NetBSD/sys/dev/ic/smc90cx6.c

993 lines
22 KiB
C

/* $NetBSD: smc90cx6.c,v 1.30 1999/05/18 23:55:44 thorpej Exp $ */
/*-
* Copyright (c) 1994, 1995, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Ignatios Souvatzis.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Chip core driver for the SMC90c26 / SMC90c56 (and SMC90c66 in '56
* compatibility mode) boards
*/
#define BAHSOFTCOPY /**/
#define BAHRETRANSMIT /**/
#include "opt_inet.h"
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_arc.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_inarp.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#include <sys/kernel.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/intr.h>
#include <machine/mtpr.h>
#include <dev/ic/smc90cx6reg.h>
#include <dev/ic/smc90cx6var.h>
/* these should be elsewhere */
#define ARC_MIN_LEN 1
#define ARC_MIN_FORBID_LEN 254
#define ARC_MAX_FORBID_LEN 256
#define ARC_MAX_LEN 508
#define ARC_ADDR_LEN 1
/* for watchdog timer. This should be more than enough. */
#define ARCTIMEOUT (5*IFNET_SLOWHZ)
/*
* This currently uses 2 bufs for tx, 2 for rx
*
* New rx protocol:
*
* rx has a fillcount variable. If fillcount > (NRXBUF-1),
* rx can be switched off from rx hard int.
* Else rx is restarted on the other receiver.
* rx soft int counts down. if it is == (NRXBUF-1), it restarts
* the receiver.
* To ensure packet ordering (we need that for 1201 later), we have a counter
* which is incremented modulo 256 on each receive and a per buffer
* variable, which is set to the counter on filling. The soft int can
* compare both values to determine the older packet.
*
* Transmit direction:
*
* bah_start checks tx_fillcount
* case 2: return
*
* else fill tx_act ^ 1 && inc tx_fillcount
*
* check tx_fillcount again.
* case 2: set IFF_OACTIVE to stop arc_output from filling us.
* case 1: start tx
*
* tint clears IFF_OCATIVE, decrements and checks tx_fillcount
* case 1: start tx on tx_act ^ 1, softcall bah_start
* case 0: softcall bah_start
*
* #define fill(i) get mbuf && copy mbuf to chip(i)
*/
void bah_init __P((struct bah_softc *));
void bah_reset __P((struct bah_softc *));
void bah_stop __P((struct bah_softc *));
void bah_start __P((struct ifnet *));
int bahintr __P((void *));
int bah_ioctl __P((struct ifnet *, unsigned long, caddr_t));
void bah_watchdog __P((struct ifnet *));
void bah_srint __P((void *vsc));
static void bah_tint __P((struct bah_softc *, int));
void bah_reconwatch(void *);
/* short notation */
#define GETREG(off) bus_space_read_1(bst_r, regs, (off))
#define PUTREG(off, v) bus_space_write_1(bst_r, regs, (off), (v))
#define GETMEM(off) bus_space_read_1(bst_m, mem, (off))
#define PUTMEM(off, v) bus_space_write_1(bst_m, mem, (off), (v))
void
bah_attach_subr(sc)
struct bah_softc *sc;
{
struct ifnet *ifp = &sc->sc_arccom.ac_if;
int s;
u_int8_t linkaddress;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_tag_t bst_m = sc->sc_bst_m;
bus_space_handle_t regs = sc->sc_regs;
bus_space_handle_t mem = sc->sc_mem;
#if (defined(BAH_DEBUG) && (BAH_DEBUG > 2))
printf("\n%s: attach(0x%x, 0x%x, 0x%x)\n",
sc->sc_dev.dv_xname, parent, self, aux);
#endif
s = splhigh();
/*
* read the arcnet address from the board
*/
(*sc->sc_reset)(sc, 1);
do {
delay(200);
} while (!(GETREG(BAHSTAT) & BAH_POR));
linkaddress = GETMEM(BAHMACOFF);
printf(": link addr 0x%02x(%d)\n", linkaddress, linkaddress);
