142dd55d17
To my knowledge this feature is no longer supported at the moment. The manual page for wsdisplay(4) should probably also be updated to reflect this situation.
640 lines
21 KiB
Plaintext
640 lines
21 KiB
Plaintext
# $NetBSD: MMNET_GENERIC,v 1.22 2015/10/25 22:48:23 khorben Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/evbarm/conf/std.mmnet"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.22 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# CPU support.
|
|
options CPU_ARM9E
|
|
makeoptions CPUFLAGS="-mtune=arm926ej-s -mcpu=arm926ej-s"
|
|
|
|
# CPU-related options.
|
|
#options MATH_EMULATE # floating point emulation
|
|
|
|
# doesn't work with MP just yet..
|
|
#options PERFCTRS # performance-monitoring counters support
|
|
|
|
#options MULTIBOOT # Multiboot support (see multiboot(8))
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
# I/O address. see console(4) for details.
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
# you don't want the option below ON iff you are using the
|
|
# serial console option of the new boot strap code.
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
# Standard system options
|
|
|
|
#options INSECURE # disable kernel security levels - X needs this
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
options SYSVSHM # System V-like memory sharing
|
|
|
|
#options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Beep when it is safe to power down the system (requires sysbeep)
|
|
#options BEEP_ONHALT
|
|
# Some tunable details of the above feature (default values used below)
|
|
#options BEEP_ONHALT_COUNT=3 # Times to beep
|
|
#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
|
|
#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Likely stable but not yet the default.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
# Diagnostic/debugging support options
|
|
options DIAGNOSTIC # expensive kernel consistency checks
|
|
options DEBUG # expensive debugging checks/support
|
|
options DDB # in-kernel debugger
|
|
options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
makeoptions DEBUG="-g" # compile full symbol table
|
|
makeoptions COPTS="-Os"
|
|
makeoptions COPY_SYMTAB=1
|
|
#options SYSCALL_STATS # per syscall counts
|
|
#options SYSCALL_TIMES # per syscall times
|
|
#options SYSCALL_TIMES_HASCOUNTER # use 'broken' rdtsc (soekris)
|
|
|
|
# Compatibility options
|
|
options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
|
|
#options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
|
|
#options COMPAT_09 # NetBSD 0.9,
|
|
#options COMPAT_10 # NetBSD 1.0,
|
|
#options COMPAT_11 # NetBSD 1.1,
|
|
#options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI)
|
|
#options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI)
|
|
#options COMPAT_14 # NetBSD 1.4,
|
|
#options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_16 # NetBSD 1.6,
|
|
options COMPAT_20 # NetBSD 2.0, and
|
|
options COMPAT_30 # NetBSD 3.0 binary compatibility
|
|
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
|
|
#options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
#options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
|
|
#options COMPAT_SVR4 # binary compatibility with SVR4
|
|
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
|
|
#options COMPAT_MACH # binary compatibility with Mach binaries
|
|
#options COMPAT_DARWIN # binary compatibility with Darwin binaries
|
|
#options EXEC_MACHO # exec MACH-O binaries
|
|
#options COMPAT_NDIS # NDIS network driver
|
|
#options COMPAT_PECOFF # kernel support to run Win32 apps
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
#file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
#file-system PROCFS # /proc
|
|
#file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
|
file-system PTYFS # /dev/ptm support
|
|
file-system TMPFS # Efficient memory file-system
|
|
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
|
|
|
# File system options
|
|
#options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
|
|
# It is not recommended for general use.
|
|
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
|
#options NFSSERVER # Network File System server
|
|
options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
#options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options PIM # Protocol Independent Multicast
|
|
#options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
options IPFILTER_LOOKUP # ippool(8) support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
#
|
|
# wscons options
|
|
#
|
|
# builtin terminal emulations
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
#options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
|
|
#options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
|
|
#options WS_DEFAULT_FG=WSCOL_WHITE
|
|
#options WS_DEFAULT_BG=WSCOL_BLACK
|
|
#options WS_DEFAULT_COLATTR="(0)"
|
|
#options WS_DEFAULT_MONOATTR="(0)"
|
|
#options WS_KERNEL_FG=WSCOL_GREEN
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
#options WS_KERNEL_COLATTR=""
|
|
#options WS_KERNEL_MONOATTR=""
|
|
# customization of console border color
|
|
#options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8)
