708 lines
21 KiB
C
708 lines
21 KiB
C
/* $NetBSD: ninjaata32.c,v 1.18 2012/07/31 15:50:34 bouyer Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2006 ITOH Yasufumi.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: ninjaata32.c,v 1.18 2012/07/31 15:50:34 bouyer Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/intr.h>
|
|
|
|
#include <dev/ata/atavar.h>
|
|
#include <dev/ic/wdcreg.h>
|
|
#include <dev/ic/wdcvar.h>
|
|
|
|
#include <dev/ic/ninjaata32reg.h>
|
|
#include <dev/ic/ninjaata32var.h>
|
|
|
|
#ifdef NJATA32_DEBUG
|
|
#define DPRINTF(x) printf x
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
static void njata32_init(struct njata32_softc *, int nosleep);
|
|
static void njata32_irqack(struct ata_channel *);
|
|
static void njata32_clearirq(struct ata_channel *, int);
|
|
static void njata32_setup_channel(struct ata_channel *);
|
|
static int njata32_dma_init(void *, int channel, int drive,
|
|
void *databuf, size_t datalen, int flags);
|
|
static void njata32_piobm_start(void *, int channel, int drive, int skip,
|
|
int xferlen, int flags);
|
|
static int njata32_dma_finish(void *, int channel, int drive, int force);
|
|
static void njata32_piobm_done(void *, int channel, int drive);
|
|
|
|
#if 0 /* ATA DMA is currently unused */
|
|
static const uint8_t njata32_timing_dma[NJATA32_MODE_MAX_DMA + 1] = {
|
|
NJATA32_TIMING_DMA0, NJATA32_TIMING_DMA1, NJATA32_TIMING_DMA2
|
|
};
|
|
#endif
|
|
static const uint8_t njata32_timing_pio[NJATA32_MODE_MAX_PIO + 1] = {
|
|
NJATA32_TIMING_PIO0, NJATA32_TIMING_PIO1, NJATA32_TIMING_PIO2,
|
|
NJATA32_TIMING_PIO3, NJATA32_TIMING_PIO4
|
|
};
|
|
|
|
static void
|
|
njata32_init(struct njata32_softc *sc, int nosleep)
|
|
{
|
|
|
|
/* disable interrupts */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_SELECT, 0);
|
|
|
|
/* bus reset */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
|
|
NJATA32_AS_WAIT0 | NJATA32_AS_BUS_RESET);
|
|
if (nosleep)
|
|
delay(50000);
|
|
else
|
|
tsleep(sc, PRIBIO, "njaini", mstohz(50));
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
|
|
NJATA32_AS_WAIT0);
|
|
|
|
/* initial transfer speed */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_TIMING, NJATA32_TIMING_PIO0 + sc->sc_atawait);
|
|
|
|
/* setup busmaster mode */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_IOBM,
|
|
NJATA32_IOBM_DEFAULT);
|
|
|
|
/* enable interrupts */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER | NJATA32_IRQ_DEV);
|
|
}
|
|
|
|
void
|
|
njata32_attach(struct njata32_softc *sc)
|
|
{
|
|
bus_addr_t dmaaddr;
|
|
int i, devno, error;
|
|
struct wdc_regs *wdr;
|
|
|
|
/*
|
|
* allocate DMA resource
|
|
*/
|
|
if ((error = bus_dmamem_alloc(sc->sc_dmat,
|
|
sizeof(struct njata32_dma_page), PAGE_SIZE, 0,
|
|
&sc->sc_sgt_seg, 1, &sc->sc_sgt_nsegs, BUS_DMA_NOWAIT)) != 0) {
|
|
aprint_error("%s: unable to allocate sgt page, error = %d\n",
|
|
NJATA32NAME(sc), error);
|
|
return;
|
|
}
|
|
if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_sgt_seg,
|
|
sc->sc_sgt_nsegs, sizeof(struct njata32_dma_page),
