Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/hp300/dev/dca.c

1060 lines
22 KiB
C
Raw Blame History

/* $NetBSD: dca.c,v 1.32 1997/01/30 09:18:34 thorpej Exp $ */
/*
* Copyright (c) 1995, 1996 Jason R. Thorpe. All rights reserved.
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dca.c 8.2 (Berkeley) 1/12/94
*/
/*
* Driver for the 98626/98644/internal serial interface on hp300/hp400,
* based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs.
*
* N.B. On the hp700 and some hp300s, there is a "secret bit" with
* undocumented behavior. The third bit of the Modem Control Register
* (MCR_IEN == 0x08) must be set to enable interrupts. Failure to do
* so can result in deadlock on those machines, whereas the don't seem to
* be any harmful side-effects from setting this bit on non-affected
* machines.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/proc.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
#include <dev/cons.h>
#include <hp300/dev/dioreg.h>
#include <hp300/dev/diovar.h>
#include <hp300/dev/diodevs.h>
#include <hp300/dev/dcareg.h>
#include <hp300/hp300/isr.h>
struct dca_softc {
struct device sc_dev; /* generic device glue */
struct dcadevice *sc_dca; /* pointer to hardware */
struct tty *sc_tty; /* our tty instance */
int sc_oflows; /* overflow counter */
short sc_flags; /* state flags */
/*
* Bits for sc_flags.
*/
#define DCA_ACTIVE 0x0001 /* indicates live unit */
#define DCA_SOFTCAR 0x0002 /* indicates soft-carrier */
#define DCA_HASFIFO 0x0004 /* indicates unit has FIFO */
#define DCA_ISCONSOLE 0x0008 /* indicates unit is console */
};
int dcamatch __P((struct device *, struct cfdata *, void *));
void dcaattach __P((struct device *, struct device *, void *));
struct cfattach dca_ca = {
sizeof(struct dca_softc), dcamatch, dcaattach
};
struct cfdriver dca_cd = {
NULL, "dca", DV_TTY
};
void dcastart();
int dcaparam();
int dcaintr __P((void *));
int dcadefaultrate = TTYDEF_SPEED;
int dcamajor;
/*
* Stuff for DCA console support.
*/
static struct dcadevice *dca_cn = NULL; /* pointer to hardware */
static int dcaconsinit; /* has been initialized */
struct speedtab dcaspeedtab[] = {
0, 0,
50, DCABRD(50),
75, DCABRD(75),
110, DCABRD(110),
134, DCABRD(134),
150, DCABRD(150),
200, DCABRD(200),
300, DCABRD(300),
600, DCABRD(600),
1200, DCABRD(1200),
1800, DCABRD(1800),
2400, DCABRD(2400),
4800, DCABRD(4800),
9600, DCABRD(9600),
19200, DCABRD(19200),
38400, DCABRD(38400),
-1, -1
};
#ifdef KGDB
#include <machine/remote-sl.h>
extern dev_t kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
#define DCAUNIT(x) minor(x)
#ifdef DEBUG
long fifoin[17];
long fifoout[17];
long dcaintrcount[16];
long dcamintcount[16];
#endif
void dcainit __P((struct dcadevice *, int));
int
dcamatch(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct dio_attach_args *da = aux;
switch (da->da_id) {
case DIO_DEVICE_ID_DCA0:
case DIO_DEVICE_ID_DCA0REM:
case DIO_DEVICE_ID_DCA1:
case DIO_DEVICE_ID_DCA1REM:
return (1);
}
return (0);
}
void
dcaattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct dca_softc *sc = (struct dca_softc *)self;
struct dio_attach_args *da = aux;
struct dcadevice *dca;
int unit = self->dv_unit;
int scode = da->da_scode;
int ipl;
if (scode == conscode) {
dca = (struct dcadevice *)conaddr;
sc->sc_flags |= DCA_ISCONSOLE;
DELAY(100000);
/*
* We didn't know which unit this would be during
* the console probe, so we have to fixup cn_dev here.
