NetBSD/sys/dev/sbus/stp4020reg.h

334 lines
14 KiB
C

/* $NetBSD: stp4020reg.h,v 1.1 1998/11/22 22:14:35 pk Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _STP4020_REG_H
#define _STP4020_REG_H
/*
* STP4020: SBus/PCMCIA bridge supporting two Type-3 PCMCIA cards.
* Programming information source:
* - http://www.sun.com/microelectronics/datasheets/stp4020/
* - SunOS 5.5 header file
*/
/*
* General chip attibutes.
*/
#define STP4020_NSOCK 2 /* number of PCCARD sockets per STP4020 */
#define STP4020_NWIN 3 /* number of windows per socket */
/*
* Socket control registers.
*
* Each PCMCIA socket has two interface control registers and two interface
* status registers associated with it.
*/
/*
* Socket Interface Control register 0
*/
#define STP4020_ICR0_rsvd1 0xc000 /* reserved bits */
#define STP4020_ICR0_PROMEN 0x2000 /* FCode PROM enable */
/* Status change interrupts can be routed to one of two SBus interrupt levels:*/
#define STP4020_ICR0_SCILVL 0x1000 /* card status change interrupt level */
#define STP4020_ICR0_SCILVL_SB0 0x0000 /* interrupt on *SB_INT[0] */
#define STP4020_ICR0_SCILVL_SB1 0x1000 /* interrupt on *SB_INT[1] */
/* Interrupt enable bits: */
#define STP4020_ICR0_CDIE 0x0800 /* card detect interrupt enable */
#define STP4020_ICR0_BVD2IE 0x0400 /* battery voltage detect 2 int en. */
#define STP4020_ICR0_BVD1IE 0x0200 /* battery voltage detect 1 int en. */
#define STP4020_ICR0_RDYIE 0x0100 /* ready/busy interrupt enable */
#define STP4020_ICR0_WPIE 0x0080 /* write protect interrupt enable */
#define STP4020_ICR0_CTOIE 0x0040 /* PC card timeout interrupt enable */
#define STP4020_ICR0_rsvd2 0x0020 /* */
#define STP4020_ICR0_IOIE 0x0010 /* I/O (*IRQ) interrupt enable */
/* PC card I/O interrupts can also be routed to one of two SBus intr levels: */
#define STP4020_ICR0_IOILVL 0x0008 /* I/O (*IRQ) interrupt level (SBus) */
#define STP4020_ICR0_IOILVL_SB0 0x0000 /* interrupt on *SB_INT[0] */
#define STP4020_ICR0_IOILVL_SB1 0x0008 /* interrupt on *SB_INT[1] */
#define STP4020_ICR0_SPKREN 0x0004 /* *SPKR_OUT enable */
#define STP4020_ICR0_RESET 0x0002 /* PC card reset */
#define STP4020_ICR0_IFTYPE 0x0001 /* PC card interface type */
#define STP4020_ICR0_IFTYPE_MEM 0x0000 /* MEMORY only */
#define STP4020_ICR0_IFTYPE_IO 0x0001 /* MEMORY and I/O */
#define STP4020_ICR0_BITS "\177\010" \
"b\0IFTYPE\0b\1RESET\0b\2SPKREN\0" \
"b\3IOILVL\0b\4IOIE\0b\6CTOIE\0" \
"b\7WPIE\0b\10RDYIE\0b\11BVD1IE\0b\12BVD2IE\0"\
"b\13CDIE\0b\14SCILV\0b\15PROMEN\0\0"
/* Shorthand for all status change interrupts enables */
#define STP4020_ICR0_ALL_STATUS_IE ( \
STP4020_ICR0_CDIE | \
STP4020_ICR0_BVD2IE | \
STP4020_ICR0_BVD1IE | \
STP4020_ICR0_RDYIE | \
STP4020_ICR0_WPIE | \
STP4020_ICR0_CTOIE \
)
/*
* Socket Interface Control register 1
*/
#define STP4020_ICR1_LPBKEN 0x8000 /* PC card data loopback enable */
#define STP4020_ICR1_CD1DB 0x4000 /* card detect 1 diagnostic bit */
#define STP4020_ICR1_BVD2DB 0x2000 /* battery voltage detect 2 diag bit */
#define STP4020_ICR1_BVD1DB 0x1000 /* battery voltage detect 1 diag bit */
#define STP4020_ICR1_RDYDB 0x0800 /* ready/busy diagnostic bit */
#define STP4020_ICR1_WPDB 0x0400 /* write protect diagnostic bit */
#define STP4020_ICR1_WAITDB 0x0200 /* *WAIT diagnostic bit */
#define STP4020_ICR1_DIAGEN 0x0100 /* diagnostic enable bit */
#define STP4020_ICR1_rsvd1 0x0080 /* reserved */
#define STP4020_ICR1_APWREN 0x0040 /* PC card auto power switch enable */
/*
* The Vpp controls are two-bit fields which specify which voltage
* should be switched onto Vpp for this socket.