|
|
(void **)&sc->sc_sgtpg,
|
|
BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
|
|
aprint_error("%s: unable to map sgt page, error = %d\n",
|
|
NJATA32NAME(sc), error);
|
|
goto fail1;
|
|
}
|
|
if ((error = bus_dmamap_create(sc->sc_dmat,
|
|
sizeof(struct njata32_dma_page), 1,
|
|
sizeof(struct njata32_dma_page), 0, BUS_DMA_NOWAIT,
|
|
&sc->sc_dmamap_sgt)) != 0) {
|
|
aprint_error("%s: unable to create sgt DMA map, error = %d\n",
|
|
NJATA32NAME(sc), error);
|
|
goto fail2;
|
|
}
|
|
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_sgt,
|
|
sc->sc_sgtpg, sizeof(struct njata32_dma_page),
|
|
NULL, BUS_DMA_NOWAIT)) != 0) {
|
|
aprint_error("%s: unable to load sgt DMA map, error = %d\n",
|
|
NJATA32NAME(sc), error);
|
|
goto fail3;
|
|
}
|
|
|
|
dmaaddr = sc->sc_dmamap_sgt->dm_segs[0].ds_addr;
|
|
|
|
for (devno = 0; devno < NJATA32_NUM_DEV; devno++) {
|
|
sc->sc_dev[devno].d_sgt = sc->sc_sgtpg->dp_sg[devno];
|
|
sc->sc_dev[devno].d_sgt_dma = dmaaddr +
|
|
offsetof(struct njata32_dma_page, dp_sg[devno]);
|
|
|
|
error = bus_dmamap_create(sc->sc_dmat,
|
|
NJATA32_MAX_XFER, /* max total map size */
|
|
NJATA32_NUM_SG, /* max number of segments */
|
|
NJATA32_SGT_MAXSEGLEN, /* max size of a segment */
|
|
0, /* boundary */
|
|
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
|
|
&sc->sc_dev[devno].d_dmamap_xfer);
|
|
if (error) {
|
|
aprint_error("%s: failed to create DMA map "
|
|
"(error = %d)\n", NJATA32NAME(sc), error);
|
|
goto fail4;
|
|
}
|
|
}
|
|
|
|
/* device properties */
|
|
sc->sc_wdcdev.sc_atac.atac_cap =
|
|
ATAC_CAP_DATA16 | ATAC_CAP_DATA32 | ATAC_CAP_PIOBM;
|
|
sc->sc_wdcdev.irqack = njata32_irqack;
|
|
sc->sc_wdcdev.sc_atac.atac_channels = sc->sc_wdc_chanarray;
|
|
sc->sc_wdcdev.sc_atac.atac_nchannels = NJATA32_NCHAN; /* 1 */
|
|
sc->sc_wdcdev.sc_atac.atac_pio_cap = NJATA32_MODE_MAX_PIO;
|
|
#if 0 /* ATA DMA is currently unused */
|
|
sc->sc_wdcdev.sc_atac.atac_dma_cap = NJATA32_MODE_MAX_DMA;
|
|
#endif
|
|
sc->sc_wdcdev.sc_atac.atac_set_modes = njata32_setup_channel;
|
|
|
|
/* DMA control functions */
|
|
sc->sc_wdcdev.dma_arg = sc;
|
|
sc->sc_wdcdev.dma_init = njata32_dma_init;
|
|
sc->sc_wdcdev.piobm_start = njata32_piobm_start;
|
|
sc->sc_wdcdev.dma_finish = njata32_dma_finish;
|
|
sc->sc_wdcdev.piobm_done = njata32_piobm_done;
|
|
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_NO_EXTRA_RESETS;
|
|
|
|
sc->sc_wdcdev.regs = wdr = &sc->sc_wdc_regs;
|
|
|
|
/* only one channel */
|
|
sc->sc_wdc_chanarray[0] = &sc->sc_ch[0].ch_ata_channel;
|
|
sc->sc_ch[0].ch_ata_channel.ch_channel = 0;
|
|
sc->sc_ch[0].ch_ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac;
|
|
sc->sc_ch[0].ch_ata_channel.ch_queue = &sc->sc_wdc_chqueue;
|
|
sc->sc_wdcdev.wdc_maxdrives = 2; /* max number of drives per channel */
|
|
|
|
/* map ATA registers */
|
|
for (i = 0; i < WDC_NREG; i++) {
|
|
if (bus_space_subregion(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_OFFSET_WDCREGS + i,
|
|
i == wd_data ? 4 : 1, &wdr->cmd_iohs[i]) != 0) {
|
|