*/
cn_tab->cn_dev = makedev(dcamajor, unit);
} else {
dca = (struct dcadevice *)iomap(dio_scodetopa(da->da_scode),
da->da_size);
if (dca == NULL) {
printf("\n%s: can't map registers\n",
sc->sc_dev.dv_xname);
return;
}
}
sc->sc_dca = dca;
ipl = DIO_IPL(dca);
printf(" ipl %d", ipl);
dca->dca_reset = 0xFF;
DELAY(100);
/* look for a NS 16550AF UART with FIFOs */
dca->dca_fifo = FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER_14;
DELAY(100);
if ((dca->dca_iir & IIR_FIFO_MASK) == IIR_FIFO_MASK)
sc->sc_flags |= DCA_HASFIFO;
/* Establish interrupt handler. */
(void) isrlink(dcaintr, sc, ipl,
(sc->sc_flags & DCA_HASFIFO) ? ISRPRI_TTY : ISRPRI_TTYNOBUF);
sc->sc_flags |= DCA_ACTIVE;
if (self->dv_cfdata->cf_flags)
sc->sc_flags |= DCA_SOFTCAR;
/* Enable interrupts. */
dca->dca_ic = IC_IE;
/*
* Need to reset baud rate, etc. of next print so reset dcaconsinit.
* Also make sure console is always "hardwired."
*/
if (sc->sc_flags & DCA_ISCONSOLE) {
dcaconsinit = 0;
sc->sc_flags |= DCA_SOFTCAR;
printf(": console, ");
} else
printf(": ");
if (sc->sc_flags & DCA_HASFIFO)
printf("working fifo\n");
else
printf("no fifo\n");
#ifdef KGDB
if (kgdb_dev == makedev(dcamajor, unit)) {
if (sc->sc_flags & DCA_ISCONSOLE)
kgdb_dev = NODEV; /* can't debug over console port */
else {
dcainit(dca, kgdb_rate);
dcaconsinit = 1; /* don't re-init in dcaputc */
if (kgdb_debug_init) {
/*
* Print prefix of device name,
* let kgdb_connect print the rest.
*/
printf("%s: ", sc->sc_dev.dv_xname);
kgdb_connect(1);
} else
printf("%s: kgdb enabled\n",
sc->sc_dev.dv_xname);
}
}
#endif
}
/* ARGSUSED */
int
dcaopen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
int unit = DCAUNIT(dev);
struct dca_softc *sc;
struct tty *tp;
struct dcadevice *dca;
u_char code;
int s, error = 0;
if (unit >= dca_cd.cd_ndevs ||
(sc = dca_cd.cd_devs[unit]) == NULL)
return (ENXIO);
if ((sc->sc_flags & DCA_ACTIVE) == 0)
return (ENXIO);
dca = sc->sc_dca;
if (sc->sc_tty == NULL) {
tp = sc->sc_tty = ttymalloc();
tty_attach(tp);
} else
tp = sc->sc_tty;
tp->t_oproc = dcastart;
tp->t_param = dcaparam;
tp->t_dev = dev;
if ((tp->t_state & TS_ISOPEN) == 0) {
/*
* Sanity clause: reset the card on first open.
* The card might be left in an inconsistent state
* if card memory is read inadvertently.
*/
dcainit(dca, dcadefaultrate);
tp->t_state |= TS_WOPEN;
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = TTYDEF_CFLAG;
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = dcadefaultrate;
s = spltty();
dcaparam(tp, &tp->t_termios);
ttsetwater(tp);
/* Set the FIFO threshold based on the receive speed. */
if (sc->sc_flags & DCA_HASFIFO)
dca->dca_fifo = FIFO_ENABLE | FIFO_RCV_RST |
FIFO_XMT_RST |
(tp->t_ispeed <= 1200 ? FIFO_TRIGGER_1 :
FIFO_TRIGGER_14);
/* Flush any pending I/O */
while ((dca->dca_iir & IIR_IMASK) == IIR_RXRDY)
