5007 lines
132 KiB
C
5007 lines
132 KiB
C
/* $NetBSD: ehci.c,v 1.266 2019/02/17 04:17:52 rin Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2004-2012 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net), Charles M. Hannum,
|
|
* Jeremy Morse (jeremy.morse@gmail.com), Jared D. McNeill
|
|
* (jmcneill@invisible.ca) and Matthew R. Green (mrg@eterna.com.au).
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller.
|
|
*
|
|
* The EHCI 1.0 spec can be found at
|
|
* http://www.intel.com/technology/usb/spec.htm
|
|
* and the USB 2.0 spec at
|
|
* http://www.usb.org/developers/docs/
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
* 1) hold off explorations by companion controllers until ehci has started.
|
|
*
|
|
* 2) The hub driver needs to handle and schedule the transaction translator,
|
|
* to assign place in frame where different devices get to go. See chapter
|
|
* on hubs in USB 2.0 for details.
|
|
*
|
|
* 3) Command failures are not recovered correctly.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: ehci.c,v 1.266 2019/02/17 04:17:52 rin Exp $");
|
|
|
|
#include "ohci.h"
|
|
#include "uhci.h"
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_usb.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/cpu.h>
|
|
#include <sys/device.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kmem.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/select.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/reboot.h>
|
|
|
|
#include <machine/endian.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdivar.h>
|
|
#include <dev/usb/usbhist.h>
|
|
#include <dev/usb/usb_mem.h>
|
|
#include <dev/usb/usb_quirks.h>
|
|
|
|
#include <dev/usb/ehcireg.h>
|
|
#include <dev/usb/ehcivar.h>
|
|
#include <dev/usb/usbroothub.h>
|
|
|
|
|
|
#ifdef USB_DEBUG
|
|
#ifndef EHCI_DEBUG
|
|
#define ehcidebug 0
|
|
#else
|
|
static int ehcidebug = 0;
|
|
|
|
SYSCTL_SETUP(sysctl_hw_ehci_setup, "sysctl hw.ehci setup")
|
|
{
|
|
int err;
|
|
const struct sysctlnode *rnode;
|
|
const struct sysctlnode *cnode;
|
|
|
|
err = sysctl_createv(clog, 0, NULL, &rnode,
|
|
CTLFLAG_PERMANENT, CTLTYPE_NODE, "ehci",
|
|
SYSCTL_DESCR("ehci global controls"),
|
|
NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL);
|
|
|
|
if (err)
|
|
goto fail;
|
|
|
|
/* control debugging printfs */
|
|
err = sysctl_createv(clog, 0, &rnode, &cnode,
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT,
|
|
"debug", SYSCTL_DESCR("Enable debugging output"),
|
|
NULL, 0, &ehcidebug, sizeof(ehcidebug), CTL_CREATE, CTL_EOL);
|
|
if (err)
|
|
goto fail;
|
|
|
|
return;
|
|
fail:
|
|
aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);
|
|
}
|
|
|
|
#endif /* EHCI_DEBUG */
|
|
#endif /* USB_DEBUG */
|
|
|
|
#define DPRINTF(FMT,A,B,C,D) USBHIST_LOG(ehcidebug,FMT,A,B,C,D)
|
|
#define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(ehcidebug,N,FMT,A,B,C,D)
|
|
#define EHCIHIST_FUNC() USBHIST_FUNC()
|
|
#define EHCIHIST_CALLED() USBHIST_CALLED(ehcidebug)
|
|
|
|
struct ehci_pipe {
|
|
struct usbd_pipe pipe;
|
|
int nexttoggle;
|
|
|
|
ehci_soft_qh_t *sqh;
|
|
union {
|
|
/* Control pipe */
|
|
struct {
|
|
usb_dma_t reqdma;
|
|
} ctrl;
|
|
/* Interrupt pipe */
|
|
struct {
|
|
u_int length;
|
|
} intr;
|
|
/* Iso pipe */
|
|
struct {
|
|
u_int next_frame;
|
|
u_int cur_xfers;
|
|
} isoc;
|
|
};
|
|
};
|
|
|
|
typedef TAILQ_HEAD(ex_completeq, ehci_xfer) ex_completeq_t;
|
|
|
|
Static usbd_status ehci_open(struct usbd_pipe *);
|
|
Static void ehci_poll(struct usbd_bus *);
|
|
Static void ehci_softintr(void *);
|
|
Static int ehci_intr1(ehci_softc_t *);
|
|
Static void ehci_check_qh_intr(ehci_softc_t *, struct ehci_xfer *,
|
|
ex_completeq_t *);
|
|
Static void ehci_check_itd_intr(ehci_softc_t *, struct ehci_xfer *,
|
|
ex_completeq_t *);
|
|
Static void ehci_check_sitd_intr(ehci_softc_t *, struct ehci_xfer *,
|
|
ex_completeq_t *);
|
|
Static void ehci_idone(struct ehci_xfer *, ex_completeq_t *);
|
|
Static void ehci_timeout(void *);
|
|
Static void ehci_timeout_task(void *);
|
|
Static void ehci_intrlist_timeout(void *);
|
|
Static void ehci_doorbell(void *);
|
|
Static void ehci_pcd(void *);
|
|
|
|
Static struct usbd_xfer *
|
|
ehci_allocx(struct usbd_bus *, unsigned int);
|
|
Static void ehci_freex(struct usbd_bus *, struct usbd_xfer *);
|
|
|
|
Static void ehci_get_lock(struct usbd_bus *, kmutex_t **);
|
|
Static int ehci_roothub_ctrl(struct usbd_bus *,
|
|
usb_device_request_t *, void *, int);
|
|
|
|
Static usbd_status ehci_root_intr_transfer(struct usbd_xfer *);
|
|
Static usbd_status ehci_root_intr_start(struct usbd_xfer *);
|
|
Static void ehci_root_intr_abort(struct usbd_xfer *);
|
|
Static void ehci_root_intr_close(struct usbd_pipe *);
|
|
Static void ehci_root_intr_done(struct usbd_xfer *);
|
|
|
|
Static int ehci_device_ctrl_init(struct usbd_xfer *);
|
|
Static void ehci_device_ctrl_fini(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_ctrl_transfer(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_ctrl_start(struct usbd_xfer *);
|
|
Static void ehci_device_ctrl_abort(struct usbd_xfer *);
|
|
Static void ehci_device_ctrl_close(struct usbd_pipe *);
|
|
Static void ehci_device_ctrl_done(struct usbd_xfer *);
|
|
|
|
Static int ehci_device_bulk_init(struct usbd_xfer *);
|
|
Static void ehci_device_bulk_fini(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_bulk_transfer(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_bulk_start(struct usbd_xfer *);
|
|
Static void ehci_device_bulk_abort(struct usbd_xfer *);
|
|
Static void ehci_device_bulk_close(struct usbd_pipe *);
|
|
Static void ehci_device_bulk_done(struct usbd_xfer *);
|
|
|
|
Static int ehci_device_intr_init(struct usbd_xfer *);
|
|
Static void ehci_device_intr_fini(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_intr_transfer(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_intr_start(struct usbd_xfer *);
|
|
Static void ehci_device_intr_abort(struct usbd_xfer *);
|
|
Static void ehci_device_intr_close(struct usbd_pipe *);
|
|
Static void ehci_device_intr_done(struct usbd_xfer *);
|
|
|
|
Static int ehci_device_isoc_init(struct usbd_xfer *);
|
|
Static void ehci_device_isoc_fini(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_isoc_transfer(struct usbd_xfer *);
|
|
Static void ehci_device_isoc_abort(struct usbd_xfer *);
|
|
Static void ehci_device_isoc_close(struct usbd_pipe *);
|
|
Static void ehci_device_isoc_done(struct usbd_xfer *);
|
|
|
|
Static int ehci_device_fs_isoc_init(struct usbd_xfer *);
|
|
Static void ehci_device_fs_isoc_fini(struct usbd_xfer *);
|
|
Static usbd_status ehci_device_fs_isoc_transfer(struct usbd_xfer *);
|
|
Static void ehci_device_fs_isoc_abort(struct usbd_xfer *);
|
|
Static void ehci_device_fs_isoc_close(struct usbd_pipe *);
|
|
Static void ehci_device_fs_isoc_done(struct usbd_xfer *);
|
|
|
|
Static void ehci_device_clear_toggle(struct usbd_pipe *);
|
|
Static void ehci_noop(struct usbd_pipe *);
|
|
|
|
Static void ehci_disown(ehci_softc_t *, int, int);
|
|
|
|
Static ehci_soft_qh_t * ehci_alloc_sqh(ehci_softc_t *);
|
|
Static void ehci_free_sqh(ehci_softc_t *, ehci_soft_qh_t *);
|
|
|
|
Static ehci_soft_qtd_t *ehci_alloc_sqtd(ehci_softc_t *);
|
|
Static void ehci_free_sqtd(ehci_softc_t *, ehci_soft_qtd_t *);
|
|
Static int ehci_alloc_sqtd_chain(ehci_softc_t *,
|
|
struct usbd_xfer *, int, int, ehci_soft_qtd_t **);
|
|
Static void ehci_free_sqtds(ehci_softc_t *, struct ehci_xfer *);
|
|
|
|
Static void ehci_reset_sqtd_chain(ehci_softc_t *, struct usbd_xfer *,
|
|
int, int, int *, ehci_soft_qtd_t **);
|
|
Static void ehci_append_sqtd(ehci_soft_qtd_t *, ehci_soft_qtd_t *);
|
|
|
|
Static ehci_soft_itd_t *ehci_alloc_itd(ehci_softc_t *);
|
|
Static ehci_soft_sitd_t *
|
|
ehci_alloc_sitd(ehci_softc_t *);
|
|
|
|
Static void ehci_remove_itd_chain(ehci_softc_t *, ehci_soft_itd_t *);
|
|
Static void ehci_remove_sitd_chain(ehci_softc_t *, ehci_soft_sitd_t *);
|
|
Static void ehci_free_itd_chain(ehci_softc_t *, ehci_soft_itd_t *);
|
|
Static void ehci_free_sitd_chain(ehci_softc_t *, ehci_soft_sitd_t *);
|
|
|
|
static inline void
|
|
ehci_free_itd_locked(ehci_softc_t *sc, ehci_soft_itd_t *itd)
|
|
{
|
|
|
|
LIST_INSERT_HEAD(&sc->sc_freeitds, itd, free_list);
|
|
}
|
|
|
|
static inline void
|
|
ehci_free_sitd_locked(ehci_softc_t *sc, ehci_soft_sitd_t *sitd)
|
|
{
|
|
|
|
LIST_INSERT_HEAD(&sc->sc_freesitds, sitd, free_list);
|
|
}
|
|
|
|
Static void ehci_abort_isoc_xfer(struct usbd_xfer *, usbd_status);
|
|
|
|
Static usbd_status ehci_device_setintr(ehci_softc_t *, ehci_soft_qh_t *,
|
|
int);
|
|
|
|
Static void ehci_add_qh(ehci_softc_t *, ehci_soft_qh_t *,
|
|
ehci_soft_qh_t *);
|
|
Static void ehci_rem_qh(ehci_softc_t *, ehci_soft_qh_t *,
|
|
ehci_soft_qh_t *);
|
|
Static void ehci_set_qh_qtd(ehci_soft_qh_t *, ehci_soft_qtd_t *);
|
|
Static void ehci_sync_hc(ehci_softc_t *);
|
|
|
|
Static void ehci_close_pipe(struct usbd_pipe *, ehci_soft_qh_t *);
|
|
Static void ehci_abort_xfer(struct usbd_xfer *, usbd_status);
|
|
|
|
#ifdef EHCI_DEBUG
|
|
Static ehci_softc_t *theehci;
|
|
void ehci_dump(void);
|
|
#endif
|
|
|
|
#ifdef EHCI_DEBUG
|
|
Static void ehci_dump_regs(ehci_softc_t *);
|
|
Static void ehci_dump_sqtds(ehci_soft_qtd_t *);
|
|
Static void ehci_dump_sqtd(ehci_soft_qtd_t *);
|
|
Static void ehci_dump_qtd(ehci_qtd_t *);
|
|
Static void ehci_dump_sqh(ehci_soft_qh_t *);
|
|
Static void ehci_dump_sitd(struct ehci_soft_itd *);
|
|
Static void ehci_dump_itds(ehci_soft_itd_t *);
|
|
Static void ehci_dump_itd(struct ehci_soft_itd *);
|
|
Static void ehci_dump_exfer(struct ehci_xfer *);
|
|
#endif
|
|
|
|
#define EHCI_NULL htole32(EHCI_LINK_TERMINATE)
|
|
|
|
static inline void
|
|
ehci_add_intr_list(ehci_softc_t *sc, struct ehci_xfer *ex)
|
|
{
|
|
|
|
TAILQ_INSERT_TAIL(&sc->sc_intrhead, ex, ex_next);
|
|
}
|
|
|
|
static inline void
|
|
ehci_del_intr_list(ehci_softc_t *sc, struct ehci_xfer *ex)
|
|
{
|
|
|
|
TAILQ_REMOVE(&sc->sc_intrhead, ex, ex_next);
|
|
}
|
|
|
|
Static const struct usbd_bus_methods ehci_bus_methods = {
|
|
.ubm_open = ehci_open,
|
|
.ubm_softint = ehci_softintr,
|
|
.ubm_dopoll = ehci_poll,
|
|
.ubm_allocx = ehci_allocx,
|
|
.ubm_freex = ehci_freex,
|
|
.ubm_getlock = ehci_get_lock,
|
|
.ubm_rhctrl = ehci_roothub_ctrl,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_root_intr_methods = {
|
|
.upm_transfer = ehci_root_intr_transfer,
|
|
.upm_start = ehci_root_intr_start,
|
|
.upm_abort = ehci_root_intr_abort,
|
|
.upm_close = ehci_root_intr_close,
|
|
.upm_cleartoggle = ehci_noop,
|
|
.upm_done = ehci_root_intr_done,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_device_ctrl_methods = {
|
|
.upm_init = ehci_device_ctrl_init,
|
|
.upm_fini = ehci_device_ctrl_fini,
|
|
.upm_transfer = ehci_device_ctrl_transfer,
|
|
.upm_start = ehci_device_ctrl_start,
|
|
.upm_abort = ehci_device_ctrl_abort,
|
|
.upm_close = ehci_device_ctrl_close,
|
|
.upm_cleartoggle = ehci_noop,
|
|
.upm_done = ehci_device_ctrl_done,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_device_intr_methods = {
|
|
.upm_init = ehci_device_intr_init,
|
|
.upm_fini = ehci_device_intr_fini,
|
|
.upm_transfer = ehci_device_intr_transfer,
|
|
.upm_start = ehci_device_intr_start,
|
|
.upm_abort = ehci_device_intr_abort,
|
|
.upm_close = ehci_device_intr_close,
|
|
.upm_cleartoggle = ehci_device_clear_toggle,
|
|
.upm_done = ehci_device_intr_done,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_device_bulk_methods = {
|
|
.upm_init = ehci_device_bulk_init,
|
|
.upm_fini = ehci_device_bulk_fini,
|
|
.upm_transfer = ehci_device_bulk_transfer,
|
|
.upm_start = ehci_device_bulk_start,
|
|
.upm_abort = ehci_device_bulk_abort,
|
|
.upm_close = ehci_device_bulk_close,
|
|
.upm_cleartoggle = ehci_device_clear_toggle,
|
|
.upm_done = ehci_device_bulk_done,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_device_isoc_methods = {
|
|
.upm_init = ehci_device_isoc_init,
|
|
.upm_fini = ehci_device_isoc_fini,
|
|
.upm_transfer = ehci_device_isoc_transfer,
|
|
.upm_abort = ehci_device_isoc_abort,
|
|
.upm_close = ehci_device_isoc_close,
|
|
.upm_cleartoggle = ehci_noop,
|
|
.upm_done = ehci_device_isoc_done,
|
|
};
|
|
|
|
Static const struct usbd_pipe_methods ehci_device_fs_isoc_methods = {
|
|
.upm_init = ehci_device_fs_isoc_init,
|
|
.upm_fini = ehci_device_fs_isoc_fini,
|
|
.upm_transfer = ehci_device_fs_isoc_transfer,
|
|
.upm_abort = ehci_device_fs_isoc_abort,
|
|
.upm_close = ehci_device_fs_isoc_close,
|
|
.upm_cleartoggle = ehci_noop,
|
|
.upm_done = ehci_device_fs_isoc_done,
|
|
};
|
|
|
|
static const uint8_t revbits[EHCI_MAX_POLLRATE] = {
|
|
0x00,0x40,0x20,0x60,0x10,0x50,0x30,0x70,0x08,0x48,0x28,0x68,0x18,0x58,0x38,0x78,
|
|
0x04,0x44,0x24,0x64,0x14,0x54,0x34,0x74,0x0c,0x4c,0x2c,0x6c,0x1c,0x5c,0x3c,0x7c,
|
|
0x02,0x42,0x22,0x62,0x12,0x52,0x32,0x72,0x0a,0x4a,0x2a,0x6a,0x1a,0x5a,0x3a,0x7a,
|
|
0x06,0x46,0x26,0x66,0x16,0x56,0x36,0x76,0x0e,0x4e,0x2e,0x6e,0x1e,0x5e,0x3e,0x7e,
|
|
0x01,0x41,0x21,0x61,0x11,0x51,0x31,0x71,0x09,0x49,0x29,0x69,0x19,0x59,0x39,0x79,
|
|
0x05,0x45,0x25,0x65,0x15,0x55,0x35,0x75,0x0d,0x4d,0x2d,0x6d,0x1d,0x5d,0x3d,0x7d,
|
|
0x03,0x43,0x23,0x63,0x13,0x53,0x33,0x73,0x0b,0x4b,0x2b,0x6b,0x1b,0x5b,0x3b,0x7b,
|
|
0x07,0x47,0x27,0x67,0x17,0x57,0x37,0x77,0x0f,0x4f,0x2f,0x6f,0x1f,0x5f,0x3f,0x7f,
|
|
};
|
|
|
|
int
|
|
ehci_init(ehci_softc_t *sc)
|
|
{
|
|
uint32_t vers, sparams, cparams, hcr;
|
|
u_int i;
|
|
usbd_status err;
|
|
ehci_soft_qh_t *sqh;
|
|
u_int ncomp;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
#ifdef EHCI_DEBUG
|
|
theehci = sc;
|
|
#endif
|
|
|
|
mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
|
|
mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_USB);
|
|
cv_init(&sc->sc_doorbell, "ehcidb");
|
|
|
|
sc->sc_xferpool = pool_cache_init(sizeof(struct ehci_xfer), 0, 0, 0,
|
|
"ehcixfer", NULL, IPL_USB, NULL, NULL, NULL);
|
|
|
|
sc->sc_doorbell_si = softint_establish(SOFTINT_USB | SOFTINT_MPSAFE,
|
|
ehci_doorbell, sc);
|
|
KASSERT(sc->sc_doorbell_si != NULL);
|
|
sc->sc_pcd_si = softint_establish(SOFTINT_USB | SOFTINT_MPSAFE,
|
|
ehci_pcd, sc);
|
|
KASSERT(sc->sc_pcd_si != NULL);
|
|
|
|
sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH);
|
|
|
|
vers = EREAD2(sc, EHCI_HCIVERSION);
|
|
aprint_verbose("%s: EHCI version %x.%x\n", device_xname(sc->sc_dev),
|
|
vers >> 8, vers & 0xff);
|
|
|
|
sparams = EREAD4(sc, EHCI_HCSPARAMS);
|
|
DPRINTF("sparams=%#jx", sparams, 0, 0, 0);
|
|
sc->sc_npcomp = EHCI_HCS_N_PCC(sparams);
|
|
ncomp = EHCI_HCS_N_CC(sparams);
|
|
if (ncomp != sc->sc_ncomp) {
|
|
aprint_verbose("%s: wrong number of companions (%d != %d)\n",
|
|
device_xname(sc->sc_dev), ncomp, sc->sc_ncomp);
|
|
#if NOHCI == 0 || NUHCI == 0
|
|
aprint_error("%s: ohci or uhci probably not configured\n",
|
|
device_xname(sc->sc_dev));
|
|
#endif
|
|
if (ncomp < sc->sc_ncomp)
|
|
sc->sc_ncomp = ncomp;
|
|
}
|
|
if (sc->sc_ncomp > 0) {
|
|
KASSERT(!(sc->sc_flags & EHCIF_ETTF));
|
|
aprint_normal_dev(sc->sc_dev,
|
|
"%d companion controller%s, %d port%s%s",
|
|
sc->sc_ncomp,
|
|
sc->sc_ncomp!=1 ? "s" : "",
|
|
EHCI_HCS_N_PCC(sparams),
|
|
EHCI_HCS_N_PCC(sparams)!=1 ? "s" : "",
|
|
sc->sc_ncomp!=1 ? " each" : "");
|
|
if (sc->sc_comps[0]) {
|
|
aprint_normal(":");
|
|
for (i = 0; i < sc->sc_ncomp; i++)
|
|
aprint_normal(" %s",
|
|
device_xname(sc->sc_comps[i]));
|
|
}
|
|
aprint_normal("\n");
|
|
|
|
mutex_init(&sc->sc_complock, MUTEX_DEFAULT, IPL_USB);
|
|
callout_init(&sc->sc_compcallout, CALLOUT_MPSAFE);
|
|
cv_init(&sc->sc_compcv, "ehciccv");
|
|
sc->sc_comp_state = CO_EARLY;
|
|
}
|
|
sc->sc_noport = EHCI_HCS_N_PORTS(sparams);
|
|
sc->sc_hasppc = EHCI_HCS_PPC(sparams);
|
|
|
|
cparams = EREAD4(sc, EHCI_HCCPARAMS);
|
|
DPRINTF("cparams=%#jx", cparams, 0, 0, 0);
|
|
|
|
if (EHCI_HCC_64BIT(cparams)) {
|
|
/* MUST clear segment register if 64 bit capable. */
|
|
EOWRITE4(sc, EHCI_CTRLDSSEGMENT, 0);
|
|
}
|
|
|
|
if (cparams & EHCI_HCC_IST_FULLFRAME) {
|
|
sc->sc_istthreshold = 0;
|
|
} else {
|
|
sc->sc_istthreshold = EHCI_HCC_GET_IST_THRESHOLD(cparams);
|
|
}
|
|
|
|
sc->sc_bus.ub_revision = USBREV_2_0;
|
|
sc->sc_bus.ub_usedma = true;
|
|
sc->sc_bus.ub_dmaflags = USBMALLOC_MULTISEG;
|
|
|
|
/* Reset the controller */
|
|
DPRINTF("resetting", 0, 0, 0, 0);
|
|
EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET);
|
|
for (i = 0; i < 100; i++) {
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
hcr = EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_HCRESET;
|
|
if (!hcr)
|
|
break;
|
|
}
|
|
if (hcr) {
|
|
aprint_error("%s: reset timeout\n", device_xname(sc->sc_dev));
|
|
return EIO;
|
|
}
|
|
if (sc->sc_vendor_init)
|
|
sc->sc_vendor_init(sc);
|
|
|
|
/* XXX need proper intr scheduling */
|
|
sc->sc_rand = 96;
|
|
|
|
/* frame list size at default, read back what we got and use that */
|
|
switch (EHCI_CMD_FLS(EOREAD4(sc, EHCI_USBCMD))) {
|
|
case 0: sc->sc_flsize = 1024; break;
|
|
case 1: sc->sc_flsize = 512; break;
|
|
case 2: sc->sc_flsize = 256; break;
|
|
case 3: return EIO;
|
|
}
|
|
err = usb_allocmem(&sc->sc_bus, sc->sc_flsize * sizeof(ehci_link_t),
|
|
EHCI_FLALIGN_ALIGN, &sc->sc_fldma);
|
|
if (err)
|
|
return err;
|
|
DPRINTF("flsize=%jd", sc->sc_flsize, 0, 0, 0);
|
|
sc->sc_flist = KERNADDR(&sc->sc_fldma, 0);
|
|
|
|
for (i = 0; i < sc->sc_flsize; i++) {
|
|
sc->sc_flist[i] = EHCI_NULL;
|
|
}
|
|
|
|
EOWRITE4(sc, EHCI_PERIODICLISTBASE, DMAADDR(&sc->sc_fldma, 0));
|
|
|
|
sc->sc_softitds = kmem_zalloc(sc->sc_flsize * sizeof(ehci_soft_itd_t *),
|
|
KM_SLEEP);
|
|
if (sc->sc_softitds == NULL)
|
|
return ENOMEM;
|
|
LIST_INIT(&sc->sc_freeitds);
|
|
LIST_INIT(&sc->sc_freesitds);
|
|
TAILQ_INIT(&sc->sc_intrhead);
|
|
|
|
/* Set up the bus struct. */
|
|
sc->sc_bus.ub_methods = &ehci_bus_methods;
|
|
sc->sc_bus.ub_pipesize= sizeof(struct ehci_pipe);
|
|
|
|
sc->sc_eintrs = EHCI_NORMAL_INTRS;
|
|
|
|
/*
|
|
* Allocate the interrupt dummy QHs. These are arranged to give poll
|
|
* intervals that are powers of 2 times 1ms.