/* clear the int mask... */
sc->sc_intmask = 0;
PUTREG(BAHSTAT, 0);
PUTREG(BAHCMD, BAH_CONF(CONF_LONG));
PUTREG(BAHCMD, BAH_CLR(CLR_POR|CLR_RECONFIG));
sc->sc_recontime = sc->sc_reconcount = 0;
/* and reenable kernel int level */
splx(s);
/*
* set interface to stopped condition (reset)
*/
bah_stop(sc);
bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
ifp->if_softc = sc;
ifp->if_start = bah_start;
ifp->if_ioctl = bah_ioctl;
ifp->if_timer = 0;
ifp->if_watchdog = bah_watchdog;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
ifp->if_mtu = ARCMTU;
if_attach(ifp);
arc_ifattach(ifp, linkaddress);
#if NBPFILTER > 0
bpfattach(&ifp->if_bpf, ifp, DLT_ARCNET, ARC_HDRLEN);
#endif
#ifdef BAHSOFTCOPY
sc->sc_rxcookie = softintr_establish(IPL_SOFTNET, bah_srint, sc);
sc->sc_txcookie = softintr_establish(IPL_SOFTNET,
(void (*) __P((void *)))bah_start, ifp);
#endif
}
/*
* Initialize device
*
*/
void
bah_init(sc)
struct bah_softc *sc;
{
struct ifnet *ifp;
int s;
ifp = &sc->sc_arccom.ac_if;
if ((ifp->if_flags & IFF_RUNNING) == 0) {
s = splnet();
ifp->if_flags |= IFF_RUNNING;
bah_reset(sc);
bah_start(ifp);
splx(s);
}
}
/*
* Reset the interface...
*
* this assumes that it is called inside a critical section...
*
*/
void
bah_reset(sc)
struct bah_softc *sc;
{
struct ifnet *ifp;
int linkaddress;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_tag_t bst_m = sc->sc_bst_m;
bus_space_handle_t regs = sc->sc_regs;
bus_space_handle_t mem = sc->sc_mem;
ifp = &sc->sc_arccom.ac_if;
#ifdef BAH_DEBUG
printf("%s: reset\n", sc->sc_dev.dv_xname);
#endif
/* stop and restart hardware */
(*sc->sc_reset)(sc, 1);
do {
DELAY(200);
} while (!(GETREG(BAHSTAT) & BAH_POR));
linkaddress = GETMEM(BAHMACOFF);
#if defined(BAH_DEBUG) && (BAH_DEBUG > 2)
printf("%s: reset: card reset, link addr = 0x%02x (%ld)\n",
sc->sc_dev.dv_xname, linkaddress, linkaddress);
#endif
/* tell the routing level about the (possibly changed) link address */
arc_ifattach(ifp, linkaddress);
/* POR is NMI, but we need it below: */
sc->sc_intmask = BAH_RECON|BAH_POR;
PUTREG(BAHSTAT, sc->sc_intmask);
PUTREG(BAHCMD, BAH_CONF(CONF_LONG));
#ifdef BAH_DEBUG
printf("%s: reset: chip configured, status=0x%02x\n",
sc->sc_dev.dv_xname, GETREG(BAHSTAT));
#endif
PUTREG(BAHCMD, BAH_CLR(CLR_POR|CLR_RECONFIG));
#ifdef BAH_DEBUG
printf("%s: reset: bits cleared, status=0x%02x\n",
sc->sc_dev.dv_xname, GETREG(BAHSTAT);
#endif
sc->sc_reconcount_excessive = ARC_EXCESSIVE_RECONS;
/* start receiver */
sc->sc_intmask |= BAH_RI;
sc->sc_rx_fillcount = 0;
sc->sc_rx_act = 2;
PUTREG(BAHCMD, BAH_RXBC(2));
PUTREG(BAHSTAT, sc->sc_intmask);
#ifdef BAH_DEBUG
printf("%s: reset: started receiver, status=0x%02x\n",
sc->sc_dev.dv_xname, GETREG(BAHSTAT);
#endif
/* and init transmitter status */
sc->sc_tx_act = 0;
sc->sc_tx_fillcount = 0;
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
bah_start(ifp);
}
/*
* Take interface offline
*/
void
bah_stop(sc)
struct bah_softc *sc;
{
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_handle_t regs = sc->sc_regs;
/* Stop the interrupts */
PUTREG(BAHSTAT, 0);
/* Stop the interface */
(*sc->sc_reset)(sc, 0);
/* Stop watchdog timer */
sc->sc_arccom.ac_if.if_timer = 0;
}
/*
* Start output on interface. Get another datagram to send
* off the interface queue, and copy it to the
* interface becore starting the output
*
* this assumes that it is called inside a critical section...