code = dca->dca_data;
} else if (tp->t_state&TS_XCLUDE && p->p_ucred->cr_uid != 0)
return (EBUSY);
else
s = spltty();
/* Set modem control state. */
(void) dcamctl(sc, MCR_DTR | MCR_RTS, DMSET);
/* Set soft-carrier if so configured. */
if ((sc->sc_flags & DCA_SOFTCAR) || (dcamctl(sc, 0, DMGET) & MSR_DCD))
tp->t_state |= TS_CARR_ON;
/* Wait for carrier if necessary. */
if ((flag & O_NONBLOCK) == 0)
while ((tp->t_cflag & CLOCAL) == 0 &&
(tp->t_state & TS_CARR_ON) == 0) {
tp->t_state |= TS_WOPEN;
error = ttysleep(tp, (caddr_t)&tp->t_rawq,
TTIPRI | PCATCH, ttopen, 0);
if (error) {
splx(s);
return (error);
}
}
splx(s);
if (error == 0)
error = (*linesw[tp->t_line].l_open)(dev, tp);
return (error);
}
/*ARGSUSED*/
int
dcaclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
struct dca_softc *sc;
register struct tty *tp;
register struct dcadevice *dca;
register int unit;
int s;
unit = DCAUNIT(dev);
sc = dca_cd.cd_devs[unit];
dca = sc->sc_dca;
tp = sc->sc_tty;
(*linesw[tp->t_line].l_close)(tp, flag);
s = spltty();
dca->dca_cfcr &= ~CFCR_SBREAK;
#ifdef KGDB
/* do not disable interrupts if debugging */
if (dev != kgdb_dev)
#endif
dca->dca_ier = 0;
if (tp->t_cflag & HUPCL && (sc->sc_flags & DCA_SOFTCAR) == 0) {
/* XXX perhaps only clear DTR */
(void) dcamctl(sc, 0, DMSET);
}
tp->t_state &= ~(TS_BUSY | TS_FLUSH);
splx(s);
ttyclose(tp);
#if 0
tty_detach(tp);
ttyfree(tp);
sc->sc_tty = NULL;
#endif
return (0);
}
int
dcaread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int unit = DCAUNIT(dev);
struct dca_softc *sc;
struct tty *tp;
int error, of;
sc = dca_cd.cd_devs[unit];
tp = sc->sc_tty;
of = sc->sc_oflows;
error = (*linesw[tp->t_line].l_read)(tp, uio, flag);
/*
* XXX hardly a reasonable thing to do, but reporting overflows
* at interrupt time just exacerbates the problem.
*/
if (sc->sc_oflows != of)
log(LOG_WARNING, "%s: silo overflow\n", sc->sc_dev.dv_xname);
return (error);
}
int
dcawrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct dca_softc *sc = dca_cd.cd_devs[DCAUNIT(dev)];
struct tty *tp = sc->sc_tty;
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
struct tty *
dcatty(dev)
dev_t dev;
{
struct dca_softc *sc = dca_cd.cd_devs[DCAUNIT(dev)];
return (sc->sc_tty);
}
int
dcaintr(arg)
void *arg;
{
struct dca_softc *sc = arg;
int unit = sc->sc_dev.dv_unit;
register struct dcadevice *dca = sc->sc_dca;
register struct tty *tp = sc->sc_tty;
register u_char code;
int iflowdone = 0;
/*
* If interrupts aren't enabled, then the interrupt can't
* be for us.
*/
if ((dca->dca_ic & (IC_IR|IC_IE)) != (IC_IR|IC_IE))
return (0);
for (;;) {
code = dca->dca_iir;
#ifdef DEBUG
dcaintrcount[code & IIR_IMASK]++;
#endif
switch (code & IIR_IMASK) {
case IIR_NOPEND:
return (1);
case IIR_RXTOUT:
case IIR_RXRDY:
/* do time-critical read in-line */
/*
* Process a received byte. Inline for speed...