|
|
*/
|
|
for (i = 0; i < EHCI_INTRQHS; i++) {
|
|
sqh = ehci_alloc_sqh(sc);
|
|
if (sqh == NULL) {
|
|
err = ENOMEM;
|
|
goto bad1;
|
|
}
|
|
sc->sc_islots[i].sqh = sqh;
|
|
}
|
|
for (i = 0; i < EHCI_INTRQHS; i++) {
|
|
sqh = sc->sc_islots[i].sqh;
|
|
if (i == 0) {
|
|
/* The last (1ms) QH terminates. */
|
|
sqh->qh.qh_link = EHCI_NULL;
|
|
sqh->next = NULL;
|
|
} else {
|
|
/* Otherwise the next QH has half the poll interval */
|
|
sqh->next = sc->sc_islots[(i + 1) / 2 - 1].sqh;
|
|
sqh->qh.qh_link = htole32(sqh->next->physaddr |
|
|
EHCI_LINK_QH);
|
|
}
|
|
sqh->qh.qh_endp = htole32(EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH));
|
|
sqh->qh.qh_endphub = htole32(EHCI_QH_SET_MULT(1));
|
|
sqh->qh.qh_curqtd = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_next = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_status = htole32(EHCI_QTD_HALTED);
|
|
sqh->sqtd = NULL;
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
}
|
|
/* Point the frame list at the last level (128ms). */
|
|
for (i = 0; i < sc->sc_flsize; i++) {
|
|
int j;
|
|
|
|
j = (i & ~(EHCI_MAX_POLLRATE-1)) |
|
|
revbits[i & (EHCI_MAX_POLLRATE-1)];
|
|
sc->sc_flist[j] = htole32(EHCI_LINK_QH |
|
|
sc->sc_islots[EHCI_IQHIDX(EHCI_IPOLLRATES - 1,
|
|
i)].sqh->physaddr);
|
|
}
|
|
usb_syncmem(&sc->sc_fldma, 0, sc->sc_flsize * sizeof(ehci_link_t),
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Allocate dummy QH that starts the async list. */
|
|
sqh = ehci_alloc_sqh(sc);
|
|
if (sqh == NULL) {
|
|
err = ENOMEM;
|
|
goto bad1;
|
|
}
|
|
/* Fill the QH */
|
|
sqh->qh.qh_endp =
|
|
htole32(EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH) | EHCI_QH_HRECL);
|
|
sqh->qh.qh_link =
|
|
htole32(sqh->physaddr | EHCI_LINK_QH);
|
|
sqh->qh.qh_curqtd = EHCI_NULL;
|
|
sqh->next = NULL;
|
|
/* Fill the overlay qTD */
|
|
sqh->qh.qh_qtd.qtd_next = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_status = htole32(EHCI_QTD_HALTED);
|
|
sqh->sqtd = NULL;
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
/* Point to async list */
|
|
sc->sc_async_head = sqh;
|
|
EOWRITE4(sc, EHCI_ASYNCLISTADDR, sqh->physaddr | EHCI_LINK_QH);
|
|
|
|
callout_init(&sc->sc_tmo_intrlist, CALLOUT_MPSAFE);
|
|
|
|
/* Turn on controller */
|
|
EOWRITE4(sc, EHCI_USBCMD,
|
|
EHCI_CMD_ITC_2 | /* 2 microframes interrupt delay */
|
|
(EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_FLS_M) |
|
|
EHCI_CMD_ASE |
|
|
EHCI_CMD_PSE |
|
|
EHCI_CMD_RS);
|
|
|
|
/* Take over port ownership */
|
|
EOWRITE4(sc, EHCI_CONFIGFLAG, EHCI_CONF_CF);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH;
|
|
if (!hcr)
|
|
break;
|
|
}
|
|
if (hcr) {
|
|
aprint_error("%s: run timeout\n", device_xname(sc->sc_dev));
|
|
return EIO;
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
DPRINTF("enabling interrupts", 0, 0, 0, 0);
|
|
EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs);
|
|
|
|
return 0;
|
|
|
|
#if 0
|
|
bad2:
|
|
ehci_free_sqh(sc, sc->sc_async_head);
|
|
#endif
|
|
bad1:
|
|
usb_freemem(&sc->sc_bus, &sc->sc_fldma);
|
|
return err;
|
|
}
|
|
|
|
int
|
|
ehci_intr(void *v)
|
|
{
|
|
ehci_softc_t *sc = v;
|
|
int ret = 0;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
if (sc == NULL)
|
|
return 0;
|
|
|
|
mutex_spin_enter(&sc->sc_intr_lock);
|
|
|
|
if (sc->sc_dying || !device_has_power(sc->sc_dev))
|
|
goto done;
|
|
|
|
/* If we get an interrupt while polling, then just ignore it. */
|
|
if (sc->sc_bus.ub_usepolling) {
|
|
uint32_t intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS));
|
|
|
|
if (intrs)
|
|
EOWRITE4(sc, EHCI_USBSTS, intrs); /* Acknowledge */
|
|
DPRINTFN(16, "ignored interrupt while polling", 0, 0, 0, 0);
|
|
goto done;
|
|
}
|
|
|
|
ret = ehci_intr1(sc);
|
|
|
|
done:
|
|
mutex_spin_exit(&sc->sc_intr_lock);
|
|
return ret;
|
|
}
|
|
|
|
Static int
|
|
ehci_intr1(ehci_softc_t *sc)
|
|
{
|
|
uint32_t intrs, eintrs;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
/* In case the interrupt occurs before initialization has completed. */
|
|
if (sc == NULL) {
|
|
#ifdef DIAGNOSTIC
|
|
printf("ehci_intr1: sc == NULL\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
KASSERT(mutex_owned(&sc->sc_intr_lock));
|
|
|
|
intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS));
|
|
if (!intrs)
|
|
return 0;
|
|
|
|
eintrs = intrs & sc->sc_eintrs;
|
|
DPRINTF("sc=%#jx intrs=%#jx(%#jx) eintrs=%#jx", (uintptr_t)sc, intrs,
|
|
EOREAD4(sc, EHCI_USBSTS), eintrs);
|
|
if (!eintrs)
|
|
return 0;
|
|
|
|
EOWRITE4(sc, EHCI_USBSTS, intrs); /* Acknowledge */
|
|
if (eintrs & EHCI_STS_IAA) {
|
|
DPRINTF("door bell", 0, 0, 0, 0);
|
|
kpreempt_disable();
|
|
KASSERT(sc->sc_doorbell_si != NULL);
|
|
softint_schedule(sc->sc_doorbell_si);
|
|
kpreempt_enable();
|
|
eintrs &= ~EHCI_STS_IAA;
|
|
}
|
|
if (eintrs & (EHCI_STS_INT | EHCI_STS_ERRINT)) {
|
|
DPRINTF("INT=%jd ERRINT=%jd",
|
|
eintrs & EHCI_STS_INT ? 1 : 0,
|
|
eintrs & EHCI_STS_ERRINT ? 1 : 0, 0, 0);
|
|
usb_schedsoftintr(&sc->sc_bus);
|
|
eintrs &= ~(EHCI_STS_INT | EHCI_STS_ERRINT);
|
|
}
|
|
if (eintrs & EHCI_STS_HSE) {
|
|
printf("%s: unrecoverable error, controller halted\n",
|
|
device_xname(sc->sc_dev));
|
|
/* XXX what else */
|
|
}
|
|
if (eintrs & EHCI_STS_PCD) {
|
|
kpreempt_disable();
|
|
KASSERT(sc->sc_pcd_si != NULL);
|
|
softint_schedule(sc->sc_pcd_si);
|
|
kpreempt_enable();
|
|
eintrs &= ~EHCI_STS_PCD;
|
|
}
|
|
|
|
if (eintrs != 0) {
|
|
/* Block unprocessed interrupts. */
|
|
sc->sc_eintrs &= ~eintrs;
|
|
EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs);
|
|
printf("%s: blocking intrs 0x%x\n",
|
|
device_xname(sc->sc_dev), eintrs);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
Static void
|
|
ehci_doorbell(void *addr)
|
|
{
|
|
ehci_softc_t *sc = addr;
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
cv_broadcast(&sc->sc_doorbell);
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static void
|
|
ehci_pcd(void *addr)
|
|
{
|
|
ehci_softc_t *sc = addr;
|
|
struct usbd_xfer *xfer;
|
|
u_char *p;
|
|
int i, m;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
xfer = sc->sc_intrxfer;
|
|
|
|
if (xfer == NULL) {
|
|
/* Just ignore the change. */
|
|
goto done;
|
|
}
|
|
|
|
p = xfer->ux_buf;
|
|
m = uimin(sc->sc_noport, xfer->ux_length * 8 - 1);
|
|
memset(p, 0, xfer->ux_length);
|
|
for (i = 1; i <= m; i++) {
|
|
/* Pick out CHANGE bits from the status reg. */
|
|
if (EOREAD4(sc, EHCI_PORTSC(i)) & EHCI_PS_CLEAR)
|
|
p[i/8] |= 1 << (i%8);
|
|
if (i % 8 == 7)
|
|
DPRINTF("change(%jd)=0x%02jx", i / 8, p[i/8], 0, 0);
|
|
}
|
|
xfer->ux_actlen = xfer->ux_length;
|
|
xfer->ux_status = USBD_NORMAL_COMPLETION;
|
|
|
|
usb_transfer_complete(xfer);
|
|
|
|
done:
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static void
|
|
ehci_softintr(void *v)
|
|
{
|
|
struct usbd_bus *bus = v;
|
|
ehci_softc_t *sc = EHCI_BUS2SC(bus);
|
|
struct ehci_xfer *ex, *nextex;
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
ex_completeq_t cq;
|
|
TAILQ_INIT(&cq);
|
|
|
|
/*
|
|
* The only explanation I can think of for why EHCI is as brain dead
|
|
* as UHCI interrupt-wise is that Intel was involved in both.
|
|
* An interrupt just tells us that something is done, we have no
|
|
* clue what, so we need to scan through all active transfers. :-(
|
|
*/
|
|
|
|
/*
|
|
* ehci_idone will remove transfer from sc->sc_intrhead if it's
|
|
* complete and add to our cq list
|
|
*
|
|
*/
|
|
TAILQ_FOREACH_SAFE(ex, &sc->sc_intrhead, ex_next, nextex) {
|
|
switch (ex->ex_type) {
|
|
case EX_CTRL:
|
|
case EX_BULK:
|
|
case EX_INTR:
|
|
ehci_check_qh_intr(sc, ex, &cq);
|
|
break;
|
|
case EX_ISOC:
|
|
ehci_check_itd_intr(sc, ex, &cq);
|
|
break;
|
|
case EX_FS_ISOC:
|
|
ehci_check_sitd_intr(sc, ex, &cq);
|
|
break;
|
|
default:
|
|
KASSERT(false);
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* We abuse ex_next for the interrupt and complete lists and
|
|
* interrupt transfers will get re-added here so use
|
|
* the _SAFE version of TAILQ_FOREACH.
|
|
*/
|
|
TAILQ_FOREACH_SAFE(ex, &cq, ex_next, nextex) {
|
|
usb_transfer_complete(&ex->ex_xfer);
|
|
}
|
|
|
|
/* Schedule a callout to catch any dropped transactions. */
|
|
if ((sc->sc_flags & EHCIF_DROPPED_INTR_WORKAROUND) &&
|
|
!TAILQ_EMPTY(&sc->sc_intrhead))
|
|
callout_reset(&sc->sc_tmo_intrlist,
|
|
hz, ehci_intrlist_timeout, sc);
|
|
}
|
|
|
|
Static void
|
|
ehci_check_qh_intr(ehci_softc_t *sc, struct ehci_xfer *ex, ex_completeq_t *cq)
|
|
{
|
|
ehci_soft_qtd_t *sqtd, *fsqtd, *lsqtd;
|
|
uint32_t status;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
|
|
if (ex->ex_type == EX_CTRL) {
|
|
fsqtd = ex->ex_setup;
|
|
lsqtd = ex->ex_status;
|
|
} else {
|
|
fsqtd = ex->ex_sqtdstart;
|
|
lsqtd = ex->ex_sqtdend;
|
|
}
|
|
KASSERTMSG(fsqtd != NULL && lsqtd != NULL,
|
|
"xfer %p xt %d fsqtd %p lsqtd %p", ex, ex->ex_type, fsqtd, lsqtd);
|
|
|
|
/*
|
|
* If the last TD is still active we need to check whether there
|
|
* is an error somewhere in the middle, or whether there was a
|
|
* short packet (SPD and not ACTIVE).
|
|
*/
|
|
usb_syncmem(&lsqtd->dma,
|
|
lsqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(lsqtd->qtd.qtd_status),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
status = le32toh(lsqtd->qtd.qtd_status);
|
|
usb_syncmem(&lsqtd->dma,
|
|
lsqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(lsqtd->qtd.qtd_status), BUS_DMASYNC_PREREAD);
|
|
if (status & EHCI_QTD_ACTIVE) {
|
|
DPRINTFN(10, "active ex=%#jx", (uintptr_t)ex, 0, 0, 0);
|
|
|
|
/* last qTD has already been checked */
|
|
for (sqtd = fsqtd; sqtd != lsqtd; sqtd = sqtd->nextqtd) {
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(sqtd->qtd.qtd_status),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
status = le32toh(sqtd->qtd.qtd_status);
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(sqtd->qtd.qtd_status), BUS_DMASYNC_PREREAD);
|
|
/* If there's an active QTD the xfer isn't done. */
|
|
if (status & EHCI_QTD_ACTIVE)
|
|
break;
|
|
/* Any kind of error makes the xfer done. */
|
|
if (status & EHCI_QTD_HALTED)
|
|
goto done;
|
|
/* Handle short packets */
|
|
if (EHCI_QTD_GET_BYTES(status) != 0) {
|
|
/*
|
|
* If we get here for a control transfer then
|
|
* we need to let the hardware complete the
|
|
* status phase. That is, we're not done
|
|
* quite yet.
|
|
*
|
|
* Otherwise, we're done.
|
|
*/
|
|
if (ex->ex_type == EX_CTRL) {
|
|
break;
|
|
}
|
|
goto done;
|
|
}
|
|
}
|
|
DPRINTFN(10, "ex=%#jx std=%#jx still active",
|
|
(uintptr_t)ex, (uintptr_t)ex->ex_sqtdstart, 0, 0);
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- still active start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqtds(ex->ex_sqtdstart);
|
|
DPRINTFN(5, "--- still active end ---", 0, 0, 0, 0);
|
|
#endif
|
|
return;
|
|
}
|
|
done:
|
|
DPRINTFN(10, "ex=%#jx done", (uintptr_t)ex, 0, 0, 0);
|
|
ehci_idone(ex, cq);
|
|
}
|
|
|
|
Static void
|
|
ehci_check_itd_intr(ehci_softc_t *sc, struct ehci_xfer *ex, ex_completeq_t *cq)
|
|
{
|
|
ehci_soft_itd_t *itd;
|
|
int i;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
if (&ex->ex_xfer != SIMPLEQ_FIRST(&ex->ex_xfer.ux_pipe->up_queue))
|
|
return;
|
|
|
|
KASSERTMSG(ex->ex_itdstart != NULL && ex->ex_itdend != NULL,
|
|
"xfer %p fitd %p litd %p", ex, ex->ex_itdstart, ex->ex_itdend);
|
|
|
|
itd = ex->ex_itdend;
|
|
|
|
/*
|
|
* check no active transfers in last itd, meaning we're finished
|
|
*/
|
|
|
|
usb_syncmem(&itd->dma, itd->offs + offsetof(ehci_itd_t, itd_ctl),
|
|
sizeof(itd->itd.itd_ctl),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
for (i = 0; i < EHCI_ITD_NUFRAMES; i++) {
|
|
if (le32toh(itd->itd.itd_ctl[i]) & EHCI_ITD_ACTIVE)
|
|
break;
|
|
}
|
|
|
|
if (i == EHCI_ITD_NUFRAMES) {
|
|
goto done; /* All 8 descriptors inactive, it's done */
|
|
}
|
|
|
|
usb_syncmem(&itd->dma, itd->offs + offsetof(ehci_itd_t, itd_ctl),
|
|
sizeof(itd->itd.itd_ctl), BUS_DMASYNC_PREREAD);
|
|
|
|
DPRINTFN(10, "ex %#jx itd %#jx still active",
|
|
(uintptr_t)ex, (uintptr_t)ex->ex_itdstart, 0, 0);
|
|
return;
|
|
done:
|
|
DPRINTF("ex %#jx done", (uintptr_t)ex, 0, 0, 0);
|
|
ehci_idone(ex, cq);
|
|
}
|
|
|
|
void
|
|
ehci_check_sitd_intr(ehci_softc_t *sc, struct ehci_xfer *ex, ex_completeq_t *cq)
|
|
{
|
|
ehci_soft_sitd_t *sitd;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
if (&ex->ex_xfer != SIMPLEQ_FIRST(&ex->ex_xfer.ux_pipe->up_queue))
|
|
return;
|
|
|
|
KASSERTMSG(ex->ex_sitdstart != NULL && ex->ex_sitdend != NULL,
|
|
"xfer %p fsitd %p lsitd %p", ex, ex->ex_sitdstart, ex->ex_sitdend);
|
|
|
|
sitd = ex->ex_sitdend;
|
|
|
|
/*
|
|
* check no active transfers in last sitd, meaning we're finished
|
|
*/
|
|
|
|
usb_syncmem(&sitd->dma, sitd->offs + offsetof(ehci_sitd_t, sitd_trans),
|
|
sizeof(sitd->sitd.sitd_trans),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
bool active = ((le32toh(sitd->sitd.sitd_trans) & EHCI_SITD_ACTIVE) != 0);
|
|
|
|
usb_syncmem(&sitd->dma, sitd->offs + offsetof(ehci_sitd_t, sitd_trans),
|
|
sizeof(sitd->sitd.sitd_trans), BUS_DMASYNC_PREREAD);
|
|
|
|
if (active)
|
|
return;
|
|
|
|
DPRINTFN(10, "ex=%#jx done", (uintptr_t)ex, 0, 0, 0);
|
|
ehci_idone(ex, cq);
|
|
}
|
|
|
|
|
|
Static void
|
|
ehci_idone(struct ehci_xfer *ex, ex_completeq_t *cq)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
struct usbd_xfer *xfer = &ex->ex_xfer;
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_softc *sc = EHCI_XFER2SC(xfer);
|
|
ehci_soft_qtd_t *sqtd, *fsqtd, *lsqtd;
|
|
uint32_t status = 0, nstatus = 0;
|
|
int actlen = 0;
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
|
|
DPRINTF("ex=%#jx", (uintptr_t)ex, 0, 0, 0);
|
|
|
|
/*
|
|
* If software has completed it, either by cancellation
|
|
* or timeout, drop it on the floor.
|
|
*/
|
|
if (xfer->ux_status != USBD_IN_PROGRESS) {
|
|
KASSERT(xfer->ux_status == USBD_CANCELLED ||
|
|
xfer->ux_status == USBD_TIMEOUT);
|
|
DPRINTF("aborted xfer=%#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Cancel the timeout and the task, which have not yet
|
|
* run. If they have already fired, at worst they are
|
|
* waiting for the lock. They will see that the xfer
|
|
* is no longer in progress and give up.
|
|
*/
|
|
callout_stop(&xfer->ux_callout);
|
|
usb_rem_task(xfer->ux_pipe->up_dev, &xfer->ux_aborttask);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
#ifdef EHCI_DEBUG
|
|
if (ex->ex_isdone) {
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_exfer(ex);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
}
|
|
#endif
|
|
KASSERTMSG(!ex->ex_isdone, "xfer %p type %d status %d", xfer,
|
|
ex->ex_type, xfer->ux_status);
|
|
ex->ex_isdone = true;
|
|
#endif
|
|
|
|
DPRINTF("xfer=%#jx, pipe=%#jx ready", (uintptr_t)xfer,
|
|
(uintptr_t)epipe, 0, 0);
|
|
|
|
/* The transfer is done, compute actual length and status. */
|
|
if (ex->ex_type == EX_ISOC) {
|
|
/* HS isoc transfer */
|
|
|
|
struct ehci_soft_itd *itd;
|
|
int i, nframes, len, uframes;
|
|
|
|
nframes = 0;
|
|
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_itds(ex->ex_itdstart);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
i = xfer->ux_pipe->up_endpoint->ue_edesc->bInterval;
|
|
uframes = uimin(1 << (i - 1), USB_UFRAMES_PER_FRAME);
|
|
|
|
for (itd = ex->ex_itdstart; itd != NULL; itd = itd->xfer_next) {
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t,itd_ctl),
|
|
sizeof(itd->itd.itd_ctl),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
for (i = 0; i < EHCI_ITD_NUFRAMES; i += uframes) {
|
|
/*
|
|
* XXX - driver didn't fill in the frame full
|
|
* of uframes. This leads to scheduling
|
|
* inefficiencies, but working around
|
|
* this doubles complexity of tracking
|
|
* an xfer.
