531 lines
17 KiB
Plaintext
531 lines
17 KiB
Plaintext
# $NetBSD: GENERIC,v 1.43 2002/11/22 12:21:00 wiz Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/cats/conf/std.cats"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
# estimated number of users
|
|
|
|
maxusers 32
|
|
|
|
# Standard system options
|
|
|
|
options UCONSOLE # users can use TIOCCONS (for xconsole)
|
|
options INSECURE # disable kernel securelevel
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options NEW_BUFQ_STRATEGY
|
|
|
|
# CPU options
|
|
|
|
# For StrongARM systems
|
|
options CPU_SA110 # Support the SA110 core
|
|
makeoptions COPTS="-O2 -march=armv4 -mtune=strongarm"
|
|
|
|
# FPA options
|
|
|
|
#options ARMFPE # ARM Ltd FPE
|
|
|
|
# File systems
|
|
|
|
file-system FFS # UFS
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network file system
|
|
file-system ADOSFS # AmigaDOS-compatible file system
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay filesystem
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
file-system CODA # Coda File System; also needs vcode (below)
|
|
|
|
# File system options
|
|
options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
options NFSSERVER
|
|
options SOFTDEP # FFS soft updates support
|
|
|
|
# Networking options
|
|
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
options CCITT,LLC,HDLC # X.25
|
|
options NETATALK # AppleTalk networking
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
options NFS_BOOT_BOOTP
|
|
options NFS_BOOT_DHCP
|
|
#options NFS_BOOT_BOOTPARAM
|
|
|
|
# Compatibility options
|
|
|
|
#options COMPAT_43 # 4.3BSD compatibility.
|
|
options COMPAT_14 # NetBSD 1.4 compatibility.
|
|
options COMPAT_13 # NetBSD 1.3 compatibility.
|
|
#options COMPAT_12 # NetBSD 1.2 compatibility.
|
|
#options COMPAT_11 # NetBSD 1.1 compatibility.
|
|
#options COMPAT_10 # NetBSD 1.0 compatibility.
|
|
#options COMPAT_09 # NetBSD 0.9 compatibility.
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
# Shared memory options
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
# Device options
|
|
|
|
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
|
|
#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
|
|
#options MEMORY_DISK_IS_ROOT # use memory disk as root
|
|
|
|
# Miscellaneous kernel options
|
|
options KTRACE # system call tracing, a la ktrace(1)
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
options IRQSTATS # manage IRQ statistics
|
|
#options LKM # loadable kernel modules
|
|
#options KMEMSTATS # kernel memory statistics
|
|
options SCSIVERBOSE # Verbose SCSI errors
|
|
options PCIVERBOSE # Verbose PCI descriptions
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
options PMAP_STATIC_L1S=128
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# if set defines a keycode for the fcom console to break into ddb.
|
|
# 0x40 == @, see man ascii(7)
|
|
#options DDB_KEYCODE=0x40
|
|
|
|
# wscons options
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# different kernel output - see dev/wscons/wsdisplayvar.h
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
# see dev/wscons/wskbdmap_mfii.h for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
# the following enables some functions to get mouse console support.
|
|
# if you want a really secure system, it may be better not to enable them,
|
|
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
|
|
#options WSDISPLAY_CHARFUNCS # mouse console support
|
|
|
|
# Development and Debugging options
|
|
|
|
#options ARM700BUGTRACK # track the ARM700 swi bug
|
|
#options PORTMASTER # Enable PortMaster only options
|
|
options DIAGNOSTIC # internally consistency checks
|
|
#options PMAP_DEBUG # Enable pmap_debug_level code
|
|
#options IPKDB # remote kernel debugging
|
|
options DDB # in-kernel debugger
|
|
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
options SYMTAB_SPACE=380000
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
# The main bus device
|
|
mainbus0 at root
|
|
|
|
# The boot cpu
|
|
cpu0 at mainbus?
|
|
|
|
# Core logic
|
|
footbridge0 at mainbus?
|
|
|
|
# footbridge uart
|
|
fcom0 at footbridge?
|
|
|
|
# system clock via footbridge
|
|
#clock* at footbridge?
|
|
|
|
# time-of-day device via footbridge or RTC
|
|
todclock0 at todservice?
|
|
|
|
# PCI bus support
|
|
# PCI bus via footbridge
|
|
pci0 at footbridge? # PCI bus
|
|
|
|
pci* at ppb? bus ?