*/
#ifdef KGDB
#define RCVBYTE() \
code = dca->dca_data; \
if ((tp->t_state & TS_ISOPEN) == 0) { \
if (code == FRAME_END && \
kgdb_dev == makedev(dcamajor, unit)) \
kgdb_connect(0); /* trap into kgdb */ \
} else \
(*linesw[tp->t_line].l_rint)(code, tp)
#else
#define RCVBYTE() \
code = dca->dca_data; \
if ((tp->t_state & TS_ISOPEN) != 0) \
(*linesw[tp->t_line].l_rint)(code, tp)
#endif
RCVBYTE();
if (sc->sc_flags & DCA_HASFIFO) {
#ifdef DEBUG
register int fifocnt = 1;
#endif
while ((code = dca->dca_lsr) & LSR_RCV_MASK) {
if (code == LSR_RXRDY) {
RCVBYTE();
} else
dcaeint(sc, code);
#ifdef DEBUG
fifocnt++;
#endif
}
#ifdef DEBUG
if (fifocnt > 16)
fifoin[0]++;
else
fifoin[fifocnt]++;
#endif
}
if (!iflowdone && (tp->t_cflag&CRTS_IFLOW) &&
tp->t_rawq.c_cc > TTYHOG/2) {
dca->dca_mcr &= ~MCR_RTS;
iflowdone = 1;
}
break;
case IIR_TXRDY:
tp->t_state &=~ (TS_BUSY|TS_FLUSH);
if (tp->t_line)
(*linesw[tp->t_line].l_start)(tp);
else
dcastart(tp);
break;
case IIR_RLS:
dcaeint(sc, dca->dca_lsr);
break;
default:
if (code & IIR_NOPEND)
return (1);
log(LOG_WARNING, "%s: weird interrupt: 0x%x\n",
sc->sc_dev.dv_xname, code);
/* fall through */
case IIR_MLSC:
dcamint(sc);
break;
}
}
}
dcaeint(sc, stat)
struct dca_softc *sc;
int stat;
{
struct tty *tp = sc->sc_tty;
struct dcadevice *dca = sc->sc_dca;
int c;
c = dca->dca_data;
if ((tp->t_state & TS_ISOPEN) == 0) {
#ifdef KGDB
/* we don't care about parity errors */
if (((stat & (LSR_BI|LSR_FE|LSR_PE)) == LSR_PE) &&
kgdb_dev == makedev(dcamajor, sc->sc_hd->hp_unit)
&& c == FRAME_END)
kgdb_connect(0); /* trap into kgdb */
#endif
return;
}
if (stat & (LSR_BI | LSR_FE))
c |= TTY_FE;
else if (stat & LSR_PE)
c |= TTY_PE;
else if (stat & LSR_OE)
sc->sc_oflows++;
(*linesw[tp->t_line].l_rint)(c, tp);
}
dcamint(sc)
struct dca_softc *sc;
{
struct tty *tp = sc->sc_tty;
struct dcadevice *dca = sc->sc_dca;
u_char stat;
stat = dca->dca_msr;
#ifdef DEBUG
dcamintcount[stat & 0xf]++;
#endif
if ((stat & MSR_DDCD) &&
(sc->sc_flags & DCA_SOFTCAR) == 0) {
if (stat & MSR_DCD)
(void)(*linesw[tp->t_line].l_modem)(tp, 1);
else if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0)
dca->dca_mcr &= ~(MCR_DTR | MCR_RTS);
}
/*
* CTS change.
* If doing HW output flow control start/stop output as appropriate.
*/
if ((stat & MSR_DCTS) &&
(tp->t_state & TS_ISOPEN) && (tp->t_cflag & CCTS_OFLOW)) {
if (stat & MSR_CTS) {
tp->t_state &=~ TS_TTSTOP;
dcastart(tp);
} else {
tp->t_state |= TS_TTSTOP;
}
}
}
int
dcaioctl(dev, cmd, data, flag, p)
dev_t dev;
int cmd;
caddr_t data;
int flag;
struct proc *p;
{
int unit = DCAUNIT(dev);
struct dca_softc *sc = dca_cd.cd_devs[unit];
struct tty *tp = sc->sc_tty;
struct dcadevice *dca = sc->sc_dca;
int error;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return (error);
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return (error);
switch (cmd) {
case TIOCSBRK:
dca->dca_cfcr |= CFCR_SBREAK;
break;
case TIOCCBRK:
dca->dca_cfcr &= ~CFCR_SBREAK;
break;
case TIOCSDTR:
(void) dcamctl(sc, MCR_DTR | MCR_RTS, DMBIS);