|
|
*/
|
|
if (nframes >= xfer->ux_nframes)
|
|
break;
|
|
|
|
status = le32toh(itd->itd.itd_ctl[i]);
|
|
len = EHCI_ITD_GET_LEN(status);
|
|
if (EHCI_ITD_GET_STATUS(status) != 0)
|
|
len = 0; /*No valid data on error*/
|
|
|
|
xfer->ux_frlengths[nframes++] = len;
|
|
actlen += len;
|
|
}
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t,itd_ctl),
|
|
sizeof(itd->itd.itd_ctl), BUS_DMASYNC_PREREAD);
|
|
|
|
if (nframes >= xfer->ux_nframes)
|
|
break;
|
|
}
|
|
|
|
xfer->ux_actlen = actlen;
|
|
xfer->ux_status = USBD_NORMAL_COMPLETION;
|
|
goto end;
|
|
} else if (ex->ex_type == EX_FS_ISOC) {
|
|
/* FS isoc transfer */
|
|
struct ehci_soft_sitd *sitd;
|
|
int nframes, len;
|
|
|
|
nframes = 0;
|
|
|
|
for (sitd = ex->ex_sitdstart; sitd != NULL;
|
|
sitd = sitd->xfer_next) {
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_trans),
|
|
sizeof(sitd->sitd.sitd_trans),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
/*
|
|
* XXX - driver didn't fill in the frame full
|
|
* of uframes. This leads to scheduling
|
|
* inefficiencies, but working around
|
|
* this doubles complexity of tracking
|
|
* an xfer.
|
|
*/
|
|
if (nframes >= xfer->ux_nframes)
|
|
break;
|
|
|
|
status = le32toh(sitd->sitd.sitd_trans);
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_trans),
|
|
sizeof(sitd->sitd.sitd_trans), BUS_DMASYNC_PREREAD);
|
|
|
|
len = EHCI_SITD_GET_LEN(status);
|
|
if (status & (EHCI_SITD_ERR|EHCI_SITD_BUFERR|
|
|
EHCI_SITD_BABBLE|EHCI_SITD_XACTERR|EHCI_SITD_MISS)) {
|
|
/* No valid data on error */
|
|
len = xfer->ux_frlengths[nframes];
|
|
}
|
|
|
|
/*
|
|
* frlengths[i]: # of bytes to send
|
|
* len: # of bytes host didn't send
|
|
*/
|
|
xfer->ux_frlengths[nframes] -= len;
|
|
/* frlengths[i]: # of bytes host sent */
|
|
actlen += xfer->ux_frlengths[nframes++];
|
|
|
|
if (nframes >= xfer->ux_nframes)
|
|
break;
|
|
}
|
|
|
|
xfer->ux_actlen = actlen;
|
|
xfer->ux_status = USBD_NORMAL_COMPLETION;
|
|
goto end;
|
|
}
|
|
KASSERT(ex->ex_type == EX_CTRL || ex->ex_type == EX_INTR ||
|
|
ex->ex_type == EX_BULK);
|
|
|
|
/* Continue processing xfers using queue heads */
|
|
if (ex->ex_type == EX_CTRL) {
|
|
fsqtd = ex->ex_setup;
|
|
lsqtd = ex->ex_status;
|
|
} else {
|
|
fsqtd = ex->ex_sqtdstart;
|
|
lsqtd = ex->ex_sqtdend;
|
|
}
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqtds(fsqtd);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
for (sqtd = fsqtd; sqtd != lsqtd->nextqtd; sqtd = sqtd->nextqtd) {
|
|
usb_syncmem(&sqtd->dma, sqtd->offs, sizeof(sqtd->qtd),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
nstatus = le32toh(sqtd->qtd.qtd_status);
|
|
usb_syncmem(&sqtd->dma, sqtd->offs, sizeof(sqtd->qtd),
|
|
BUS_DMASYNC_PREREAD);
|
|
if (nstatus & EHCI_QTD_ACTIVE)
|
|
break;
|
|
|
|
status = nstatus;
|
|
if (EHCI_QTD_GET_PID(status) != EHCI_QTD_PID_SETUP)
|
|
actlen += sqtd->len - EHCI_QTD_GET_BYTES(status);
|
|
}
|
|
|
|
/*
|
|
* If there are left over TDs we need to update the toggle.
|
|
* The default pipe doesn't need it since control transfers
|
|
* start the toggle at 0 every time.
|
|
* For a short transfer we need to update the toggle for the missing
|
|
* packets within the qTD.
|
|
*/
|
|
if ((sqtd != lsqtd->nextqtd || EHCI_QTD_GET_BYTES(status)) &&
|
|
xfer->ux_pipe->up_dev->ud_pipe0 != xfer->ux_pipe) {
|
|
DPRINTF("toggle update status=0x%08jx nstatus=0x%08jx",
|
|
status, nstatus, 0, 0);
|
|
#if 0
|
|
ehci_dump_sqh(epipe->sqh);
|
|
ehci_dump_sqtds(ex->ex_sqtdstart);
|
|
#endif
|
|
epipe->nexttoggle = EHCI_QTD_GET_TOGGLE(nstatus);
|
|
}
|
|
|
|
DPRINTF("len=%jd actlen=%jd status=0x%08jx", xfer->ux_length, actlen,
|
|
status, 0);
|
|
xfer->ux_actlen = actlen;
|
|
if (status & EHCI_QTD_HALTED) {
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTF("halted addr=%jd endpt=0x%02jx",
|
|
xfer->ux_pipe->up_dev->ud_addr,
|
|
xfer->ux_pipe->up_endpoint->ue_edesc->bEndpointAddress,
|
|
0, 0);
|
|
DPRINTF("cerr=%jd pid=%jd",
|
|
EHCI_QTD_GET_CERR(status), EHCI_QTD_GET_PID(status),
|
|
0, 0);
|
|
DPRINTF("active =%jd halted=%jd buferr=%jd babble=%jd",
|
|
status & EHCI_QTD_ACTIVE ? 1 : 0,
|
|
status & EHCI_QTD_HALTED ? 1 : 0,
|
|
status & EHCI_QTD_BUFERR ? 1 : 0,
|
|
status & EHCI_QTD_BABBLE ? 1 : 0);
|
|
|
|
DPRINTF("xacterr=%jd missed=%jd split =%jd ping =%jd",
|
|
status & EHCI_QTD_XACTERR ? 1 : 0,
|
|
status & EHCI_QTD_MISSEDMICRO ? 1 : 0,
|
|
status & EHCI_QTD_SPLITXSTATE ? 1 : 0,
|
|
status & EHCI_QTD_PINGSTATE ? 1 : 0);
|
|
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(epipe->sqh);
|
|
ehci_dump_sqtds(ex->ex_sqtdstart);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
/* low&full speed has an extra error flag */
|
|
if (EHCI_QH_GET_EPS(epipe->sqh->qh.qh_endp) !=
|
|
EHCI_QH_SPEED_HIGH)
|
|
status &= EHCI_QTD_STATERRS | EHCI_QTD_PINGSTATE;
|
|
else
|
|
status &= EHCI_QTD_STATERRS;
|
|
if (status == 0) /* no other errors means a stall */ {
|
|
xfer->ux_status = USBD_STALLED;
|
|
} else {
|
|
xfer->ux_status = USBD_IOERROR; /* more info XXX */
|
|
}
|
|
/* XXX need to reset TT on missed microframe */
|
|
if (status & EHCI_QTD_MISSEDMICRO) {
|
|
printf("%s: missed microframe, TT reset not "
|
|
"implemented, hub might be inoperational\n",
|
|
device_xname(sc->sc_dev));
|
|
}
|
|
} else {
|
|
xfer->ux_status = USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
end:
|
|
|
|
ehci_del_intr_list(sc, ex);
|
|
TAILQ_INSERT_TAIL(cq, ex, ex_next);
|
|
|
|
DPRINTF("ex=%#jx done", (uintptr_t)ex, 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_poll(struct usbd_bus *bus)
|
|
{
|
|
ehci_softc_t *sc = EHCI_BUS2SC(bus);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
#ifdef EHCI_DEBUG
|
|
static int last;
|
|
int new;
|
|
new = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS));
|
|
if (new != last) {
|
|
DPRINTF("intrs=0x%04jx", new, 0, 0, 0);
|
|
last = new;
|
|
}
|
|
#endif
|
|
|
|
if (EOREAD4(sc, EHCI_USBSTS) & sc->sc_eintrs) {
|
|
mutex_spin_enter(&sc->sc_intr_lock);
|
|
ehci_intr1(sc);
|
|
mutex_spin_exit(&sc->sc_intr_lock);
|
|
}
|
|
}
|
|
|
|
void
|
|
ehci_childdet(device_t self, device_t child)
|
|
{
|
|
struct ehci_softc *sc = device_private(self);
|
|
|
|
KASSERT(sc->sc_child == child);
|
|
sc->sc_child = NULL;
|
|
}
|
|
|
|
int
|
|
ehci_detach(struct ehci_softc *sc, int flags)
|
|
{
|
|
int rv = 0;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
if (sc->sc_child != NULL)
|
|
rv = config_detach(sc->sc_child, flags);
|
|
|
|
if (rv != 0)
|
|
return rv;
|
|
|
|
if (sc->sc_ncomp > 0) {
|
|
mutex_enter(&sc->sc_complock);
|
|
/* XXX try to halt callout instead of waiting */
|
|
while (sc->sc_comp_state == CO_SCHED)
|
|
cv_wait(&sc->sc_compcv, &sc->sc_complock);
|
|
mutex_exit(&sc->sc_complock);
|
|
|
|
callout_halt(&sc->sc_compcallout, NULL);
|
|
callout_destroy(&sc->sc_compcallout);
|
|
cv_destroy(&sc->sc_compcv);
|
|
mutex_destroy(&sc->sc_complock);
|
|
}
|
|
|
|
callout_halt(&sc->sc_tmo_intrlist, NULL);
|
|
callout_destroy(&sc->sc_tmo_intrlist);
|
|
|
|
/* XXX free other data structures XXX */
|
|
if (sc->sc_softitds)
|
|
kmem_free(sc->sc_softitds,
|
|
sc->sc_flsize * sizeof(ehci_soft_itd_t *));
|
|
cv_destroy(&sc->sc_doorbell);
|
|
|
|
#if 0
|
|
/* XXX destroyed in ehci_pci.c as it controls ehci_intr access */
|
|
|
|
softint_disestablish(sc->sc_doorbell_si);
|
|
softint_disestablish(sc->sc_pcd_si);
|
|
|
|
mutex_destroy(&sc->sc_lock);
|
|
mutex_destroy(&sc->sc_intr_lock);
|
|
#endif
|
|
|
|
pool_cache_destroy(sc->sc_xferpool);
|
|
|
|
EOWRITE4(sc, EHCI_CONFIGFLAG, 0);
|
|
|
|
return rv;
|
|
}
|
|
|
|
|
|
int
|
|
ehci_activate(device_t self, enum devact act)
|
|
{
|
|
struct ehci_softc *sc = device_private(self);
|
|
|
|
switch (act) {
|
|
case DVACT_DEACTIVATE:
|
|
sc->sc_dying = 1;
|
|
return 0;
|
|
default:
|
|
return EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle suspend/resume.
|
|
*
|
|
* We need to switch to polling mode here, because this routine is
|
|
* called from an interrupt context. This is all right since we
|
|
* are almost suspended anyway.
|
|
*
|
|
* Note that this power handler isn't to be registered directly; the
|
|
* bus glue needs to call out to it.
|
|
*/
|
|
bool
|
|
ehci_suspend(device_t dv, const pmf_qual_t *qual)
|
|
{
|
|
ehci_softc_t *sc = device_private(dv);
|
|
int i;
|
|
uint32_t cmd, hcr;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_spin_enter(&sc->sc_intr_lock);
|
|
sc->sc_bus.ub_usepolling++;
|
|
mutex_spin_exit(&sc->sc_intr_lock);
|
|
|
|
for (i = 1; i <= sc->sc_noport; i++) {
|
|
cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR;
|
|
if ((cmd & EHCI_PS_PO) == 0 && (cmd & EHCI_PS_PE) == EHCI_PS_PE)
|
|
EOWRITE4(sc, EHCI_PORTSC(i), cmd | EHCI_PS_SUSP);
|
|
}
|
|
|
|
sc->sc_cmd = EOREAD4(sc, EHCI_USBCMD);
|
|
|
|
cmd = sc->sc_cmd & ~(EHCI_CMD_ASE | EHCI_CMD_PSE);
|
|
EOWRITE4(sc, EHCI_USBCMD, cmd);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
hcr = EOREAD4(sc, EHCI_USBSTS) & (EHCI_STS_ASS | EHCI_STS_PSS);
|
|
if (hcr == 0)
|
|
break;
|
|
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
}
|
|
if (hcr != 0)
|
|
printf("%s: reset timeout\n", device_xname(dv));
|
|
|
|
cmd &= ~EHCI_CMD_RS;
|
|
EOWRITE4(sc, EHCI_USBCMD, cmd);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH;
|
|
if (hcr == EHCI_STS_HCH)
|
|
break;
|
|
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
}
|
|
if (hcr != EHCI_STS_HCH)
|
|
printf("%s: config timeout\n", device_xname(dv));
|
|
|
|
mutex_spin_enter(&sc->sc_intr_lock);
|
|
sc->sc_bus.ub_usepolling--;
|
|
mutex_spin_exit(&sc->sc_intr_lock);
|
|
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
ehci_resume(device_t dv, const pmf_qual_t *qual)
|
|
{
|
|
ehci_softc_t *sc = device_private(dv);
|
|
int i;
|
|
uint32_t cmd, hcr;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
/* restore things in case the bios sucks */
|
|
EOWRITE4(sc, EHCI_CTRLDSSEGMENT, 0);
|
|
EOWRITE4(sc, EHCI_PERIODICLISTBASE, DMAADDR(&sc->sc_fldma, 0));
|
|
EOWRITE4(sc, EHCI_ASYNCLISTADDR,
|
|
sc->sc_async_head->physaddr | EHCI_LINK_QH);
|
|
|
|
EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs & ~EHCI_INTR_PCIE);
|
|
|
|
EOWRITE4(sc, EHCI_USBCMD, sc->sc_cmd);
|
|
|
|
hcr = 0;
|
|
for (i = 1; i <= sc->sc_noport; i++) {
|
|
cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR;
|
|
if ((cmd & EHCI_PS_PO) == 0 &&
|
|
(cmd & EHCI_PS_SUSP) == EHCI_PS_SUSP) {
|
|
EOWRITE4(sc, EHCI_PORTSC(i), cmd | EHCI_PS_FPR);
|
|
hcr = 1;
|
|
}
|
|
}
|
|
|
|
if (hcr) {
|
|
usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT);
|
|
|
|
for (i = 1; i <= sc->sc_noport; i++) {
|
|
cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR;
|
|
if ((cmd & EHCI_PS_PO) == 0 &&
|
|
(cmd & EHCI_PS_SUSP) == EHCI_PS_SUSP)
|
|
EOWRITE4(sc, EHCI_PORTSC(i),
|
|
cmd & ~EHCI_PS_FPR);
|
|
}
|
|
}
|
|
|
|
EOWRITE4(sc, EHCI_USBCMD, sc->sc_cmd);
|
|
EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH;
|
|
if (hcr != EHCI_STS_HCH)
|
|
break;
|
|
|
|
usb_delay_ms(&sc->sc_bus, 1);
|
|
}
|
|
if (hcr == EHCI_STS_HCH)
|
|
printf("%s: config timeout\n", device_xname(dv));
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Shut down the controller when the system is going down.
|
|
*/
|
|
bool
|
|
ehci_shutdown(device_t self, int flags)
|
|
{
|
|
ehci_softc_t *sc = device_private(self);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */
|
|
EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET);
|
|
return true;
|
|
}
|
|
|
|
Static struct usbd_xfer *
|
|
ehci_allocx(struct usbd_bus *bus, unsigned int nframes)
|
|
{
|
|
struct ehci_softc *sc = EHCI_BUS2SC(bus);
|
|
struct usbd_xfer *xfer;
|
|
|
|
xfer = pool_cache_get(sc->sc_xferpool, PR_WAITOK);
|
|
if (xfer != NULL) {
|
|
memset(xfer, 0, sizeof(struct ehci_xfer));
|
|
|
|
/* Initialise this always so we can call remove on it. */
|
|
usb_init_task(&xfer->ux_aborttask, ehci_timeout_task, xfer,
|
|
USB_TASKQ_MPSAFE);
|
|
#ifdef DIAGNOSTIC
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
ex->ex_isdone = true;
|
|
xfer->ux_state = XFER_BUSY;
|
|
#endif
|
|
}
|
|
return xfer;
|
|
}
|
|
|
|
Static void
|
|
ehci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_softc *sc = EHCI_BUS2SC(bus);
|
|
struct ehci_xfer *ex __diagused = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERTMSG(xfer->ux_state == XFER_BUSY ||
|
|
xfer->ux_status == USBD_NOT_STARTED,
|
|
"xfer %p state %d\n", xfer, xfer->ux_state);
|
|
KASSERT(ex->ex_isdone || xfer->ux_status == USBD_NOT_STARTED);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
xfer->ux_state = XFER_FREE;
|
|
#endif
|
|
|
|
pool_cache_put(sc->sc_xferpool, xfer);
|
|
}
|
|
|
|
Static void
|
|
ehci_get_lock(struct usbd_bus *bus, kmutex_t **lock)
|
|
{
|
|
struct ehci_softc *sc = EHCI_BUS2SC(bus);
|
|
|
|
*lock = &sc->sc_lock;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_clear_toggle(struct usbd_pipe *pipe)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("epipe=%#jx status=0x%08jx", (uintptr_t)epipe,
|
|
epipe->sqh->qh.qh_qtd.qtd_status, 0, 0);
|
|
#ifdef EHCI_DEBUG
|
|
if (ehcidebug)
|
|
usbd_dump_pipe(pipe);
|
|
#endif
|
|
epipe->nexttoggle = 0;
|
|
}
|
|
|
|
Static void
|
|
ehci_noop(struct usbd_pipe *pipe)
|
|
{
|
|
}
|
|
|
|
#ifdef EHCI_DEBUG
|
|
/*
|
|
* Unused function - this is meant to be called from a kernel
|
|
* debugger.