*
* Both of the "no connect" states are equal.
*/
#define STP4020_ICR1_VPP2EN 0x0030 /* Vpp2 power enable */
#define STP4020_ICR1_VPP2_OFF 0x0000 /* no connect */
#define STP4020_ICR1_VPP2_VCC 0x0010 /* Vcc switched onto Vpp2 */
#define STP4020_ICR1_VPP2_VPP 0x0020 /* Vpp switched onto Vpp2 */
#define STP4020_ICR1_VPP2_ZIP 0x0030 /* no connect */
#define STP4020_ICR1_VPP1EN 0x000c /* Vpp1 power enable */
#define STP4020_ICR1_VPP1_OFF 0x0000 /* no connect */
#define STP4020_ICR1_VPP1_VCC 0x0004 /* Vcc switched onto Vpp1 */
#define STP4020_ICR1_VPP1_VPP 0x0008 /* Vpp switched onto Vpp1 */
#define STP4020_ICR1_VPP1_ZIP 0x000c /* no connect */
#define STP4020_ICR1_MSTPWR 0x0002 /* PC card master power enable */
#define STP4020_ICR1_PCIFOE 0x0001 /* PC card interface output enable */
#define STP4020_ICR1_BITS "\177\010" \
"b\0PCIFOE\0b\1MSTPWR\0f\2\2VPP1EN\0" \
"f\4\2VPP2EN\0b\6APWREN\0b\10DIAGEN\0" \
"b\11WAITDB\0b\12WPDB\0b\13RDYDB\0" \
"b\14BVD1D\0b\15BVD2D\0\16CD1DB\0b\17LPBKEN\0"
/*
* Socket Interface Status register 0
*
* Some signals in this register change meaning depending on whether
* the socket is configured as MEMORY-ONLY or MEMORY & I/O:
* mo: valid only if the socket is in memory-only mode
* io: valid only if the socket is in memory and I/O mode.
*
* Pending interrupts are cleared by writing the corresponding status
* bit set in the upper half of this register.