aprint_error("%s: couldn't subregion cmd regs\n",
|
|
NJATA32NAME(sc));
|
|
goto fail4;
|
|
}
|
|
}
|
|
wdc_init_shadow_regs(&sc->sc_ch[0].ch_ata_channel);
|
|
wdr->data32iot = NJATA32_REGT(sc);
|
|
wdr->data32ioh = wdr->cmd_iohs[wd_data];
|
|
|
|
/* map ATA ctl reg */
|
|
wdr->ctl_iot = NJATA32_REGT(sc);
|
|
if (bus_space_subregion(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_ALTSTATUS, 1, &wdr->ctl_ioh) != 0) {
|
|
aprint_error("%s: couldn't subregion ctl regs\n",
|
|
NJATA32NAME(sc));
|
|
goto fail4;
|
|
}
|
|
|
|
sc->sc_flags |= NJATA32_CMDPG_MAPPED;
|
|
|
|
/* use flags value as busmaster wait */
|
|
if ((sc->sc_atawait =
|
|
(uint8_t)device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags))
|
|
aprint_normal("%s: ATA wait = %#x\n",
|
|
NJATA32NAME(sc), sc->sc_atawait);
|
|
|
|
njata32_init(sc, cold);
|
|
|
|
wdcattach(&sc->sc_ch[0].ch_ata_channel);
|
|
|
|
return;
|
|
|
|
/*
|
|
* cleanup
|
|
*/
|
|
fail4: while (--devno >= 0) {
|
|
bus_dmamap_destroy(sc->sc_dmat,
|
|
sc->sc_dev[devno].d_dmamap_xfer);
|
|
}
|
|
bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap_sgt);
|
|
fail3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap_sgt);
|
|
fail2: bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_sgtpg,
|
|
sizeof(struct njata32_dma_page));
|
|
fail1: bus_dmamem_free(sc->sc_dmat, &sc->sc_sgt_seg, sc->sc_sgt_nsegs);
|
|
}
|
|
|
|
int
|
|
njata32_detach(struct njata32_softc *sc, int flags)
|
|
{
|
|
int rv, devno;
|
|
|
|
if (sc->sc_flags & NJATA32_CMDPG_MAPPED) {
|
|
if ((rv = wdcdetach(sc->sc_wdcdev.sc_atac.atac_dev, flags)))
|
|
return rv;
|
|
|
|
/* free DMA resource */
|
|
for (devno = 0; devno < NJATA32_NUM_DEV; devno++) {
|
|
bus_dmamap_destroy(sc->sc_dmat,
|
|
sc->sc_dev[devno].d_dmamap_xfer);
|
|
}
|
|
bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap_sgt);
|
|
bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap_sgt);
|
|
bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_sgtpg,
|
|
sizeof(struct njata32_dma_page));
|
|
bus_dmamem_free(sc->sc_dmat, &sc->sc_sgt_seg, sc->sc_sgt_nsegs);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
njata32_irqack(struct ata_channel *chp)
|
|
{
|
|
struct njata32_softc *sc = (void *)chp->ch_atac;
|
|
|
|
/* disable busmaster */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM, NJATA32_BM_WAIT0);
|
|
}
|
|
|
|
static void
|
|
njata32_clearirq(struct ata_channel *chp, int irq)
|
|
{
|
|
struct njata32_softc *sc = (void *)chp->ch_atac;
|
|
|
|
aprint_error("%s: unhandled intr: irq %#x, bm %#x, ",
|
|
NJATA32NAME(sc), irq,
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM));
|
|
|
|
/* disable busmaster */
|
|
njata32_irqack(chp);
|
|
|
|
/* clear device interrupt */
|
|
aprint_normal("err %#x, seccnt %#x, cyl %#x, sdh %#x, ",
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_ERROR),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_SECCNT),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_CYL_LO) |
|
|
(bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_CYL_HI) << 8),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_SDH));