|
|
*/
|
|
void
|
|
ehci_dump(void)
|
|
{
|
|
ehci_softc_t *sc = theehci;
|
|
int i;
|
|
printf("cmd=0x%08x, sts=0x%08x, ien=0x%08x\n",
|
|
EOREAD4(sc, EHCI_USBCMD),
|
|
EOREAD4(sc, EHCI_USBSTS),
|
|
EOREAD4(sc, EHCI_USBINTR));
|
|
printf("frindex=0x%08x ctrdsegm=0x%08x periodic=0x%08x async=0x%08x\n",
|
|
EOREAD4(sc, EHCI_FRINDEX),
|
|
EOREAD4(sc, EHCI_CTRLDSSEGMENT),
|
|
EOREAD4(sc, EHCI_PERIODICLISTBASE),
|
|
EOREAD4(sc, EHCI_ASYNCLISTADDR));
|
|
for (i = 1; i <= sc->sc_noport; i++)
|
|
printf("port %d status=0x%08x\n", i,
|
|
EOREAD4(sc, EHCI_PORTSC(i)));
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_regs(ehci_softc_t *sc)
|
|
{
|
|
int i;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("cmd = 0x%08jx sts = 0x%08jx ien = 0x%08jx",
|
|
EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS),
|
|
EOREAD4(sc, EHCI_USBINTR), 0);
|
|
DPRINTF("frindex = 0x%08jx ctrdsegm = 0x%08jx periodic = 0x%08jx "
|
|
"async = 0x%08jx",
|
|
EOREAD4(sc, EHCI_FRINDEX), EOREAD4(sc, EHCI_CTRLDSSEGMENT),
|
|
EOREAD4(sc, EHCI_PERIODICLISTBASE),
|
|
EOREAD4(sc, EHCI_ASYNCLISTADDR));
|
|
for (i = 1; i <= sc->sc_noport; i += 2) {
|
|
if (i == sc->sc_noport) {
|
|
DPRINTF("port %jd status = 0x%08jx", i,
|
|
EOREAD4(sc, EHCI_PORTSC(i)), 0, 0);
|
|
} else {
|
|
DPRINTF("port %jd status = 0x%08jx port %jd "
|
|
"status = 0x%08jx",
|
|
i, EOREAD4(sc, EHCI_PORTSC(i)),
|
|
i+1, EOREAD4(sc, EHCI_PORTSC(i+1)));
|
|
}
|
|
}
|
|
}
|
|
|
|
#define ehci_dump_link(link, type) do { \
|
|
DPRINTF(" link 0x%08jx (T = %jd):", \
|
|
link, \
|
|
link & EHCI_LINK_TERMINATE ? 1 : 0, 0, 0); \
|
|
if (type) { \
|
|
DPRINTF( \
|
|
" ITD = %jd QH = %jd SITD = %jd FSTN = %jd",\
|
|
EHCI_LINK_TYPE(link) == EHCI_LINK_ITD ? 1 : 0, \
|
|
EHCI_LINK_TYPE(link) == EHCI_LINK_QH ? 1 : 0, \
|
|
EHCI_LINK_TYPE(link) == EHCI_LINK_SITD ? 1 : 0, \
|
|
EHCI_LINK_TYPE(link) == EHCI_LINK_FSTN ? 1 : 0); \
|
|
} \
|
|
} while(0)
|
|
|
|
Static void
|
|
ehci_dump_sqtds(ehci_soft_qtd_t *sqtd)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
int i;
|
|
uint32_t stop = 0;
|
|
|
|
for (i = 0; sqtd && i < 20 && !stop; sqtd = sqtd->nextqtd, i++) {
|
|
ehci_dump_sqtd(sqtd);
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_next),
|
|
sizeof(sqtd->qtd),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
stop = sqtd->qtd.qtd_next & htole32(EHCI_LINK_TERMINATE);
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_next),
|
|
sizeof(sqtd->qtd), BUS_DMASYNC_PREREAD);
|
|
}
|
|
if (!stop)
|
|
DPRINTF("dump aborted, too many TDs", 0, 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_sqtd(ehci_soft_qtd_t *sqtd)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
usb_syncmem(&sqtd->dma, sqtd->offs,
|
|
sizeof(sqtd->qtd), BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
DPRINTFN(10, "QTD(%#jx) at 0x%08jx:", (uintptr_t)sqtd, sqtd->physaddr,
|
|
0, 0);
|
|
ehci_dump_qtd(&sqtd->qtd);
|
|
|
|
usb_syncmem(&sqtd->dma, sqtd->offs,
|
|
sizeof(sqtd->qtd), BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_qtd(ehci_qtd_t *qtd)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
uint32_t s = le32toh(qtd->qtd_status);
|
|
|
|
DPRINTFN(10,
|
|
" next = 0x%08jx altnext = 0x%08jx status = 0x%08jx",
|
|
qtd->qtd_next, qtd->qtd_altnext, s, 0);
|
|
DPRINTFN(10,
|
|
" toggle = %jd ioc = %jd bytes = %#jx c_page = %#jx",
|
|
EHCI_QTD_GET_TOGGLE(s), EHCI_QTD_GET_IOC(s),
|
|
EHCI_QTD_GET_BYTES(s), EHCI_QTD_GET_C_PAGE(s));
|
|
DPRINTFN(10,
|
|
" cerr = %jd pid = %jd stat = %jx",
|
|
EHCI_QTD_GET_CERR(s), EHCI_QTD_GET_PID(s), EHCI_QTD_GET_STATUS(s),
|
|
0);
|
|
DPRINTFN(10,
|
|
"active =%jd halted=%jd buferr=%jd babble=%jd",
|
|
s & EHCI_QTD_ACTIVE ? 1 : 0,
|
|
s & EHCI_QTD_HALTED ? 1 : 0,
|
|
s & EHCI_QTD_BUFERR ? 1 : 0,
|
|
s & EHCI_QTD_BABBLE ? 1 : 0);
|
|
DPRINTFN(10,
|
|
"xacterr=%jd missed=%jd split =%jd ping =%jd",
|
|
s & EHCI_QTD_XACTERR ? 1 : 0,
|
|
s & EHCI_QTD_MISSEDMICRO ? 1 : 0,
|
|
s & EHCI_QTD_SPLITXSTATE ? 1 : 0,
|
|
s & EHCI_QTD_PINGSTATE ? 1 : 0);
|
|
DPRINTFN(10,
|
|
"buffer[0] = %#jx buffer[1] = %#jx "
|
|
"buffer[2] = %#jx buffer[3] = %#jx",
|
|
le32toh(qtd->qtd_buffer[0]), le32toh(qtd->qtd_buffer[1]),
|
|
le32toh(qtd->qtd_buffer[2]), le32toh(qtd->qtd_buffer[3]));
|
|
DPRINTFN(10,
|
|
"buffer[4] = %#jx", le32toh(qtd->qtd_buffer[4]), 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_sqh(ehci_soft_qh_t *sqh)
|
|
{
|
|
ehci_qh_t *qh = &sqh->qh;
|
|
ehci_link_t link;
|
|
uint32_t endp, endphub;
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
usb_syncmem(&sqh->dma, sqh->offs,
|
|
sizeof(sqh->qh), BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
DPRINTFN(10, "QH(%#jx) at %#jx:", (uintptr_t)sqh, sqh->physaddr, 0, 0);
|
|
link = le32toh(qh->qh_link);
|
|
ehci_dump_link(link, true);
|
|
|
|
endp = le32toh(qh->qh_endp);
|
|
DPRINTFN(10, " endp = %#jx", endp, 0, 0, 0);
|
|
DPRINTFN(10, " addr = 0x%02jx inact = %jd endpt = %jd "
|
|
"eps = %jd",
|
|
EHCI_QH_GET_ADDR(endp), EHCI_QH_GET_INACT(endp),
|
|
EHCI_QH_GET_ENDPT(endp), EHCI_QH_GET_EPS(endp));
|
|
DPRINTFN(10, " dtc = %jd hrecl = %jd",
|
|
EHCI_QH_GET_DTC(endp), EHCI_QH_GET_HRECL(endp), 0, 0);
|
|
DPRINTFN(10, " ctl = %jd nrl = %jd mpl = %#jx(%jd)",
|
|
EHCI_QH_GET_CTL(endp),EHCI_QH_GET_NRL(endp),
|
|
EHCI_QH_GET_MPL(endp), EHCI_QH_GET_MPL(endp));
|
|
|
|
endphub = le32toh(qh->qh_endphub);
|
|
DPRINTFN(10, " endphub = %#jx", endphub, 0, 0, 0);
|
|
DPRINTFN(10, " smask = 0x%02jx cmask = 0x%02jx one %jx",
|
|
EHCI_QH_GET_SMASK(endphub), EHCI_QH_GET_CMASK(endphub), 1, 0);
|
|
DPRINTFN(10, " huba = 0x%02jx port = %jd mult = %jd",
|
|
EHCI_QH_GET_HUBA(endphub), EHCI_QH_GET_PORT(endphub),
|
|
EHCI_QH_GET_MULT(endphub), 0);
|
|
|
|
link = le32toh(qh->qh_curqtd);
|
|
ehci_dump_link(link, false);
|
|
DPRINTFN(10, "Overlay qTD:", 0, 0, 0, 0);
|
|
ehci_dump_qtd(&qh->qh_qtd);
|
|
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_itds(ehci_soft_itd_t *itd)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
int i;
|
|
uint32_t stop = 0;
|
|
|
|
for (i = 0; itd && i < 20 && !stop; itd = itd->xfer_next, i++) {
|
|
ehci_dump_itd(itd);
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_next),
|
|
sizeof(itd->itd),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
stop = itd->itd.itd_next & htole32(EHCI_LINK_TERMINATE);
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_next),
|
|
sizeof(itd->itd), BUS_DMASYNC_PREREAD);
|
|
}
|
|
if (!stop)
|
|
DPRINTF("dump aborted, too many TDs", 0, 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_itd(struct ehci_soft_itd *itd)
|
|
{
|
|
ehci_isoc_trans_t t;
|
|
ehci_isoc_bufr_ptr_t b, b2, b3;
|
|
int i;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("ITD: next phys = %#jx", itd->itd.itd_next, 0, 0, 0);
|
|
|
|
for (i = 0; i < EHCI_ITD_NUFRAMES; i++) {
|
|
t = le32toh(itd->itd.itd_ctl[i]);
|
|
DPRINTF("ITDctl %jd: stat = %jx len = %jx",
|
|
i, EHCI_ITD_GET_STATUS(t), EHCI_ITD_GET_LEN(t), 0);
|
|
DPRINTF(" ioc = %jx pg = %jx offs = %jx",
|
|
EHCI_ITD_GET_IOC(t), EHCI_ITD_GET_PG(t),
|
|
EHCI_ITD_GET_OFFS(t), 0);
|
|
}
|
|
DPRINTF("ITDbufr: ", 0, 0, 0, 0);
|
|
for (i = 0; i < EHCI_ITD_NBUFFERS; i++)
|
|
DPRINTF(" %jx",
|
|
EHCI_ITD_GET_BPTR(le32toh(itd->itd.itd_bufr[i])), 0, 0, 0);
|
|
|
|
b = le32toh(itd->itd.itd_bufr[0]);
|
|
b2 = le32toh(itd->itd.itd_bufr[1]);
|
|
b3 = le32toh(itd->itd.itd_bufr[2]);
|
|
DPRINTF(" ep = %jx daddr = %jx dir = %jd",
|
|
EHCI_ITD_GET_EP(b), EHCI_ITD_GET_DADDR(b), EHCI_ITD_GET_DIR(b2), 0);
|
|
DPRINTF(" maxpkt = %jx multi = %jx",
|
|
EHCI_ITD_GET_MAXPKT(b2), EHCI_ITD_GET_MULTI(b3), 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_sitd(struct ehci_soft_itd *itd)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("SITD %#jx next = %p prev = %#jx",
|
|
(uintptr_t)itd, (uintptr_t)itd->frame_list.next,
|
|
(uintptr_t)itd->frame_list.prev, 0);
|
|
DPRINTF(" xfernext=%#jx physaddr=%jX slot=%jd",
|
|
(uintptr_t)itd->xfer_next, itd->physaddr, itd->slot, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_dump_exfer(struct ehci_xfer *ex)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("ex = %#jx type %jd isdone %jd", (uintptr_t)ex, ex->ex_type,
|
|
ex->ex_isdone, 0);
|
|
|
|
switch (ex->ex_type) {
|
|
case EX_CTRL:
|
|
DPRINTF(" setup = %#jx data = %#jx status = %#jx",
|
|
(uintptr_t)ex->ex_setup, (uintptr_t)ex->ex_data,
|
|
(uintptr_t)ex->ex_status, 0);
|
|
break;
|
|
case EX_BULK:
|
|
case EX_INTR:
|
|
DPRINTF(" qtdstart = %#jx qtdend = %#jx",
|
|
(uintptr_t)ex->ex_sqtdstart, (uintptr_t)ex->ex_sqtdend,
|
|
0, 0);
|
|
break;
|
|
case EX_ISOC:
|
|
DPRINTF(" itdstart = %#jx itdend = %#jx",
|
|
(uintptr_t)ex->ex_itdstart, (uintptr_t)ex->ex_itdend, 0, 0);
|
|
break;
|
|
case EX_FS_ISOC:
|
|
DPRINTF(" sitdstart = %#jx sitdend = %#jx",
|
|
(uintptr_t)ex->ex_sitdstart, (uintptr_t)ex->ex_sitdend,
|
|
0, 0);
|
|
break;
|
|
default:
|
|
DPRINTF(" unknown type", 0, 0, 0, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
Static usbd_status
|
|
ehci_open(struct usbd_pipe *pipe)
|
|
{
|
|
struct usbd_device *dev = pipe->up_dev;
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
usb_endpoint_descriptor_t *ed = pipe->up_endpoint->ue_edesc;
|
|
uint8_t rhaddr = dev->ud_bus->ub_rhaddr;
|
|
uint8_t addr = dev->ud_addr;
|
|
uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes);
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);
|
|
ehci_soft_qh_t *sqh;
|
|
usbd_status err;
|
|
int ival, speed, naks;
|
|
int hshubaddr, hshubport;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("pipe=%#jx, addr=%jd, endpt=%jd (%jd)", (uintptr_t)pipe, addr,
|
|
ed->bEndpointAddress, rhaddr);
|
|
|
|
if (dev->ud_myhsport) {
|
|
/*
|
|
* When directly attached FS/LS device while doing embedded
|
|
* transaction translations and we are the hub, set the hub
|
|
* address to 0 (us).
|
|
*/
|
|
if (!(sc->sc_flags & EHCIF_ETTF)
|
|
|| (dev->ud_myhsport->up_parent->ud_addr != rhaddr)) {
|
|
hshubaddr = dev->ud_myhsport->up_parent->ud_addr;
|
|
} else {
|
|
hshubaddr = 0;
|
|
}
|
|
hshubport = dev->ud_myhsport->up_portno;
|
|
} else {
|
|
hshubaddr = 0;
|
|
hshubport = 0;
|
|
}
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
/* toggle state needed for bulk endpoints */
|
|
epipe->nexttoggle = pipe->up_endpoint->ue_toggle;
|
|
|
|
if (addr == rhaddr) {
|
|
switch (ed->bEndpointAddress) {
|
|
case USB_CONTROL_ENDPOINT:
|
|
pipe->up_methods = &roothub_ctrl_methods;
|
|
break;
|
|
case UE_DIR_IN | USBROOTHUB_INTR_ENDPT:
|
|
pipe->up_methods = &ehci_root_intr_methods;
|
|
break;
|
|
default:
|
|
DPRINTF("bad bEndpointAddress 0x%02jx",
|
|
ed->bEndpointAddress, 0, 0, 0);
|
|
return USBD_INVAL;
|
|
}
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
/* XXX All this stuff is only valid for async. */
|
|
switch (dev->ud_speed) {
|
|
case USB_SPEED_LOW: speed = EHCI_QH_SPEED_LOW; break;
|
|
case USB_SPEED_FULL: speed = EHCI_QH_SPEED_FULL; break;
|
|
case USB_SPEED_HIGH: speed = EHCI_QH_SPEED_HIGH; break;
|
|
default: panic("ehci_open: bad device speed %d", dev->ud_speed);
|
|
}
|
|
if (speed == EHCI_QH_SPEED_LOW && xfertype == UE_ISOCHRONOUS) {
|
|
DPRINTF("hshubaddr=%jd hshubport=%jd", hshubaddr, hshubport, 0,
|
|
0);
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
/*
|
|
* For interrupt transfer, nak throttling must be disabled, but for
|
|
* the other transfer type, nak throttling should be enabled from the
|
|
* viewpoint that avoids the memory thrashing.
|
|
*/
|
|
naks = (xfertype == UE_INTERRUPT) ? 0
|
|
: ((speed == EHCI_QH_SPEED_HIGH) ? 4 : 0);
|
|
|
|
/* Allocate sqh for everything, save isoc xfers */
|
|
if (xfertype != UE_ISOCHRONOUS) {
|
|
sqh = ehci_alloc_sqh(sc);
|
|
if (sqh == NULL)
|
|
return USBD_NOMEM;
|
|
/* qh_link filled when the QH is added */
|
|
sqh->qh.qh_endp = htole32(
|
|
EHCI_QH_SET_ADDR(addr) |
|
|
EHCI_QH_SET_ENDPT(UE_GET_ADDR(ed->bEndpointAddress)) |
|
|
EHCI_QH_SET_EPS(speed) |
|
|
EHCI_QH_DTC |
|
|
EHCI_QH_SET_MPL(UGETW(ed->wMaxPacketSize)) |
|
|
(speed != EHCI_QH_SPEED_HIGH && xfertype == UE_CONTROL ?
|
|
EHCI_QH_CTL : 0) |
|
|
EHCI_QH_SET_NRL(naks)
|
|
);
|
|
sqh->qh.qh_endphub = htole32(
|
|
EHCI_QH_SET_MULT(1) |
|
|
EHCI_QH_SET_SMASK(xfertype == UE_INTERRUPT ? 0x02 : 0)
|
|
);
|
|
if (speed != EHCI_QH_SPEED_HIGH)
|
|
sqh->qh.qh_endphub |= htole32(
|
|
EHCI_QH_SET_PORT(hshubport) |
|
|
EHCI_QH_SET_HUBA(hshubaddr) |
|
|
(xfertype == UE_INTERRUPT ?
|
|
EHCI_QH_SET_CMASK(0x08) : 0)
|
|
);
|
|
sqh->qh.qh_curqtd = EHCI_NULL;
|
|
/* Fill the overlay qTD */
|
|
sqh->qh.qh_qtd.qtd_next = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL;
|
|
sqh->qh.qh_qtd.qtd_status = htole32(0);
|
|
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
epipe->sqh = sqh;
|
|
} else {
|
|
sqh = NULL;
|
|
} /*xfertype == UE_ISOC*/
|
|
|
|
switch (xfertype) {
|
|
case UE_CONTROL:
|
|
err = usb_allocmem(&sc->sc_bus, sizeof(usb_device_request_t),
|
|
0, &epipe->ctrl.reqdma);
|
|
#ifdef EHCI_DEBUG
|
|
if (err)
|
|
printf("ehci_open: usb_allocmem()=%d\n", err);
|
|
#endif
|
|
if (err)
|
|
goto bad;
|
|
pipe->up_methods = &ehci_device_ctrl_methods;
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_add_qh(sc, sqh, sc->sc_async_head);
|
|
mutex_exit(&sc->sc_lock);
|
|
break;
|
|
case UE_BULK:
|
|
pipe->up_methods = &ehci_device_bulk_methods;
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_add_qh(sc, sqh, sc->sc_async_head);
|
|
mutex_exit(&sc->sc_lock);
|
|
break;
|
|
case UE_INTERRUPT:
|
|
pipe->up_methods = &ehci_device_intr_methods;
|
|
ival = pipe->up_interval;
|
|
if (ival == USBD_DEFAULT_INTERVAL) {
|
|
if (speed == EHCI_QH_SPEED_HIGH) {
|
|
if (ed->bInterval > 16) {
|
|
/*
|
|
* illegal with high-speed, but there
|
|
* were documentation bugs in the spec,
|
|
* so be generous
|
|
*/
|
|
ival = 256;
|
|
} else
|
|
ival = (1 << (ed->bInterval - 1)) / 8;
|
|
} else
|
|
ival = ed->bInterval;
|
|
}
|
|
err = ehci_device_setintr(sc, sqh, ival);
|
|
if (err)
|
|
goto bad;
|
|
break;
|
|
case UE_ISOCHRONOUS:
|
|
pipe->up_serialise = false;
|
|
if (speed == EHCI_QH_SPEED_HIGH)
|
|
pipe->up_methods = &ehci_device_isoc_methods;
|
|
else
|
|
pipe->up_methods = &ehci_device_fs_isoc_methods;
|
|
if (ed->bInterval == 0 || ed->bInterval > 16) {
|
|
printf("ehci: opening pipe with invalid bInterval\n");
|
|
err = USBD_INVAL;
|
|
goto bad;
|
|
}
|
|
if (UGETW(ed->wMaxPacketSize) == 0) {
|
|
printf("ehci: zero length endpoint open request\n");
|
|
err = USBD_INVAL;
|
|
goto bad;
|
|
}
|
|
epipe->isoc.next_frame = 0;
|
|
epipe->isoc.cur_xfers = 0;
|
|
break;
|
|
default:
|
|
DPRINTF("bad xfer type %jd", xfertype, 0, 0, 0);
|
|
err = USBD_INVAL;
|
|
goto bad;
|
|
}
|
|
return USBD_NORMAL_COMPLETION;
|
|
|
|
bad:
|
|
if (sqh != NULL) {
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_free_sqh(sc, sqh);
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Add an ED to the schedule. Called with USB lock held.
|
|
*/
|
|
Static void
|
|
ehci_add_qh(ehci_softc_t *sc, ehci_soft_qh_t *sqh, ehci_soft_qh_t *head)
|
|
{
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
usb_syncmem(&head->dma, head->offs + offsetof(ehci_qh_t, qh_link),
|
|
sizeof(head->qh.qh_link), BUS_DMASYNC_POSTWRITE);
|
|
|
|
sqh->next = head->next;
|
|
sqh->qh.qh_link = head->qh.qh_link;
|
|
|
|
usb_syncmem(&sqh->dma, sqh->offs + offsetof(ehci_qh_t, qh_link),
|
|
sizeof(sqh->qh.qh_link), BUS_DMASYNC_PREWRITE);
|
|
|
|
head->next = sqh;
|
|
head->qh.qh_link = htole32(sqh->physaddr | EHCI_LINK_QH);
|
|
|
|
usb_syncmem(&head->dma, head->offs + offsetof(ehci_qh_t, qh_link),
|
|
sizeof(head->qh.qh_link), BUS_DMASYNC_PREWRITE);
|
|
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Remove an ED from the schedule. Called with USB lock held.
|
|
*/
|
|
Static void
|
|
ehci_rem_qh(ehci_softc_t *sc, ehci_soft_qh_t *sqh, ehci_soft_qh_t *head)
|
|
{
|
|
ehci_soft_qh_t *p;
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
/* XXX */
|
|
for (p = head; p != NULL && p->next != sqh; p = p->next)
|
|
;
|
|
if (p == NULL)
|
|
panic("ehci_rem_qh: ED not found");
|
|
usb_syncmem(&sqh->dma, sqh->offs + offsetof(ehci_qh_t, qh_link),
|
|
sizeof(sqh->qh.qh_link), BUS_DMASYNC_POSTWRITE);
|
|
p->next = sqh->next;
|
|
p->qh.qh_link = sqh->qh.qh_link;
|
|
usb_syncmem(&p->dma, p->offs + offsetof(ehci_qh_t, qh_link),
|
|
sizeof(p->qh.qh_link), BUS_DMASYNC_PREWRITE);
|
|
|
|
ehci_sync_hc(sc);
|
|
}
|
|
|
|
Static void
|
|
ehci_set_qh_qtd(ehci_soft_qh_t *sqh, ehci_soft_qtd_t *sqtd)
|
|
{
|
|
int i;
|
|
uint32_t status;
|
|
|
|
/* Save toggle bit and ping status. */
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
status = sqh->qh.qh_qtd.qtd_status &
|
|
htole32(EHCI_QTD_TOGGLE_MASK |
|
|
EHCI_QTD_SET_STATUS(EHCI_QTD_PINGSTATE));
|
|
/* Set HALTED to make hw leave it alone. */
|
|
sqh->qh.qh_qtd.qtd_status =
|
|
htole32(EHCI_QTD_SET_STATUS(EHCI_QTD_HALTED));
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status),
|
|
sizeof(sqh->qh.qh_qtd.qtd_status),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
sqh->qh.qh_curqtd = 0;
|
|
sqh->qh.qh_qtd.qtd_next = htole32(sqtd->physaddr);
|
|
sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL;
|
|
for (i = 0; i < EHCI_QTD_NBUFFERS; i++)
|
|
sqh->qh.qh_qtd.qtd_buffer[i] = 0;
|
|
sqh->sqtd = sqtd;
|
|
usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
/* Set !HALTED && !ACTIVE to start execution, preserve some fields */
|
|
sqh->qh.qh_qtd.qtd_status = status;
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status),
|
|
sizeof(sqh->qh.qh_qtd.qtd_status),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
/*
|
|
* Ensure that the HC has released all references to the QH. We do this
|
|
* by asking for a Async Advance Doorbell interrupt and then we wait for
|
|
* the interrupt.
|
|
* To make this easier we first obtain exclusive use of the doorbell.
