NetBSD/etc/Makefile
lukem e7bf86cbd5 Separate snap_kern into three targets, to allow finer control over
which bits to build, and to allow "make -j N" actually do something in
parallel:
- build_kernels: for each of ${ALL_KERNELS}, create kern-${NAME} target
  which configures & builds the kernel ${NAME}.
- build_kernsets: for each of ${KERNEL_SETS}, create kernset-${NAME} target
  to create ${RELEASEDIR}/binary/sets/kern-${NAME}.tgz
- build_releasekernels: for each of ${KERNEL_SETS} ${EXTRA_KERNELS}, create
  ${RELEASEDIR}/binary/kernel/netbsd-${NAME}.gz (et al)
(The latter two .WAIT until build_kernels has completed)
2002-11-18 07:09:46 +00:00

447 lines
16 KiB
Makefile

# $NetBSD: Makefile,v 1.232 2002/11/18 07:09:46 lukem Exp $
# from: @(#)Makefile 8.7 (Berkeley) 5/25/95
# Environment variables without default values:
# DESTDIR must be set before anything in this file will work.
# RELEASEDIR is where the tarred up stuff for a snapshot or
# release will be placed.
#
# Environment variables with default values:
# LOCALTIME will set the default local time for the system you
# build; it determines what /etc/localtime is symlink'd to.
# KERNSRCDIR points to kernel source; it is set by default to ../sys,
# but can be overridden.
# KERNOBJDIR is the kernel build directory, it defaults to
# ${KERNSRCDIR}/arch/${MACHINE}/compile, but can be overridden.
# KERNCONFDIR is where the configuration files for kernels are found;
# default is ${KERNSRCDIR}/arch/${MACHINE}/conf but can be overridden.
# UPDATE is normally undefined; if defined, don't do a 'make clean'
# before kernel compile
# NO_SENDMAIL is normally undefined; if defined, it will not do a
# `make distribution' in the sendmail config file source directory.
#
# Targets:
# distribution: makes a full NetBSD distribution in DESTDIR. If
# INSTALL_DONE is set, it will not do a `make install.'
# if DISTRIBUTION_DONE is set, it will not do anything.
# distrib-dirs: creates an empty NetBSD directory tree in DESTDIR.
# Called by distribution.
# snapshot: calls distribution, above, and then tars up the files
# into a release(7) format in RELEASEDIR. Any port-dependent
# stuff for this target is found in etc.${MACHINE}/Makefile.inc.
# release: a synonym for `snapshot'
# setting NOOBJ prevents "make obj" from doing anything;
# an objdir would break the installation stuff below
NOOBJ= # defined
# For NO_SENDMAIL, INSTPRIV, MKCRYPTO
.include <bsd.own.mk>
# For KERNSRCDIR, KERNOBJDIR, ...
.include <bsd.kernobj.mk>
.MAKEOVERRIDES+= USETOOLS
TZDIR= /usr/share/zoneinfo
LOCALTIME?= UTC
PWD_MKDB?= pwd_mkdb
MAKESUMS= CKSUM=${CKSUM:Q} sh ../distrib/sets/makesums
# Flags for creating ISO CDROM image
# mkisofs is expected to be in $PATH, install via pkgsrc/sysutils/cdrecord
MKISOFS?= mkisofs
DISTRIBREV!= sh ${NETBSDSRCDIR}/sys/conf/osrelease.sh -s
# ISO 9660 volume ID. Note that this can only contain [A-Z0-9_].
ISO_VOLID!= echo NETBSD_${MACHINE}_${DISTRIBREV} | tr a-z A-Z
MKISOFS_FLAGS+= -J -l \
-r -T -v \
-V ${ISO_VOLID} \
-P "The NetBSD Project" \
-m "${RELEASEDIR}/installation/cdrom"