break;
case TIOCCDTR:
(void) dcamctl(sc, MCR_DTR | MCR_RTS, DMBIC);
break;
case TIOCMSET:
(void) dcamctl(sc, *(int *)data, DMSET);
break;
case TIOCMBIS:
(void) dcamctl(sc, *(int *)data, DMBIS);
break;
case TIOCMBIC:
(void) dcamctl(sc, *(int *)data, DMBIC);
break;
case TIOCMGET:
*(int *)data = dcamctl(sc, 0, DMGET);
break;
case TIOCGFLAGS: {
int bits = 0;
if (sc->sc_flags & DCA_SOFTCAR)
bits |= TIOCFLAG_SOFTCAR;
if (tp->t_cflag & CLOCAL)
bits |= TIOCFLAG_CLOCAL;
*(int *)data = bits;
break;
}
case TIOCSFLAGS: {
int userbits;
error = suser(p->p_ucred, &p->p_acflag);
if (error)
return (EPERM);
userbits = *(int *)data;
if ((userbits & TIOCFLAG_SOFTCAR) ||
(sc->sc_flags & DCA_ISCONSOLE))
sc->sc_flags |= DCA_SOFTCAR;
if (userbits & TIOCFLAG_CLOCAL)
tp->t_cflag |= CLOCAL;
break;
}
default:
return (ENOTTY);
}
return (0);
}
int
dcaparam(tp, t)
register struct tty *tp;
register struct termios *t;
{
int unit = DCAUNIT(tp->t_dev);
struct dca_softc *sc = dca_cd.cd_devs[unit];
struct dcadevice *dca = sc->sc_dca;
int cfcr, cflag = t->c_cflag;
int ospeed = ttspeedtab(t->c_ospeed, dcaspeedtab);
int s;
/* check requested parameters */
if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
return (EINVAL);
switch (cflag & CSIZE) {
case CS5:
cfcr = CFCR_5BITS;
break;
case CS6:
cfcr = CFCR_6BITS;
break;
case CS7:
cfcr = CFCR_7BITS;
break;
case CS8:
cfcr = CFCR_8BITS;
break;
}
if (cflag & PARENB) {
cfcr |= CFCR_PENAB;
if ((cflag & PARODD) == 0)
cfcr |= CFCR_PEVEN;
}
if (cflag & CSTOPB)
cfcr |= CFCR_STOPB;
s = spltty();
if (ospeed == 0)
(void) dcamctl(sc, 0, DMSET); /* hang up line */
/*
* Set the FIFO threshold based on the recieve speed, if we
* are changing it.
*/
if (tp->t_ispeed != t->c_ispeed) {
if (sc->sc_flags & DCA_HASFIFO)
dca->dca_fifo = FIFO_ENABLE |
(t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 :
FIFO_TRIGGER_14);
}
if (ospeed != 0) {
dca->dca_cfcr |= CFCR_DLAB;
dca->dca_data = ospeed & 0xFF;
dca->dca_ier = ospeed >> 8;
dca->dca_cfcr = cfcr;
} else
dca->dca_cfcr = cfcr;
/* and copy to tty */
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = cflag;
dca->dca_ier = IER_ERXRDY | IER_ETXRDY | IER_ERLS | IER_EMSC;
dca->dca_mcr |= MCR_IEN;
splx(s);
return (0);
}
void
dcastart(tp)
register struct tty *tp;
{
int s, c, unit = DCAUNIT(tp->t_dev);
struct dca_softc *sc = dca_cd.cd_devs[unit];
struct dcadevice *dca = sc->sc_dca;
s = spltty();
if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP))
goto out;
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (tp->t_state & TS_ASLEEP) {
tp->t_state &= ~TS_ASLEEP;
wakeup((caddr_t)&tp->t_outq);
}
if (tp->t_outq.c_cc == 0)
goto out;
selwakeup(&tp->t_wsel);
}
if (dca->dca_lsr & LSR_TXRDY) {
tp->t_state |= TS_BUSY;
if (sc->sc_flags & DCA_HASFIFO) {
for (c = 0; c < 16 && tp->t_outq.c_cc; ++c)
dca->dca_data = getc(&tp->t_outq);
#ifdef DEBUG
if (c > 16)
fifoout[0]++;
else
fifoout[c]++;
#endif
} else
dca->dca_data = getc(&tp->t_outq);
}
out:
splx(s);
}
/*
* Stop output on a line.