|
|
*/
|
|
Static void
|
|
ehci_sync_hc(ehci_softc_t *sc)
|
|
{
|
|
int error __diagused;
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
if (sc->sc_dying) {
|
|
DPRINTF("dying", 0, 0, 0, 0);
|
|
return;
|
|
}
|
|
|
|
/* ask for doorbell */
|
|
EOWRITE4(sc, EHCI_USBCMD, EOREAD4(sc, EHCI_USBCMD) | EHCI_CMD_IAAD);
|
|
DPRINTF("cmd = 0x%08jx sts = 0x%08jx",
|
|
EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS), 0, 0);
|
|
|
|
error = cv_timedwait(&sc->sc_doorbell, &sc->sc_lock, hz); /* bell wait */
|
|
|
|
DPRINTF("cmd = 0x%08jx sts = 0x%08jx ... done",
|
|
EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS), 0, 0);
|
|
#ifdef DIAGNOSTIC
|
|
if (error == EWOULDBLOCK) {
|
|
printf("ehci_sync_hc: timed out\n");
|
|
} else if (error) {
|
|
printf("ehci_sync_hc: cv_timedwait: error %d\n", error);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
Static void
|
|
ehci_remove_itd_chain(ehci_softc_t *sc, struct ehci_soft_itd *itd)
|
|
{
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
for (; itd != NULL; itd = itd->xfer_next) {
|
|
struct ehci_soft_itd *prev = itd->frame_list.prev;
|
|
|
|
/* Unlink itd from hardware chain, or frame array */
|
|
if (prev == NULL) { /* We're at the table head */
|
|
sc->sc_softitds[itd->slot] = itd->frame_list.next;
|
|
sc->sc_flist[itd->slot] = itd->itd.itd_next;
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * itd->slot,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
if (itd->frame_list.next != NULL)
|
|
itd->frame_list.next->frame_list.prev = NULL;
|
|
} else {
|
|
/* XXX this part is untested... */
|
|
prev->itd.itd_next = itd->itd.itd_next;
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_next),
|
|
sizeof(itd->itd.itd_next), BUS_DMASYNC_PREWRITE);
|
|
|
|
prev->frame_list.next = itd->frame_list.next;
|
|
if (itd->frame_list.next != NULL)
|
|
itd->frame_list.next->frame_list.prev = prev;
|
|
}
|
|
}
|
|
}
|
|
|
|
Static void
|
|
ehci_free_itd_chain(ehci_softc_t *sc, struct ehci_soft_itd *itd)
|
|
{
|
|
struct ehci_soft_itd *next;
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
next = NULL;
|
|
for (; itd != NULL; itd = next) {
|
|
next = itd->xfer_next;
|
|
ehci_free_itd_locked(sc, itd);
|
|
}
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static void
|
|
ehci_remove_sitd_chain(ehci_softc_t *sc, struct ehci_soft_sitd *sitd)
|
|
{
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
for (; sitd != NULL; sitd = sitd->xfer_next) {
|
|
struct ehci_soft_sitd *prev = sitd->frame_list.prev;
|
|
|
|
/* Unlink sitd from hardware chain, or frame array */
|
|
if (prev == NULL) { /* We're at the table head */
|
|
sc->sc_softsitds[sitd->slot] = sitd->frame_list.next;
|
|
sc->sc_flist[sitd->slot] = sitd->sitd.sitd_next;
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * sitd->slot,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
if (sitd->frame_list.next != NULL)
|
|
sitd->frame_list.next->frame_list.prev = NULL;
|
|
} else {
|
|
/* XXX this part is untested... */
|
|
prev->sitd.sitd_next = sitd->sitd.sitd_next;
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_next),
|
|
sizeof(sitd->sitd.sitd_next), BUS_DMASYNC_PREWRITE);
|
|
|
|
prev->frame_list.next = sitd->frame_list.next;
|
|
if (sitd->frame_list.next != NULL)
|
|
sitd->frame_list.next->frame_list.prev = prev;
|
|
}
|
|
}
|
|
}
|
|
|
|
Static void
|
|
ehci_free_sitd_chain(ehci_softc_t *sc, struct ehci_soft_sitd *sitd)
|
|
{
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
struct ehci_soft_sitd *next = NULL;
|
|
for (; sitd != NULL; sitd = next) {
|
|
next = sitd->xfer_next;
|
|
ehci_free_sitd_locked(sc, sitd);
|
|
}
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
/***********/
|
|
|
|
Static int
|
|
ehci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req,
|
|
void *buf, int buflen)
|
|
{
|
|
ehci_softc_t *sc = EHCI_BUS2SC(bus);
|
|
usb_hub_descriptor_t hubd;
|
|
usb_port_status_t ps;
|
|
uint16_t len, value, index;
|
|
int l, totlen = 0;
|
|
int port, i;
|
|
uint32_t v;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
if (sc->sc_dying)
|
|
return -1;
|
|
|
|
DPRINTF("type=0x%02jx request=%02jx", req->bmRequestType, req->bRequest,
|
|
0, 0);
|
|
|
|
len = UGETW(req->wLength);
|
|
value = UGETW(req->wValue);
|
|
index = UGETW(req->wIndex);
|
|
|
|
#define C(x,y) ((x) | ((y) << 8))
|
|
switch (C(req->bRequest, req->bmRequestType)) {
|
|
case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
|
|
if (len == 0)
|
|
break;
|
|
switch (value) {
|
|
#define sd ((usb_string_descriptor_t *)buf)
|
|
case C(2, UDESC_STRING):
|
|
/* Product */
|
|
totlen = usb_makestrdesc(sd, len, "EHCI root hub");
|
|
break;
|
|
#undef sd
|
|
default:
|
|
/* default from usbroothub */
|
|
return buflen;
|
|
}
|
|
break;
|
|
|
|
/* Hub requests */
|
|
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
|
|
break;
|
|
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
|
|
DPRINTF("UR_CLEAR_PORT_FEATURE port=%jd feature=%jd", index,
|
|
value, 0, 0);
|
|
if (index < 1 || index > sc->sc_noport) {
|
|
return -1;
|
|
}
|
|
port = EHCI_PORTSC(index);
|
|
v = EOREAD4(sc, port);
|
|
DPRINTF("portsc=0x%08jx", v, 0, 0, 0);
|
|
v &= ~EHCI_PS_CLEAR;
|
|
switch (value) {
|
|
case UHF_PORT_ENABLE:
|
|
EOWRITE4(sc, port, v &~ EHCI_PS_PE);
|
|
break;
|
|
case UHF_PORT_SUSPEND:
|
|
if (!(v & EHCI_PS_SUSP)) /* not suspended */
|
|
break;
|
|
v &= ~EHCI_PS_SUSP;
|
|
EOWRITE4(sc, port, v | EHCI_PS_FPR);
|
|
/* see USB2 spec ch. 7.1.7.7 */
|
|
usb_delay_ms(&sc->sc_bus, 20);
|
|
EOWRITE4(sc, port, v);
|
|
usb_delay_ms(&sc->sc_bus, 2);
|
|
#ifdef DEBUG
|
|
v = EOREAD4(sc, port);
|
|
if (v & (EHCI_PS_FPR | EHCI_PS_SUSP))
|
|
printf("ehci: resume failed: %x\n", v);
|
|
#endif
|
|
break;
|
|
case UHF_PORT_POWER:
|
|
if (sc->sc_hasppc)
|
|
EOWRITE4(sc, port, v &~ EHCI_PS_PP);
|
|
break;
|
|
case UHF_PORT_TEST:
|
|
DPRINTF("clear port test %jd", index, 0, 0, 0);
|
|
break;
|
|
case UHF_PORT_INDICATOR:
|
|
DPRINTF("clear port ind %jd", index, 0, 0, 0);
|
|
EOWRITE4(sc, port, v &~ EHCI_PS_PIC);
|
|
break;
|
|
case UHF_C_PORT_CONNECTION:
|
|
EOWRITE4(sc, port, v | EHCI_PS_CSC);
|
|
break;
|
|
case UHF_C_PORT_ENABLE:
|
|
EOWRITE4(sc, port, v | EHCI_PS_PEC);
|
|
break;
|
|
case UHF_C_PORT_SUSPEND:
|
|
/* how? */
|
|
break;
|
|
case UHF_C_PORT_OVER_CURRENT:
|
|
EOWRITE4(sc, port, v | EHCI_PS_OCC);
|
|
break;
|
|
case UHF_C_PORT_RESET:
|
|
sc->sc_isreset[index] = 0;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
#if 0
|
|
switch(value) {
|
|
case UHF_C_PORT_CONNECTION:
|
|
case UHF_C_PORT_ENABLE:
|
|
case UHF_C_PORT_SUSPEND:
|
|
case UHF_C_PORT_OVER_CURRENT:
|
|
case UHF_C_PORT_RESET:
|
|
default:
|
|
break;
|
|
}
|
|
#endif
|
|
break;
|
|
case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
|
|
if (len == 0)
|
|
break;
|
|
if ((value & 0xff) != 0) {
|
|
return -1;
|
|
}
|
|
totlen = uimin(buflen, sizeof(hubd));
|
|
memcpy(&hubd, buf, totlen);
|
|
hubd.bNbrPorts = sc->sc_noport;
|
|
v = EOREAD4(sc, EHCI_HCSPARAMS);
|
|
USETW(hubd.wHubCharacteristics,
|
|
EHCI_HCS_PPC(v) ? UHD_PWR_INDIVIDUAL : UHD_PWR_NO_SWITCH |
|
|
EHCI_HCS_P_INDICATOR(EREAD4(sc, EHCI_HCSPARAMS))
|
|
? UHD_PORT_IND : 0);
|
|
hubd.bPwrOn2PwrGood = 200; /* XXX can't find out? */
|
|
for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8)
|
|
hubd.DeviceRemovable[i++] = 0; /* XXX can't find out? */
|
|
hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i;
|
|
totlen = uimin(totlen, hubd.bDescLength);
|
|
memcpy(buf, &hubd, totlen);
|
|
break;
|
|
case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
|
|
if (len != 4) {
|
|
return -1;
|
|
}
|
|
memset(buf, 0, len); /* ? XXX */
|
|
totlen = len;
|
|
break;
|
|
case C(UR_GET_STATUS, UT_READ_CLASS_OTHER):
|
|
DPRINTF("get port status i=%jd", index, 0, 0, 0);
|
|
if (index < 1 || index > sc->sc_noport) {
|
|
return -1;
|
|
}
|
|
if (len != 4) {
|
|
return -1;
|
|
}
|
|
v = EOREAD4(sc, EHCI_PORTSC(index));
|
|
DPRINTF("port status=0x%04jx", v, 0, 0, 0);
|
|
|
|
i = UPS_HIGH_SPEED;
|
|
if (sc->sc_flags & EHCIF_ETTF) {
|
|
/*
|
|
* If we are doing embedded transaction translation,
|
|
* then directly attached LS/FS devices are reset by
|
|
* the EHCI controller itself. PSPD is encoded
|
|
* the same way as in USBSTATUS.
|
|
*/
|
|
i = __SHIFTOUT(v, EHCI_PS_PSPD) * UPS_LOW_SPEED;
|
|
}
|
|
if (v & EHCI_PS_CS) i |= UPS_CURRENT_CONNECT_STATUS;
|
|
if (v & EHCI_PS_PE) i |= UPS_PORT_ENABLED;
|
|
if (v & EHCI_PS_SUSP) i |= UPS_SUSPEND;
|
|
if (v & EHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR;
|
|
if (v & EHCI_PS_PR) i |= UPS_RESET;
|
|
if (v & EHCI_PS_PP) i |= UPS_PORT_POWER;
|
|
if (sc->sc_vendor_port_status)
|
|
i = sc->sc_vendor_port_status(sc, v, i);
|
|
USETW(ps.wPortStatus, i);
|
|
i = 0;
|
|
if (v & EHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS;
|
|
if (v & EHCI_PS_PEC) i |= UPS_C_PORT_ENABLED;
|
|
if (v & EHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR;
|
|
if (sc->sc_isreset[index]) i |= UPS_C_PORT_RESET;
|
|
USETW(ps.wPortChange, i);
|
|
totlen = uimin(len, sizeof(ps));
|
|
memcpy(buf, &ps, totlen);
|
|
break;
|
|
case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE):
|
|
return -1;
|
|
case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE):
|
|
break;
|
|
case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
|
|
if (index < 1 || index > sc->sc_noport) {
|
|
return -1;
|
|
}
|
|
port = EHCI_PORTSC(index);
|
|
v = EOREAD4(sc, port);
|
|
DPRINTF("portsc=0x%08jx", v, 0, 0, 0);
|
|
v &= ~EHCI_PS_CLEAR;
|
|
switch(value) {
|
|
case UHF_PORT_ENABLE:
|
|
EOWRITE4(sc, port, v | EHCI_PS_PE);
|
|
break;
|
|
case UHF_PORT_SUSPEND:
|
|
EOWRITE4(sc, port, v | EHCI_PS_SUSP);
|
|
break;
|
|
case UHF_PORT_RESET:
|
|
DPRINTF("reset port %jd", index, 0, 0, 0);
|
|
if (EHCI_PS_IS_LOWSPEED(v)
|
|
&& sc->sc_ncomp > 0
|
|
&& !(sc->sc_flags & EHCIF_ETTF)) {
|
|
/*
|
|
* Low speed device on non-ETTF controller or
|
|
* unaccompanied controller, give up ownership.
|
|
*/
|
|
ehci_disown(sc, index, 1);
|
|
break;
|
|
}
|
|
/* Start reset sequence. */
|
|
v &= ~ (EHCI_PS_PE | EHCI_PS_PR);
|
|
EOWRITE4(sc, port, v | EHCI_PS_PR);
|
|
/* Wait for reset to complete. */
|
|
usb_delay_ms(&sc->sc_bus, USB_PORT_ROOT_RESET_DELAY);
|
|
if (sc->sc_dying) {
|
|
return -1;
|
|
}
|
|
/*
|
|
* An embedded transaction translator will automatically
|
|
* terminate the reset sequence so there's no need to
|
|
* it.
|
|
*/
|
|
v = EOREAD4(sc, port);
|
|
if (v & EHCI_PS_PR) {
|
|
/* Terminate reset sequence. */
|
|
EOWRITE4(sc, port, v & ~EHCI_PS_PR);
|
|
/* Wait for HC to complete reset. */
|
|
usb_delay_ms(&sc->sc_bus,
|
|
EHCI_PORT_RESET_COMPLETE);
|
|
if (sc->sc_dying) {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
v = EOREAD4(sc, port);
|
|
DPRINTF("ehci after reset, status=0x%08jx", v, 0, 0, 0);
|
|
if (v & EHCI_PS_PR) {
|
|
printf("%s: port reset timeout\n",
|
|
device_xname(sc->sc_dev));
|
|
return USBD_TIMEOUT;
|
|
}
|
|
if (!(v & EHCI_PS_PE)) {
|
|
/* Not a high speed device, give up ownership.*/
|
|
ehci_disown(sc, index, 0);
|
|
break;
|
|
}
|
|
sc->sc_isreset[index] = 1;
|
|
DPRINTF("ehci port %jd reset, status = 0x%08jx", index,
|
|
v, 0, 0);
|
|
break;
|
|
case UHF_PORT_POWER:
|
|
DPRINTF("set port power %jd (has PPC = %jd)", index,
|
|
sc->sc_hasppc, 0, 0);
|
|
if (sc->sc_hasppc)
|
|
EOWRITE4(sc, port, v | EHCI_PS_PP);
|
|
break;
|
|
case UHF_PORT_TEST:
|
|
DPRINTF("set port test %jd", index, 0, 0, 0);
|
|
break;
|
|
case UHF_PORT_INDICATOR:
|
|
DPRINTF("set port ind %jd", index, 0, 0, 0);
|
|
EOWRITE4(sc, port, v | EHCI_PS_PIC);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
break;
|
|
case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER):
|
|
case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER):
|
|
case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER):
|
|
case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER):
|
|
break;
|
|
default:
|
|
/* default from usbroothub */
|
|
DPRINTF("returning %jd (usbroothub default)", buflen, 0, 0, 0);
|
|
|
|
return buflen;
|
|
}
|
|
|
|
DPRINTF("returning %jd", totlen, 0, 0, 0);
|
|
|
|
return totlen;
|
|
}
|
|
|
|
/*
|
|
* Handle ehci hand-off in early boot vs RB_ASKNAME/RB_SINGLE.
|
|
*
|
|
* This pile of garbage below works around the following problem without
|
|
* holding boots with no hand-over devices present, while penalising
|
|
* boots where the first ehci probe hands off devices with a 5 second
|
|
* delay, if RB_ASKNAME/RB_SINGLE is set. This is typically not a problem
|
|
* for RB_SINGLE, but the same basic issue exists.
|
|
*
|
|
* The way ehci hand-off works, the companion controller does not get the
|
|
* device until after its' initial bus explore, so the reference dropped
|
|
* after the first explore is not enough. 5 seconds should be enough,
|
|
* and EHCI_DISOWN_DELAY_SECONDS can be set to another value.
|
|
*
|
|
* There are 3 states. CO_EARLY is set during attach. CO_SCHED is set
|
|
* if the callback is scheduled. CO_DONE is set when the callout has
|
|
* called config_pending_decr().
|
|
*
|
|
* There's a mutex, a cv and a callout here, and we delay detach if the
|
|
* callout has been set.
|
|
*/
|
|
#ifndef EHCI_DISOWN_DELAY_SECONDS
|
|
#define EHCI_DISOWN_DELAY_SECONDS 5
|
|
#endif
|
|
static int ehci_disown_delay_seconds = EHCI_DISOWN_DELAY_SECONDS;
|
|
|
|
static void
|
|
ehci_disown_callback(void *arg)
|
|
{
|
|
ehci_softc_t *sc = arg;
|
|
|
|
config_pending_decr(sc->sc_dev);
|
|
|
|
mutex_enter(&sc->sc_complock);
|
|
KASSERT(sc->sc_comp_state == CO_SCHED);
|
|
sc->sc_comp_state = CO_DONE;
|
|
cv_signal(&sc->sc_compcv);
|
|
mutex_exit(&sc->sc_complock);
|
|
}
|
|
|
|
static void
|
|
ehci_disown_sched_callback(ehci_softc_t *sc)
|
|
{
|
|
extern bool root_is_mounted;
|
|
|
|
mutex_enter(&sc->sc_complock);
|
|
|
|
if (root_is_mounted ||
|
|
(boothowto & (RB_ASKNAME|RB_SINGLE)) == 0 ||
|
|
sc->sc_comp_state != CO_EARLY) {
|
|
mutex_exit(&sc->sc_complock);
|
|
return;
|
|
}
|
|
|
|
callout_reset(&sc->sc_compcallout, ehci_disown_delay_seconds * hz,
|
|
ehci_disown_callback, &sc->sc_dev);
|
|
sc->sc_comp_state = CO_SCHED;
|
|
|
|
mutex_exit(&sc->sc_complock);
|
|
|
|
config_pending_incr(sc->sc_dev);
|
|
aprint_normal("delaying %s by %u seconds due to USB owner change.",
|
|
(boothowto & RB_ASKNAME) == 0 ? "ask root" : "single user",
|
|
ehci_disown_delay_seconds);
|
|
}
|
|
|
|
Static void
|
|
ehci_disown(ehci_softc_t *sc, int index, int lowspeed)
|
|
{
|
|
int port;
|
|
uint32_t v;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("index=%jd lowspeed=%jd", index, lowspeed, 0, 0);
|
|
if (sc->sc_npcomp != 0) {
|
|
int i = (index-1) / sc->sc_npcomp;
|
|
if (i < sc->sc_ncomp) {
|
|
ehci_disown_sched_callback(sc);
|
|
#ifdef DIAGNOSTIC
|
|
printf("%s: handing over %s speed device on "
|
|
"port %d to %s\n",
|
|
device_xname(sc->sc_dev),
|
|
lowspeed ? "low" : "full",
|
|
index, sc->sc_comps[i] ?