* XXX hm... does it still?
*
*/
void
bah_start(ifp)
struct ifnet *ifp;
{
struct bah_softc *sc = ifp->if_softc;
struct mbuf *m,*mp;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_handle_t regs = sc->sc_regs;
bus_space_tag_t bst_m = sc->sc_bst_m;
bus_space_handle_t mem = sc->sc_mem;
int bah_ram_ptr;
int len, tlen, offset, s, buffer;
#ifdef BAHTIMINGS
u_long copystart, lencopy, perbyte;
#endif
#if defined(BAH_DEBUG) && (BAH_DEBUG > 3)
printf("%s: start(0x%x)\n", sc->sc_dev.dv_xname, ifp);
#endif
if ((ifp->if_flags & IFF_RUNNING) == 0)
return;
s = splnet();
if (sc->sc_tx_fillcount >= 2) {
splx(s);
return;
}
IF_DEQUEUE(&ifp->if_snd, m);
buffer = sc->sc_tx_act ^ 1;
splx(s);
if (m == 0)
return;
#if NBPFILTER > 0
/*
* If bpf is listening on this interface, let it
* see the packet before we commit it to the wire
*
* (can't give the copy in A2060 card RAM to bpf, because
* that RAM is just accessed as on every other byte)
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
#ifdef BAH_DEBUG
m = m_pullup(m, 3); /* gcc does structure padding */
printf("%s: start: filling %ld from %ld to %ld type %ld\n",
sc->sc_dev.dv_xname, buffer, mtod(m, u_char *)[0],
mtod(m, u_char *)[1], mtod(m, u_char *)[2]);
#else
m = m_pullup(m, 2);
#endif
bah_ram_ptr = buffer*512;
/* write the addresses to RAM and throw them away */
/*
* Hardware does this: Yet Another Microsecond Saved.
* (btw, timing code says usually 2 microseconds)
* PUTMEM(bah_ram_ptr + 0, mtod(m, u_char *)[0]);
*/
PUTMEM(bah_ram_ptr + 1, mtod(m, u_char *)[1]);
m_adj(m, 2);
/* get total length left at this point */
tlen = m->m_pkthdr.len;
if (tlen < ARC_MIN_FORBID_LEN) {
offset = 256 - tlen;
PUTMEM(bah_ram_ptr + 2, offset);
} else {
PUTMEM(bah_ram_ptr + 2, 0);
if (tlen <= ARC_MAX_FORBID_LEN)
offset = 255; /* !!! */
else {
if (tlen > ARC_MAX_LEN)
tlen = ARC_MAX_LEN;
offset = 512 - tlen;
}
PUTMEM(bah_ram_ptr + 3, offset);
}
bah_ram_ptr += offset;
/* lets loop through the mbuf chain */
for (mp = m; mp; mp = mp->m_next) {
if ((len = mp->m_len)) { /* YAMS */
bus_space_write_region_1(bst_m, mem, bah_ram_ptr,
mtod(mp, caddr_t), len);
bah_ram_ptr += len;
}
}
sc->sc_broadcast[buffer] = (m->m_flags & M_BCAST) != 0;
sc->sc_retransmits[buffer] = (m->m_flags & M_BCAST) ? 1 : 5;
/* actually transmit the packet */
s = splnet();
if (++sc->sc_tx_fillcount > 1) {
/*
* We are filled up to the rim. No more bufs for the moment,
* please.
*/
ifp->if_flags |= IFF_OACTIVE;
} else {
#ifdef BAH_DEBUG
printf("%s: start: starting transmitter on buffer %d\n",
sc->sc_dev.dv_xname, buffer);
#endif
/* Transmitter was off, start it */
sc->sc_tx_act = buffer;
/*
* We still can accept another buf, so don't:
* ifp->if_flags |= IFF_OACTIVE;
*/
sc->sc_intmask |= BAH_TA;
PUTREG(BAHCMD, BAH_TX(buffer));
PUTREG(BAHSTAT, sc->sc_intmask);
sc->sc_arccom.ac_if.if_timer = ARCTIMEOUT;
}
splx(s);
m_freem(m);
/*
* After 10 times reading the docs, I realized
* that in the case the receiver NAKs the buffer request,
* the hardware retries till shutdown.
