NetBSD/sys/dev/usb/auvitek_board.c

127 lines
3.8 KiB
C

/* $NetBSD: auvitek_board.c,v 1.3 2011/07/09 15:00:44 jmcneill Exp $ */
/*-
* Copyright (c) 2010 Jared D. McNeill <jmcneill@invisible.ca>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Auvitek AU0828 USB controller - board specific initialization
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: auvitek_board.c,v 1.3 2011/07/09 15:00:44 jmcneill Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/auvitekreg.h>
#include <dev/usb/auvitekvar.h>
static const struct auvitek_board_config {
uint16_t reset;
uint16_t enable;
uint8_t clkdiv;
} auvitek_board_config[] = {
[AUVITEK_BOARD_HVR_850] = {
.reset = 0x02b0,
.enable = 0x02f0,
.clkdiv = AU0828_I2C_CLKDIV_30,
},
[AUVITEK_BOARD_HVR_950Q] = {
.reset = 0x02b0,
.enable = 0x02f0,
.clkdiv = AU0828_I2C_CLKDIV_30,
},
};
void
auvitek_board_init(struct auvitek_softc *sc)
{
uint16_t reset, enable;
/* power up device */
auvitek_write_1(sc, AU0828_REG_POWER_CTL, AU0828_POWER_EN);
reset = auvitek_board_config[sc->sc_board].reset;
enable = auvitek_board_config[sc->sc_board].enable;
/* stash i2c clock divider in softc */
sc->sc_i2c_clkdiv = auvitek_board_config[sc->sc_board].clkdiv;
/* configure gpio, if requested */
if (reset) {
auvitek_write_1(sc, AU0828_REG_GPIO2_PINDIR, reset >> 8);
auvitek_write_1(sc, AU0828_REG_GPIO1_PINDIR, reset & 0xff);
auvitek_write_1(sc, AU0828_REG_GPIO2_OUTEN, 0);
auvitek_write_1(sc, AU0828_REG_GPIO1_OUTEN, 0);
delay(100000);
}
if (enable) {
auvitek_write_1(sc, AU0828_REG_GPIO2_PINDIR, enable >> 8);
auvitek_write_1(sc, AU0828_REG_GPIO1_PINDIR, enable & 0xff);
auvitek_write_1(sc, AU0828_REG_GPIO2_OUTEN, enable >> 8);
auvitek_write_1(sc, AU0828_REG_GPIO1_OUTEN, enable & 0xff);
delay(250000);
}
}
int
auvitek_board_tuner_reset(void *priv)
{
struct auvitek_softc *sc = priv;
uint8_t val;
switch (sc->sc_board) {
case AUVITEK_BOARD_HVR_850:
case AUVITEK_BOARD_HVR_950Q:
val = auvitek_read_1(sc, AU0828_REG_GPIO2_OUTEN);
val &= ~2;
auvitek_write_1(sc, AU0828_REG_GPIO2_OUTEN, val);
delay(10000);
val = auvitek_read_1(sc, AU0828_REG_GPIO2_OUTEN);
val |= 2;
auvitek_write_1(sc, AU0828_REG_GPIO2_OUTEN, val);
delay(10000);
break;
}
return 0;
}
unsigned int
auvitek_board_get_if_frequency(struct auvitek_softc *sc)
{
return 6000000; /* 6MHz */
}