|
|
device_xname(sc->sc_comps[i]) :
|
|
"companion controller");
|
|
} else {
|
|
printf("%s: strange port\n",
|
|
device_xname(sc->sc_dev));
|
|
#endif
|
|
}
|
|
} else {
|
|
#ifdef DIAGNOSTIC
|
|
printf("%s: npcomp == 0\n", device_xname(sc->sc_dev));
|
|
#endif
|
|
}
|
|
port = EHCI_PORTSC(index);
|
|
v = EOREAD4(sc, port) &~ EHCI_PS_CLEAR;
|
|
EOWRITE4(sc, port, v | EHCI_PS_PO);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_root_intr_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status err;
|
|
|
|
/* Insert last in queue. */
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Pipe isn't running, start first */
|
|
return ehci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_root_intr_start(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
const bool polling = sc->sc_bus.ub_usepolling;
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
if (!polling)
|
|
mutex_enter(&sc->sc_lock);
|
|
sc->sc_intrxfer = xfer;
|
|
if (!polling)
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
/* Abort a root interrupt request. */
|
|
Static void
|
|
ehci_root_intr_abort(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
KASSERT(xfer->ux_pipe->up_intrxfer == xfer);
|
|
|
|
sc->sc_intrxfer = NULL;
|
|
|
|
xfer->ux_status = USBD_CANCELLED;
|
|
usb_transfer_complete(xfer);
|
|
}
|
|
|
|
/* Close the root pipe. */
|
|
Static void
|
|
ehci_root_intr_close(struct usbd_pipe *pipe)
|
|
{
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
sc->sc_intrxfer = NULL;
|
|
}
|
|
|
|
Static void
|
|
ehci_root_intr_done(struct usbd_xfer *xfer)
|
|
{
|
|
}
|
|
|
|
/************************/
|
|
|
|
Static ehci_soft_qh_t *
|
|
ehci_alloc_sqh(ehci_softc_t *sc)
|
|
{
|
|
ehci_soft_qh_t *sqh;
|
|
usbd_status err;
|
|
int i, offs;
|
|
usb_dma_t dma;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
if (sc->sc_freeqhs == NULL) {
|
|
DPRINTF("allocating chunk", 0, 0, 0, 0);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
err = usb_allocmem(&sc->sc_bus, EHCI_SQH_SIZE * EHCI_SQH_CHUNK,
|
|
EHCI_PAGE_SIZE, &dma);
|
|
#ifdef EHCI_DEBUG
|
|
if (err)
|
|
printf("ehci_alloc_sqh: usb_allocmem()=%d\n", err);
|
|
#endif
|
|
if (err)
|
|
return NULL;
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
for (i = 0; i < EHCI_SQH_CHUNK; i++) {
|
|
offs = i * EHCI_SQH_SIZE;
|
|
sqh = KERNADDR(&dma, offs);
|
|
sqh->physaddr = DMAADDR(&dma, offs);
|
|
sqh->dma = dma;
|
|
sqh->offs = offs;
|
|
sqh->next = sc->sc_freeqhs;
|
|
sc->sc_freeqhs = sqh;
|
|
}
|
|
}
|
|
sqh = sc->sc_freeqhs;
|
|
sc->sc_freeqhs = sqh->next;
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
memset(&sqh->qh, 0, sizeof(ehci_qh_t));
|
|
sqh->next = NULL;
|
|
return sqh;
|
|
}
|
|
|
|
Static void
|
|
ehci_free_sqh(ehci_softc_t *sc, ehci_soft_qh_t *sqh)
|
|
{
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
sqh->next = sc->sc_freeqhs;
|
|
sc->sc_freeqhs = sqh;
|
|
}
|
|
|
|
Static ehci_soft_qtd_t *
|
|
ehci_alloc_sqtd(ehci_softc_t *sc)
|
|
{
|
|
ehci_soft_qtd_t *sqtd = NULL;
|
|
usbd_status err;
|
|
int i, offs;
|
|
usb_dma_t dma;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
if (sc->sc_freeqtds == NULL) {
|
|
DPRINTF("allocating chunk", 0, 0, 0, 0);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
err = usb_allocmem(&sc->sc_bus, EHCI_SQTD_SIZE*EHCI_SQTD_CHUNK,
|
|
EHCI_PAGE_SIZE, &dma);
|
|
#ifdef EHCI_DEBUG
|
|
if (err)
|
|
printf("ehci_alloc_sqtd: usb_allocmem()=%d\n", err);
|
|
#endif
|
|
if (err)
|
|
goto done;
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
for (i = 0; i < EHCI_SQTD_CHUNK; i++) {
|
|
offs = i * EHCI_SQTD_SIZE;
|
|
sqtd = KERNADDR(&dma, offs);
|
|
sqtd->physaddr = DMAADDR(&dma, offs);
|
|
sqtd->dma = dma;
|
|
sqtd->offs = offs;
|
|
|
|
sqtd->nextqtd = sc->sc_freeqtds;
|
|
sc->sc_freeqtds = sqtd;
|
|
}
|
|
}
|
|
|
|
sqtd = sc->sc_freeqtds;
|
|
sc->sc_freeqtds = sqtd->nextqtd;
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
memset(&sqtd->qtd, 0, sizeof(ehci_qtd_t));
|
|
sqtd->nextqtd = NULL;
|
|
sqtd->xfer = NULL;
|
|
|
|
done:
|
|
return sqtd;
|
|
}
|
|
|
|
Static void
|
|
ehci_free_sqtd(ehci_softc_t *sc, ehci_soft_qtd_t *sqtd)
|
|
{
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
sqtd->nextqtd = sc->sc_freeqtds;
|
|
sc->sc_freeqtds = sqtd;
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static int
|
|
ehci_alloc_sqtd_chain(ehci_softc_t *sc, struct usbd_xfer *xfer,
|
|
int alen, int rd, ehci_soft_qtd_t **sp)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
uint16_t flags = xfer->ux_flags;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
ASSERT_SLEEPABLE();
|
|
KASSERT(sp);
|
|
KASSERT(alen != 0 || (!rd && (flags & USBD_FORCE_SHORT_XFER)));
|
|
|
|
size_t nsqtd = (!rd && (flags & USBD_FORCE_SHORT_XFER)) ? 1 : 0;
|
|
nsqtd += ((alen + EHCI_PAGE_SIZE - 1) / EHCI_PAGE_SIZE);
|
|
exfer->ex_sqtds = kmem_zalloc(sizeof(ehci_soft_qtd_t *) * nsqtd,
|
|
KM_SLEEP);
|
|
exfer->ex_nsqtd = nsqtd;
|
|
|
|
DPRINTF("xfer %#jx len %jd nsqtd %jd flags %jx", (uintptr_t)xfer,
|
|
alen, nsqtd, flags);
|
|
|
|
for (size_t j = 0; j < exfer->ex_nsqtd;) {
|
|
ehci_soft_qtd_t *cur = ehci_alloc_sqtd(sc);
|
|
if (cur == NULL)
|
|
goto nomem;
|
|
exfer->ex_sqtds[j++] = cur;
|
|
|
|
cur->xfer = xfer;
|
|
cur->len = 0;
|
|
|
|
}
|
|
|
|
*sp = exfer->ex_sqtds[0];
|
|
DPRINTF("return sqtd=%#jx", (uintptr_t)*sp, 0, 0, 0);
|
|
|
|
return 0;
|
|
|
|
nomem:
|
|
ehci_free_sqtds(sc, exfer);
|
|
kmem_free(exfer->ex_sqtds, sizeof(ehci_soft_qtd_t *) * nsqtd);
|
|
DPRINTF("no memory", 0, 0, 0, 0);
|
|
return ENOMEM;
|
|
}
|
|
|
|
Static void
|
|
ehci_free_sqtds(ehci_softc_t *sc, struct ehci_xfer *exfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
DPRINTF("exfer=%#jx", (uintptr_t)exfer, 0, 0, 0);
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
for (size_t i = 0; i < exfer->ex_nsqtd; i++) {
|
|
ehci_soft_qtd_t *sqtd = exfer->ex_sqtds[i];
|
|
|
|
if (sqtd == NULL)
|
|
break;
|
|
|
|
sqtd->nextqtd = sc->sc_freeqtds;
|
|
sc->sc_freeqtds = sqtd;
|
|
}
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static void
|
|
ehci_append_sqtd(ehci_soft_qtd_t *sqtd, ehci_soft_qtd_t *prev)
|
|
{
|
|
if (prev) {
|
|
prev->nextqtd = sqtd;
|
|
prev->qtd.qtd_next = htole32(sqtd->physaddr);
|
|
prev->qtd.qtd_altnext = prev->qtd.qtd_next;
|
|
usb_syncmem(&prev->dma, prev->offs, sizeof(prev->qtd),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
}
|
|
}
|
|
|
|
Static void
|
|
ehci_reset_sqtd_chain(ehci_softc_t *sc, struct usbd_xfer *xfer,
|
|
int length, int isread, int *toggle, ehci_soft_qtd_t **lsqtd)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
usb_dma_t *dma = &xfer->ux_dmabuf;
|
|
uint16_t flags = xfer->ux_flags;
|
|
ehci_soft_qtd_t *sqtd, *prev;
|
|
int tog = *toggle;
|
|
int mps = UGETW(xfer->ux_pipe->up_endpoint->ue_edesc->wMaxPacketSize);
|
|
int len = length;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
DPRINTF("xfer=%#jx len %jd isread %jd toggle %jd", (uintptr_t)xfer,
|
|
len, isread, tog);
|
|
DPRINTF(" VA %#jx", (uintptr_t)KERNADDR(&xfer->ux_dmabuf, 0),
|
|
0, 0, 0);
|
|
|
|
KASSERT(length != 0 || (!isread && (flags & USBD_FORCE_SHORT_XFER)));
|
|
|
|
const uint32_t qtdstatus = EHCI_QTD_ACTIVE |
|
|
EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_IN : EHCI_QTD_PID_OUT) |
|
|
EHCI_QTD_SET_CERR(3)
|
|
;
|
|
|
|
sqtd = prev = NULL;
|
|
size_t curoffs = 0;
|
|
size_t j = 0;
|
|
for (; len != 0 && j < exfer->ex_nsqtd; prev = sqtd) {
|
|
sqtd = exfer->ex_sqtds[j++];
|
|
DPRINTF("sqtd[%jd]=%#jx prev %#jx", j, (uintptr_t)sqtd,
|
|
(uintptr_t)prev, 0);
|
|
|
|
/*
|
|
* The EHCI hardware can handle at most 5 pages and they do
|
|
* not have to be contiguous
|
|
*/
|
|
vaddr_t va = (vaddr_t)KERNADDR(dma, curoffs);
|
|
vaddr_t va_offs = EHCI_PAGE_OFFSET(va);
|
|
size_t curlen = len;
|
|
if (curlen >= EHCI_QTD_MAXTRANSFER - va_offs) {
|
|
/* must use multiple TDs, fill as much as possible. */
|
|
curlen = EHCI_QTD_MAXTRANSFER - va_offs;
|
|
|
|
/* the length must be a multiple of the max size */
|
|
curlen -= curlen % mps;
|
|
}
|
|
KASSERT(curlen != 0);
|
|
DPRINTF(" len=%jd curlen=%jd curoffs=%ju", len, curlen,
|
|
curoffs, 0);
|
|
|
|
/* Fill the qTD */
|
|
sqtd->qtd.qtd_next = sqtd->qtd.qtd_altnext = EHCI_NULL;
|
|
sqtd->qtd.qtd_status = htole32(
|
|
qtdstatus |
|
|
EHCI_QTD_SET_BYTES(curlen) |
|
|
EHCI_QTD_SET_TOGGLE(tog));
|
|
|
|
/* Find number of pages we'll be using, insert dma addresses */
|
|
size_t pages = EHCI_NPAGES(curlen);
|
|
KASSERT(pages <= EHCI_QTD_NBUFFERS);
|
|
size_t pageoffs = EHCI_PAGE(curoffs);
|
|
for (size_t i = 0; i < pages; i++) {
|
|
paddr_t a = DMAADDR(dma,
|
|
pageoffs + i * EHCI_PAGE_SIZE);
|
|
sqtd->qtd.qtd_buffer[i] = htole32(EHCI_PAGE(a));
|
|
/* Cast up to avoid compiler warnings */
|
|
sqtd->qtd.qtd_buffer_hi[i] = htole32((uint64_t)a >> 32);
|
|
DPRINTF(" buffer[%jd/%jd] 0x%08jx 0x%08jx",
|
|
i, pages,
|
|
le32toh(sqtd->qtd.qtd_buffer_hi[i]),
|
|
le32toh(sqtd->qtd.qtd_buffer[i]));
|
|
}
|
|
/* First buffer pointer requires a page offset to start at */
|
|
sqtd->qtd.qtd_buffer[0] |= htole32(va_offs);
|
|
|
|
usb_syncmem(&sqtd->dma, sqtd->offs, sizeof(sqtd->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
sqtd->len = curlen;
|
|
|
|
DPRINTF(" va %#jx pa %#jx len %jd", (uintptr_t)va,
|
|
(uintptr_t)DMAADDR(&xfer->ux_dmabuf, curoffs), curlen, 0);
|
|
|
|
ehci_append_sqtd(sqtd, prev);
|
|
|
|
if (((curlen + mps - 1) / mps) & 1) {
|
|
tog ^= 1;
|
|
}
|
|
|
|
curoffs += curlen;
|
|
len -= curlen;
|
|
}
|
|
KASSERTMSG(len == 0, "xfer %p olen %d len %d mps %d ex_nsqtd %zu j %zu",
|
|
xfer, length, len, mps, exfer->ex_nsqtd, j);
|
|
|
|
if (!isread &&
|
|
(flags & USBD_FORCE_SHORT_XFER) &&
|
|
length % mps == 0) {
|
|
/* Force a 0 length transfer at the end. */
|
|
|
|
KASSERTMSG(j < exfer->ex_nsqtd, "j=%zu nsqtd=%zu", j,
|
|
exfer->ex_nsqtd);
|
|
prev = sqtd;
|
|
sqtd = exfer->ex_sqtds[j++];
|
|
memset(&sqtd->qtd, 0, sizeof(sqtd->qtd));
|
|
sqtd->qtd.qtd_next = sqtd->qtd.qtd_altnext = EHCI_NULL;
|
|
sqtd->qtd.qtd_status = htole32(
|
|
qtdstatus |
|
|
EHCI_QTD_SET_BYTES(0) |
|
|
EHCI_QTD_SET_TOGGLE(tog));
|
|
|
|
usb_syncmem(&sqtd->dma, sqtd->offs, sizeof(sqtd->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
ehci_append_sqtd(sqtd, prev);
|
|
tog ^= 1;
|
|
}
|
|
|
|
*lsqtd = sqtd;
|
|
*toggle = tog;
|
|
}
|
|
|
|
Static ehci_soft_itd_t *
|
|
ehci_alloc_itd(ehci_softc_t *sc)
|
|
{
|
|
struct ehci_soft_itd *itd, *freeitd;
|
|
usbd_status err;
|
|
usb_dma_t dma;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
freeitd = LIST_FIRST(&sc->sc_freeitds);
|
|
if (freeitd == NULL) {
|
|
DPRINTF("allocating chunk", 0, 0, 0, 0);
|
|
mutex_exit(&sc->sc_lock);
|
|
err = usb_allocmem(&sc->sc_bus, EHCI_ITD_SIZE * EHCI_ITD_CHUNK,
|
|
EHCI_PAGE_SIZE, &dma);
|
|
|
|
if (err) {
|
|
DPRINTF("alloc returned %jd", err, 0, 0, 0);
|
|
return NULL;
|
|
}
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
for (int i = 0; i < EHCI_ITD_CHUNK; i++) {
|
|
int offs = i * EHCI_ITD_SIZE;
|
|
itd = KERNADDR(&dma, offs);
|
|
itd->physaddr = DMAADDR(&dma, offs);
|
|
itd->dma = dma;
|
|
itd->offs = offs;
|
|
LIST_INSERT_HEAD(&sc->sc_freeitds, itd, free_list);
|
|
}
|
|
freeitd = LIST_FIRST(&sc->sc_freeitds);
|
|
}
|
|
|
|
itd = freeitd;
|
|
LIST_REMOVE(itd, free_list);
|
|
mutex_exit(&sc->sc_lock);
|
|
memset(&itd->itd, 0, sizeof(ehci_itd_t));
|
|
|
|
itd->frame_list.next = NULL;
|
|
itd->frame_list.prev = NULL;
|
|
itd->xfer_next = NULL;
|
|
itd->slot = 0;
|
|
|
|
return itd;
|
|
}
|
|
|
|
Static ehci_soft_sitd_t *
|
|
ehci_alloc_sitd(ehci_softc_t *sc)
|
|
{
|
|
struct ehci_soft_sitd *sitd, *freesitd;
|
|
usbd_status err;
|
|
int i, offs;
|
|
usb_dma_t dma;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
freesitd = LIST_FIRST(&sc->sc_freesitds);
|
|
if (freesitd == NULL) {
|
|
DPRINTF("allocating chunk", 0, 0, 0, 0);
|
|
mutex_exit(&sc->sc_lock);
|
|
err = usb_allocmem(&sc->sc_bus, EHCI_SITD_SIZE * EHCI_SITD_CHUNK,
|
|
EHCI_PAGE_SIZE, &dma);
|
|
|
|
if (err) {
|
|
DPRINTF("alloc returned %jd", err, 0, 0,
|
|
0);
|
|
return NULL;
|
|
}
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
for (i = 0; i < EHCI_SITD_CHUNK; i++) {
|
|
offs = i * EHCI_SITD_SIZE;
|
|
sitd = KERNADDR(&dma, offs);
|
|
sitd->physaddr = DMAADDR(&dma, offs);
|
|
sitd->dma = dma;
|
|
sitd->offs = offs;
|
|
LIST_INSERT_HEAD(&sc->sc_freesitds, sitd, free_list);
|
|
}
|
|
freesitd = LIST_FIRST(&sc->sc_freesitds);
|
|
}
|
|
|
|
sitd = freesitd;
|
|
LIST_REMOVE(sitd, free_list);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
memset(&sitd->sitd, 0, sizeof(ehci_sitd_t));
|
|
|
|
sitd->frame_list.next = NULL;
|
|
sitd->frame_list.prev = NULL;
|
|
sitd->xfer_next = NULL;
|
|
sitd->slot = 0;
|
|
|
|
return sitd;
|
|
}
|
|
|
|
/****************/
|
|
|
|
/*
|
|
* Close a reqular pipe.
|
|
* Assumes that there are no pending transactions.
|
|
*/
|
|
Static void
|
|
ehci_close_pipe(struct usbd_pipe *pipe, ehci_soft_qh_t *head)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
ehci_soft_qh_t *sqh = epipe->sqh;
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
ehci_rem_qh(sc, sqh, head);
|
|
ehci_free_sqh(sc, epipe->sqh);
|
|
}
|
|
|
|
/*
|
|
* Cancel or timeout a device request. We have two cases to deal with
|
|
*
|
|
* 1) A driver wants to stop scheduled or inflight transfers
|
|
* 2) A transfer has timed out
|
|
*
|
|
* have (partially) happened since the hardware runs concurrently.
|
|
*
|
|
* Transfer state is protected by the bus lock and we set the transfer status
|
|
* as soon as either of the above happens (with bus lock held).
|
|
*
|
|
* Then we arrange for the hardware to tells us that it is not still
|
|
* processing the TDs by setting the QH halted bit and wait for the ehci
|
|
* door bell
|
|
*/
|
|
Static void
|
|
ehci_abort_xfer(struct usbd_xfer *xfer, usbd_status status)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
ehci_soft_qh_t *sqh = epipe->sqh;
|
|
ehci_soft_qtd_t *sqtd, *fsqtd, *lsqtd;
|
|
ehci_physaddr_t cur;
|
|
uint32_t qhstatus;
|
|
int hit;
|
|
|
|
KASSERTMSG((status == USBD_CANCELLED || status == USBD_TIMEOUT),
|
|
"invalid status for abort: %d", (int)status);
|
|
|
|
DPRINTF("xfer=%#jx pipe=%#jx", (uintptr_t)xfer, (uintptr_t)epipe, 0, 0);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
ASSERT_SLEEPABLE();
|
|
|
|
if (status == USBD_CANCELLED) {
|
|
/*
|
|
* We are synchronously aborting. Try to stop the
|
|
* callout and task, but if we can't, wait for them to
|
|
* complete.
|
|
*/
|
|
callout_halt(&xfer->ux_callout, &sc->sc_lock);
|
|
usb_rem_task_wait(xfer->ux_pipe->up_dev, &xfer->ux_aborttask,
|
|
USB_TASKQ_HC, &sc->sc_lock);
|
|
} else {
|
|
/* Otherwise, we are timing out. */
|
|
KASSERT(status == USBD_TIMEOUT);
|
|
}
|
|
|
|
/*
|
|
* The xfer cannot have been cancelled already. It is the
|
|
* responsibility of the caller of usbd_abort_pipe not to try
|
|
* to abort a pipe multiple times, whether concurrently or
|
|
* sequentially.
|
|
*/
|
|
KASSERT(xfer->ux_status != USBD_CANCELLED);
|
|
|
|
/* Only the timeout, which runs only once, can time it out. */
|
|
KASSERT(xfer->ux_status != USBD_TIMEOUT);
|
|
|
|
/* If anyone else beat us, we're done. */
|
|
if (xfer->ux_status != USBD_IN_PROGRESS)
|
|
return;
|
|
|
|
/* We beat everyone else. Claim the status. */
|
|
xfer->ux_status = status;
|
|
|
|
/*
|
|
* If we're dying, skip the hardware action and just notify the
|
|
* software that we're done.
|
|
*/
|
|
if (sc->sc_dying) {
|
|
goto dying;
|
|
}
|
|
|
|
/*
|
|
* HC Step 1: Make interrupt routine and hardware ignore xfer.
|
|
*/
|
|
ehci_del_intr_list(sc, exfer);
|
|
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status),
|
|
sizeof(sqh->qh.qh_qtd.qtd_status),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
qhstatus = sqh->qh.qh_qtd.qtd_status;
|
|
sqh->qh.qh_qtd.qtd_status = qhstatus | htole32(EHCI_QTD_HALTED);
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status),
|
|
sizeof(sqh->qh.qh_qtd.qtd_status),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
if (exfer->ex_type == EX_CTRL) {
|
|
fsqtd = exfer->ex_setup;
|
|
lsqtd = exfer->ex_status;
|
|
} else {
|
|
fsqtd = exfer->ex_sqtdstart;
|
|
lsqtd = exfer->ex_sqtdend;
|
|
}
|
|
for (sqtd = fsqtd; ; sqtd = sqtd->nextqtd) {
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(sqtd->qtd.qtd_status),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
sqtd->qtd.qtd_status |= htole32(EHCI_QTD_HALTED);
|
|
usb_syncmem(&sqtd->dma,
|
|
sqtd->offs + offsetof(ehci_qtd_t, qtd_status),
|
|
sizeof(sqtd->qtd.qtd_status),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
if (sqtd == lsqtd)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* HC Step 2: Wait until we know hardware has finished any possible
|
|
* use of the xfer.
|
|
*/
|
|
ehci_sync_hc(sc);
|
|
|
|
/*
|
|
* HC Step 3: Remove any vestiges of the xfer from the hardware.
|
|
* The complication here is that the hardware may have executed
|
|
* beyond the xfer we're trying to abort. So as we're scanning
|
|
* the TDs of this xfer we check if the hardware points to
|
|
* any of them.
|
|
*/
|
|
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_curqtd),
|
|
sizeof(sqh->qh.qh_curqtd),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
cur = EHCI_LINK_ADDR(le32toh(sqh->qh.qh_curqtd));
|
|
hit = 0;
|
|
for (sqtd = fsqtd; ; sqtd = sqtd->nextqtd) {
|
|
hit |= cur == sqtd->physaddr;
|
|
if (sqtd == lsqtd)
|
|
break;
|
|
}
|
|
sqtd = sqtd->nextqtd;
|
|
/* Zap curqtd register if hardware pointed inside the xfer. */
|
|
if (hit && sqtd != NULL) {
|
|
DPRINTF("cur=0x%08jx", sqtd->physaddr, 0, 0, 0);
|
|
sqh->qh.qh_curqtd = htole32(sqtd->physaddr); /* unlink qTDs */
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_curqtd),
|
|
sizeof(sqh->qh.qh_curqtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
sqh->qh.qh_qtd.qtd_status = qhstatus;
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status),
|
|
sizeof(sqh->qh.qh_qtd.qtd_status),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
} else {
|
|
DPRINTF("no hit", 0, 0, 0, 0);
|
|
usb_syncmem(&sqh->dma,
|
|
sqh->offs + offsetof(ehci_qh_t, qh_curqtd),
|
|
sizeof(sqh->qh.qh_curqtd),
|
|
BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
/*
|
|
* Final step: Notify completion to waiting xfers.
|
|
*/
|
|
dying:
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = true;
|
|
#endif
|
|
usb_transfer_complete(xfer);
|
|
DPRINTFN(14, "end", 0, 0, 0, 0);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
}
|
|
|
|
Static void
|
|
ehci_abort_isoc_xfer(struct usbd_xfer *xfer, usbd_status status)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
ehci_isoc_trans_t trans_status;
|
|
struct ehci_xfer *exfer;
|
|
ehci_softc_t *sc;
|
|
struct ehci_soft_itd *itd;
|
|
struct ehci_soft_sitd *sitd;
|
|
int i;
|
|
|
|
KASSERTMSG(status == USBD_CANCELLED,
|
|
"invalid status for abort: %d", (int)status);
|
|
|
|
exfer = EHCI_XFER2EXFER(xfer);
|
|
sc = EHCI_XFER2SC(xfer);
|
|
|
|
DPRINTF("xfer %#jx pipe %#jx", (uintptr_t)xfer,
|
|
(uintptr_t)xfer->ux_pipe, 0, 0);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
ASSERT_SLEEPABLE();
|
|
|
|
/* No timeout or task here. */
|
|
|
|
/*
|
|
* The xfer cannot have been cancelled already. It is the
|
|
* responsibility of the caller of usbd_abort_pipe not to try
|
|
* to abort a pipe multiple times, whether concurrently or
|
|
* sequentially.
|
|
*/
|
|
KASSERT(xfer->ux_status != USBD_CANCELLED);
|
|
|
|
/* If anyone else beat us, we're done. */
|
|
if (xfer->ux_status != USBD_IN_PROGRESS)
|
|
return;
|
|
|
|
/* We beat everyone else. Claim the status. */
|
|
xfer->ux_status = status;
|
|
|
|
/*
|
|
* If we're dying, skip the hardware action and just notify the
|
|
* software that we're done.
|
|
*/
|
|
if (sc->sc_dying) {
|
|
goto dying;
|
|
}
|
|
|
|
/*
|
|
* HC Step 1: Make interrupt routine and hardware ignore xfer.
