NetBSD/sys/dev/ata/satareg.h

164 lines
6.4 KiB
C

/* $NetBSD: satareg.h,v 1.4 2005/12/11 12:21:14 christos Exp $ */
/*-
* Copyright (c) 2003 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_ATA_SATAREG_H_
#define _DEV_ATA_SATAREG_H_
/*
* Serial ATA register definitions.
*
* Reference:
*
* Serial ATA: High Speed Serialized AT Attachment
* Revision 1.0 29-August-2001
* Serial ATA Working Group
*/
/*
* SStatus (SCR0) --
* Serial ATA interface status register
*/
/*
* The DET value indicates the interface device detection and
* PHY state.
*/
#define SStatus_DET_NODEV (0x0 << 0) /* no device connected */
#define SStatus_DET_DEV_NE (0x1 << 0) /* device, but PHY comm not
established */
#define SStatus_DET_DEV (0x3 << 0) /* device, PHY comm
established */
#define SStatus_DET_OFFLINE (0x4 << 0) /* PHY in offline mode */
#define SStatus_DET_mask (0xf << 0)
#define SStatus_DET_shift 0
/*
* The SPD value indicates the negotiated interface communication
* speed established.
*/
#define SStatus_SPD_NONE (0x0 << 4) /* no negotiated speed */
#define SStatus_SPD_G1 (0x1 << 4) /* Generation 1 (1.5Gb/s) */
#define SStatus_SPD_G2 (0x2 << 4) /* Generation 2 (3.0Gb/s) */
#define SStatus_SPD_mask (0xf << 4)
#define SStatus_SPD_shift 4
/*
* The IPM value indicates the current interface power managemnt
* state.
*/
#define SStatus_IPM_NODEV (0x0 << 8) /* no device connected */
#define SStatus_IPM_ACTIVE (0x1 << 8) /* ACTIVE state */
#define SStatus_IPM_PARTIAL (0x2 << 8) /* PARTIAL pm state */
#define SStatus_IPM_SLUMBER (0x6 << 8) /* SLUMBER pm state */
#define SStatus_IPM_mask (0xf << 8)
#define SStatus_IPM_shift 8
/*
* SError (SCR1) --
* Serial ATA interface error register
*/
#define SError_ERR_I (1U << 0) /* Recovered data integrity
error */
#define SError_ERR_M (1U << 1) /* Recovered communications
error */
#define SError_ERR_T (1U << 8) /* Non-recovered transient
data integrity error */
#define SError_ERR_C (1U << 9) /* Non-recovered persistent
communication or data
integrity error */
#define SError_ERR_P (1U << 10) /* Protocol error */
#define SError_ERR_E (1U << 11) /* Internal error */
#define SError_DIAG_N (1U << 16) /* PhyRdy change */
#define SError_DIAG_I (1U << 17) /* PHY internal error */
#define SError_DIAG_W (1U << 18) /* Comm Wake */
#define SError_DIAG_B (1U << 19) /* 10b to 8b decode error */
#define SError_DIAG_D (1U << 20) /* Disparity error */
#define SError_DIAG_C (1U << 21) /* CRC error */
#define SError_DIAG_H (1U << 22) /* Handshake error */
#define SError_DIAG_S (1U << 23) /* Link sequence error */
#define SError_DIAG_T (1U << 24) /* Transport state transition
error */
#define SError_DIAG_F (1U << 25) /* Unrecognized FIS type */
#define SError_DIAG_X (1U << 26) /* Device Exchanged */
/*
* SControl (SCR2) --
* Serial ATA interface control register
*/
/*
* The DET field controls the host adapter device detection
* and interface initialization.
*/
#define SControl_DET_NONE (0x0 << 0) /* No device detection or
initialization action
requested */
#define SControl_DET_INIT (0x1 << 0) /* Initialize interface
communication (equiv
of a hard reset) */
#define SControl_DET_DISABLE (0x4 << 0) /* disable interface and
take PHY offline */
/*
* The SPD field represents the highest allowed communication
* speed the interface is allowed to negotiate when communication
* is established.
*/
#define SControl_SPD_ANY (0x0 << 4) /* No restrictions */
#define SControl_SPD_G1 (0x1 << 4) /* Generation 1 (1.5Gb/s) */
#define SControl_SPD_G2 (0x2 << 4) /* Generation 2 (3.0Gb/s) */
/*
* The IPM field represents the enabled interface power management
* states that can be invoked via the Serial ATA interface power
* management capabilities.
*/
#define SControl_IPM_ANY (0x0 << 8) /* No restrictions */
#define SControl_IPM_NOPARTIAL (0x1 << 8) /* PARTIAL disabled */
#define SControl_IPM_NOSLUMBER (0x2 << 8) /* SLUMBER disabled */
#define SControl_IPM_NONE (0x3 << 8) /* No power management */
/*
* The SPM field selects a power management state. A non-zero
* value written to this field causes initiation of the selected
* power management state.
*/
#define SControl_SPM_PARTIAL (0x1 << 12) /* transition to PARTIAL */
#define SControl_SPM_SLUMBER (0x2 << 12) /* transition to SLUBMER */
#define SControl_SPM_ComWake (0x4 << 12) /* transition from PM */
/*
* The PMP field identifies the selected Port Multiplier Port
* for accessing the SActive register.
*/
#define SControl_PMP(x) ((x) << 16)
#endif /* _DEV_ATA_SATAREG_H_ */