NetBSD/sys/arch/cobalt/conf/GENERIC

259 lines
9.9 KiB
Plaintext

# $NetBSD: GENERIC,v 1.5 2000/05/08 13:49:46 augustss Exp $
include "arch/cobalt/conf/std.cobalt"
#ident "GENERIC-$Revision: 1.5 $"
maxusers 32
# Standard system options
options KTRACE # system call tracing support
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
#options NTP # network time protocol
#options UCONSOLE # users can redirect console (unsafe)
# Debugging options
options DIAGNOSTIC # extra kernel sanity checking
#options DEBUG # extra kernel debugging support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # kernel dynamic debugger
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_43 # compatibility with 4.3BSD binaries
#options COMPAT_10 # NetBSD 0.9 binary compatibility
#options COMPAT_10 # NetBSD 1.0 binary compatibility
#options COMPAT_11 # NetBSD 1.1 binary compatibility
#options COMPAT_12 # NetBSD 1.2 binary compatibility
#options COMPAT_13 # NetBSD 1.3 binary compatibility
#options COMPAT_14 # NetBSD 1.4 binary compatibility
#options EXEC_ECOFF # exec ECOFF binaries
#options COMPAT_ULTRIX # binary compatibility with Ultrix
# File systems
file-system FFS # Berkeley Fast Filesystem
file-system NFS # Sun NFS-compatible filesystem client
file-system KERNFS # kernel data-structure filesystem
#file-system NULLFS # NULL layered filesystem
file-system OVERLAY # overlay file system
file-system MFS # memory-based filesystem
file-system FDESC # user file descriptor filesystem
#file-system UMAPFS # uid/gid remapping filesystem
file-system LFS # Log-based filesystem (still experimental)
#file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
#file-system CD9660 # ISO 9660 + Rock Ridge file system
#file-system UNION # union file system
#file-system MSDOSFS # MS-DOS FAT filesystem(s).
#file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options NFSSERVER # Sun NFS-compatible filesystem server
options QUOTA # FFS quotas
#options FFS_EI # FFS Endian Independant support
#options SOFTDEP # FFS soft updates support.
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
# Networking options
#options GATEWAY # IP packet forwarding
options INET # Internet protocols
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # packet forwarding of multicast packets
#options NS # Xerox NS networking
#options NSIP # Xerox NS tunneling over IP
#options ISO,TPIP # OSI networking
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
#options NETATALK # AppleTalk (over Ethernet) protocol
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options SCSIVERBOSE # human readable SCSI error messages
#options MIIVERBOSE # verbose PHY autoconfig messages
options NFS_BOOT_DHCP
config netbsd root on ? type ?
mainbus0 at root
cpu0 at mainbus?
com0 at mainbus? addr 0x1c800000 level 3
options COM16650
gt0 at mainbus? addr 0x14000000
pci* at gt0
pchb* at pci? dev ? function ?
pcib* at pci? dev ? function ?
# PCI serial/parallel interfaces
puc* at pci? dev ? function ? # PCI "universal" comm. cards
com* at puc? port ?
#lpt* at puc? port ?
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial cards
# PCI SCSI controllers
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA]
#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FC
siop* at pci? dev ? function ? # NCR 53c8xx SCSI
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
# SCSI bus support
#scsibus* at adv?
#scsibus* at adw?
scsibus* at ahc?
#scsibus* at bha?
#scsibus* at dpt?
#scsibus* at isp?
scsibus* at siop?
#scsibus* at pcscp?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
#ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
#cac* at pci? dev ? function ? # Compaq array controller
#ca* at cac? unit ? # Compaq array disk device
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at pciide? channel ? drive ? flags 0x0000
# PCI network interfaces
#de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
#en* at pci? dev ? function ? # ENI/Adaptec ATM
#ep* at pci? dev ? function ? # 3Com 3c59x
#ex* at pci? dev ? function ? # 3Com 90x[B]
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
#esh* at pci? dev ? function ? # Essential HIPPI card
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO10+/100B
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
#sip* at pci? dev ? function ? # SiS 900 Ethernet
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones)
#options TLP_MATCH_21040
#options TLP_MATCH_21041
#options TLP_MATCH_21140
options TLP_MATCH_21142
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
#rtk* at pci? dev ? function ? # Realtek 8129/8139
# MII/PHY support
#exphy* at mii? phy ? # 3Com internal PHYs
#icsphy* at mii? phy ? # ICS1890 PHYs
#inphy* at mii? phy ? # Intel 82555 PHYs
#iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
#nsphy* at mii? phy ? # NS83840 PHYs
#nsphyter* at mii? phy ? # NS83843 PHYs
#qsphy* at mii? phy ? # Quality Semiconductor QS6612
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
#tlphy* at mii? phy ? # ThunderLAN PHYs
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
#ukphy* at mii? phy ? # generic unknown PHYs
# PCI audio devices
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
#fms* at pci? dev ? function ? # Forte Media FM801
#sbl* at pci? dev ? function ? # SoundBlaster Live!
#sv* at pci? dev ? function ? # S3 SonicVibes
# Pseudo-devices
# Disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated disk devices
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# Network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
#pseudo-device ppp 2 # Point-to-Point Protocol
#pseudo-device sl 2 # Serial Line IP
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
#pseudo-device tun 2 # network tunneling over tty
#pseudo-device gre 2 # generic L3 over IP tunnel
#pseudo-device ipip 2 # RFC 2003 IP Encapsulation
#pseudo-device gif 4 # RFC1933 tunnel
#pseudo-device faith 1 # IPv[46] tcp relay translation
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
# Miscellaneous pseudo-devices
pseudo-device pty 64 # pseudo-terminals
#pseudo-device tb 1 # tablet line discipline
#pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random & kernel generator
#options RND_COM # use "com" randomness (BROKEN)
# A pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.