|
|
*/
|
|
ehci_del_intr_list(sc, exfer);
|
|
|
|
if (xfer->ux_pipe->up_dev->ud_speed == USB_SPEED_HIGH) {
|
|
for (itd = exfer->ex_itdstart; itd != NULL;
|
|
itd = itd->xfer_next) {
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_ctl),
|
|
sizeof(itd->itd.itd_ctl),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
trans_status = le32toh(itd->itd.itd_ctl[i]);
|
|
trans_status &= ~EHCI_ITD_ACTIVE;
|
|
itd->itd.itd_ctl[i] = htole32(trans_status);
|
|
}
|
|
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_ctl),
|
|
sizeof(itd->itd.itd_ctl),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
}
|
|
} else {
|
|
for (sitd = exfer->ex_sitdstart; sitd != NULL;
|
|
sitd = sitd->xfer_next) {
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_buffer),
|
|
sizeof(sitd->sitd.sitd_buffer),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
trans_status = le32toh(sitd->sitd.sitd_trans);
|
|
trans_status &= ~EHCI_SITD_ACTIVE;
|
|
sitd->sitd.sitd_trans = htole32(trans_status);
|
|
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_buffer),
|
|
sizeof(sitd->sitd.sitd_buffer),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
}
|
|
}
|
|
|
|
dying:
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = true;
|
|
#endif
|
|
usb_transfer_complete(xfer);
|
|
DPRINTFN(14, "end", 0, 0, 0, 0);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
}
|
|
|
|
Static void
|
|
ehci_timeout(void *addr)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
struct usbd_xfer *xfer = addr;
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct usbd_device *dev = xfer->ux_pipe->up_dev;
|
|
|
|
DPRINTF("xfer %#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
#ifdef EHCI_DEBUG
|
|
if (ehcidebug >= 2) {
|
|
struct usbd_pipe *pipe = xfer->ux_pipe;
|
|
usbd_dump_pipe(pipe);
|
|
}
|
|
#endif
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
if (!sc->sc_dying && xfer->ux_status == USBD_IN_PROGRESS)
|
|
usb_add_task(dev, &xfer->ux_aborttask, USB_TASKQ_HC);
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
Static void
|
|
ehci_timeout_task(void *addr)
|
|
{
|
|
struct usbd_xfer *xfer = addr;
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_abort_xfer(xfer, USBD_TIMEOUT);
|
|
mutex_exit(&sc->sc_lock);
|
|
}
|
|
|
|
/************************/
|
|
|
|
Static int
|
|
ehci_device_ctrl_init(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usb_device_request_t *req = &xfer->ux_request;
|
|
ehci_soft_qtd_t *setup, *status, *next;
|
|
int isread = req->bmRequestType & UT_READ;
|
|
int len = xfer->ux_bufsize;
|
|
int err;
|
|
|
|
exfer->ex_type = EX_CTRL;
|
|
exfer->ex_status = NULL;
|
|
exfer->ex_data = NULL;
|
|
exfer->ex_setup = ehci_alloc_sqtd(sc);
|
|
if (exfer->ex_setup == NULL) {
|
|
err = ENOMEM;
|
|
goto bad1;
|
|
}
|
|
exfer->ex_status = ehci_alloc_sqtd(sc);
|
|
if (exfer->ex_status == NULL) {
|
|
err = ENOMEM;
|
|
goto bad2;
|
|
}
|
|
setup = exfer->ex_setup;
|
|
status = exfer->ex_status;
|
|
exfer->ex_nsqtd = 0;
|
|
next = status;
|
|
/* Set up data transaction */
|
|
if (len != 0) {
|
|
err = ehci_alloc_sqtd_chain(sc, xfer, len, isread,
|
|
&exfer->ex_data);
|
|
if (err)
|
|
goto bad3;
|
|
next = exfer->ex_data;
|
|
}
|
|
|
|
/* Clear toggle */
|
|
setup->qtd.qtd_status = htole32(
|
|
EHCI_QTD_SET_PID(EHCI_QTD_PID_SETUP) |
|
|
EHCI_QTD_SET_TOGGLE(0) |
|
|
EHCI_QTD_SET_BYTES(sizeof(*req))
|
|
);
|
|
setup->qtd.qtd_buffer[0] = htole32(DMAADDR(&epipe->ctrl.reqdma, 0));
|
|
setup->qtd.qtd_buffer_hi[0] = 0;
|
|
setup->qtd.qtd_next = setup->qtd.qtd_altnext = htole32(next->physaddr);
|
|
setup->nextqtd = next;
|
|
setup->xfer = xfer;
|
|
setup->len = sizeof(*req);
|
|
|
|
status->qtd.qtd_status = htole32(
|
|
EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_OUT : EHCI_QTD_PID_IN) |
|
|
EHCI_QTD_SET_TOGGLE(1) |
|
|
EHCI_QTD_IOC
|
|
);
|
|
status->qtd.qtd_buffer[0] = 0;
|
|
status->qtd.qtd_buffer_hi[0] = 0;
|
|
status->qtd.qtd_next = status->qtd.qtd_altnext = EHCI_NULL;
|
|
status->nextqtd = NULL;
|
|
status->xfer = xfer;
|
|
status->len = 0;
|
|
|
|
return 0;
|
|
bad3:
|
|
ehci_free_sqtd(sc, exfer->ex_status);
|
|
bad2:
|
|
ehci_free_sqtd(sc, exfer->ex_setup);
|
|
bad1:
|
|
return err;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_ctrl_fini(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERT(ex->ex_type == EX_CTRL);
|
|
|
|
ehci_free_sqtd(sc, ex->ex_setup);
|
|
ehci_free_sqtd(sc, ex->ex_status);
|
|
ehci_free_sqtds(sc, ex);
|
|
if (ex->ex_nsqtd)
|
|
kmem_free(ex->ex_sqtds,
|
|
sizeof(ehci_soft_qtd_t *) * ex->ex_nsqtd);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_ctrl_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status err;
|
|
|
|
/* Insert last in queue. */
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Pipe isn't running, start first */
|
|
return ehci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_ctrl_start(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
usb_device_request_t *req = &xfer->ux_request;
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
ehci_soft_qtd_t *setup, *status, *next;
|
|
ehci_soft_qh_t *sqh;
|
|
const bool polling = sc->sc_bus.ub_usepolling;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(xfer->ux_rqflags & URQ_REQUEST);
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
const int isread = req->bmRequestType & UT_READ;
|
|
const int len = UGETW(req->wLength);
|
|
|
|
DPRINTF("type=0x%02jx, request=0x%02jx, wValue=0x%04jx, wIndex=0x%04jx",
|
|
req->bmRequestType, req->bRequest, UGETW(req->wValue),
|
|
UGETW(req->wIndex));
|
|
DPRINTF("len=%jd, addr=%jd, endpt=%jd",
|
|
len, epipe->pipe.up_dev->ud_addr,
|
|
epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress, 0);
|
|
|
|
sqh = epipe->sqh;
|
|
|
|
KASSERTMSG(EHCI_QH_GET_ADDR(le32toh(sqh->qh.qh_endp)) == epipe->pipe.up_dev->ud_addr,
|
|
"address QH %" __PRIuBIT " pipe %d\n",
|
|
EHCI_QH_GET_ADDR(le32toh(sqh->qh.qh_endp)),
|
|
epipe->pipe.up_dev->ud_addr);
|
|
KASSERTMSG(EHCI_QH_GET_MPL(le32toh(sqh->qh.qh_endp)) ==
|
|
UGETW(epipe->pipe.up_endpoint->ue_edesc->wMaxPacketSize),
|
|
"MPS QH %" __PRIuBIT " pipe %d\n",
|
|
EHCI_QH_GET_MPL(le32toh(sqh->qh.qh_endp)),
|
|
UGETW(epipe->pipe.up_endpoint->ue_edesc->wMaxPacketSize));
|
|
|
|
setup = exfer->ex_setup;
|
|
status = exfer->ex_status;
|
|
|
|
DPRINTF("setup %#jx status %#jx data %#jx",
|
|
(uintptr_t)setup, (uintptr_t)status, (uintptr_t)exfer->ex_data, 0);
|
|
KASSERTMSG(setup != NULL && status != NULL,
|
|
"Failed memory allocation, setup %p status %p",
|
|
setup, status);
|
|
|
|
memcpy(KERNADDR(&epipe->ctrl.reqdma, 0), req, sizeof(*req));
|
|
usb_syncmem(&epipe->ctrl.reqdma, 0, sizeof(*req), BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Clear toggle */
|
|
setup->qtd.qtd_status &= ~htole32(
|
|
EHCI_QTD_STATUS_MASK |
|
|
EHCI_QTD_BYTES_MASK |
|
|
EHCI_QTD_TOGGLE_MASK |
|
|
EHCI_QTD_CERR_MASK
|
|
);
|
|
setup->qtd.qtd_status |= htole32(
|
|
EHCI_QTD_ACTIVE |
|
|
EHCI_QTD_SET_CERR(3) |
|
|
EHCI_QTD_SET_TOGGLE(0) |
|
|
EHCI_QTD_SET_BYTES(sizeof(*req))
|
|
);
|
|
setup->qtd.qtd_buffer[0] = htole32(DMAADDR(&epipe->ctrl.reqdma, 0));
|
|
setup->qtd.qtd_buffer_hi[0] = 0;
|
|
|
|
next = status;
|
|
status->qtd.qtd_status &= ~htole32(
|
|
EHCI_QTD_STATUS_MASK |
|
|
EHCI_QTD_PID_MASK |
|
|
EHCI_QTD_BYTES_MASK |
|
|
EHCI_QTD_TOGGLE_MASK |
|
|
EHCI_QTD_CERR_MASK
|
|
);
|
|
status->qtd.qtd_status |= htole32(
|
|
EHCI_QTD_ACTIVE |
|
|
EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_OUT : EHCI_QTD_PID_IN) |
|
|
EHCI_QTD_SET_CERR(3) |
|
|
EHCI_QTD_SET_TOGGLE(1) |
|
|
EHCI_QTD_SET_BYTES(0) |
|
|
EHCI_QTD_IOC
|
|
);
|
|
KASSERT(status->qtd.qtd_status & htole32(EHCI_QTD_TOGGLE_MASK));
|
|
|
|
KASSERT(exfer->ex_isdone);
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = false;
|
|
#endif
|
|
|
|
/* Set up data transaction */
|
|
if (len != 0) {
|
|
ehci_soft_qtd_t *end;
|
|
|
|
/* Start toggle at 1. */
|
|
int toggle = 1;
|
|
next = exfer->ex_data;
|
|
KASSERTMSG(next != NULL, "Failed memory allocation");
|
|
ehci_reset_sqtd_chain(sc, xfer, len, isread, &toggle, &end);
|
|
end->nextqtd = status;
|
|
end->qtd.qtd_next = end->qtd.qtd_altnext =
|
|
htole32(status->physaddr);
|
|
|
|
usb_syncmem(&end->dma, end->offs, sizeof(end->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, len,
|
|
isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
setup->nextqtd = next;
|
|
setup->qtd.qtd_next = setup->qtd.qtd_altnext = htole32(next->physaddr);
|
|
|
|
usb_syncmem(&setup->dma, setup->offs, sizeof(setup->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
usb_syncmem(&status->dma, status->offs, sizeof(status->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
KASSERT(status->qtd.qtd_status & htole32(EHCI_QTD_TOGGLE_MASK));
|
|
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(setup);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
if (!polling)
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
/* Insert qTD in QH list - also does usb_syncmem(sqh) */
|
|
ehci_set_qh_qtd(sqh, setup);
|
|
if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) {
|
|
callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout),
|
|
ehci_timeout, xfer);
|
|
}
|
|
ehci_add_intr_list(sc, exfer);
|
|
xfer->ux_status = USBD_IN_PROGRESS;
|
|
if (!polling)
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
#if 0
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(10, "status=%jx, dump:", EOREAD4(sc, EHCI_USBSTS), 0, 0, 0);
|
|
// delay(10000);
|
|
ehci_dump_regs(sc);
|
|
ehci_dump_sqh(sc->sc_async_head);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(setup);
|
|
#endif
|
|
#endif
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_ctrl_done(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc __diagused = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
usb_device_request_t *req = &xfer->ux_request;
|
|
int len = UGETW(req->wLength);
|
|
int rd = req->bmRequestType & UT_READ;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
DPRINTF("xfer=%#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
KASSERT(xfer->ux_rqflags & URQ_REQUEST);
|
|
|
|
usb_syncmem(&epipe->ctrl.reqdma, 0, sizeof(*req),
|
|
BUS_DMASYNC_POSTWRITE);
|
|
if (len)
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, len,
|
|
rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
|
|
DPRINTF("length=%jd", xfer->ux_actlen, 0, 0, 0);
|
|
}
|
|
|
|
/* Abort a device control request. */
|
|
Static void
|
|
ehci_device_ctrl_abort(struct usbd_xfer *xfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
ehci_abort_xfer(xfer, USBD_CANCELLED);
|
|
}
|
|
|
|
/* Close a device control pipe. */
|
|
Static void
|
|
ehci_device_ctrl_close(struct usbd_pipe *pipe)
|
|
{
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
/*struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);*/
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
DPRINTF("pipe=%#jx", (uintptr_t)pipe, 0, 0, 0);
|
|
|
|
ehci_close_pipe(pipe, sc->sc_async_head);
|
|
}
|
|
|
|
/*
|
|
* Some EHCI chips from VIA seem to trigger interrupts before writing back the
|
|
* qTD status, or miss signalling occasionally under heavy load. If the host
|
|
* machine is too fast, we we can miss transaction completion - when we scan
|
|
* the active list the transaction still seems to be active. This generally
|
|
* exhibits itself as a umass stall that never recovers.
|
|
*
|
|
* We work around this behaviour by setting up this callback after any softintr
|
|
* that completes with transactions still pending, giving us another chance to
|
|
* check for completion after the writeback has taken place.
|
|
*/
|
|
Static void
|
|
ehci_intrlist_timeout(void *arg)
|
|
{
|
|
ehci_softc_t *sc = arg;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
usb_schedsoftintr(&sc->sc_bus);
|
|
}
|
|
|
|
/************************/
|
|
|
|
Static int
|
|
ehci_device_bulk_init(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
usb_endpoint_descriptor_t *ed = xfer->ux_pipe->up_endpoint->ue_edesc;
|
|
int endpt = ed->bEndpointAddress;
|
|
int isread = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
int len = xfer->ux_bufsize;
|
|
int err = 0;
|
|
|
|
exfer->ex_type = EX_BULK;
|
|
exfer->ex_nsqtd = 0;
|
|
err = ehci_alloc_sqtd_chain(sc, xfer, len, isread,
|
|
&exfer->ex_sqtdstart);
|
|
|
|
return err;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_bulk_fini(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERT(ex->ex_type == EX_BULK);
|
|
|
|
ehci_free_sqtds(sc, ex);
|
|
if (ex->ex_nsqtd)
|
|
kmem_free(ex->ex_sqtds, sizeof(ehci_soft_qtd_t *) * ex->ex_nsqtd);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_bulk_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status err;
|
|
|
|
/* Insert last in queue. */
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Pipe isn't running, start first */
|
|
return ehci_device_bulk_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_bulk_start(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
ehci_soft_qh_t *sqh;
|
|
ehci_soft_qtd_t *end;
|
|
int len, isread, endpt;
|
|
const bool polling = sc->sc_bus.ub_usepolling;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx len=%jd flags=%jd", (uintptr_t)xfer, xfer->ux_length,
|
|
xfer->ux_flags, 0);
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(xfer->ux_length <= xfer->ux_bufsize);
|
|
|
|
len = xfer->ux_length;
|
|
endpt = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
isread = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
sqh = epipe->sqh;
|
|
|
|
KASSERT(exfer->ex_isdone);
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = false;
|
|
#endif
|
|
|
|
/* Take lock here to protect nexttoggle */
|
|
if (!polling)
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
ehci_reset_sqtd_chain(sc, xfer, len, isread, &epipe->nexttoggle, &end);
|
|
|
|
exfer->ex_sqtdend = end;
|
|
end->qtd.qtd_status |= htole32(EHCI_QTD_IOC);
|
|
usb_syncmem(&end->dma, end->offs, sizeof(end->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(exfer->ex_sqtdstart);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
/* also does usb_syncmem(sqh) */
|
|
ehci_set_qh_qtd(sqh, exfer->ex_sqtdstart);
|
|
if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) {
|
|
callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout),
|
|
ehci_timeout, xfer);
|
|
}
|
|
ehci_add_intr_list(sc, exfer);
|
|
xfer->ux_status = USBD_IN_PROGRESS;
|
|
if (!polling)
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
#if 0
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "data(2)", 0, 0, 0, 0);
|
|
// delay(10000);
|
|
DPRINTFN(5, "data(3)", 0, 0, 0, 0);
|
|
ehci_dump_regs(sc);
|
|
#if 0
|
|
printf("async_head:\n");
|
|
ehci_dump_sqh(sc->sc_async_head);
|
|
#endif
|
|
DPRINTF("sqh:", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(exfer->ex_sqtdstart);
|
|
#endif
|
|
#endif
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_bulk_abort(struct usbd_xfer *xfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer %#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
ehci_abort_xfer(xfer, USBD_CANCELLED);
|
|
}
|
|
|
|
/*
|
|
* Close a device bulk pipe.
|
|
*/
|
|
Static void
|
|
ehci_device_bulk_close(struct usbd_pipe *pipe)
|
|
{
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
DPRINTF("pipe=%#jx", (uintptr_t)pipe, 0, 0, 0);
|
|
pipe->up_endpoint->ue_toggle = epipe->nexttoggle;
|
|
ehci_close_pipe(pipe, sc->sc_async_head);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_bulk_done(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc __diagused = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
int endpt = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
int rd = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx, actlen=%jd", (uintptr_t)xfer, xfer->ux_actlen, 0, 0);
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
|
|
DPRINTF("length=%jd", xfer->ux_actlen, 0, 0, 0);
|
|
}
|
|
|
|
/************************/
|
|
|
|
Static usbd_status
|
|
ehci_device_setintr(ehci_softc_t *sc, ehci_soft_qh_t *sqh, int ival)
|
|
{
|
|
struct ehci_soft_islot *isp;
|
|
int islot, lev;
|
|
|
|
/* Find a poll rate that is large enough. */
|
|
for (lev = EHCI_IPOLLRATES - 1; lev > 0; lev--)
|
|
if (EHCI_ILEV_IVAL(lev) <= ival)
|
|
break;
|
|
|
|
/* Pick an interrupt slot at the right level. */
|
|
/* XXX could do better than picking at random */
|
|
sc->sc_rand = (sc->sc_rand + 191) % sc->sc_flsize;
|
|
islot = EHCI_IQHIDX(lev, sc->sc_rand);
|
|
|
|
sqh->islot = islot;
|
|
isp = &sc->sc_islots[islot];
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_add_qh(sc, sqh, isp->sqh);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
|
|
Static int
|
|
ehci_device_intr_init(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usb_endpoint_descriptor_t *ed = xfer->ux_pipe->up_endpoint->ue_edesc;
|
|
int endpt = ed->bEndpointAddress;
|
|
int isread = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
int len = xfer->ux_bufsize;
|
|
int err;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx len=%jd flags=%jd", (uintptr_t)xfer, xfer->ux_length,
|
|
xfer->ux_flags, 0);
|
|
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(len != 0);
|
|
|
|
exfer->ex_type = EX_INTR;
|
|
exfer->ex_nsqtd = 0;
|
|
err = ehci_alloc_sqtd_chain(sc, xfer, len, isread,
|
|
&exfer->ex_sqtdstart);
|
|
|
|
return err;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_intr_fini(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERT(ex->ex_type == EX_INTR);
|
|
|
|
ehci_free_sqtds(sc, ex);
|
|
if (ex->ex_nsqtd)
|
|
kmem_free(ex->ex_sqtds, sizeof(ehci_soft_qtd_t *) * ex->ex_nsqtd);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_intr_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status err;
|
|
|
|
/* Insert last in queue. */
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Pipe isn't running (otherwise err would be USBD_INPROG),
|
|
* so start it first.
|
|
*/
|
|
return ehci_device_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_intr_start(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
ehci_soft_qtd_t *end;
|
|
ehci_soft_qh_t *sqh;
|
|
int len, isread, endpt;
|
|
const bool polling = sc->sc_bus.ub_usepolling;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx len=%jd flags=%jd", (uintptr_t)xfer, xfer->ux_length,
|
|
xfer->ux_flags, 0);
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(xfer->ux_length <= xfer->ux_bufsize);
|
|
|
|
len = xfer->ux_length;
|
|
endpt = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
isread = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
sqh = epipe->sqh;
|
|
|
|
KASSERT(exfer->ex_isdone);
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = false;
|
|
#endif
|
|
|
|
/* Take lock to protect nexttoggle */
|
|
if (!polling)
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
ehci_reset_sqtd_chain(sc, xfer, len, isread, &epipe->nexttoggle, &end);
|
|
|
|
end->qtd.qtd_status |= htole32(EHCI_QTD_IOC);
|
|
usb_syncmem(&end->dma, end->offs, sizeof(end->qtd),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
exfer->ex_sqtdend = end;
|
|
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "--- dump start ---", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(exfer->ex_sqtdstart);
|
|
DPRINTFN(5, "--- dump end ---", 0, 0, 0, 0);
|
|
#endif
|
|
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
/* also does usb_syncmem(sqh) */
|
|
ehci_set_qh_qtd(sqh, exfer->ex_sqtdstart);
|
|
if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) {
|
|
callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout),
|
|
ehci_timeout, xfer);
|
|
}
|
|
ehci_add_intr_list(sc, exfer);
|
|
xfer->ux_status = USBD_IN_PROGRESS;
|
|
if (!polling)
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
#if 0
|
|
#ifdef EHCI_DEBUG
|
|
DPRINTFN(5, "data(2)", 0, 0, 0, 0);
|
|
// delay(10000);
|
|
DPRINTFN(5, "data(3)", 0, 0, 0, 0);
|
|
ehci_dump_regs(sc);
|
|
DPRINTFN(5, "sqh:", 0, 0, 0, 0);
|
|
ehci_dump_sqh(sqh);
|
|
ehci_dump_sqtds(exfer->ex_sqtdstart);
|
|
#endif
|
|
#endif
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_intr_abort(struct usbd_xfer *xfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
KASSERT(xfer->ux_pipe->up_intrxfer == xfer);
|
|
|
|
/*
|
|
* XXX - abort_xfer uses ehci_sync_hc, which syncs via the advance
|
|
* async doorbell. That's dependent on the async list, wheras
|
|
* intr xfers are periodic, should not use this?
|
|
*/
|
|
ehci_abort_xfer(xfer, USBD_CANCELLED);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_intr_close(struct usbd_pipe *pipe)
|
|
{
|
|
ehci_softc_t *sc = EHCI_PIPE2SC(pipe);
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(pipe);
|
|
struct ehci_soft_islot *isp;
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
isp = &sc->sc_islots[epipe->sqh->islot];
|
|
ehci_close_pipe(pipe, isp->sqh);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_intr_done(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc __diagused = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
int isread, endpt;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer=%#jx, actlen=%jd", (uintptr_t)xfer, xfer->ux_actlen, 0, 0);
|
|
|
|
KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
|
|
|
|
endpt = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
isread = UE_GET_DIR(endpt) == UE_DIR_IN;
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
}
|
|
|
|
/************************/
|
|
Static int
|
|
ehci_device_fs_isoc_init(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_pipe *epipe = EHCI_PIPE2EPIPE(xfer->ux_pipe);
|
|
struct usbd_device *dev = xfer->ux_pipe->up_dev;
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_soft_sitd_t *sitd, *prev, *start, *stop;
|
|
int i, k, frames;
|
|
u_int huba, dir;
|
|
int err;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
start = NULL;
|
|
sitd = NULL;
|
|
|
|
DPRINTF("xfer %#jx len %jd flags %jd", (uintptr_t)xfer, xfer->ux_length,
|
|
xfer->ux_flags, 0);
|
|
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(xfer->ux_nframes != 0);
|
|
KASSERT(exfer->ex_isdone);
|
|
|
|
exfer->ex_type = EX_FS_ISOC;
|
|
/*
|
|
* Step 1: Allocate and initialize sitds.
|
|
*/
|
|
i = epipe->pipe.up_endpoint->ue_edesc->bInterval;
|
|
if (i > 16 || i == 0) {
|
|
/* Spec page 271 says intervals > 16 are invalid */
|
|
DPRINTF("bInterval %jd invalid", i, 0, 0, 0);
|
|
|
|
return EINVAL;
|
|
}
|
|
|
|
frames = xfer->ux_nframes;
|
|
for (i = 0, prev = NULL; i < frames; i++, prev = sitd) {
|
|
sitd = ehci_alloc_sitd(sc);
|
|
if (sitd == NULL) {
|
|
err = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
if (prev)
|
|
prev->xfer_next = sitd;
|
|
else
|
|
start = sitd;
|
|
|
|
huba = dev->ud_myhsport->up_parent->ud_addr;
|
|
|
|
#if 0
|
|
if (sc->sc_flags & EHCIF_FREESCALE) {
|
|
// Set hub address to 0 if embedded TT is used.