|
|
#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color
|
|
# compatibility to other console drivers
|
|
#options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
#options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
|
|
#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode
|
|
#options WSKBD_USONLY # strip off non-US keymaps
|
|
# don't attach pckbd as the console if no PS/2 keyboard is found
|
|
#options PCKBD_CNATTACH_MAY_FAIL
|
|
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
|
|
#options UKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for ukbd driver
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
# use a large software cursor that doesn't blink
|
|
#options PCDISPLAY_SOFTCURSOR
|
|
# modify the screen type of the console; defaults to "80x25"
|
|
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
|
|
# work around a hardware bug that loaded fonts don't work; found on ATI cards
|
|
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
|
|
# console scrolling support.
|
|
#options WSDISPLAY_SCROLLSUPPORT
|
|
# enable VGA raster mode capable of displaying multilingual text on console
|
|
#options VGA_RASTERCONSOLE
|
|
# enable splash screen support; requires hw driver support
|
|
#options SPLASHSCREEN
|
|
|
|
# Kernel root file system and dump configuration.
|
|
#config netbsd root on sd0c type ffs
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on ? type ?
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
|
|
cpu* at mainbus?
|
|
|
|
# Basic Bus Support
|
|
at91bus0 at mainbus? # AT91 bus
|
|
|
|
|
|
# Integrated peripherals:
|
|
# On-chip interrupt controller
|
|
at91aic0 at at91bus0 addr 0xfffff000 size 0x200
|
|
|
|
# On-chip timer
|
|
#at91st0 at at91bus0 addr 0xfffffd00 size 0x100 pid 1
|
|
at91tctmr0 at at91bus0 addr 0xfffa0000 size 0x40 pid 17
|
|
|
|
# On-chip debug UART
|
|
at91dbgu0 at at91bus0 addr 0xfffff200 size 0x200 pid 1
|
|
|
|
# On-chip UARTs
|
|
#at91usart0 at at91bus0 addr 0xfffc0000 size 0x4000 pid 6
|
|
#at91usart1 at at91bus0 addr 0xfffc4000 size 0x4000 pid 7
|
|
#at91usart2 at at91bus0 addr 0xfffc8000 size 0x4000 pid 8
|
|
#at91usart3 at at91bus0 addr 0xfffcc000 size 0x4000 pid 9
|
|
|
|
# On-chip ethernet
|
|
at91emac0 at at91bus0 addr 0xfffc4000 size 0x4000 pid 21
|
|
|
|
# General purpose I/O
|
|
at91pio0 at at91bus0 addr 0xfffff400 size 0x200 pid 2
|
|
at91pio1 at at91bus0 addr 0xfffff600 size 0x200 pid 3
|
|
at91pio2 at at91bus0 addr 0xfffff800 size 0x200 pid 4
|
|
gpio* at at91pio?
|
|
|
|
# On-chip CF interface
|
|
#at91cf0 at at91bus0 addr 0x50000000 size 0x900000 pid 4
|
|
#pcmcia0 at at91cf0
|
|
|
|
# On-chip USB 1.1
|
|
ohci0 at at91bus0 addr 0x00500000 size 0x100000 pid 20
|
|
|
|
# On-chip SPI
|
|
#at91spi0 at at91bus0 addr 0xfffe0000 size 0x4000 pid 13
|
|
#spi0 at at91spi0
|
|
#spi_obuf0 at spi0 slave 1
|
|
#gpio* at spi_obuf?
|
|
|
|
# On-chip I2C
|
|
at91twi0 at at91bus0 addr 0xfffac000 size 0x4000 pid 11
|
|
iic0 at at91twi?
|
|
#ds1672rtc* at iic0 addr 0x68
|
|
#seeprom* at iic0 addr 0x50 size 4096
|
|
|
|
# Hardware monitors
|
|
|
|
# AMD 768 and 8111 power/ACPI controllers
|
|
#dbcool* at iic? addr 0x2C # Unknown other motherboard(s)
|
|
#dbcool* at iic? addr 0x2D # Tyan S2881
|
|
#dbcool* at iic? addr 0x2E # Tyan S2882-D
|
|
|
|
# 1-Wire support
|
|
#gpioow* at gpio? offset 6 mask 0x1 # 1-wire bitbanging via gpio
|
|
#onewire* at gpioow?
