NetBSD/sys/arch/macppc/dev/ki2cvar.h

106 lines
3.3 KiB
C

/* $NetBSD: ki2cvar.h,v 1.2 2005/12/11 12:18:03 christos Exp $ */
/* Id: ki2c.c,v 1.7 2002/10/05 09:56:05 tsubai Exp */
/*-
* Copyright (c) 2001 Tsubai Masanari. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef KI2CVAR_H
#define KI2CVAR_H
#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <dev/i2c/i2cvar.h>
/* Keywest I2C Register offsets */
#define MODE 0
#define CONTROL 1
#define STATUS 2
#define ISR 3
#define IER 4
#define ADDR 5
#define SUBADDR 6
#define DATA 7
/* MODE */
#define I2C_SPEED 0x03 /* Speed mask */
#define I2C_100kHz 0x00
#define I2C_50kHz 0x01
#define I2C_25kHz 0x02
#define I2C_MODE 0x0c /* Mode mask */
#define I2C_DUMBMODE 0x00 /* Dumb mode */
#define I2C_STDMODE 0x04 /* Standard mode */
#define I2C_STDSUBMODE 0x08 /* Standard mode + sub address */
#define I2C_COMBMODE 0x0c /* Combined mode */
#define I2C_PORT 0xf0 /* Port mask */
/* CONTROL */
#define I2C_CT_AAK 0x01 /* Send AAK */
#define I2C_CT_ADDR 0x02 /* Send address(es) */
#define I2C_CT_STOP 0x04 /* Send STOP */
#define I2C_CT_START 0x08 /* Send START */
/* STATUS */
#define I2C_ST_BUSY 0x01 /* Busy */
#define I2C_ST_LASTAAK 0x02 /* Last AAK */
#define I2C_ST_LASTRW 0x04 /* Last R/W */
#define I2C_ST_SDA 0x08 /* SDA */
#define I2C_ST_SCL 0x10 /* SCL */
/* ISR/IER */
#define I2C_INT_DATA 0x01 /* Data byte sent/received */
#define I2C_INT_ADDR 0x02 /* Address sent */
#define I2C_INT_STOP 0x04 /* STOP condition sent */
#define I2C_INT_START 0x08 /* START condition sent */
/* I2C flags */
#define I2C_BUSY 0x01
#define I2C_READING 0x02
#define I2C_ERROR 0x04
struct ki2c_softc {
struct device sc_dev;
u_char *sc_reg;
int sc_regstep;
struct i2c_controller sc_i2c;
struct lock sc_buslock;
int sc_flags;
u_char *sc_data;
int sc_resid;
};
struct ki2c_confargs {
char *ka_name; /* device name */
int ka_node;
i2c_tag_t ka_tag; /* our controller */
i2c_addr_t ka_addr; /* address of device */
};
#endif