|
|
aprint_normal("status %#x\n",
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_STATUS));
|
|
}
|
|
|
|
static void
|
|
njata32_setup_channel(struct ata_channel *chp)
|
|
{
|
|
struct njata32_softc *sc = (void *)chp->ch_atac;
|
|
struct ata_drive_datas *drvp;
|
|
int drive;
|
|
uint8_t mode;
|
|
|
|
KASSERT(chp->ch_ndrives != 0);
|
|
|
|
sc->sc_timing_pio = 0;
|
|
#if 0 /* ATA DMA is currently unused */
|
|
sc->sc_timing_dma = 0;
|
|
#endif
|
|
|
|
for (drive = 0; drive < chp->ch_ndrives; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
if (drvp->drive_type == ATA_DRIVET_NONE)
|
|
continue; /* no drive */
|
|
|
|
#if 0 /* ATA DMA is currently unused */
|
|
if ((drvp->drive_flags & ATA_DRIVE_DMA) != 0) {
|
|
/*
|
|
* Multiword DMA
|
|
*/
|
|
if ((mode = drvp->DMA_mode) > NJATA32_MODE_MAX_DMA)
|
|
mode = NJATA32_MODE_MAX_DMA;
|
|
if (sc->sc_timing_dma < njata32_timing_dma[mode])
|
|
sc->sc_timing_dma = njata32_timing_dma[mode];
|
|
}
|
|
#endif
|
|
/*
|
|
* PIO
|
|
*/
|
|
if ((mode = drvp->PIO_mode) > NJATA32_MODE_MAX_PIO)
|
|
mode = NJATA32_MODE_MAX_PIO;
|
|
if (sc->sc_timing_pio < njata32_timing_pio[mode])
|
|
sc->sc_timing_pio = njata32_timing_pio[mode];
|
|
}
|
|
|
|
sc->sc_timing_pio += sc->sc_atawait;
|
|
|
|
/* set timing for PIO */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_TIMING, sc->sc_timing_pio);
|
|
}
|
|
|
|
/*
|
|
* map DMA buffer
|
|
*/
|
|
int
|
|
njata32_dma_init(void *v, int channel, int drive, void *databuf,
|
|
size_t datalen, int flags)
|
|
{
|
|
struct njata32_softc *sc = v;
|
|
int error;
|
|
struct njata32_device *dev = &sc->sc_dev[drive];
|
|
|
|
KASSERT(channel == 0);
|
|
KASSERT((dev->d_flags & NJATA32_DEV_DMA_MAPPED) == 0);
|
|
KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
|
|
|
|
KASSERT(flags & (WDC_DMA_PIOBM_ATA | WDC_DMA_PIOBM_ATAPI));
|
|
|
|
/* use PIO for short transfer */
|
|
if (datalen < 64 /* needs tune */) {
|
|
DPRINTF(("%s: njata32_dma_init: short transfer (%u)\n",
|
|
NJATA32NAME(sc), (unsigned)datalen));
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_TIMING, sc->sc_timing_pio);
|
|
return EINVAL;
|
|
}
|
|
|
|
/* use PIO for unaligned transfer (word alignment seems OK) */
|
|
if (((uintptr_t)databuf & 1) || (datalen & 1)) {
|
|
DPRINTF(("%s: njata32_dma_init: unaligned: buf %p, len %u\n",
|
|
NJATA32NAME(sc), databuf, (unsigned)datalen));
|
|
return EINVAL;
|
|
}
|
|
|
|
DPRINTF(("%s: njata32_dma_init: %s: databuf %p, datalen %u\n",
|
|
NJATA32NAME(sc), (flags & WDC_DMA_READ) ? "read" : "write",
|
|
databuf, (unsigned)datalen));
|
|
|
|
error = bus_dmamap_load(sc->sc_dmat, dev->d_dmamap_xfer,
|
|
databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
|
|
((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
|
|
if (error) {
|
|
printf("%s: load xfer failed, error %d\n",
|
|
NJATA32NAME(sc), error);
|
|
return error;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, dev->d_dmamap_xfer, 0,
|
|
dev->d_dmamap_xfer->dm_mapsize,
|
|
(flags & WDC_DMA_READ) ?
