NetBSD/sys/dev/dec/lk201reg.h

64 lines
2.1 KiB
C

/* $NetBSD: lk201reg.h,v 1.3 2005/12/11 12:21:20 christos Exp $ */
/*
* command keycodes for Digital LK200/LK400 series keyboards.
*/
/*
* special keycodes
*/
#define LK_POWER_UP 0x01
#define LK_KEY_R_SHIFT 0xab
#define LK_KEY_SHIFT 0xae
#define LK_KEY_LOCK 0xb0
#define LK_KEY_CONTROL 0xaf
#define LK_KEY_R_ALT 0xb2
#define LK_KEY_UP 0xb3
#define LK_KEY_REPEAT 0xb4
#define LK_KEY_HOLD 0x56 /* F1 */
#define LK_KDOWN_ERROR 0x3d /* key down on powerup error */
#define LK_POWER_ERROR 0x3e /* keyboard failure on pwrup tst*/
#define LK_OUTPUT_ERROR 0xb5 /* keystrokes lost during inhbt */
#define LK_INPUT_ERROR 0xb6 /* garbage command to keyboard */
#define LK_LOWEST 0x56 /* lowest significant keycode */
/*
* keyboard commands
*/
#define LK_UPDOWN 0x86 /* bits for setting lk201 modes */
#define LK_AUTODOWN 0x82
#define LK_DOWN 0x80
#define LK_DEFAULTS 0xd3 /* reset mode settings */
#define LK_AR_ENABLE 0xe3 /* global auto repeat enable */
#define LK_CL_ENABLE 0x1b /* keyclick enable */
#define LK_CL_DISABLE 0x99 /* keyclick disable */
#define LK_CCL_ENABLE 0xbb /* enable keyclick for CTRL */
#define LK_CCL_DISABLE 0xb9 /* disable keyclick for CTRL */
#define LK_KBD_ENABLE 0x8b /* keyboard enable */
#define LK_BELL_ENABLE 0x23 /* enable the bell */
#define LK_BELL_DISABLE 0xa1 /* disable the bell */
#define LK_LED_ENABLE 0x13 /* light led */
#define LK_LED_DISABLE 0x11 /* turn off led */
#define LK_RING_BELL 0xa7 /* ring keyboard bell */
#define LK_LED_1 0x81 /* led bits */
#define LK_LED_2 0x82
#define LK_LED_3 0x84
#define LK_LED_4 0x88
#define LK_LED_WAIT 0x81
#define LK_LED_COMP 0x82
#define LK_LED_LOCK 0x84
#define LK_LED_HOLD 0x88
#define LK_LED_ALL 0x8f
#define LK_HELP 0x7c /* help key */
#define LK_DO 0x7d /* do key */
#define LK_DIV6_START 0xad /* start of div 6 */
#define LK_DIV5_END 0xb2 /* end of div 5 */
#define LK_ENABLE_401 0xe9 /* turn on LK401 mode */
#define LK_MODE_CHANGE 0xba /* mode change ack */
/* max volume is 0, lowest is 0x7 */
#define LK_PARAM_VOLUME(v) (0x80|((v)&0x7))
/* mode command details */
#define LK_CMD_MODE(m,div) ((m)|((div)<<3))