NetBSD/sys/arch/evbarm/conf/CUBIEBOARD
2015-12-19 13:28:22 +00:00

192 lines
3.9 KiB
Plaintext

#
# $NetBSD: CUBIEBOARD,v 1.45 2015/12/19 13:28:22 skrll Exp $
#
# CUBIEBOARD -- Allwinner A10/A20 Eval Board Kernel
#
include "arch/evbarm/conf/std.awin"
# CPU options
no makeoptions BOARDTYPE
makeoptions BOARDTYPE="cubieboard"
no makeoptions CPUFLAGS
makeoptions CPUFLAGS="-mcpu=cortex-a7 -mfpu=neon"
#options UVMHIST,UVMHIST_PRINT
options ALLWINNER_A10
options ALLWINNER_A20
options AWIN_CONSOLE_EARLY
include "arch/evbarm/conf/GENERIC.common"
# u-boot images contain kernels w/o any symbols, so we need to copy
# them over to kernel text
makeoptions COPY_SYMTAB=1
## USB Debugging options
options USB_DEBUG
options EHCI_DEBUG
options OHCI_DEBUG
options UHUB_DEBUG
# Valid options for BOOT_ARGS:
# single Boot to single user only
# kdb Give control to kernel debugger
# ask Ask for file name to reboot from
# memorydisk=<n> Set memorydisk size to <n> KB
# quiet Show aprint_naive output
# verbose Show aprint_normal and aprint_verbose output
options BOOT_ARGS="\"\""
config netbsd root on ? type ?
# The main bus device
mainbus0 at root
# CPU(s)
options MULTIPROCESSOR
#options __HAVE_PREEMPTION
cpu* at mainbus?
# Specify the memory size in megabytes (optional).
#options MEMSIZE=256
#options MEMSIZE=128
# A7 core devices
armperiph0 at mainbus?
armgic0 at armperiph? # Interrupt Controller
armgtmr0 at armperiph? # ARM Generic Timer
# SoC I/O
awinio0 at mainbus?
# SD/MMC controllers
awinmmc0 at awinio0 port 0
sdmmc* at awinmmc?
ld* at sdmmc?
# NAND controller
awinnand0 at awinio0
# NAND layer
nand0 at nandbus?
# use the bad block table
options NAND_BBT
# Define flash partitions for board
flash0 at nand0 offset 0x000000 size 0x080000 readonly 1 # X-Loader
flash1 at nand0 offset 0x080000 size 0x1e0000 readonly 1 # U-Boot
flash2 at nand0 offset 0x260000 size 0x020000 readonly 1 # UB Env
flash3 at nand0 offset 0x280000 size 0x400000 # kernel
flash4 at nand0 offset 0x680000 size 0 # filesystem
# Interrupt Controller
awinicu0 at awinio0
# DMA Controller
awindma0 at awinio0
# 64-bit counter
awincnt0 at awinio0
# GPIO Controller
awingpio0 at awinio0
gpio* at awingpio?
# System Control Module
#awinscm0 at awinio?
# I2C Controller
awiniic0 at awinio? port 0
#awiniic* at awinio? port ?
iic* at awiniic?
axp20x0 at iic0 addr 0x34 # AXP209 Power Management Unit
# On-board 16550 UARTs
com0 at awinio? port 0 # UART0 (console)
options CONADDR=0x01c28000, CONSPEED=115200
# Consumer IR
awinir0 at awinio?
cir0 at awinir0
# Operating System Timer (A10)
awintmr0 at awinio?
# Watchdog timers
awinwdt* at awinio?
# RTC
awinrtc* at awinio?
# onboard audio codec
awinac0 at awinio0
audio0 at awinac0
# HDMI
awinhdmi0 at awinio0
awinhdmiaudio0 at awinio0
audio1 at awinhdmiaudio0
# TCON
awintcon0 at awinio0 port 0
awintcon1 at awinio0 port 1
# DE-BE
awindebe0 at awinio0 port 0
awindebe1 at awinio0 port 1
# Framebuffer
genfb0 at awindebe0
genfb1 at awindebe1
wsdisplay* at genfb?
options VCONS_DRAW_INTR
options WSEMUL_VT100
options WS_KERNEL_FG=WSCOL_GREEN
options WS_KERNEL_BG=WSCOL_BLACK
options WSDISPLAY_COMPAT_PCVT
options WSDISPLAY_COMPAT_SYSCONS
options WSDISPLAY_COMPAT_USL
options WSDISPLAY_COMPAT_RAWKBD
options WSDISPLAY_DEFAULTSCREENS=4
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
# Power, Reset and Clock Management
#prcm* at awinio?
# On-board USB
awinusb0 at awinio0 port 0
awinusb1 at awinio0 port 1
ohci* at awinusb?
ehci* at awinusb?
usb* at ohci?
usb* at ehci?
# USB OTG
motg0 at awinio0
usb* at motg?
# SATA
ahcisata* at awinio0
atabus* at ata?
wd* at atabus? drive ?
# 10/100 Ethernet (A10/A20)
awe0 at awinio0 port ?
# 10/100/1000 Ethernet (A10/A20)
awge0 at awinio0 port ?
include "dev/usb/usbdevices.config"
midi* at midibus?
rlphy* at mii? phy ?
rgephy* at mii? phy ?
ukphy* at mii? phy ?
cinclude "arch/evbarm/conf/CUBIEBOARD.local"