|
|
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
dev->d_flags =
|
|
((flags & WDC_DMA_READ) ? NJATA32_DEV_DMA_READ : 0) |
|
|
((flags & WDC_DMA_PIOBM_ATAPI) ? NJATA32_DEV_DMA_ATAPI : 0) |
|
|
NJATA32_DEV_DMA_MAPPED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* start DMA
|
|
*
|
|
* top: databuf + skip
|
|
* size: xferlen
|
|
*/
|
|
void
|
|
njata32_piobm_start(void *v, int channel, int drive,
|
|
int skip, int xferlen, int flags)
|
|
{
|
|
struct njata32_softc *sc = v;
|
|
struct njata32_device *dev = &sc->sc_dev[drive];
|
|
int i, nsegs, seglen;
|
|
uint8_t bmreg;
|
|
|
|
DPRINTF(("%s: njata32_piobm_start: ch%d, dv%d, skip %d, xferlen %d\n",
|
|
NJATA32NAME(sc), channel, drive, skip, xferlen));
|
|
|
|
KASSERT(channel == 0);
|
|
KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
|
|
KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
|
|
|
|
/*
|
|
* create scatter/gather table
|
|
* XXX this code may be slow
|
|
*/
|
|
for (i = nsegs = 0;
|
|
i < dev->d_dmamap_xfer->dm_nsegs && xferlen > 0; i++) {
|
|
if (dev->d_dmamap_xfer->dm_segs[i].ds_len <= skip) {
|
|
skip -= dev->d_dmamap_xfer->dm_segs[i].ds_len;
|
|
continue;
|
|
}
|
|
|
|
seglen = dev->d_dmamap_xfer->dm_segs[i].ds_len - skip;
|
|
if (seglen > xferlen)
|
|
seglen = xferlen;
|
|
|
|
dev->d_sgt[nsegs].sg_addr =
|
|
htole32(dev->d_dmamap_xfer->dm_segs[i].ds_addr + skip);
|
|
dev->d_sgt[nsegs].sg_len = htole32(seglen);
|
|
|
|
xferlen -= seglen;
|
|
nsegs++;
|
|
skip = 0;
|
|
}
|
|
sc->sc_piobm_nsegs = nsegs;
|
|
/* end mark */
|
|
dev->d_sgt[nsegs - 1].sg_len |= htole32(NJATA32_SGT_ENDMARK);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (xferlen)
|
|
panic("%s: njata32_piobm_start: xferlen residue %d\n",
|
|
NJATA32NAME(sc), xferlen);
|
|
#endif
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_sgt,
|
|
(char *)dev->d_sgt - (char *)sc->sc_sgtpg,
|
|
sizeof(struct njata32_sgtable) * nsegs,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* set timing for PIO */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_TIMING, sc->sc_timing_pio);
|
|
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_IOBM,
|
|
NJATA32_IOBM_DEFAULT);
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
|
|
NJATA32_AS_WAIT0);
|
|
|
|
/*
|
|
* interrupt configuration
|
|
*/
|
|
if ((dev->d_flags & (NJATA32_DEV_DMA_READ | NJATA32_DEV_DMA_ATAPI)) ==
|
|
NJATA32_DEV_DMA_READ) {
|
|
/*
|
|
* ATA piobm read is executed while device interrupt is active,
|
|
* so disable device interrupt here
|
|
*/
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER);
|
|
}
|
|
|
|
/* enable scatter/gather busmaster transfer */