|
|
|
|
# PCI bridges
|
|
ppb* at pci? dev ? function ? # PCI-PCI bridges
|
|
# XXX 'puc's aren't really bridges, but there's no better place for them here
|
|
#puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
|
|
|
# PCI serial interfaces
|
|
#com* at puc? port ? # 16x50s on "universal" comm boards
|
|
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
|
|
|
|
# PCI parallel printer interfaces
|
|
#lpt* at puc? port ? # || ports on "universal" comm boards
|
|
|
|
# PCI SCSI Controllers and Buses
|
|
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], ULTRA SCSI
|
|
scsibus* at adv?
|
|
#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
|
|
#scsibus* at adw?
|
|
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI controllers
|
|
scsibus* at ahc?
|
|
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
|
|
#scsibus* at bha?
|
|
iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
|
|
scsibus* at iha?
|
|
isp* at pci? dev ? function ? # Qlogic ISP 10x0 SCSI controllers
|
|
scsibus* at isp?
|
|
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
|
|
scsibus* at pcscp?
|
|
siop* at pci? dev ? function ? # NCR 53c8xx SCSI
|
|
scsibus* at siop?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
st* at scsibus? target ? lun ? # SCSI tape drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
#ch* at scsibus? target ? lun ? # SCSI auto-changers
|
|
#uk* at scsibus? target ? lun ? # SCSI unknown device
|
|
#ss* at scsibus? target ? lun ? # SCSI scanner
|
|
|
|
# PCI IDE Controllers and Devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
pciide* at pci? dev ? function ? flags 0x0000
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at pciide? channel ? drive ? flags 0x0000 # the drives themselves
|
|
|
|
# ATAPI bus support
|
|
atapibus* at pciide? channel ?
|
|
|
|
# ATAPI devices
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
# PCI network interfaces
|
|
#en* at pci? dev ? function ? # ENI/Adaptec ATM
|
|
ep* at pci? dev ? function ? # 3C590 ethernet cards
|
|
ex* at pci? dev ? function ? # 3Com 90x[B]
|
|
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
|
#esh* at pci? dev ? function ? # Essential HIPPI card
|
|
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
|
|
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
|
|
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
|
|
ne* at pci? dev ? function ? # NE2000 compat ethernet
|
|
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
|
|
sip* at pci? dev ? function ? # SiS 900 Ethernet
|
|
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
|
|
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
|
|
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
|
|
rtk* at pci? dev ? function ? # Realtek 8129/8139
|
|
|
|
# MII/PHY support
|
|
acphy* at mii? phy ? # DAltima AC101 and AMD Am79c874 PHYs
|
|
amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
|
|
bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
|
|
brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
|
|
dmphy* at mii? phy ? # Davicom DM9101 PHYs
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
|
|
gphyter* at mii? phy ? # NS83861 Gig-E PHY
|
|
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
iophy* at mii? phy ? # Intel 82553 PHYs
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
pnaphy* at mii? phy ? # generic HomePNA PHYs
|
|
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
|
|
|
|
# USB Controller and Devices
|
|
|
|
# PCI USB controllers
|
|
ohci* at pci? # Open Host Controller
|
|
|
|
# USB bus support
|
|
usb* at ohci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB HID device
|
|
uhidev* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mice
|
|
ums* at uhidev? reportid ?
|
|
wsmouse* at ums?
|
|
|
|
# USB Keyboards
|
|
ukbd* at uhidev? reportid ?
|
|
wskbd* at ukbd? console ?
|
|
|
|
# USB Generic HID devices
|
|
uhid* at uhidev? reportid ?
|
|
|
|
# USB Printer
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Modem
|
|
umodem* at uhub? port ? configuration ?
|
|
ucom* at umodem?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
atapibus* at umass? channel ?
|
|
scsibus* at umass? channel ?
|
|
|
|
# USB audio
|
|
uaudio* at uhub? port ? configuration ?
|
|
audio* at uaudio?
|
|
|
|
# USB MIDI
|
|
umidi* at uhub? port ? configuration ?
|
|
midi* at umidi?
|
|
|
|
# USB Ethernet adapters
|
|
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
|
|
|
# Prolofic PL2301/PL2302 host-to-host adapter
|
|
upl* at uhub? port ?
|
|
|
|
# Serial adapters
|
|
# FTDI FT8U100AX serial adapter
|
|
uftdi* at uhub? port ?
|
|
ucom* at uftdi? portno ?
|
|
|
|
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
ucom* at uplcom? portno ?
|
|
|
|
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
|
ucom* at umct? portno ?
|
|
|
|
# Diamond Multimedia Rio 500
|
|
urio* at uhub? port ?