# MD Makefile.inc may append MD targets to BIN[123]. Make sure all
# are empty, to preserve the old semantics of setting them below with "=".
BIN1=
BIN2=
BIN3=
# Directories to build in ${RELEASEDIR}. MD Makefile.inc files can
# add to this.
# NOTE: Parent directories must be listed before subdirectories.
INSTALLATION_DIRS= binary binary/sets binary/kernel installation
.if exists(etc.${MACHINE}/Makefile.inc)
.include "etc.${MACHINE}/Makefile.inc"
.endif
# -rw-r--r--
BINOWN= root
BINGRP= wheel
UTMPGRP= utmp
BIN1+= bootptab changelist csh.cshrc csh.login csh.logout daily \
daily.conf dm.conf floppytab ftpchroot ftpusers \
gettytab group hosts hosts.lpd inetd.conf lkm.conf \
mailer.conf man.conf monthly monthly.conf mrouted.conf \
netconfig networks newsyslog.conf nsswitch.conf ntp.conf \
passwd.conf phones printcap profile protocols rbootd.conf rc rc.conf \
rc.lkm rc.local rc.subr rc.shutdown remote rpc \
security security.conf services shells sysctl.conf syslog.conf \
weekly weekly.conf wscons.conf \
etc.${MACHINE}/ttys etc.${MACHINE}/disktab
.if (${MACHINE_ARCH} == "m68k") || \
(${MACHINE_ARCH} == "ns32k") || \
(${MACHINE_ARCH} == "vax")
BIN1+= ld.so.conf
.elif exists(etc.${MACHINE_ARCH}/ld.so.conf)
BIN1+= etc.${MACHINE_ARCH}/ld.so.conf
.endif
.if exists(etc.${MACHINE_ARCH}/ttyaction)
BIN1+= etc.${MACHINE_ARCH}/ttyaction
.endif
# -rw-rw-r--
BIN2+= motd
# -rw-------
BIN3+= hosts.equiv
ETC_PKG=-T etc_pkg
BASE_PKG=-T base_pkg
ETC_INSTALL_FILE=${INSTALL_FILE} ${ETC_PKG}
ETC_INSTALL_LINK=${INSTALL_LINK} ${ETC_PKG}
ETC_INSTALL_SYMLINK=${INSTALL_SYMLINK} ${ETC_PKG}
NAMEDB= 127 root.cache named.conf localhost loopback.v6
.if make(install-etc-files) # {
.include <bsd.endian.mk>
.if ${TARGET_ENDIANNESS} == "1234"
TARGET_ENDIANNESS= -L
.elif ${TARGET_ENDIANNESS} == "4321"
TARGET_ENDIANNESS= -B
.else
TARGET_ENDIANNESS=
.endif
.endif # install-etc-files # }
obj:
mkdir -p ${KERNOBJDIR}
distribution: check_DESTDIR .WAIT distrib-dirs
.if !defined(DISTRIBUTION_DONE)
.if !defined(INSTALL_DONE)
(cd ..; ${MAKE} _DISTRIB= includes)
(cd ..; ${MAKE} _DISTRIB= install)
.endif # !INSTALL_DONE
${MAKE} install-etc-files
.endif # !DISTRIBUTION_DONE
install-etc-files: check_DESTDIR
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
${BIN1} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 664 \
${BIN2} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
${BIN3} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
aliases ${DESTDIR}/etc/mail
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/etc/mail/local-host-names
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
crontab ${DESTDIR}/var/cron/tabs/root
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
master.passwd ${DESTDIR}/etc
${PWD_MKDB} -p ${TARGET_ENDIANNESS} -d ${DESTDIR}/ \
${DESTDIR}/etc/master.passwd
.if defined(UNPRIVED)
( \
echo "/etc/passwd type=file mode=0644 uname=root gname=wheel tags=etc_pkg"; \
echo "/etc/pwd.db type=file mode=0644 uname=root gname=wheel tags=etc_pkg"; \
echo "/etc/spwd.db type=file mode=0600 uname=root gname=wheel tags=etc_pkg"; \
) | \
sed -e "s|^/|./${DESTDIR}/|g" -e "s|//|/|g" | ${CAT} -l >>${METALOG}
.endif # UNPRIVED
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 555 \
MAKEDEV.local etc.${MACHINE}/MAKEDEV ${DESTDIR}/dev
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
minfree ${DESTDIR}/var/crash
(cd root; \
${ETC_INSTALL_FILE} -o root -g wheel -m 644 \
dot.cshrc ${DESTDIR}/root/.cshrc; \
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
dot.klogin ${DESTDIR}/root/.klogin; \
${ETC_INSTALL_FILE} -o root -g wheel -m 644 \
dot.login ${DESTDIR}/root/.login; \
${ETC_INSTALL_FILE} -o root -g wheel -m 644 \
dot.profile ${DESTDIR}/root/.profile; \
${ETC_INSTALL_FILE} -o root -g wheel -m 644 \
dot.shrc ${DESTDIR}/root/.shrc; \
rm -f ${DESTDIR}/.cshrc ${DESTDIR}/.profile; \