|
|
bmreg = NJATA32_BM_EN | NJATA32_BM_SG | NJATA32_BM_WAIT0 |
|
|
((dev->d_flags & NJATA32_DEV_DMA_READ) ? NJATA32_BM_RD : 0);
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
|
|
bmreg);
|
|
|
|
/* load scatter/gather table */
|
|
bus_space_write_4(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_DMAADDR, dev->d_sgt_dma);
|
|
bus_space_write_4(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_DMALENGTH, sizeof(struct njata32_sgtable) * nsegs);
|
|
|
|
/* start transfer */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
|
|
(bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM)
|
|
& ~(NJATA32_BM_RD|NJATA32_BM_SG|NJATA32_BM_WAIT_MASK)) |
|
|
bmreg | NJATA32_BM_GO);
|
|
|
|
sc->sc_devflags = dev->d_flags;
|
|
if (flags & WDC_PIOBM_XFER_IRQ)
|
|
sc->sc_devflags |= NJATA32_DEV_XFER_INTR;
|
|
#ifdef DIAGNOSTIC
|
|
dev->d_flags |= NJATA32_DEV_DMA_STARTED;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* end of DMA
|
|
*/
|
|
int
|
|
njata32_dma_finish(void *v, int channel, int drive,
|
|
int force)
|
|
{
|
|
struct njata32_softc *sc = v;
|
|
struct njata32_device *dev = &sc->sc_dev[drive];
|
|
int bm;
|
|
int error = 0;
|
|
|
|
DPRINTF(("%s: njata32_dma_finish: bm = %#x\n", NJATA32NAME(sc),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM)));
|
|
|
|
KASSERT(channel == 0);
|
|
KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
|
|
KASSERT(dev->d_flags & NJATA32_DEV_DMA_STARTED);
|
|
|
|
bm = bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM);
|
|
|
|
#ifdef NJATA32_DEBUG
|
|
printf("%s: irq %#x, bm %#x, 18 %#x, 1c %#x\n", NJATA32NAME(sc),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_STAT),
|
|
bm,
|
|
bus_space_read_4(NJATA32_REGT(sc), NJATA32_REGH(sc), 0x18),
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc), 0x1c));
|
|
#endif
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_sgt,
|
|
(char *)dev->d_sgt - (char *)sc->sc_sgtpg,
|
|
sizeof(struct njata32_sgtable) * sc->sc_piobm_nsegs,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
|
|
/* check if DMA is active */
|
|
if (bm & NJATA32_BM_GO) {
|
|
error = WDC_DMAST_NOIRQ;
|
|
|
|
switch (force) {
|
|
case WDC_DMAEND_END:
|
|
return error;
|
|
|
|
case WDC_DMAEND_ABRT:
|
|
printf("%s: aborting DMA\n", NJATA32NAME(sc));
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ???
|
|
* For unknown reason, PIOBM transfer sometimes fails in the middle,
|
|
* in which case the bit #7 of BM register becomes 0.
|
|
* Increasing the wait value seems to improve the situation.
|
|
*
|
|
* XXX
|
|
* PIO transfer may also fail, but it seems it can't be detected.
