
sc->sc_ppsclear) {
|
|
/* XXX nanotime() */
|
|
microtime(&tv);
|
|
TIMEVAL_TO_TIMESPEC(&tv,
|
|
&sc->ppsinfo.clear_timestamp);
|
|
if (sc->ppsparam.mode & PPS_OFFSETCLEAR) {
|
|
timespecadd(&sc->ppsinfo.clear_timestamp,
|
|
&sc->ppsparam.clear_offset,
|
|
&sc->ppsinfo.clear_timestamp);
|
|
TIMESPEC_TO_TIMEVAL(&tv, &sc->ppsinfo.clear_timestamp);
|
|
}
|
|
|
|
#ifdef PPS_SYNC
|
|
if (sc->ppsparam.mode & PPS_HARDPPSONCLEAR)
|
|
hardpps(&tv, tv.tv_usec);
|
|
#endif
|
|
sc->ppsinfo.clear_sequence++;
|
|
sc->ppsinfo.current_mode =
|
|
sc->ppsparam.mode;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop output immediately if we lose the output
|
|
* flow control signal or carrier detect.
|
|
*/
|
|
if (ISSET(~msr, sc->sc_msr_mask)) {
|
|
sc->sc_tbc = 0;
|
|
sc->sc_heldtbc = 0;
|
|
#ifdef SCIF_DEBUG
|
|
if (scif_debug)
|
|
scifstatus(sc, "scifintr ");
|
|
#endif
|
|
}
|
|
|
|
sc->sc_st_check = 1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Done handling any receive interrupts. See if data can be
|
|
* transmitted as well. Schedule tx done event if no data left
|
|
* and tty was marked busy.
|
|
*/
|
|
if (((SHREG_SCFDR2 & SCFDR2_TXCNT) >> 8) != 16) { /* XXX (msaitoh) */
|
|
/*
|
|
* If we've delayed a parameter change, do it now, and restart
|
|
* output.
|
|
*/
|
|
if (sc->sc_heldchange) {
|
|
sc->sc_heldchange = 0;
|
|
sc->sc_tbc = sc->sc_heldtbc;
|
|
sc->sc_heldtbc = 0;
|
|
}
|
|
|
|
/* Output the next chunk of the contiguous buffer, if any. */
|
|
if (sc->sc_tbc > 0) {
|
|
int n;
|
|
int max;
|
|
int i;
|
|
|
|
n = sc->sc_tbc;
|
|
max = sc->sc_fifolen -
|
|
((SHREG_SCFDR2 & SCFDR2_TXCNT) >> 8);
|
|
if (n > max)
|
|
n = max;
|
|
|
|
for (i = 0; i < n; i++) {
|
|
PutcScif(*(sc->sc_tba));
|
|
sc->sc_tba++;
|
|
}
|
|
sc->sc_tbc -= n;
|
|
} else {
|
|
/* Disable transmit completion interrupts if necessary. */
|
|
#if 0
|
|
if (ISSET(sc->sc_ier, IER_ETXRDY))
|
|
#endif
|
|
SHREG_SCSCR2 &= ~SCSCR2_TIE;
|
|
|
|
if (sc->sc_tx_busy) {
|
|
sc->sc_tx_busy = 0;
|
|
sc->sc_tx_done = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Wake up the poller. */
|
|
#ifdef __GENERIC_SOFT_INTERRUPTS
|
|
softintr_schedule(sc->sc_si);
|
|
#else
|
|
#ifndef __NO_SOFT_SERIAL_INTERRUPT
|
|
setsoftserial();
|
|
#else
|
|
if (!scif_softintr_scheduled) {
|
|
scif_softintr_scheduled = 1;
|
|
timeout(scifsoft, NULL, 1);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if NRND > 0 && defined(RND_SCIF)
|
|
rnd_add_uint32(&sc->rnd_source, iir | lsr);
|
|
#endif
|
|
|
|
return (1);
|
|
}
|
|
|
|
void
|
|
scifcnprobe(cp)
|
|
struct consdev *cp;
|
|
{
|
|
int maj;
|
|
|
|
/* locate the major number */
|
|
for (maj = 0; maj < nchrdev; maj++)
|
|
if (cdevsw[maj].d_open == scifopen)
|
|
break;
|
|
|
|
/* Initialize required fields. */
|
|
cp->cn_dev = makedev(maj, 0);
|
|
#ifdef SCIFCONSOLE
|
|
cp->cn_pri = CN_REMOTE;
|
|
#else
|
|
cp->cn_pri = CN_NORMAL;
|
|
#endif
|
|
}
|
|
|
|
#define scif_gets GetStrScif
|
|
#define scif_puts PutStrScif
|
|
|
|
void
|
|
scifcninit(cp)
|
|
struct consdev *cp;
|
|
{
|
|
|
|
InitializeScif(scifcn_speed);
|
|
}
|
|
|
|
#define scif_getc GetcScif
|
|
#define scif_putc PutcScif
|
|
|
|
int
|
|
scifcngetc(dev)
|
|
dev_t dev;
|
|
{
|
|
int c;
|
|
int s;
|
|
|
|
s = splserial();
|
|
c = scif_getc();
|
|
splx(s);
|
|
|
|
return (c);
|
|
}
|
|
|
|
void
|
|
scifcnputc(dev, c)
|
|
dev_t dev;
|
|
int c;
|
|
{
|
|
int s;
|
|
|
|
s = splserial();
|
|
scif_putc(c);
|
|
splx(s);
|
|
}
|