|
|
if (huba == sc->sc_addr)
|
|
huba = 0;
|
|
}
|
|
#endif
|
|
|
|
k = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
dir = UE_GET_DIR(k) ? 1 : 0;
|
|
sitd->sitd.sitd_endp =
|
|
htole32(EHCI_SITD_SET_ENDPT(UE_GET_ADDR(k)) |
|
|
EHCI_SITD_SET_DADDR(dev->ud_addr) |
|
|
EHCI_SITD_SET_PORT(dev->ud_myhsport->up_portno) |
|
|
EHCI_SITD_SET_HUBA(huba) |
|
|
EHCI_SITD_SET_DIR(dir));
|
|
|
|
sitd->sitd.sitd_back = htole32(EHCI_LINK_TERMINATE);
|
|
} /* End of frame */
|
|
|
|
sitd->sitd.sitd_trans |= htole32(EHCI_SITD_IOC);
|
|
|
|
stop = sitd;
|
|
stop->xfer_next = NULL;
|
|
exfer->ex_sitdstart = start;
|
|
exfer->ex_sitdend = stop;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_soft_sitd_t *next;
|
|
for (sitd = start; sitd; sitd = next) {
|
|
next = sitd->xfer_next;
|
|
ehci_free_sitd_locked(sc, sitd);
|
|
}
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_fs_isoc_fini(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERT(ex->ex_type == EX_FS_ISOC);
|
|
|
|
ehci_free_sitd_chain(sc, ex->ex_sitdstart);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_fs_isoc_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status __diagused err;
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
KASSERT(err == USBD_NORMAL_COMPLETION);
|
|
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct usbd_device *dev = xfer->ux_pipe->up_dev;
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_soft_sitd_t *sitd;
|
|
usb_dma_t *dma_buf;
|
|
int i, j, k, frames;
|
|
int offs, total_length;
|
|
int frindex;
|
|
u_int dir;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
sitd = NULL;
|
|
total_length = 0;
|
|
|
|
|
|
DPRINTF("xfer %#jx len %jd flags %jd", (uintptr_t)xfer, xfer->ux_length,
|
|
xfer->ux_flags, 0);
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
/*
|
|
* To avoid complication, don't allow a request right now that'll span
|
|
* the entire frame table. To within 4 frames, to allow some leeway
|
|
* on either side of where the hc currently is.
|
|
*/
|
|
if (epipe->pipe.up_endpoint->ue_edesc->bInterval *
|
|
xfer->ux_nframes >= sc->sc_flsize - 4) {
|
|
printf("ehci: isoc descriptor requested that spans the entire"
|
|
"frametable, too many frames\n");
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
KASSERT(xfer->ux_nframes != 0 && xfer->ux_frlengths);
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(exfer->ex_isdone);
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = false;
|
|
#endif
|
|
|
|
/*
|
|
* Step 1: Initialize sitds.
|
|
*/
|
|
|
|
frames = xfer->ux_nframes;
|
|
dma_buf = &xfer->ux_dmabuf;
|
|
offs = 0;
|
|
|
|
for (sitd = exfer->ex_sitdstart, i = 0; i < frames;
|
|
i++, sitd = sitd->xfer_next) {
|
|
KASSERT(sitd != NULL);
|
|
KASSERT(xfer->ux_frlengths[i] <= 0x3ff);
|
|
|
|
sitd->sitd.sitd_trans = htole32(EHCI_SITD_ACTIVE |
|
|
EHCI_SITD_SET_LEN(xfer->ux_frlengths[i]));
|
|
|
|
/* Set page0 index and offset - TP and T-offset are set below */
|
|
sitd->sitd.sitd_buffer[0] = htole32(DMAADDR(dma_buf, offs));
|
|
|
|
total_length += xfer->ux_frlengths[i];
|
|
offs += xfer->ux_frlengths[i];
|
|
|
|
sitd->sitd.sitd_buffer[1] =
|
|
htole32(EHCI_SITD_SET_BPTR(DMAADDR(dma_buf, offs - 1)));
|
|
|
|
u_int huba __diagused = dev->ud_myhsport->up_parent->ud_addr;
|
|
|
|
#if 0
|
|
if (sc->sc_flags & EHCIF_FREESCALE) {
|
|
// Set hub address to 0 if embedded TT is used.
|
|
if (huba == sc->sc_addr)
|
|
huba = 0;
|
|
}
|
|
#endif
|
|
|
|
k = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
dir = UE_GET_DIR(k) ? 1 : 0;
|
|
KASSERT(sitd->sitd.sitd_endp == htole32(
|
|
EHCI_SITD_SET_ENDPT(UE_GET_ADDR(k)) |
|
|
EHCI_SITD_SET_DADDR(dev->ud_addr) |
|
|
EHCI_SITD_SET_PORT(dev->ud_myhsport->up_portno) |
|
|
EHCI_SITD_SET_HUBA(huba) |
|
|
EHCI_SITD_SET_DIR(dir)));
|
|
KASSERT(sitd->sitd.sitd_back == htole32(EHCI_LINK_TERMINATE));
|
|
|
|
uint8_t sa = 0;
|
|
uint8_t sb = 0;
|
|
u_int temp, tlen;
|
|
|
|
if (dir == 0) { /* OUT */
|
|
temp = 0;
|
|
tlen = xfer->ux_frlengths[i];
|
|
if (tlen <= 188) {
|
|
temp |= 1; /* T-count = 1, TP = ALL */
|
|
tlen = 1;
|
|
} else {
|
|
tlen += 187;
|
|
tlen /= 188;
|
|
temp |= tlen; /* T-count = [1..6] */
|
|
temp |= 8; /* TP = Begin */
|
|
}
|
|
sitd->sitd.sitd_buffer[1] |= htole32(temp);
|
|
|
|
tlen += sa;
|
|
|
|
if (tlen >= 8) {
|
|
sb = 0;
|
|
} else {
|
|
sb = (1 << tlen);
|
|
}
|
|
|
|
sa = (1 << sa);
|
|
sa = (sb - sa) & 0x3F;
|
|
sb = 0;
|
|
} else {
|
|
sb = (-(4 << sa)) & 0xFE;
|
|
sa = (1 << sa) & 0x3F;
|
|
sa = 0x01;
|
|
sb = 0xfc;
|
|
}
|
|
|
|
sitd->sitd.sitd_sched = htole32(
|
|
EHCI_SITD_SET_SMASK(sa) |
|
|
EHCI_SITD_SET_CMASK(sb)
|
|
);
|
|
|
|
usb_syncmem(&sitd->dma, sitd->offs, sizeof(ehci_sitd_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
} /* End of frame */
|
|
|
|
sitd = exfer->ex_sitdend;
|
|
sitd->sitd.sitd_trans |= htole32(EHCI_SITD_IOC);
|
|
|
|
usb_syncmem(&sitd->dma, sitd->offs + offsetof(ehci_sitd_t, sitd_trans),
|
|
sizeof(sitd->sitd.sitd_trans),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
usb_syncmem(&exfer->ex_xfer.ux_dmabuf, 0, total_length,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Part 2: Transfer descriptors have now been set up, now they must
|
|
* be scheduled into the periodic frame list. Erk. Not wanting to
|
|
* complicate matters, transfer is denied if the transfer spans
|
|
* more than the period frame list.
|
|
*/
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
/* Start inserting frames */
|
|
if (epipe->isoc.cur_xfers > 0) {
|
|
frindex = epipe->isoc.next_frame;
|
|
} else {
|
|
frindex = EOREAD4(sc, EHCI_FRINDEX);
|
|
frindex = frindex >> 3; /* Erase microframe index */
|
|
frindex += 2;
|
|
}
|
|
|
|
if (frindex >= sc->sc_flsize)
|
|
frindex &= (sc->sc_flsize - 1);
|
|
|
|
/* Whats the frame interval? */
|
|
i = epipe->pipe.up_endpoint->ue_edesc->bInterval;
|
|
|
|
for (sitd = exfer->ex_sitdstart, j = 0; j < frames;
|
|
j++, sitd = sitd->xfer_next) {
|
|
KASSERT(sitd);
|
|
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * frindex,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
sitd->sitd.sitd_next = sc->sc_flist[frindex];
|
|
if (sitd->sitd.sitd_next == 0)
|
|
/*
|
|
* FIXME: frindex table gets initialized to NULL
|
|
* or EHCI_NULL?
|
|
*/
|
|
sitd->sitd.sitd_next = EHCI_NULL;
|
|
|
|
usb_syncmem(&sitd->dma,
|
|
sitd->offs + offsetof(ehci_sitd_t, sitd_next),
|
|
sizeof(ehci_sitd_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
sc->sc_flist[frindex] =
|
|
htole32(EHCI_LINK_SITD | sitd->physaddr);
|
|
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * frindex,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
sitd->frame_list.next = sc->sc_softsitds[frindex];
|
|
sc->sc_softsitds[frindex] = sitd;
|
|
if (sitd->frame_list.next != NULL)
|
|
sitd->frame_list.next->frame_list.prev = sitd;
|
|
sitd->slot = frindex;
|
|
sitd->frame_list.prev = NULL;
|
|
|
|
frindex += i;
|
|
if (frindex >= sc->sc_flsize)
|
|
frindex -= sc->sc_flsize;
|
|
}
|
|
|
|
epipe->isoc.cur_xfers++;
|
|
epipe->isoc.next_frame = frindex;
|
|
|
|
ehci_add_intr_list(sc, exfer);
|
|
xfer->ux_status = USBD_IN_PROGRESS;
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_fs_isoc_abort(struct usbd_xfer *xfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer = %#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
ehci_abort_isoc_xfer(xfer, USBD_CANCELLED);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_fs_isoc_close(struct usbd_pipe *pipe)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("nothing in the pipe to free?", 0, 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_fs_isoc_done(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
epipe->isoc.cur_xfers--;
|
|
ehci_remove_sitd_chain(sc, exfer->ex_itdstart);
|
|
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
}
|
|
|
|
|
|
/************************/
|
|
|
|
|
|
Static int
|
|
ehci_device_isoc_init(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_soft_itd_t *itd, *prev, *start, *stop;
|
|
int i, j, k;
|
|
int frames, ufrperframe;
|
|
int err;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
start = NULL;
|
|
prev = NULL;
|
|
itd = NULL;
|
|
|
|
KASSERT(xfer->ux_nframes != 0);
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(exfer->ex_isdone);
|
|
|
|
exfer->ex_type = EX_ISOC;
|
|
|
|
/*
|
|
* Step 1: Allocate and initialize itds, how many do we need?
|
|
* One per transfer if interval >= 8 microframes, less if we use
|
|
* multiple microframes per frame.
|
|
*/
|
|
i = epipe->pipe.up_endpoint->ue_edesc->bInterval;
|
|
if (i > 16 || i == 0) {
|
|
/* Spec page 271 says intervals > 16 are invalid */
|
|
DPRINTF("bInterval %jd invalid", i, 0, 0, 0);
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
ufrperframe = uimax(1, USB_UFRAMES_PER_FRAME / (1 << (i - 1)));
|
|
frames = (xfer->ux_nframes + (ufrperframe - 1)) / ufrperframe;
|
|
|
|
for (i = 0, prev = NULL; i < frames; i++, prev = itd) {
|
|
itd = ehci_alloc_itd(sc);
|
|
if (itd == NULL) {
|
|
err = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
if (prev != NULL) {
|
|
/* Maybe not as it's updated by the scheduling? */
|
|
prev->itd.itd_next =
|
|
htole32(itd->physaddr | EHCI_LINK_ITD);
|
|
|
|
prev->xfer_next = itd;
|
|
} else {
|
|
start = itd;
|
|
}
|
|
|
|
/*
|
|
* Other special values
|
|
*/
|
|
k = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
itd->itd.itd_bufr[0] = htole32(
|
|
EHCI_ITD_SET_EP(UE_GET_ADDR(k)) |
|
|
EHCI_ITD_SET_DADDR(epipe->pipe.up_dev->ud_addr));
|
|
|
|
k = (UE_GET_DIR(epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress))
|
|
? 1 : 0;
|
|
j = UGETW(epipe->pipe.up_endpoint->ue_edesc->wMaxPacketSize);
|
|
itd->itd.itd_bufr[1] |= htole32(
|
|
EHCI_ITD_SET_DIR(k) |
|
|
EHCI_ITD_SET_MAXPKT(UE_GET_SIZE(j)));
|
|
|
|
/* FIXME: handle invalid trans - should be done in openpipe */
|
|
itd->itd.itd_bufr[2] |=
|
|
htole32(EHCI_ITD_SET_MULTI(UE_GET_TRANS(j)+1));
|
|
} /* End of frame */
|
|
|
|
stop = itd;
|
|
stop->xfer_next = NULL;
|
|
|
|
exfer->ex_itdstart = start;
|
|
exfer->ex_itdend = stop;
|
|
|
|
return 0;
|
|
fail:
|
|
mutex_enter(&sc->sc_lock);
|
|
ehci_soft_itd_t *next;
|
|
for (itd = start; itd; itd = next) {
|
|
next = itd->xfer_next;
|
|
ehci_free_itd_locked(sc, itd);
|
|
}
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
Static void
|
|
ehci_device_isoc_fini(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_xfer *ex = EHCI_XFER2EXFER(xfer);
|
|
|
|
KASSERT(ex->ex_type == EX_ISOC);
|
|
|
|
ehci_free_itd_chain(sc, ex->ex_itdstart);
|
|
}
|
|
|
|
Static usbd_status
|
|
ehci_device_isoc_transfer(struct usbd_xfer *xfer)
|
|
{
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
usbd_status __diagused err;
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
err = usb_insert_transfer(xfer);
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
KASSERT(err == USBD_NORMAL_COMPLETION);
|
|
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_soft_itd_t *itd, *prev;
|
|
usb_dma_t *dma_buf;
|
|
int i, j;
|
|
int frames, uframes, ufrperframe;
|
|
int trans_count, offs, total_length;
|
|
int frindex;
|
|
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
prev = NULL;
|
|
itd = NULL;
|
|
trans_count = 0;
|
|
total_length = 0;
|
|
|
|
DPRINTF("xfer %#jx flags %jd", (uintptr_t)xfer, xfer->ux_flags, 0, 0);
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
/*
|
|
* To avoid complication, don't allow a request right now that'll span
|
|
* the entire frame table. To within 4 frames, to allow some leeway
|
|
* on either side of where the hc currently is.
|
|
*/
|
|
if ((1 << (epipe->pipe.up_endpoint->ue_edesc->bInterval)) *
|
|
xfer->ux_nframes >= (sc->sc_flsize - 4) * 8) {
|
|
DPRINTF(
|
|
"isoc descriptor spans entire frametable", 0, 0, 0, 0);
|
|
printf("ehci: isoc descriptor requested that spans the entire frametable, too many frames\n");
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
KASSERT(xfer->ux_nframes != 0 && xfer->ux_frlengths);
|
|
KASSERT(!(xfer->ux_rqflags & URQ_REQUEST));
|
|
KASSERT(exfer->ex_isdone);
|
|
#ifdef DIAGNOSTIC
|
|
exfer->ex_isdone = false;
|
|
#endif
|
|
|
|
/*
|
|
* Step 1: Re-Initialize itds
|
|
*/
|
|
|
|
i = epipe->pipe.up_endpoint->ue_edesc->bInterval;
|
|
if (i > 16 || i == 0) {
|
|
/* Spec page 271 says intervals > 16 are invalid */
|
|
DPRINTF("bInterval %jd invalid", i, 0, 0, 0);
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
ufrperframe = uimax(1, USB_UFRAMES_PER_FRAME / (1 << (i - 1)));
|
|
frames = (xfer->ux_nframes + (ufrperframe - 1)) / ufrperframe;
|
|
uframes = USB_UFRAMES_PER_FRAME / ufrperframe;
|
|
|
|
if (frames == 0) {
|
|
DPRINTF("frames == 0", 0, 0, 0, 0);
|
|
return USBD_INVAL;
|
|
}
|
|
|
|
dma_buf = &xfer->ux_dmabuf;
|
|
offs = 0;
|
|
|
|
itd = exfer->ex_itdstart;
|
|
for (i = 0; i < frames; i++, itd = itd->xfer_next) {
|
|
int froffs = offs;
|
|
|
|
if (prev != NULL) {
|
|
prev->itd.itd_next =
|
|
htole32(itd->physaddr | EHCI_LINK_ITD);
|
|
usb_syncmem(&prev->dma,
|
|
prev->offs + offsetof(ehci_itd_t, itd_next),
|
|
sizeof(prev->itd.itd_next), BUS_DMASYNC_POSTWRITE);
|
|
prev->xfer_next = itd;
|
|
}
|
|
|
|
/*
|
|
* Step 1.5, initialize uframes
|
|
*/
|
|
for (j = 0; j < EHCI_ITD_NUFRAMES; j += uframes) {
|
|
/* Calculate which page in the list this starts in */
|
|
int addr = DMAADDR(dma_buf, froffs);
|
|
addr = EHCI_PAGE_OFFSET(addr);
|
|
addr += (offs - froffs);
|
|
addr = EHCI_PAGE(addr);
|
|
addr /= EHCI_PAGE_SIZE;
|
|
|
|
/*
|
|
* This gets the initial offset into the first page,
|
|
* looks how far further along the current uframe
|
|
* offset is. Works out how many pages that is.
|
|
*/
|
|
|
|
itd->itd.itd_ctl[j] = htole32 ( EHCI_ITD_ACTIVE |
|
|
EHCI_ITD_SET_LEN(xfer->ux_frlengths[trans_count]) |
|
|
EHCI_ITD_SET_PG(addr) |
|
|
EHCI_ITD_SET_OFFS(EHCI_PAGE_OFFSET(DMAADDR(dma_buf,offs))));
|
|
|
|
total_length += xfer->ux_frlengths[trans_count];
|
|
offs += xfer->ux_frlengths[trans_count];
|
|
trans_count++;
|
|
|
|
if (trans_count >= xfer->ux_nframes) { /*Set IOC*/
|
|
itd->itd.itd_ctl[j] |= htole32(EHCI_ITD_IOC);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Step 1.75, set buffer pointers. To simplify matters, all
|
|
* pointers are filled out for the next 7 hardware pages in
|
|
* the dma block, so no need to worry what pages to cover
|
|
* and what to not.
|
|
*/
|
|
|
|
for (j = 0; j < EHCI_ITD_NBUFFERS; j++) {
|
|
/*
|
|
* Don't try to lookup a page that's past the end
|
|
* of buffer
|
|
*/
|
|
int page_offs = EHCI_PAGE(froffs + (EHCI_PAGE_SIZE * j));
|
|
if (page_offs >= dma_buf->udma_block->size)
|
|
break;
|
|
|
|
uint64_t page = DMAADDR(dma_buf, page_offs);
|
|
page = EHCI_PAGE(page);
|
|
itd->itd.itd_bufr[j] = htole32(EHCI_ITD_SET_BPTR(page));
|
|
itd->itd.itd_bufr_hi[j] = htole32(page >> 32);
|
|
}
|
|
/*
|
|
* Other special values
|
|
*/
|
|
|
|
int k = epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress;
|
|
itd->itd.itd_bufr[0] |= htole32(EHCI_ITD_SET_EP(UE_GET_ADDR(k)) |
|
|
EHCI_ITD_SET_DADDR(epipe->pipe.up_dev->ud_addr));
|
|
|
|
k = (UE_GET_DIR(epipe->pipe.up_endpoint->ue_edesc->bEndpointAddress))
|
|
? 1 : 0;
|
|
j = UGETW(epipe->pipe.up_endpoint->ue_edesc->wMaxPacketSize);
|
|
itd->itd.itd_bufr[1] |= htole32(EHCI_ITD_SET_DIR(k) |
|
|
EHCI_ITD_SET_MAXPKT(UE_GET_SIZE(j)));
|
|
|
|
/* FIXME: handle invalid trans */
|
|
itd->itd.itd_bufr[2] |=
|
|
htole32(EHCI_ITD_SET_MULTI(UE_GET_TRANS(j)+1));
|
|
|
|
usb_syncmem(&itd->dma, itd->offs, sizeof(ehci_itd_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
prev = itd;
|
|
} /* End of frame */
|
|
|
|
usb_syncmem(&exfer->ex_xfer.ux_dmabuf, 0, total_length,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Part 2: Transfer descriptors have now been set up, now they must
|
|
* be scheduled into the period frame list. Erk. Not wanting to
|
|
* complicate matters, transfer is denied if the transfer spans
|
|
* more than the period frame list.
|
|
*/
|
|
|
|
mutex_enter(&sc->sc_lock);
|
|
|
|
/* Start inserting frames */
|
|
if (epipe->isoc.cur_xfers > 0) {
|
|
frindex = epipe->isoc.next_frame;
|
|
} else {
|
|
frindex = EOREAD4(sc, EHCI_FRINDEX);
|
|
frindex = frindex >> 3; /* Erase microframe index */
|
|
frindex += 2;
|
|
}
|
|
|
|
if (frindex >= sc->sc_flsize)
|
|
frindex &= (sc->sc_flsize - 1);
|
|
|
|
/* What's the frame interval? */
|
|
i = (1 << (epipe->pipe.up_endpoint->ue_edesc->bInterval - 1));
|
|
if (i / USB_UFRAMES_PER_FRAME == 0)
|
|
i = 1;
|
|
else
|
|
i /= USB_UFRAMES_PER_FRAME;
|
|
|
|
itd = exfer->ex_itdstart;
|
|
for (j = 0; j < frames; j++) {
|
|
KASSERTMSG(itd != NULL, "frame %d\n", j);
|
|
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * frindex,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
|
|
itd->itd.itd_next = sc->sc_flist[frindex];
|
|
if (itd->itd.itd_next == 0)
|
|
/*
|
|
* FIXME: frindex table gets initialized to NULL
|
|
* or EHCI_NULL?
|
|
*/
|
|
itd->itd.itd_next = EHCI_NULL;
|
|
|
|
usb_syncmem(&itd->dma,
|
|
itd->offs + offsetof(ehci_itd_t, itd_next),
|
|
sizeof(itd->itd.itd_next),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
sc->sc_flist[frindex] = htole32(EHCI_LINK_ITD | itd->physaddr);
|
|
|
|
usb_syncmem(&sc->sc_fldma,
|
|
sizeof(ehci_link_t) * frindex,
|
|
sizeof(ehci_link_t),
|
|
BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
|
|
|
|
itd->frame_list.next = sc->sc_softitds[frindex];
|
|
sc->sc_softitds[frindex] = itd;
|
|
if (itd->frame_list.next != NULL)
|
|
itd->frame_list.next->frame_list.prev = itd;
|
|
itd->slot = frindex;
|
|
itd->frame_list.prev = NULL;
|
|
|
|
frindex += i;
|
|
if (frindex >= sc->sc_flsize)
|
|
frindex -= sc->sc_flsize;
|
|
|
|
itd = itd->xfer_next;
|
|
}
|
|
|
|
epipe->isoc.cur_xfers++;
|
|
epipe->isoc.next_frame = frindex;
|
|
|
|
ehci_add_intr_list(sc, exfer);
|
|
xfer->ux_status = USBD_IN_PROGRESS;
|
|
mutex_exit(&sc->sc_lock);
|
|
|
|
return USBD_IN_PROGRESS;
|
|
}
|
|
|
|
Static void
|
|
ehci_device_isoc_abort(struct usbd_xfer *xfer)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("xfer = %#jx", (uintptr_t)xfer, 0, 0, 0);
|
|
ehci_abort_isoc_xfer(xfer, USBD_CANCELLED);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_isoc_close(struct usbd_pipe *pipe)
|
|
{
|
|
EHCIHIST_FUNC(); EHCIHIST_CALLED();
|
|
|
|
DPRINTF("nothing in the pipe to free?", 0, 0, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
ehci_device_isoc_done(struct usbd_xfer *xfer)
|
|
{
|
|
struct ehci_xfer *exfer = EHCI_XFER2EXFER(xfer);
|
|
ehci_softc_t *sc = EHCI_XFER2SC(xfer);
|
|
struct ehci_pipe *epipe = EHCI_XFER2EPIPE(xfer);
|
|
|
|
KASSERT(mutex_owned(&sc->sc_lock));
|
|
|
|
epipe->isoc.cur_xfers--;
|
|
ehci_remove_itd_chain(sc, exfer->ex_sitdstart);
|
|
usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length,
|
|
BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
|
|
}
|