NetBSD/sys/dev/ic/athrate.h

143 lines
5.8 KiB
C

/* $NetBSD: athrate.h,v 1.3 2014/10/18 08:33:27 snj Exp $ */
/*-
* Copyright (c) 2004-2005 Sam Leffler, Errno Consulting
* Copyright (c) 2004 Video54 Technologies, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD: src/sys/dev/ath/if_athrate.h,v 1.4 2005/04/02 18:54:30 sam Exp $
*/
#ifndef _ATH_RATECTRL_H_
#define _ATH_RATECTRL_H_
/*
* Interface definitions for transmit rate control modules for the
* Atheros driver.
*
* A rate control module is responsible for choosing the transmit rate
* for each data frame. Management+control frames are always sent at
* a fixed rate.
*
* Only one module may be present at a time; the driver references
* rate control interfaces by symbol name. If multiple modules are
* to be supported we'll need to switch to a registration-based scheme
* as is currently done, for example, for authentication modules.
*
* An instance of the rate control module is attached to each device
* at attach time and detached when the device is destroyed. The module
* may associate data with each device and each node (station). Both
* sets of storage are opaque except for the size of the per-node storage
* which must be provided when the module is attached.
*
* The rate control module is notified for each state transition and
* station association/reassociation. Otherwise it is queried for a
* rate for each outgoing frame and provided status from each transmitted
* frame. Any ancillary processing is the responsibility of the module
* (e.g. if periodic processing is required then the module should setup
* its own timer).
*
* In addition to the transmit rate for each frame the module must also
* indicate the number of attempts to make at the specified rate. If this
* number is != ATH_TXMAXTRY then an additional callback is made to setup
* additional transmit state. The rate control code is assumed to write
* this additional data directly to the transmit descriptor.
*/
struct ath_softc;
struct ath_node;
struct ath_desc;
struct ath_ratectrl {
size_t arc_space; /* space required for per-node state */
};
/*
* Attach/detach a rate control module.
*/
struct ath_ratectrl *ath_rate_attach(struct ath_softc *);
void ath_rate_detach(struct ath_ratectrl *);
/*
* State storage handling.
*/
/*
* Initialize per-node state already allocated for the specified
* node; this space can be assumed initialized to zero.
*/
void ath_rate_node_init(struct ath_softc *, struct ath_node *);
/*
* Cleanup any per-node state prior to the node being reclaimed.
*/
void ath_rate_node_cleanup(struct ath_softc *, struct ath_node *);
/*
* Update rate control state on station associate/reassociate
* (when operating as an ap or for nodes discovered when operating
* in ibss mode).
*/
void ath_rate_newassoc(struct ath_softc *, struct ath_node *,
int isNewAssociation);
/*
* Update/reset rate control state for 802.11 state transitions.
* Important mostly as the analog to ath_rate_newassoc when operating
* in station mode.
*/
void ath_rate_newstate(struct ath_softc *, enum ieee80211_state);
/*
* Transmit handling.
*/
/*
* Return the transmit info for a data packet. If multi-rate state
* is to be setup then try0 should contain a value other than ATH_TXMATRY
* and ath_rate_setupxtxdesc will be called after deciding if the frame
* can be transmitted with multi-rate retry.
*/
void ath_rate_findrate(struct ath_softc *, struct ath_node *,
int shortPreamble, size_t frameLen,
u_int8_t *rix, int *try0, u_int8_t *txrate);
/*
* Setup any extended (multi-rate) descriptor state for a data packet.
* The rate index returned by ath_rate_findrate is passed back in.
*/
void ath_rate_setupxtxdesc(struct ath_softc *, struct ath_node *,
struct ath_desc *, int shortPreamble, u_int8_t rix);
/*
* Update rate control state for a packet associated with the
* supplied transmit descriptor. The routine is invoked both
* for packets that were successfully sent and for those that
* failed (consult the descriptor for details).
*/
void ath_rate_tx_complete(struct ath_softc *, struct ath_node *,
const struct ath_desc *last, const struct ath_desc *first);
#endif /* _ATH_RATECTRL_H_ */