* This is integrated now in the code above.
*/
return;
}
/*
* Arcnet interface receiver soft interrupt:
* get the stuff out of any filled buffer we find.
*/
void
bah_srint(vsc)
void *vsc;
{
struct bah_softc *sc = (struct bah_softc *)vsc;
int buffer, len, len1, amount, offset, s, type;
int bah_ram_ptr;
struct mbuf *m, *dst, *head;
struct arc_header *ah;
struct ifnet *ifp;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_tag_t bst_m = sc->sc_bst_m;
bus_space_handle_t regs = sc->sc_regs;
bus_space_handle_t mem = sc->sc_mem;
ifp = &sc->sc_arccom.ac_if;
head = 0;
s = splnet();
buffer = sc->sc_rx_act ^ 1;
splx(s);
/* Allocate header mbuf */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
/*
* in case s.th. goes wrong with mem, drop it
* to make sure the receiver can be started again
* count it as input error (we dont have any other
* detectable)
*/
ifp->if_ierrors++;
goto cleanup;
}
m->m_pkthdr.rcvif = ifp;
/*
* Align so that IP packet will be longword aligned. Here we
* assume that m_data of new packet is longword aligned.
* When implementing PHDS, we might have to change it to 2,
* (2*sizeof(ulong) - ARC_HDRNEWLEN)), packet type dependent.
*/
bah_ram_ptr = buffer*512;
offset = GETMEM(bah_ram_ptr + 2);
if (offset)
len = 256 - offset;
else {
offset = GETMEM(bah_ram_ptr + 3);
len = 512 - offset;
}
type = GETMEM(bah_ram_ptr + offset);
m->m_data += 1 + arc_isphds(type);
head = m;
ah = mtod(head, struct arc_header *);
ah->arc_shost = GETMEM(bah_ram_ptr + 0);
ah->arc_dhost = GETMEM(bah_ram_ptr + 1);
m->m_pkthdr.len = len+2; /* whole packet length */
m->m_len = 2; /* mbuf filled with ARCnet addresses */
bah_ram_ptr += offset; /* ram buffer continues there */
while (len > 0) {
len1 = len;
amount = M_TRAILINGSPACE(m);
if (amount == 0) {
dst = m;
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
ifp->if_ierrors++;
goto cleanup;
}
if (len1 >= MINCLSIZE)
MCLGET(m, M_DONTWAIT);
m->m_len = 0;
dst->m_next = m;
amount = M_TRAILINGSPACE(m);
}
if (amount < len1)
len1 = amount;
bus_space_read_region_1(bst_m, mem, bah_ram_ptr,
mtod(m, u_char *) + m->m_len, len1);
m->m_len += len1;
bah_ram_ptr += len1;
len -= len1;
}
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, head);
#endif
(*sc->sc_arccom.ac_if.if_input)(&sc->sc_arccom.ac_if, head);
head = NULL;
ifp->if_ipackets++;
cleanup:
if (head != NULL)
m_freem(head);
/* mark buffer as invalid by source id 0 */
bus_space_write_1(bst_m, mem, buffer*512, 0);
s = splnet();
if (--sc->sc_rx_fillcount == 2 - 1) {
/* was off, restart it on buffer just emptied */
sc->sc_rx_act = buffer;
sc->sc_intmask |= BAH_RI;
/* this also clears the RI flag interupt: */
PUTREG(BAHCMD, BAH_RXBC(buffer));
PUTREG(BAHSTAT, sc->sc_intmask);
#ifdef BAH_DEBUG
printf("%s: srint: restarted rx on buf %ld\n",
sc->sc_dev.dv_xname, buffer);
#endif
}
splx(s);
}
__inline static void
bah_tint(sc, isr)
struct bah_softc *sc;
int isr;
{
struct ifnet *ifp;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_handle_t regs = sc->sc_regs;
int buffer;
#ifdef BAHTIMINGS
int clknow;
#endif
ifp = &(sc->sc_arccom.ac_if);
buffer = sc->sc_tx_act;
/*
* retransmit code:
* Normal situtations first for fast path:
* If acknowledgement received ok or broadcast, we're ok.