*/
#define STP4020_ISR0_ZERO 0x8000 /* always reads back as zero (mo) */
#define STP4020_ISR0_IOINT 0x8000 /* PC card I/O intr (*IRQ) posted (io)*/
#define STP4020_ISR0_SCINT 0x4000 /* status change interrupt posted */
#define STP4020_ISR0_CDCHG 0x2000 /* card detect status change */
#define STP4020_ISR0_BVD2CHG 0x1000 /* battery voltage detect 2 status change */
#define STP4020_ISR0_BVD1CHG 0x0800 /* battery voltage detect 1 status change */
#define STP4020_ISR0_RDYCHG 0x0400 /* ready/busy status change */
#define STP4020_ISR0_WPCHG 0x0200 /* write protect status change */
#define STP4020_ISR0_PCTO 0x0100 /* PC card access timeout */
#define STP4020_ISR0_ALL_STATUS_IRQ 0x7f00
#define STP4020_ISR0_LIVE 0x00ff /* live status bit mask */
#define STP4020_ISR0_CD2ST 0x0080 /* card detect 2 live status */
#define STP4020_ISR0_CD1ST 0x0040 /* card detect 1 live status */
#define STP4020_ISR0_BVD2ST 0x0020 /* battery voltage detect 2 live status (mo) */
#define STP4020_ISR0_SPKR 0x0020 /* SPKR signal live status (io)*/
#define STP4020_ISR0_BVD1ST 0x0010 /* battery voltage detect 1 live status (mo) */
#define STP4020_ISR0_STSCHG 0x0010 /* I/O *STSCHG signal live status (io)*/
#define STP4020_ISR0_RDYST 0x0008 /* ready/busy live status (mo) */
#define STP4020_ISR0_IOREQ 0x0008 /* I/O *REQ signal live status (io) */
#define STP4020_ISR0_WPST 0x0004 /* write protect live status (mo) */
#define STP4020_ISR0_IOIS16 0x0004 /* IOIS16 signal live status (io) */
#define STP4020_ISR0_WAITST 0x0002 /* wait signal live status */
#define STP4020_ISR0_PWRON 0x0001 /* PC card power status */
#define STP4020_ISR0_IOBITS "\177\010" \
"b\0PWRON\0b\1WAITST\0b\2IOIS16\0b\3IOREQ\0" \
"b\4STSCHG\0b\5SPKR\0b\6CD1ST\0b\7CD2ST\0" \
"b\10PCTO\0b\11WPCHG\0b\12RDYCHG\0" \
"b\13BVD1CHG\0b\14BVD2CHG\0b\15CDCHG\0" \
"b\16SCINT\0b\17IOINT\0\0"
#define STP4020_ISR0_MOBITS "\177\010" \
"b\0PWRON\0b\1WAITST\0b\2WPST\0b\3RDYST\0" \
"b\4BVD1ST\0b\5BVD2ST\0b\6CD1ST\0b\7CD2ST\0" \
"b\10PCTO\0b\11WPCHG\0b\12RDYCHG\0" \
"b\13BVD1CHG\0b\14BVD2CHG\0b\15CDCHG\0" \
"b\16SCINT\0\0"
/*
* Socket Interface Status register 1
*/
#define STP4020_ISR1_rsvd 0xffc0 /* reserved */
#define STP4020_ISR1_PCTYPE_M 0x0030 /* PC card type(s) supported bit mask */
#define STP4020_ISR1_PCTYPE_S 4 /* PC card type(s) supported bit shift */
#define STP4020_ISR1_REV_M 0x000f /* ASIC revision level bit mask */
#define STP4020_ISR1_REV_S 0 /* ASIC revision level bit shift */
#define STP4020_ISR1_BITS "\177\010" \
"f\0\4REV\0f\4\2PCTYPE\0\0" \
/*
* Socket window control/status register definitions.
*
* According to SunOS 5.5:
* "Each PCMCIA socket has three windows associated with it; each of
* these windows can be programmed to map in either the AM, CM or IO
* space on the PC card. Each window can also be programmed with a
* starting or base address relative to the PC card's address zero.
* Each window is a fixed 1Mb in size.
*
* Each window has two window control registers associated with it to
* control the window's PCMCIA bus timing parameters, PC card address
* space that that window maps, and the base address in the
* selected PC card's address space."
*/
#define STP4020_WINDOW_SIZE (1024*1024) /* 1MB */
#define STP4020_WINDOW_SHIFT 20 /* for 1MB */
/*
* PC card Window Control register 0
*/
#define STP4020_WCR0_rsvd 0x8000 /* reserved */
#define STP4020_WCR0_CMDLNG_M 0x7c00 /* command strobe length bit mask */
#define STP4020_WCR0_CMDLNG_S 10 /* command strobe length bit shift */
#define STP4020_WCR0_CMDDLY_M 0x0300 /* command strobe delay bit mask */
#define STP4020_WCR0_CMDDLY_S 8 /* command strobe delay bit shift */
#define STP4020_MEM_SPEED_MIN 100
#define STP4020_MEM_SPEED_MAX 1370
/*
* The ASPSEL (Address Space Select) bits control which of the three PC card
* address spaces this window maps in.