|
|
|
|
# 1-Wire devices
|
|
#owtemp* at onewire? # Temperature sensors
|
|
|
|
# SCSI Controllers and Devices
|
|
|
|
# SCSI bus support
|
|
scsibus* at scsi?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
#st* at scsibus? target ? lun ? # SCSI tape drives
|
|
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
#ch* at scsibus? target ? lun ? # SCSI autochangers
|
|
#ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
|
|
#ss* at scsibus? target ? lun ? # SCSI scanners
|
|
#uk* at scsibus? target ? lun ? # SCSI unknown
|
|
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
|
|
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
|
|
# Miscellaneous mass storage devices
|
|
|
|
|
|
|
|
# Network Interfaces
|
|
|
|
# MII/PHY support
|
|
#acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
|
|
#amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
|
|
#bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
|
|
#brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
|
|
#ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs
|
|
#dmphy* at mii? phy ? # Davicom DM9101 PHYs
|
|
#exphy* at mii? phy ? # 3Com internal PHYs
|
|
#gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
|
|
#glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
|
|
#gphyter* at mii? phy ? # NS83861 Gig-E PHY
|
|
#icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
#igphy* at mii? phy ? # Intel IGP01E1000
|
|
#ikphy* at mii? phy ? # Intel 82563 PHYs
|
|
#inphy* at mii? phy ? # Intel 82555 PHYs
|
|
#iophy* at mii? phy ? # Intel 82553 PHYs
|
|
#lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
#makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
#nsphy* at mii? phy ? # NS83840 PHYs
|
|
#nsphyter* at mii? phy ? # NS83843 PHYs
|
|
#pnaphy* at mii? phy ? # generic HomePNA PHYs
|
|
#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
#rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
|
|
#rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
|
|
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
#tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
ukphy* at at91emac? phy ?
|
|
ukphy* at aue? phy ? # generic unknown PHYs
|
|
ukphy* at axe? phy ? # generic unknown PHYs
|
|
ukphy* at udav? phy ? # generic unknown PHYs
|
|
ukphy* at url? phy ? # generic unknown PHYs
|
|
#urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
|
|
|
|
|
|
# USB Controller and Devices
|
|
|
|
# USB bus support
|
|
usb* at ohci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB HID device
|
|
#uhidev* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mice
|
|
#ums* at uhidev? reportid ?
|
|
#wsmouse* at ums? mux 0
|
|
|
|
# USB eGalax touch-panel
|
|
#uep* at uhub? port ?
|
|
#wsmouse* at uep? mux 0
|
|
|
|
# USB Keyboards
|
|
#ukbd* at uhidev? reportid ?
|
|
#wskbd* at ukbd? console ? mux 1
|
|
|
|
# USB serial adapter
|
|
#ucycom* at uhidev? reportid ?
|
|
|
|
# USB Generic HID devices
|
|
#uhid* at uhidev? reportid ?
|
|
|
|
# USB Printer
|
|
#ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Modem
|
|
#umodem* at uhub? port ? configuration ?
|
|
#ucom* at umodem?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
wd* at umass?
|
|
|
|
# USB audio
|
|
#uaudio* at uhub? port ? configuration ?
|
|
|
|
# USB MIDI
|
|
#umidi* at uhub? port ? configuration ?
|
|
|
|
# USB IrDA
|
|
# USB-IrDA bridge spec
|
|
#uirda* at uhub? port ? configuration ? interface ?
|
|
#irframe* at uirda?
|
|
|
|
# SigmaTel STIr4200 USB/IrDA Bridge
|
|
#ustir* at uhub? port ?
|
|
#irframe* at ustir?
|
|
|
|
# USB Ethernet adapters
|
|
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
axe* at uhub? port ? # ASIX AX88172 based adapters
|
|
cdce* at uhub? port ? # CDC, Ethernet Networking Control Model
|
|
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
|
udav* at uhub? port ? # Davicom DM9601 based adapters
|
|
url* at uhub? port ? # Realtek RTL8150L based adapters
|
|
|
|
# USB 802.11 adapters
|
|
atu* at uhub? port ? # Atmel AT76C50XX based adapters
|
|
ural* at uhub? port ? # Ralink Technology RT2500USB 802.11a/b/g
|
|
rum* at uhub? port ? # Ralink Technology RT2501/RT2601 802.11a/b/g
|
|
|
|
# Prolific PL2301/PL2302 host-to-host adapter
|
|
upl* at uhub? port ?
|
|
|
|
# Serial adapters
|
|
ubsa* at uhub? port ? # Belkin serial adapter
|
|
ucom* at ubsa? portno ?
|
|
|
|
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
|
|
ucom* at uftdi? portno ?
|
|
|
|
#uipaq* at uhub? port ? # iPAQ PDAs
|
|
#ucom* at uipaq? portno ?
|
|
|
|
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
|
ucom* at umct? portno ?