* else if
*/
if (isr & BAH_TMA || sc->sc_broadcast[buffer])
sc->sc_arccom.ac_if.if_opackets++;
#ifdef BAHRETRANSMIT
else if (ifp->if_flags & IFF_LINK2 && ifp->if_timer > 0
&& --sc->sc_retransmits[buffer] > 0) {
/* retransmit same buffer */
PUTREG(BAHCMD, BAH_TX(buffer));
return;
}
#endif
else
ifp->if_oerrors++;
/* We know we can accept another buffer at this point. */
ifp->if_flags &= ~IFF_OACTIVE;
if (--sc->sc_tx_fillcount > 0) {
/*
* start tx on other buffer.
* This also clears the int flag
*/
buffer ^= 1;
sc->sc_tx_act = buffer;
/*
* already given:
* sc->sc_intmask |= BAH_TA;
* PUTREG(BAHSTAT, sc->sc_intmask);
*/
PUTREG(BAHCMD, BAH_TX(buffer));
/* init watchdog timer */
ifp->if_timer = ARCTIMEOUT;
#if defined(BAH_DEBUG) && (BAH_DEBUG > 1)
printf("%s: tint: starting tx on buffer %d, status 0x%02x\n",
sc->sc_dev.dv_xname, buffer, GETREG(BAHSTAT));
#endif
} else {
/* have to disable TX interrupt */
sc->sc_intmask &= ~BAH_TA;
PUTREG(BAHSTAT, sc->sc_intmask);
/* ... and watchdog timer */
ifp->if_timer = 0;
#ifdef BAH_DEBUG
printf("%s: tint: no more buffers to send, status 0x%02x\n",
sc->sc_dev.dv_xname, GETREG(BAHSTAT));
#endif
}
/* XXXX TODO */
#ifdef BAHSOFTCOPY
/* schedule soft int to fill a new buffer for us */
softintr_schedule(sc->sc_txcookie);
#else
/* call it directly */
bah_start(ifp);
#endif
}
/*
* Our interrupt routine
*/
int
bahintr(arg)
void *arg;
{
struct bah_softc *sc = arg;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_tag_t bst_m = sc->sc_bst_m;
bus_space_handle_t regs = sc->sc_regs;
bus_space_handle_t mem = sc->sc_mem;
u_char isr, maskedisr;
int buffer;
u_long newsec;
isr = GETREG(BAHSTAT);
maskedisr = isr & sc->sc_intmask;
if (!maskedisr)
return (0);
do {
#if defined(BAH_DEBUG) && (BAH_DEBUG>1)
printf("%s: intr: status 0x%02x, intmask 0x%02x\n",
sc->sc_dev.dv_xname, isr, sc->sc_intmask);
#endif
if (maskedisr & BAH_POR) {
/*
* XXX We should never see this. Don't bother to store
* the address.
* sc->sc_arccom.ac_anaddr = GETMEM(BAHMACOFF);
*/
PUTREG(BAHCMD, BAH_CLR(CLR_POR));
log(LOG_WARNING,
"%s: intr: got spurious power on reset int\n",
sc->sc_dev.dv_xname);
}
if (maskedisr & BAH_RECON) {
/*
* we dont need to:
* PUTREG(BAHCMD, BAH_CONF(CONF_LONG));
*/
PUTREG(BAHCMD, BAH_CLR(CLR_RECONFIG));
sc->sc_arccom.ac_if.if_collisions++;
/*
* If less than 2 seconds per reconfig:
* If ARC_EXCESSIVE_RECONFIGS
* since last burst, complain and set treshold for
* warnings to ARC_EXCESSIVE_RECONS_REWARN.
*
* This allows for, e.g., new stations on the cable, or
* cable switching as long as it is over after
* (normally) 16 seconds.
*
* XXX TODO: check timeout bits in status word and
* double time if necessary.