*/
#define STP4020_WCR0_ASPSEL_M 0x00c0 /* address space select bit mask */
#define STP4020_WCR0_ASPSEL_AM 0x0000 /* attribute memory */
#define STP4020_WCR0_ASPSEL_CM 0x0040 /* common memory */
#define STP4020_WCR0_ASPSEL_IO 0x0080 /* I/O */
/*
* The base address controls which 1MB range in the 64MB card address space
* this window maps to.
*/
#define STP4020_WCR0_BASE_M 0x0003f /* base address bit mask */
#define STP4020_WCR0_BASE_S 0 /* base address bit shift */
#define STP4020_ADDR2PAGE(x) ((x) >> 20)
/*
* PC card Window Control register 1
*/
#define STP4020_WCR1_rsvd 0xffe0 /* reserved */
#define STP4020_WCR1_RECDLY_M 0x0018 /* recovery delay bit mask */
#define STP4020_WCR1_RECDLY_S 3 /* recovery delay bit shift */
#define STP4020_WCR1_WAITDLY_M 0x0006 /* *WAIT signal delay bit mask */
#define STP4020_WCR1_WAITDLY_S 1 /* *WAIT signal delay bit shift */
#define STP4020_WCR1_WAITREQ_M 0x0001 /* *WAIT signal is required bit mask */
#define STP4020_WCR1_WAITREQ_S 0 /* *WAIT signal is required bit shift */
#if for_reference_only
/*
* STP4020 CSR structures
*
* There is one stp4020_regs_t structure per instance, and it refers to
* the complete Stp4020 register set.
*
* For each socket, there is one stp4020_socket_csr_t structure, which
* refers to all the registers for that socket. That structure is
* made up of the window register structures as well as the registers
* that control overall socket operation.
*
* For each window, there is one stp4020_window_ctl_t structure, which
* refers to all the registers for that window.
*/
/*
* per-window CSR structure
*/
typedef struct stp4020_window_ctl_t {
volatile ushort_t ctl0; /* window control register 0 */
volatile ushort_t ctl1; /* window control register 1 */
} stp4020_window_ctl_t;
/*
* per-socket CSR structure
*/
typedef struct stp4020_socket_csr_t {
volatile struct stp4020_window_ctl_t window[STP4020_NWIN];
volatile ushort_t ctl0; /* socket control register 0 */
volatile ushort_t ctl1; /* socket control register 1 */
volatile ushort_t stat0; /* socket status register 0 */
volatile ushort_t stat1; /* socket status register 1 */
volatile uchar_t filler[12]; /* filler space */
} stp4020_socket_csr_t;
/*
* per-instance CSR structure
*/
typedef struct stp4020_regs_t {
struct stp4020_socket_csr_t socket[STP4020_NSOCK]; /* socket CSRs */
} stp4020_regs_t;
#endif /* reference */
/* Size of control and status register banks */
#define STP4020_SOCKREGS_SIZE 32
#define STP4020_WINREGS_SIZE 4
/* Relative socket control & status register offsets */
#define STP4020_ICR0_IDX 12
#define STP4020_ICR1_IDX 14
#define STP4020_ISR0_IDX 16
#define STP4020_ISR1_IDX 18
/* Relative Window control register offsets */
#define STP4020_WCR0_IDX 0
#define STP4020_WCR1_IDX 2
/* Socket control and status register offsets */
#define STP4020_ICR0_REG(s) ((32 * (s)) + STP4020_ICR0_IDX)
#define STP4020_ICR1_REG(s) ((32 * (s)) + STP4020_ICR1_IDX)
#define STP4020_ISR0_REG(s) ((32 * (s)) + STP4020_ISR0_IDX)
#define STP4020_ISR1_REG(s) ((32 * (s)) + STP4020_ISR1_IDX)
/* Window control and status registers; one set per socket */
#define STP4020_WCR0_REG(s,w) ((32 * (s)) + (4 * (w)) + STP4020_WCR0_IDX)
#define STP4020_WCR1_REG(s,w) ((32 * (s)) + (4 * (w)) + STP4020_WCR1_IDX)
#endif /* _STP4020_REG_H */