${ETC_INSTALL_LINK} ${DESTDIR}/root/.cshrc ${DESTDIR}/.cshrc; \
${ETC_INSTALL_LINK} ${DESTDIR}/root/.profile ${DESTDIR}/.profile)
(cd defaults; ${MAKE} install)
(cd mtree; ${MAKE} install)
(cd namedb; \
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
${NAMEDB} ${DESTDIR}/etc/namedb)
(cd rc.d; ${MAKE} install)
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
postinstall ${DESTDIR}/etc
${ETC_INSTALL_SYMLINK} -o root -g wheel -m 755 \
${TZDIR}/${LOCALTIME} ${DESTDIR}/etc/localtime
${ETC_INSTALL_SYMLINK} -o root -g wheel -m 755 \
/usr/sbin/rmt ${DESTDIR}/etc/rmt
${ETC_INSTALL_FILE} -o ${BINOWN} -g operator -m 664 \
/dev/null ${DESTDIR}/etc/dumpdates
${ETC_INSTALL_FILE} -o ${BINOWN} -g operator -m 600 \
/dev/null ${DESTDIR}/etc/skeykeys
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
/dev/null ${DESTDIR}/var/at/at.deny
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
/dev/null ${DESTDIR}/var/cron/log
${ETC_INSTALL_FILE} -o nobody -g ${BINGRP} -m 664 \
/dev/null ${DESTDIR}/var/db/locate.database
${ETC_INSTALL_FILE} -o uucp -g dialer -m 640 \
/dev/null ${DESTDIR}/var/log/aculog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/authlog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 664 \
/dev/null ${DESTDIR}/var/log/lastlog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 640 \
/dev/null ${DESTDIR}/var/log/lpd-errs
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/maillog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/messages
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/secure
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/sendmail.st
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/wtmp
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/wtmpx
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/xferlog
${ETC_INSTALL_FILE} -o daemon -g staff -m 664 \
/dev/null ${DESTDIR}/var/msgs/bounds
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${UTMPGRP} -m 664 \
/dev/null ${DESTDIR}/var/run/utmp
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${UTMPGRP} -m 664 \
/dev/null ${DESTDIR}/var/run/utmpx
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/atc_scores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/battlestar.log
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/cfscores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/criblog
${ETC_INSTALL_FILE} -o games -g games -m 660 \
/dev/null ${DESTDIR}/var/games/hackdir/perm
${ETC_INSTALL_FILE} -o games -g games -m 660 \
/dev/null ${DESTDIR}/var/games/hackdir/record
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/llog12.0
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/lscore12.0
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/playerids
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/robots_roll
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/rogue.scores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/saillog
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/snakerawscores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/snake.log
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/tetris.scores
(cd skel; ${MAKE} distribution)
(cd ../usr.bin/mail; ${MAKE} distribution)
(cd ../gnu/usr.sbin/postfix/; ${MAKE} distribution)
.if (${MKCRYPTO} != "no")
(cd ../usr.bin/ssh; ${MAKE} distribution)
.endif
.if !defined(NO_SENDMAIL)
(cd ../gnu/usr.sbin/sendmail/cf/cf; ${MAKE} distribution)
.endif
distrib-dirs: check_DESTDIR
${INSTALL_DIR} -o root -g wheel -m 755 ${BASE_PKG} ${DESTDIR}
${MTREE} -def mtree/NetBSD.dist -p ${DESTDIR}/ -U ${UNPRIVED:D-W}
rm -f ${DESTDIR}/sys
${INSTALL_SYMLINK} -o root -g wheel -m 755 ${BASE_PKG} \
usr/src/sys ${DESTDIR}/sys
release snapshot: check_DESTDIR check_RELEASEDIR .WAIT \
distribution .WAIT snap_pre snap_md_pre .WAIT snap_kern .WAIT snap_md_post
(cd ../distrib/sets; ${MAKE} sets)
${MAKESUMS} -t ${RELEASEDIR}/binary/kernel '*.gz'