*/
untimeout(bah_reconwatch, (void *)sc);
newsec = time.tv_sec;
if ((newsec - sc->sc_recontime <= 2) &&
(++sc->sc_reconcount == ARC_EXCESSIVE_RECONS)) {
log(LOG_WARNING,
"%s: excessive token losses, "
"cable problem?\n", sc->sc_dev.dv_xname);
}
sc->sc_recontime = newsec;
timeout(bah_reconwatch, (void *)sc, 15*hz);
}
if (maskedisr & BAH_RI) {
#if defined(BAH_DEBUG) && (BAH_DEBUG > 1)
printf("%s: intr: hard rint, act %ld\n",
sc->sc_dev.dv_xname, sc->sc_rx_act);
#endif
buffer = sc->sc_rx_act;
/* look if buffer is marked invalid: */
if (GETMEM(buffer*512) == 0) {
/*
* invalid marked buffer (or illegally
* configured sender)
*/
log(LOG_WARNING,
"%s: spurious RX interupt or sender 0 "
" (ignored)\n", sc->sc_dev.dv_xname);
/*
* restart receiver on same buffer.
* XXX maybe better reset interface?
*/
PUTREG(BAHCMD, BAH_RXBC(buffer));
} else {
if (++sc->sc_rx_fillcount > 1) {
sc->sc_intmask &= ~BAH_RI;
PUTREG(BAHSTAT, sc->sc_intmask);
} else {
buffer ^= 1;
sc->sc_rx_act = buffer;
/*
* Start receiver on other receive
* buffer. This also clears the RI
* interupt flag.
*/
PUTREG(BAHCMD, BAH_RXBC(buffer));
/* in RX intr, so mask is ok for RX */
#ifdef BAH_DEBUG
printf("%s: strt rx for buf %ld, "
"stat 0x%02x\n",
sc->sc_dev.dv_xname, sc->sc_rx_act,
GETREG(BAHSTAT);
#endif
}
#ifdef BAHSOFTCOPY
/*
* this one starts a soft int to copy out
* of the hw
*/
softintr_schedule(sc->sc_rxcookie);
#else
/* this one does the copy here */
bah_srint(sc);
#endif
}
}
if (maskedisr & BAH_TA) {
bah_tint(sc, isr);
}
isr = GETREG(BAHSTAT);
maskedisr = isr & sc->sc_intmask;
} while (maskedisr);
return (1);
}
void
bah_reconwatch(arg)
void *arg;
{
struct bah_softc *sc = arg;
if (sc->sc_reconcount >= ARC_EXCESSIVE_RECONS) {
sc->sc_reconcount = 0;
log(LOG_WARNING, "%s: token valid again.\n",
sc->sc_dev.dv_xname);
}
sc->sc_reconcount = 0;
}
/*
* Process an ioctl request.
* This code needs some work - it looks pretty ugly.
*/
int
bah_ioctl(ifp, command, data)
register struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct bah_softc *sc;
register struct ifaddr *ifa;
struct ifreq *ifr;
int s, error;
error = 0;
sc = ifp->if_softc;
ifa = (struct ifaddr *)data;
ifr = (struct ifreq *)data;
s = splnet();
#if defined(BAH_DEBUG) && (BAH_DEBUG > 2)
printf("%s: ioctl() called, cmd = 0x%x\n",
sc->sc_dev.dv_xname, command);
#endif
switch (command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
bah_init(sc);
arp_ifinit(ifp, ifa);
break;
#endif
default:
bah_init(sc);
break;
}
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_flags & IFF_RUNNING) != 0) {
/*
* If interface is marked down and it is running,
* then stop it.
*/
bah_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_flags & IFF_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
bah_init(sc);
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (ifr->ifr_addr.sa_family == AF_INET)
error = 0;
else
error = EAFNOSUPPORT;
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
/*
* watchdog routine for transmitter.
*
* We need this, because else a receiver whose hardware is alive, but whose
* software has not enabled the Receiver, would make our hardware wait forever
* Discovered this after 20 times reading the docs.
*
* Only thing we do is disable transmitter. We'll get an transmit timeout,
* and the int handler will have to decide not to retransmit (in case
* retransmission is implemented).
*
* This one assumes being called inside splnet()
*/
void
bah_watchdog(ifp)
struct ifnet *ifp;
{
struct bah_softc *sc = ifp->if_softc;
bus_space_tag_t bst_r = sc->sc_bst_r;
bus_space_handle_t regs = sc->sc_regs;
PUTREG(BAHCMD, BAH_TXDIS);
return;
}