*/
/*ARGSUSED*/
void
dcastop(tp, flag)
register struct tty *tp;
int flag;
{
register int s;
s = spltty();
if (tp->t_state & TS_BUSY)
if ((tp->t_state & TS_TTSTOP) == 0)
tp->t_state |= TS_FLUSH;
splx(s);
}
dcamctl(sc, bits, how)
struct dca_softc *sc;
int bits, how;
{
struct dcadevice *dca = sc->sc_dca;
int s;
/*
* Always make sure MCR_IEN is set (unless setting to 0)
*/
#ifdef KGDB
if (how == DMSET && kgdb_dev == makedev(dcamajor, sc->sc_hd->hp_unit))
bits |= MCR_IEN;
else
#endif
if (how == DMBIS || (how == DMSET && bits))
bits |= MCR_IEN;
else if (how == DMBIC)
bits &= ~MCR_IEN;
s = spltty();
switch (how) {
case DMSET:
dca->dca_mcr = bits;
break;
case DMBIS:
dca->dca_mcr |= bits;
break;
case DMBIC:
dca->dca_mcr &= ~bits;
break;
case DMGET:
bits = dca->dca_msr;
break;
}
(void) splx(s);
return (bits);
}
void
dcainit(dca, rate)
struct dcadevice *dca;
int rate;
{
int s;
short stat;
s = splhigh();
dca->dca_reset = 0xFF;
DELAY(100);
dca->dca_ic = IC_IE;
dca->dca_cfcr = CFCR_DLAB;
rate = ttspeedtab(rate, dcaspeedtab);
dca->dca_data = rate & 0xFF;
dca->dca_ier = rate >> 8;
dca->dca_cfcr = CFCR_8BITS;
dca->dca_ier = IER_ERXRDY | IER_ETXRDY;
dca->dca_fifo =
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1;
dca->dca_mcr = MCR_DTR | MCR_RTS;
DELAY(100);
stat = dca->dca_iir;
splx(s);
}
/*
* Following are all routines needed for DCA to act as console
*/
int
dca_console_scan(scode, va, arg)
int scode;
caddr_t va;
void *arg;
{
struct dcadevice *dca = (struct dcadevice *)va;
struct consdev *cp = arg;
u_char *dioiidev;
int force = 0, pri;
switch (dca->dca_id) {
case DCAID0:
case DCAID1:
pri = CN_NORMAL;
break;
case DCAREMID0:
case DCAREMID1:
pri = CN_REMOTE;
break;
default:
return (0);
}
#ifdef CONSCODE
/*
* Raise our priority, if appropriate.
*/
if (scode == CONSCODE) {
pri = CN_REMOTE;
force = conforced = 1;
}
#endif
/* Only raise priority. */
if (pri > cp->cn_pri)
cp->cn_pri = pri;
/*
* If our priority is higher than the currently-remembered
* console, stash our priority, for the benefit of dcacninit().
*/
if (((cn_tab == NULL) || (cp->cn_pri > cn_tab->cn_pri)) || force) {
cn_tab = cp;
if (scode >= 132) {
dioiidev = (u_char *)va;
return ((dioiidev[0x101] + 1) * 0x100000);
}
return (DIOCSIZE);
}
return (0);
}
void
dcacnprobe(cp)
struct consdev *cp;
{
/* locate the major number */
for (dcamajor = 0; dcamajor < nchrdev; dcamajor++)
if (cdevsw[dcamajor].d_open == dcaopen)
break;
/* initialize required fields */
cp->cn_dev = makedev(dcamajor, 0); /* XXX */
cp->cn_pri = CN_DEAD;
/* Abort early if console is already forced. */
if (conforced)
return;
console_scan(dca_console_scan, cp);
#ifdef KGDB
/* XXX this needs to be fixed. */
if (major(kgdb_dev) == 1) /* XXX */
kgdb_dev = makedev(dcamajor, minor(kgdb_dev));
#endif
}
/* ARGSUSED */
void
dcacninit(cp)
struct consdev *cp;
{
dca_cn = (struct dcadevice *)conaddr;
dcainit(dca_cn, dcadefaultrate);
dcaconsinit = 1;
}
/* ARGSUSED */
int
dcacngetc(dev)
dev_t dev;
{
u_char stat;
int c, s;
#ifdef lint
stat = dev; if (stat) return (0);
#endif
s = splhigh();
while (((stat = dca_cn->dca_lsr) & LSR_RXRDY) == 0)
;
c = dca_cn->dca_data;
stat = dca_cn->dca_iir;
splx(s);
return (c);
}
/*
* Console kernel output character routine.
*/
/* ARGSUSED */
void
dcacnputc(dev, c)
dev_t dev;
register int c;
{
int timo;
u_char stat;
int s = splhigh();
#ifdef lint
stat = dev; if (stat) return;
#endif
if (dcaconsinit == 0) {
dcainit(dca_cn, dcadefaultrate);
dcaconsinit = 1;
}
/* wait for any pending transmission to finish */
timo = 50000;
while (((stat = dca_cn->dca_lsr) & LSR_TXRDY) == 0 && --timo)
;
dca_cn->dca_data = c;
/* wait for this transmission to complete */
timo = 1500000;
while (((stat = dca_cn->dca_lsr) & LSR_TXRDY) == 0 && --timo)
;
/* clear any interrupts generated by this transmission */
stat = dca_cn->dca_iir;
splx(s);
}
Reference in New Issue View Git Blame Copy Permalink