|
|
|
|
# USB Handspring Visor
|
|
uvisor* at uhub? port ?
|
|
ucom* at uvisor?
|
|
|
|
# USB scanners
|
|
uscanner* at uhub? port ?
|
|
|
|
# USB scanners that use SCSI emulation, e.g., HP5300
|
|
usscanner* at uhub? port ?
|
|
scsibus* at usscanner? channel ?
|
|
|
|
# Y@P firmware loader
|
|
uyap* at uhub? port ?
|
|
|
|
# USB Generic driver
|
|
ugen* at uhub? port ?
|
|
|
|
# Audio Devices
|
|
|
|
# PCI audio devices
|
|
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
|
#sv* at pci? dev ? function ? # S3 SonicVibes
|
|
|
|
# Audio support
|
|
#audio* at eap?
|
|
#audio* at sv?
|
|
|
|
vga* at pci?
|
|
wsdisplay* at vga? console ?
|
|
|
|
# ISA bus bridging
|
|
|
|
pcib* at pci? dev ? function ? # PCI-ISA bridge
|
|
isa* at pcib? # ISA bus
|
|
|
|
# ISA Plug-and-Play bus support
|
|
isapnp0 at isa?
|
|
|
|
# wscons
|
|
pckbc0 at isa? # pc keyboard controller
|
|
pckbd* at pckbc? # PC keyboard
|
|
pms* at pckbc? # PS/2 mouse for wsmouse
|
|
wskbd* at pckbd? console ?
|
|
wsmouse* at pms?
|
|
|
|
pcppi0 at isa?
|
|
sysbeep0 at pcppi?
|
|
|
|
# ISA Plug-and-Play serial interfaces
|
|
com* at isapnp? # Modems and serial boards
|
|
|
|
# ISA Plug-and-Play network interfaces
|
|
ep* at isapnp? # 3Com 3c509 Ethernet
|
|
fmv* at isapnp? # Fujitsu FMV-183
|
|
ne* at isapnp? # NE2000-compatible
|
|
|
|
# ISA serial interfaces
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
com1 at isa? port 0x2f8 irq 3
|
|
#com2 at isa? port 0x3e8 irq 9
|
|
#com3 at isa? port 0x2e8 irq 10
|
|
|
|
# ISA parallel printer interfaces
|
|
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
lpt1 at isa? port 0x278 irq 5
|
|
#lpt2 at isa? port 0x3bc
|
|
|
|
# ISA floppy
|
|
#fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
|
|
#fdc1 at isa? port 0x370 irq ? drq ?
|
|
#fd* at fdc? drive ? # the drives themselves
|
|
|
|
# ISA network interface
|
|
#ne0 at isa? port 0x280 irq 9
|
|
#ne1 at isa? port 0x300 irq 10
|
|
#ep* at isa? port ? irq ?
|
|
|
|
# The spkr driver provides a simple tone interface to the built in speaker.
|
|
spkr0 at pcppi? # PC speaker
|
|
|
|
dsrtc0 at isa? port 0x72 # Dallas RTC
|
|
|
|
# ISA Plug-and-Play audio devices
|
|
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
|
|
sb* at isapnp? # SoundBlaster-compatible audio
|
|
wss* at isapnp? # Windows Sound System
|
|
|
|
# OPL[23] FM syntheziers
|
|
opl* at ess?
|
|
opl* at sb?
|
|
|
|
# Audio support
|
|
audio* at ess?
|
|
audio* at sb?
|
|
audio* at wss?
|
|
|
|
# MPU 401 UARTs
|
|
#mpu* at sb?
|
|
|
|
# MIDI support
|
|
midi* at pcppi? # MIDI interface to the PC speaker
|
|
midi* at sb? # SB MPU401 port
|
|
midi* at opl? # OPL FM synth
|
|
#midi* at mpu? # MPU 401
|
|
|
|
# Joysticks
|
|
|
|
# ISA Plug-and-Play joysticks
|
|
joy* at isapnp? # Game ports (usually on audio cards)
|
|
|
|
# ISA joysticks. Probe is a little strange; add only if you have one.
|
|
#joy0 at isa? port 0x201
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 2 # concatenated/striped disk devices
|
|
#pseudo-device cgd 2 # cryptographic disk devices
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 4 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device sl 2 # Serial Line IP
|
|
pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device tb 1 # tablet line discipline
|
|
pseudo-device sequencer 1 # MIDI sequencer
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# mouse & keyboard multiplexor pseudo-devices
|
|
pseudo-device wsmux
|