|
|
|
|
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
ucom* at uplcom? portno ?
|
|
|
|
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
|
|
ucom* at uvscom? portno ?
|
|
|
|
# Diamond Multimedia Rio 500
|
|
#urio* at uhub? port ?
|
|
|
|
# USB Handspring Visor
|
|
#uvisor* at uhub? port ?
|
|
#ucom* at uvisor?
|
|
|
|
# Kyocera AIR-EDGE PHONE
|
|
#ukyopon* at uhub? port ?
|
|
#ucom* at ukyopon? portno ?
|
|
|
|
# USB scanners
|
|
#uscanner* at uhub? port ?
|
|
|
|
# USB scanners that use SCSI emulation, e.g., HP5300
|
|
#usscanner* at uhub? port ?
|
|
|
|
# Topfield TF5000PVR range of DVB recorders
|
|
#utoppy* at uhub? port ?
|
|
|
|
# Y@P firmware loader
|
|
#uyap* at uhub? port ?
|
|
|
|
# D-Link DSB-R100 USB radio
|
|
#udsbr* at uhub? port ?
|
|
#radio* at udsbr?
|
|
|
|
# USB Generic driver
|
|
#ugen* at uhub? port ?
|
|
# On ugen bulk endpoints, perform read-ahead and write-behind.
|
|
#options UGEN_BULK_RA_WB
|
|
|
|
|
|
# IrDA and Consumer Ir devices
|
|
|
|
# Toshiba Oboe
|
|
|
|
# Audio Devices
|
|
|
|
# Audio support
|
|
#audio* at audiobus?
|
|
|
|
# MIDI support
|
|
#midi* at midibus?
|
|
#midi* at pcppi? # MIDI interface to the PC speaker
|
|
|
|
|
|
|
|
# Bluetooth Controller and Device support
|
|
|
|
# Bluetooth PCMCIA Controllers
|
|
#bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A
|
|
|
|
# Bluetooth USB Controllers
|
|
#ubt* at uhub? port ? configuration ? interface ?
|
|
|
|
# Bluetooth Device Hub
|
|
#bthub* at bt3c?
|
|
#bthub* at ubt?
|
|
|
|
# Bluetooth HID support
|
|
#bthidev* at bthub?
|
|
|
|
# Bluetooth Mouse
|
|
#btms* at bthidev? reportid ?
|
|
#wsmouse* at btms? mux 0
|
|
|
|
# Bluetooth Keyboard
|
|
#btkbd* at bthidev? reportid ?
|
|
#wskbd* at btkbd? console ? mux 1
|
|
|
|
# Bluetooth Audio support
|
|
#btsco* at bthub?
|
|
|
|
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
#pseudo-device crypto # /dev/crypto device
|
|
#pseudo-device swcrypto # software crypto implementation
|
|
|
|
# disk/mass storage pseudo-devices
|
|
#pseudo-device ccd # concatenated/striped disk devices
|
|
#pseudo-device cgd # cryptographic disk devices
|
|
#pseudo-device raid # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
#pseudo-device fss # file system snapshot device
|
|
#pseudo-device putter # for puffs and pud
|
|
|
|
pseudo-device md # memory disk device (ramdisk)
|
|
#pseudo-device vnd # disk-like interface to files
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter # Berkeley packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp # Point-to-Point Protocol
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device sl # Serial Line IP
|
|
#pseudo-device strip # Starmode Radio IP (Metricom)
|
|
#pseudo-device irframetty # IrDA frame line discipline
|
|
#pseudo-device tap # virtual Ethernet
|
|
pseudo-device tun # network tunneling over tty
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
#pseudo-device vlan # IEEE 802.1q encapsulation
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
pseudo-device pf # PF packet filter
|
|
pseudo-device pflog # PF log if
|
|
# srt is EXPERIMENTAL
|
|
#pseudo-device srt # source-address-based routing
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device sequencer # MIDI sequencer
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device ksyms # /dev/ksyms
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda # coda minicache <-> venus comm.
|
|
|
|
# a pseudo device needed for SMBFS
|
|
#pseudo-device nsmb # experimental - SMB requester
|
|
|
|
# wscons pseudo-devices
|
|
#pseudo-device wsmux # mouse & keyboard multiplexor
|
|
#pseudo-device wsfont
|
|
|
|
#options FILEASSOC # fileassoc(9) - required for Veriexec
|
|
|
|
# Veriexec
|
|
#pseudo-device veriexec
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|
|
|
|
options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|