# Standalone target to create a CDROM image after the release
# was composed. Should be run after "make build" in both src and xsrc
iso-image: check_DESTDIR check_RELEASEDIR .WAIT iso-image_md_post
iso-image_mi: check_DESTDIR check_RELEASEDIR .WAIT iso-image_md_pre
@if ${MKISOFS} --version; then \
mkdir -p ${RELEASEDIR}/installation/cdrom ; \
${MKISOFS} ${MKISOFS_FLAGS} \
-o ${RELEASEDIR}/installation/cdrom/netbsd-${MACHINE}.iso \
${RELEASEDIR} ; \
${MAKESUMS} -t ${RELEASEDIR}/installation/cdrom '*.iso' ; \
else \
echo "install pkgsrc/sysutils/cdrecord and type 'make iso-image'." ; \
fi
# Setup the $RELEASEDIR to produce a bootable CD image:
iso-image_md_pre: check_DESTDIR check_RELEASEDIR
# nothing here -- look in the machine-dependent Makefile.inc
# Fixup the CD-image to be bootable
iso-image_md_post: check_DESTDIR check_RELEASEDIR .WAIT iso-image_mi
# nothing here -- look in the machine-dependent Makefile.inc
snap_pre: check_DESTDIR check_RELEASEDIR
# Could be a mount point, ignore the errors
-/bin/rm -rf ${RELEASEDIR}
${INSTALL} -d -m 755 ${RELEASEDIR}
.for dir in ${INSTALLATION_DIRS}
${INSTALL} -d -m 755 ${RELEASEDIR}/${dir}
.endfor
# snap_kern --
# This target builds the kernels specified by each port.
# A port may specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernel
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernel area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernel area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
# A port may also specify KERNEL_SUFFIXES, which is an optional list
# of filename suffixes for kernels to include in the kernel sets and
# in the binary/kernel area of the release package (e.g. "netbsd" vs.
# "netbsd.ecoff" and "netbsd.srec"). It is not an error if kernels
# with these suffixes do not exist in the kernel build directory.
#
#
# A list of all the kernels to build, which can be overridden from
# external sources (such as make(1)'s environment or command line)
#
ALL_KERNELS?= ${KERNEL_SETS} ${EXTRA_KERNELS} ${BUILD_KERNELS}
#
GETKERNELAWK= awk '/^config/ {print $$2; found=1} \
END{ if (found == 0) print "netbsd"; }'
#
.if !target(snap_kern) # {
# build_kernels --
# Configure & compile kernels listed in ${ALL_KERNELS}
#
.if !defined(KERNELS_DONE) # {
.for configfile in ${ALL_KERNELS} # {
_KERNELS_TO_BUILD+=kern-${configfile}
kern-${configfile}:
cd ${KERNCONFDIR} && ${CONFIG} -s ${KERNSRCDIR} \
-b ${KERNOBJDIR}/${configfile:C/.*\///} ${configfile}
.if !defined(UPDATE)
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} distclean
.endif
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} depend && ${MAKE}
.endfor # ALL_KERNELS # }
.endif # KERNELS_DONE # }
build_kernels: ${_KERNELS_TO_BUILD}
# build_kernelsets --
# Create kernel sets from ${KERNEL_SETS} into ${RELEASEDIR}/binary/sets
#
.for configfile in ${KERNEL_SETS} # {
_KERNELSETS_TO_BUILD+=kernset-${configfile}
kernset-${configfile}:
kernlist=`${GETKERNELAWK} ${KERNCONFDIR}/${configfile}`; \
kerndir=${KERNOBJDIR}/${configfile:C/.*\///}; \
kernsuffixes="${KERNEL_SUFFIXES}"; \
cd $${kerndir} && ( \
echo "/set uname=${BINOWN} gname=${BINGRP}"; \
echo ". type=dir optional"; \
for kernel in $${kernlist}; do \
echo "./$${kernel} type=file"; \
for s in $${kernsuffixes}; do \
if [ -f $${kernel}.$${s} ]; then \
echo "./$${kernel}.$${s} type=file"; \
fi; \
done; \
done ) | GZIP=-9 ${PAX} -zw \
-M ${UNPRIVED:D-N${NETBSDSRCDIR}/etc} \
-f ${RELEASEDIR}/binary/sets/kern-${configfile}.tgz
.endfor # KERNEL_SETS # }
build_kernelsets: ${_KERNELSETS_TO_BUILD}
# build_releasekernels --
# Build kernel.gz from ${KERNEL_SETS} ${EXTRA_KERNELS} into
# ${RELEASEDIR}/binary/kernel
#
.for configfile in ${KERNEL_SETS} ${EXTRA_KERNELS} # {
_RELEASEKERNELS_TO_BUILD+=releasekern-${configfile}
releasekern-${configfile}:
kernlist=`${GETKERNELAWK} ${KERNCONFDIR}/${configfile:C/.*\///}`; \
kerndir=${KERNOBJDIR}/${configfile:C/.*\///}; \
kernsuffixes="${KERNEL_SUFFIXES}"; \
cd $${kerndir} && \
gziplist=`for kernel in $${kernlist}; do \
echo "$${kernel}"; \
for s in $${kernsuffixes}; do \
if [ -f $${kernel}.$${s} ]; then \
echo "$${kernel}.$${s}"; \
fi; \
done; \
done`; \
for kernel in $${gziplist} ; do \
gzip -c -9 < $${kernel} > \
${RELEASEDIR}/binary/kernel/$${kernel}-${configfile:C/.*\///}.gz ; done
.endfor # KERNEL_SETS EXTRA_KERNELS # }
build_releasekernels: ${_RELEASEKERNELS_TO_BUILD}
# snap_kern --
# build the kernels, then the sets & release kernels
snap_kern: check_DESTDIR check_RELEASEDIR .WAIT \
build_kernels .WAIT \
build_kernelsets build_releasekernels
.endif # !target(snap_kern) # }
snap_md_pre: check_DESTDIR check_RELEASEDIR
# nothing here -- look in the machine-dependent Makefile.inc
snap_md_post: check_DESTDIR check_RELEASEDIR
# nothing here -- look in the machine-dependent Makefile.inc
.include <bsd.prog.mk>