|
|
*/
|
|
if ((bm & NJATA32_BM_DONE) == 0) {
|
|
error |= WDC_DMAST_ERR;
|
|
printf("%s: busmaster error", NJATA32NAME(sc));
|
|
if (sc->sc_atawait < 0x11) {
|
|
if ((sc->sc_atawait & 0xf) == 0)
|
|
sc->sc_atawait++;
|
|
else
|
|
sc->sc_atawait += 0x10;
|
|
printf(", new ATA wait = %#x", sc->sc_atawait);
|
|
njata32_setup_channel(&sc->sc_ch[0].ch_ata_channel);
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
/* stop command */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_AS,
|
|
NJATA32_AS_WAIT0);
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc), NJATA32_REG_BM,
|
|
NJATA32_BM_WAIT0);
|
|
|
|
/* set timing for PIO */
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_TIMING, sc->sc_timing_pio);
|
|
|
|
/*
|
|
* reenable device interrupt in case it was disabled for
|
|
* this transfer
|
|
*/
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_SELECT, NJATA32_IRQ_XFER | NJATA32_IRQ_DEV);
|
|
|
|
#if 1 /* should be? */
|
|
if ((sc->sc_devflags & NJATA32_DEV_GOT_XFER_INTR) == 0)
|
|
error |= WDC_DMAST_ERR;
|
|
#endif
|
|
sc->sc_devflags = 0;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
dev->d_flags &= ~NJATA32_DEV_DMA_STARTED;
|
|
#endif
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* unmap DMA buffer
|
|
*/
|
|
void
|
|
njata32_piobm_done(void *v, int channel, int drive)
|
|
{
|
|
struct njata32_softc *sc = v;
|
|
struct njata32_device *dev = &sc->sc_dev[drive];
|
|
|
|
DPRINTF(("%s: njata32_piobm_done: ch%d dv%d\n",
|
|
NJATA32NAME(sc), channel, drive));
|
|
|
|
KASSERT(channel == 0);
|
|
KASSERT(dev->d_flags & NJATA32_DEV_DMA_MAPPED);
|
|
KASSERT((dev->d_flags & NJATA32_DEV_DMA_STARTED) == 0);
|
|
|
|
/* unload dma map */
|
|
bus_dmamap_sync(sc->sc_dmat, dev->d_dmamap_xfer,
|
|
0, dev->d_dmamap_xfer->dm_mapsize,
|
|
(dev->d_flags & NJATA32_DEV_DMA_READ) ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
|
|
bus_dmamap_unload(sc->sc_dmat, dev->d_dmamap_xfer);
|
|
dev->d_flags &= ~NJATA32_DEV_DMA_MAPPED;
|
|
}
|
|
|
|
int
|
|
njata32_intr(void *arg)
|
|
{
|
|
struct njata32_softc *sc = arg;
|
|
struct ata_channel *chp;
|
|
int irq;
|
|
|
|
irq = bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_IRQ_STAT);
|
|
if ((irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) == 0)
|
|
return 0; /* not mine */
|
|
|
|
DPRINTF(("%s: njata32_intr: irq = %#x, altstatus = %#x\n",
|
|
NJATA32NAME(sc), irq,
|
|
bus_space_read_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_WD_ALTSTATUS)));
|
|
|
|
chp = &sc->sc_ch[0].ch_ata_channel;
|
|
|
|
if (irq & NJATA32_IRQ_XFER)
|
|
sc->sc_devflags |= NJATA32_DEV_GOT_XFER_INTR;
|
|
|
|
if ((irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) == NJATA32_IRQ_XFER &&
|
|
(sc->sc_devflags & NJATA32_DEV_XFER_INTR) == 0) {
|
|
/*
|
|
* transfer done, wait for device interrupt
|
|
*/
|
|
bus_space_write_1(NJATA32_REGT(sc), NJATA32_REGH(sc),
|
|
NJATA32_REG_BM, NJATA32_BM_WAIT0);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* If both transfer done interrupt and device interrupt are
|
|
* active for ATAPI transfer, call wdcintr() twice.
|
|
*/
|
|
if ((sc->sc_devflags & NJATA32_DEV_DMA_ATAPI) &&
|
|
(irq & (NJATA32_IRQ_XFER | NJATA32_IRQ_DEV)) ==
|
|
(NJATA32_IRQ_XFER | NJATA32_IRQ_DEV) &&
|
|
(sc->sc_devflags & NJATA32_DEV_XFER_INTR)) {
|
|
if (wdcintr(chp) == 0) {
|
|
njata32_clearirq(&sc->sc_ch[0].ch_ata_channel, irq);
|
|
}
|
|
}
|
|
|
|
if (wdcintr(chp) == 0) {
|
|
njata32_clearirq(&sc->sc_ch[0].ch_ata_channel, irq);
|
|
}
|
|
|
|
return 1;
|
|
}
|